2013 525 - 40 ft AIR DRILL

Assembly And Parts Manual

:
http:// texagropark.ru/

. 903-030-15-51
E-mail: [email protected]
[email protected]

« » 396336 .,
- , . , . 7.
( 4« » 519 – ) ./ 8 (473)
233-28-17
E-mail: [email protected]
 525 - 40ft Assembly and Parts Manual 2013

Table of Contents
General Information
Salford Recommended Torque Values..........................................................................................................5
Wheel Torque Specifications........................................................................................................................6
Tire Pressure Ratings....................................................................................................................................7
General Safety Precautions...........................................................................................................................8
Frame Assembly
Frame and Wing Assembly.........................................................................................................................10
Wheels and Axles
Main Front Axle Installation.......................................................................................................................12
Main Rear Axle Installation........................................................................................................................14
Wing Front Axle Installation.......................................................................................................................16
Wing Rear Axle Installation........................................................................................................................18
Main Frame Axle Parts...............................................................................................................................20
Wing Axle Parts..........................................................................................................................................22
8000LB Hub & Spindle Assembly.............................................................................................................24
5500LB Hub & Spindle Assembly.............................................................................................................26
5000LB Hub & Spindle Assembly.............................................................................................................28
Tongue Assembly
Tongue Installation......................................................................................................................................30
Operator Station Assembly.........................................................................................................................32
Coulters and Double Disc Openers
Opener Mounting........................................................................................................................................33
Opener Front Section Parts.........................................................................................................................34
Opener Rear Section Parts..........................................................................................................................36
Coil-Tech Coulters......................................................................................................................................38
Coil-Tech Hub.............................................................................................................................................40
525-40’ 7.5” Coulter and Opener Layout...................................................................................................42
525-40’ 7.5” Opener Layout with 15” Fertilizer Openers..........................................................................44
525-40’ 10” Opener Layout with 2” Offset Fertilizer Coulters..................................................................46
525-40’ 10” Opener Layout with 2” Offset Fertilizer Openers..................................................................48
Air Distribution
6 Tower Opener Air Distribution Layout....................................................................................................50
6 Tower Fertilizer Air Distribution Layout.................................................................................................52
8 Tower Opener Air Distribution Layout....................................................................................................54
8 Tower Fertilizer Air Distribution Layout.................................................................................................56
Air Distribution Parts..................................................................................................................................58
Tow Hitch
Rigid Tow Hitch Assembly.........................................................................................................................60
Floating Tow Hitch Assembly.....................................................................................................................62
Tow Hitch Hydraulics.................................................................................................................................64
Hydraulics & Electrical
Depth Control and Work Switch Installation..............................................................................................66
Hydraulic Components Installation............................................................................................................68
Axle Lift Hydraulics ..................................................................................................................................70
Wing Fold Hydraulics ................................................................................................................................72
Lights & SMV Install..................................................................................................................................74

Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Markers
Optional Marker Installation . .....................................................................................................................76
Decals
Decal Installation Layout . ..........................................................................................................................78
Decal Parts List . .........................................................................................................................................80
Decal Legend . ............................................................................................................................................81

