Scribd
Upload
152 views

Mac List

The document lists various machines, equipment, vehicles and tools for drilling and construction work. Under machines and equipment, it lists 4 drilling rig models from YWE and Xuanhua Zhengyuan with specifications for boring depths and dimensions. It also lists an Ingersoll Rand 750 air compressor, 2 grout agitator mixer models, a Graco Husky pump, vane shear equipment, Mackintosh probes, and GPS units. Under vehicles it lists various Toyota and Hino trucks and lorries. The document provides an inventory of resources for drilling, boring, mixing, and general construction tasks.

Uploaded by

Hariman Salleh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
152 views

Mac List

The document lists various machines, equipment, vehicles and tools for drilling and construction work. Under machines and equipment, it lists 4 drilling rig models from YWE and Xuanhua Zhengyuan with specifications for boring depths and dimensions. It also lists an Ingersoll Rand 750 air compressor, 2 grout agitator mixer models, a Graco Husky pump, vane shear equipment, Mackintosh probes, and GPS units. Under vehicles it lists various Toyota and Hino trucks and lorries. The document provides an inventory of resources for drilling, boring, mixing, and general construction tasks.

Uploaded by

Hariman Salleh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

LIST OF MACHINES & EQUIPMENTS

1) Drilling Rigs

1.1) 2 unit of YWE D90 Boring Machine


with complete accessories – Maximum depth: 100m
1.2) 4 units of YWE D45 Machine
With complete accessories – Maximum depth :60m
1.3) 400C Crawler Hydraulic Drill Rig
400C from Xuanhua Zhengyuan company is a hydraulic driven
multi-purpose rig, could be used for mud and air drilling, in
another words, rotary drilling and hammer drilling, the diameter
of the hole is 05mm-400mm, and the max drilling depth is 250m.

GENERAL SPEC

 Dimension: Length x width x height= 5730mm x


2080mm x 2770mm
 Gross Weight: 8.5t
 Mast: carrying capacity: 12t; length: 5.7m; width:
470mm
 Rig Chassis: length: 4.92m, width: 2080mm
 Swivel: rotary speed: 0-132rpm, torque: 5700N .m
 Level Jacks: four 800rnmjourney hydr. jacks
 Hydraulic Wrench: journey: 350mm, torque:
12300N.m
400C CRAWLER HYDRAULIC DRILL RIG CERTIFICATE
1.4) HDM – CD28 (R60 ROTATOR)
HOLY ENGINEERING WORKS (M) SDN. BHD. company
is a hydraulic driven multi-purpose rig, could be used for
mud and air drilling, in another words, rotary drilling and
hammer drilling, the diameter of the hole is 05mm-300mm,
and the max drilling depth is 200m.

Engine MODEL: HDM-CD28{R60 ROTATOR


Model No
Cooling Type Cummins 4BT or equivalent
Fuel Used Water
Diesel
Hvdraulic Pump
Main Pump
Max. Con't Pressure Triple Pump
Max. Flow Rate 210 bar (3000 psi)
Oil Tank Capacity 227 litre/ min
90 litre

Mast
Total Height 6200 mm
Max. Feed Stroke 4000 mm
Max. Pull Down Force 4600 kg
Max. Retract Force 6700 kg
Fine Feed Pull Down 0 - 7246 mm/ min
Retract 0 - 8915 mm/ min

Rapid Feed Pull Down 0 - 21844 mm/ min


Retract 0 - 26746 mm/ min
Crawler

Trimming Speed 3 km/lu-


Ground Clearance 200 mm
Total Width 1676 mm
Track Width 300 nun
Axle Distance 1500 mm

Rotator (R60)ꞏ
Type Hollow Spindle Double Motor
Motor In Series Mode
Speed 62rpm
120 rpm
Torque 4705 Nm
2440Nm
Motor In Parallel Mode
Speed 31 rpm
60 rpm
Torque 9410 Nm
4880 Nm
2) AIR COMPRESSOR

The Ingersoll Rand 750 air compressor is a portable, diesel,


rotary screw compressor from Doosan Portable Power. The
equipment has been produced by Ingersoll Rand (now a
part of Doosan Group) for quite a few years and has been a
key part of various factories, industrial sites and job sites
across the world.

 Type: Rotary Screw Compressor


 CFM: 750
 Pressure: 80 – 175 psi
 Rated Operating Pressure: 150 psi
 Cylinders: 6
 RPM: 2000
 PM (Idle): 1200
 Engine Model: Cummins – QSC 8.3
 Portable: Yes (trailer mounted, heavy-duty tandem axle running
gear)
 Size: 5-meter (length) x 2.3 meter (width) x 2.2 meter (height)
 Fuel Tank Capacity: 105 gallons or 397 liters
 Gross Weight: 5 tonnes
3.a) HDM – GROUT AGITATOR SL 500

 Engine: Vikyno Diesel Engine (Vietnam)

 Model: RV125-N

 Power: 12.5 HP

 Engine RPM: max. 2200rpm

 Concrete Tank Volume: 500 litres

 Blade Rotation: max. 90 rpm

 Dimension: 1450mm (W) x 1750mm (L) x 1450mm (H, 1850mm with

200L water tank)

 Gross Weight: 350 kg


3.b) LMA400D – HIGH SPEED GROUT MIXER
1 UNIT

LMA400D grout mixer is a high speed & high-efficiency grout


mixer. It could be used as a high-speed mixer and agitator. The unit
will rapidly and efficiently mix various types of grouts which can
include cement, bentonite, and sand. It is specially designed for
cement mixing and grouting in ground/underground engineering.
We also can design the mixer with agitator separately, to make the
mixing work continuously.

 Engine: Chang Fa Diesel Engine (China)

 Model: CFZI12E2

 Diesel Power: 12 HP

 Engine RPM: max. 2200rpm

 Concrete Tank Volume: 400 litres

 Blade Rotation/impeller speed: max. 1500 rpm

 Dimension: 1650mm (W) x 1600mm (L) x 1200mm (H, 1630mm with

30L water tank)

 Gross Weight: 300 kg


4) GRACO – HUSKY PUMP 2150 1 UNIT

5) VANE SHEAR EQUIPMENT 1 SETS

6) MACKINTOSH PROBE 4 SETS


7) GPS - Garmin Gpsmap 78s 5 Nos

8) Electrical Insulation tester 1 set

9) Electrical Earthing Tester 1 set


LIST OF VEHICLES

a) Toyota Hilux Double Cab 1 unit

b) Hino Lorry 3-ton 1 unit


c) Toyota Hilux Single Cab 1 unit

d) Toyota Lorry 2-ton 1 unit

e) Toyota Hilux Double Cabin 1 Unit

You might also like