Scribd
Upload
474 views

Manual MXR Super Comp

Uploaded by

Ezequiel Walter
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
474 views

Manual MXR Super Comp

Uploaded by

Ezequiel Walter
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

M132 SUPER COMP

92503001858 revD
M132 SUPER COMP
DESCRIPTION POWER DIRECTIONS SPECIFICATIONS 
• Classic Dyna Comp® style The MXR Super Comp is • Run a cable from your guitar • Rotate the ATTACK LEVEL knob Input Impedance 1 MΩ
compression powered by one 9-volt battery to the Super Comp’s INPUT clockwise to reduce volume Output Impedance 10 kΩ
• Attack Level control preserves (remove bottom plate to install), jack and another cable from attenuation of note upon attack Nominal Input Level -5 dBV
attack volume without a 9-volt AC adapter such as the the Super Comp’s OUTPUT or counterclockwise to increase Nominal Output Level -12 dBV
sacrificing sustain Dunlop ECB003/ECB003E, or a jack to your amplifier. it. For the classic Dyna Comp
Noise Floor* -95 dBV
DC Brick™ power supply. • Start with all controls at sound, rotate this control fully
• Compatible with the T.H.D 0.2% Typ. at -20 dBV, 1 kHz
12 o’clock. counterclockwise.
hottest pickups Maximum Compression 36 dB
• Turn the effect on by depressing • Rotate the SENSITIVITY knob
clockwise to increase amount of Attack Time 5 ms
the footswitch. Release Time 1s
compression or counterclockwise
• Rotate the OUTPUT knob
to decrease it. Bypass True Hardwire
clockwise to increase
overall effect volume or Current Draw 3.3 mA
CONTROLS counterclockwise to decrease it. Power Supply 9 volts DC
*A-weighted
OUTPUT knob controls
overall effect volume
ATTACK LEVEL knob sets
attack attenuation level
SENSITIVITY knob sets overall
amount of compression SAMPLE SETTINGS
FOOTSWITCH toggles
effect on/bypass (red LED LIGHT COMP HEAVY SQUISH DIMED TWEED
indicates on)

DUNLOP MANUFACTURING, INC.


P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658

You might also like