:
http:// texagropark.ru/

03-2013 Salford Farm Machinery Ltd. Page 3

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

Notes

:
http:// texagropark.ru/

Page 4 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

General Information
Salford Recommended Torque Values

6$/)25'5(&200(1'('72548(9$/8(6

*5$'( *5$'( *5$'(

%2/76,=(
IWOEV 1P IWOEV 1P IWOEV 1P
1&      
1&      
1&      
1&      
1&      

127(67KHVHUHFRPPHQGHGWRUTXHYDOXHVDUHDSSOLFDEOHZKHQDSSOLHGWRWKHQXW
RQO\7KHVHUHFRPPHQGHGWRUTXHYDOXHVDUHDSSUR[LPDWHRQO\7KHWRUTXHWHQVLRQ
UHODWLRQVKLSLVDIIHFWHGE\OXEULFDWLRQVXUIDFHILQLVKWKUHDGILWSODWLQJORFNZDVKHUVHWF
'2127XVHWKHVHYDOXHVLIDGLIIHUHQWWRUTXHYDOXHRUWLJKWHQLQJSURFHGXUHLVJLYHQIRU
DVSHFLILFDSSOLFDWLRQ7RUTXHYDOXHVOLVWHGDUHIRUJHQHUDOXVHRQO\&KHFNWLJKWQHVVRI
IDVWHQHUVSHULRGLFDOO\
6KHDUEROWVDUHGHVLJQHGWRIDLOXQGHUSUHGHWHUPLQHGORDGV$OZD\VUHSODFHVKHDUEROWV
ZLWKLGHQWLFDOJUDGH
)DVWHQHUVVKRXOGEHUHSODFHGZLWKWKHVDPHRUKLJKHUJUDGH,IKLJKHUJUDGHIDVWHQHUV
DUHXVHGWKHVHVKRXOGRQO\EHWLJKWHQHGWRWKHVWUHQJWKRIWKHRULJLQDO
0DNHVXUHIDVWHQHUVWKUHDGVDUHFOHDQDQGWKDW\RXSURSHUO\VWDUWWKUHDGHQJDJHPHQW
7KLVZLOOSUHYHQWWKHPIURPIDLOLQJZKHQWLJKWHQLQJ

:$51,1* %RWKVLGHVRIWKHXEROW
'RQRWWLJKWHQRQHVLGHRIWKH PXVWEHWLJKWHQHGHTXDOO\
XEROWEHIRUHWKHRWKHUVLGH

03-2013 Salford Farm Machinery Ltd. Page 5

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

Wheel Torque Specifications

WARNING Maintain proper torque to provide safe and secure

attachment of the wheel hub/drum. Improperly tightened
wheel nuts can cause the wheel to separate from the wheel mounting surface
during operation. This could result in property damage, serious personal injury,
or possibly loss of life.

NOTE - If wheel does not have chamfers to match profile of the nuts, use flat side of
nuts against rim face.

Install all lug nuts/bolts by hand to prevent cross threading and tighten lug nuts/bolts
following the steps and tightening sequence diagram below.

STEP 1) Torque to 20-25 ft•lbs following the appropriate pattern below.

STEP 2) Torque to 55-60 ft•lbs following the appropriate pattern below.
STEP 3) Torque to final ft•lbs rating (see bolt size below) following the
appropriate pattern below.

Bolt Size (Hub Size) Final Torque

1/2" dia. bolt (up to 3000 lb hubs) 85 ft•lbs
9/16" dia. bolt (4000 - 5000 lb hubs) 120 ft•lbs
5/8" dia. bolt (5500 - 12000 lb hubs) 170 ft•lbs
3/4" dia. bolt (16000 - 20000 lb hubs) 300 ft•lbs
7/8" dia. bolt (25000 lb hubs) 450-500 ft•lbs

Lug Nut/Bolt Tightening Sequence

6 LUG BOLT PATTERN 8 LUG BOLT PATTERN 10 LUG BOLT PATTERN

1 1 1
3 10
3 8
3 6
5 8

5 6

7 6
5 4
7 4
9 4
2 2 2

NOTE - Recheck the torque settings of lug nuts/bolts after 10km (6 miles) and again
after 50km (30 miles). Periodically and at the beginning of each season check the
condition and the torque of the lug nuts/bolts.

Page 6 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Tire Pressure Ratings

NOTE: NOTE:
CONE SIDE OF NUT FLAT SIDE OF SPACER
IN CONED HOLE AGAINST RIM
A

ALWAYS ENSURE
DISH FACES HUB
A

TIRE SIZE DIMENSION TORQUE PSI (bar)

A (cm) ft/lbs (Nm) MAX
550/45 R22.5 8"(20) 170 (230) 30 (2.06)
28L R26 14"(35.5) 300 (406) 28 (1.93)
30.5 R 26 14"(35.5) 300 (406) 25 (1.72)
31/13.5L R15

DIMENSION TORQUE PSI (bar)

TIRE SIZE A (cm) ft/lbs (Nm) MAX
31/13.5L R15 4.75"(12) 120 (162) 75 (5.17)
22.5/16.1 R 4"(10) 170 (230) 22 (1.51) ALWAYS POINT TREADS
TOWARDS THE REAR OF
32/15.5 R16.5 3.5"(9) 170 (230) 90 (6.20) THE MACHINE FOR
23.1 R26 10"(10) 170 (230) 24 (1.65) TOWED IMPLEMENTS
19/45 R17 7.5"(19) 170 (230) 25 (1.72)

710/70 R42 DUAL 710/70 R42 10 BOLT DUAL 710/70 R42 12 BOLT
TORQUE: 300 ft/lbs 42PSI TORQUE: 450-500 ft/lbs 42PSI TORQUE: 450-500 ft/lbs 42PSI
(406 Nm bar 2.89) (Nm 31-34.4 bar 2.89) (Nm 31-34.4 bar 2.89)

20000 lbs 25000 lbs 35000 lbs

03-2013 Salford Farm Machinery Ltd. Page 7

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

General Safety Precautions

Signal Words
The words DANGER, WARNING or CAUTION are
used with the safety alert symbol. Learn to
recognize the safety alerts, and follow the
recommended precautions and safe practices.

Three words are used in conjunction with the safety-alert symbol:

DANGER Indicates an imminently hazardous situation that, if not

avoided, will cause DEATH OR VERY SERIOUS INJURY.

WARNING Indicates a potentially hazardous situation that, if not

avoided, could cause DEATH OR SERIOUS INJURY.

CAUTION Indicates a potentially hazardous situation that, if not

avoided, may result in MINOR or MODERATE INJURY.

Replace any DANGER, WARNING, CAUTION or

instructional decal that is not readable or is missing.
The location and part number of these
decals is identified later in this section of the
manual.
The words Important and Note are not related to
personal safety but are used to give
additional information and tips for
operating or servicing this equipment.
IMPORTANT: Identifies special instructions or
pr oc edur es whic h, if not s tr ic tl y
observed could result in damage to, or
destruction of the machine, process or
its surroundings.
NOTE: Indicates points of particular interest for more efficient and convenient repair or operation.

A CAREFUL OPERATOR IS THE BEST INSURANCE AGAINST AN ACCIDENT !

Page 8 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

General Safety Precautions

DANGER

• Wings may fall rapidly

causing injury.
• Always stay clear of wings
when being lowered, raised
or in a elevated state.
• Always use lockup device
provided when raised.
• Ensure cylinder is completely
filled with hydraulic fluid to
avoid unexpected
movement.

DANGER
Hydraulics
• DO NOT search for high pressure hydraulic
leaks without hand and face protection. A
tiny, almost invisible leak can penetrate skin,
thereby requiring immediate medical
attention.
• Use cardboard or wood to detect leaks – never
your hands.
• Double check that all is clear before
operating hydraulics.
• Never remove hydraulic hoses or ends
with machine elevated. Relieve hydraulic
pressure before disconnecting hydraulic
hoses or ends.
• Maintain proper hydraulic fluid levels.
• Keep all connectors clean for positive connections.
• Ensure all fittings and hoses are in good condition.
• Do not stand under wings.
General O

03-2013 Salford Farm Machinery Ltd. Page 9

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

Frame Assembly
Frame and Wing Assembly

5 8 Ports on wing fold cylinders

face to inside of machine

See wing fold

hydraulics for cylinders

12
10
9 7 6

11
13

2 3 1 14

Page 10 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Frame and Wing Assembly

ITEM QTY PART NO. DESCRIPTION

1 4 GPH2401000F 1 1/2" x 10 7/8" LG. AXLE PIN - HARDENED
2 4 B1015 5/8 X 1 1/2" PLATED BOLT
3 4 BL10 5/8" LOCKWASHER
4 4 GF1610 1/8" NPT GREASE FITTING
5 4 GPHF2000312H05 1 1/4" x 3 1/2" SHOULDER PIN HARDENED W/ FLATS
6 4 GPH2000612A06 1 1/4" x 6 1/2" HARDENED PIN - 2 HOLES
7 8 BF20S 1 1/4" SAE WASHER
8 4 BSC0520 5/16" x 2" COTTER PIN
9 8 BSC0620 3/8" x 2" COTTER PIN
10 4 FL01527 525-60'/70' WING LOCK
11 8 B0820 1/2" NC x 2" LG. HEX BOLT GR. 5
12 8 BN08L 1/2" NYLOCK NUT NC
13 4 GP1600714C04 1" x 7 1/4" HITCH PIN
14 8 GBB175150200 1 3/4" x 1 1/2" x 2" LG. HARD BUSHING

:
http:// texagropark.ru/

03-2013 Salford Farm Machinery Ltd. Page 11

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

Wheels and Axles

Main Front Axle Installation
Set to 54" pin to pin for
9 32 8 standard tires, set to 52"
7 pin to pin for optional tires.

IMPORTANT
Rotate cylinder gland so 35 34 33
the port is towards the
top. If the port is
towards the side the
fitting will get broken off.

2
30 31 19 41
1
17
23 33 34 35
25 24

11
28 43 42
6
38 39 40
27 26
18 22
4

20 21
36
37

10

LH RH
Complete caster assy
12 13

16
Optional 550/45-
22.5 tires 29 22
15
Standard
19/45-17 tires

Use this hole 14

Page 12 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Main Front Axle Installation

ITEM QTY PART NO. DESCRIPTION
1 1 T01653L 525-40' MAIN FRONT AXLE LOWER ARM - LH
2 1 T01653R 525-40' MAIN FRONT AXLE LOWER ARM - RH
3 2 T01418 525-60'/70' MAIN FRONT AXLE UPPER ARM
4 1 T01666L 525-40' MAIN CASTER KNUCKLE - LH
5 1 T01666R 525-40' MAIN CASTER KNUCKLE - RH
6 2 T01018 520 3" FRONT CASTER BRAKE RETAINER
7 2 HSR4012BBJ 4'' x 12” BALL JOINT REPHASING CYLINDER
8 2 A60039 2 1/2" TURNBUCKLE 42" TUBE
9 2 T01659 525-40' MAIN FRONT AXLE CYLINDER LUG
10 2 T01073 520 CASTER WASHER 3" SHAFT
11 2 P20012 4 1/2" DIA. x 1/2" CAP
12 1 T01633L 525-40' MAIN CASTER ASSY - LH
13 1 T01633R 525-40' MAIN CASTER ASSY - RH
14 4 GW8000A 8000 lb GREASABLE HUB AND 14" SPINDLE ASSY
15 4 GW19/45-17 19.0/45-17 TIRE & 8 BOLT WHEEL
16 4 GW550/45-22.5-12 550/45-22.5 16 PLY TIRE & 8 BOLT WHEEL
17 4 GPHF3200512H08 2" x 5 1/2" SHOULDER PIN W/ FLATS
18 10 GPH2401312F 1 1/2" x 13 7/8" LG. AXLE PIN - HARDENED
19 2 GPH2401000F 1 1/2" x 10 7/8" LG. AXLE PIN - HARDENED
20 2 GP1600414C04 1" x 4 1/4" RING & WASHER PIN
21 2 GHP6 #6 HAIR PIN
22 14 BN10L 5/8" NYLOCK NUT NC
23 4 GF1610 1/8" NPT GREASE FITTING
24 4 B0815 1/2" NC x 1 1/2" LG. HEX BOLT GR. 5
25 4 BL08 1/2" SPRING WASHER
26 12 B0820 1/2" NC x 2" LG. HEX BOLT GR. 5
27 12 BN08S 1/2"-13NC STOVER LOCK NUT
28 8 GF1688 1/8" NPT GREASE FITTING 45deg
29 4 B1045 5/8 x 4-1/2" LG. HEX BOLT
30 2 B1015 5/8 X 1 1/2" PLATED BOLT
31 2 BL10 5/8" LOCKWASHER
32 2 C10716 2 1/2" TURNBUCKLE LOCK
33 4 GPH20006A06 1 1/4" x 6" HARDENED PIN - 2 HOLES
34 8 GM30 1 1/4" MACHINE BUSHING
35 8 BSC0520 5/16" x 2" COTTER PIN
36 4 P20001 3 1/2" OD x 3" ID x 6 1/2" NYLON BUSHING
37 2 T01190 3" OD x 6" LG SPACER FOR CASTER BUSHING
38 4 ZD271342 2 3/4" OD x 2.02" ID x 1 7/16" LG. LOCKING COLLAR
39 4 B0835 1/2" UNC HEX BOLT GR.5 PLATED
40 4 BN08L 1/2" NYLOCK NUT NC
41 4 GBB175150075 1 3/4" x 1 1/2" x 3/4" LG. HARD BUSHING
42 20 GBB175150100 1 3/4" x 1 1/2" x 1" LG. HARD BUSHING
43 24 GBB175150200 1 3/4" x 1 1/2" x 2" LG. HARD BUSHING

03-2013 Salford Farm Machinery Ltd. Page 13

 Page 14
2
Set to 62 1/2" pin to pin for standard tires,
set to 61" pin to pin for optional tires.
Return to Contents

13 10 16 17

11 16 17
12 19 20

Aim hydraulic fittings

to inside of machine

3
1
15

Complete
axle assy 4

Salford Farm Machinery Ltd.

525 - 40ft Assembly and Parts Manual 2013

14 8 23 24 23
Main Rear Axle Installation

22 21

9
6
Standard
19/45-17 tires

14 18
7 Optional 550/45-
22.5 tires

03-2013
5 Use this hole
 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Main Rear Axle Installation

ITEM QTY PART NO. DESCRIPTION
1 2 T01636 525 MAIN REAR AXLE TOWER
2 2 A60031 2 1/2" TURNBUCKLE 50" TUBE
3 2 HSR4512BBJ 4 1/2'' x 12” BALL JOINT REPHASING CYLINDER
4 1 T01634 525-40' REAR AXLE ASSEMBLY
5 4 GW8000A 8000 lb GREASABLE HUB AND 14" SPINDLE ASSY
6 4 GW19/45-17 19.0/45-17 TIRE & 8 BOLT WHEEL
7 4 GW550/45-22.5-12 550/45-22.5 16 PLY TIRE & 8 BOLT WHEEL
8 2 GPH3201434F 2" x 14 3/4" LG. AXLE PIN - HARDENED
9 4 GPHF3200512H08 2" x 5 1/2" SHOULDER PIN W/ FLATS
10 2 GPH2000612A06 1 1/4" x 6 1/2" HARDENED PIN - 2 HOLES
11 2 GPH20006A06 1 1/4" x 6" HARDENED PIN - 2 HOLES
12 4 ZD271342 2 3/4" OD x 2.02" ID x 1 7/16" LG. LOCKING COLLAR
13 2 C10716 2 1/2" TURNBUCKLE LOCK
14 6 BN10L 5/8" NYLOCK NUT NC
15 2 GF1613 1/8" NPT GREASE FITTING 90deg
16 8 GM30 1 1/4" MACHINE BUSHING
17 8 BSC0520 5/16" x 2" COTTER PIN
18 4 B1045 5/8 x 4-1/2" LG. HEX BOLT
19 4 B0835 1/2" UNC HEX BOLT GR.5 PLATED
20 4 BN08L 1/2" NYLOCK NUT NC
21 1 FL02085 525-40' TURNBUCKLE WRENCH
22 2 GHP11 #11 HAIR PIN
23 12 GBB225200100 2 1/4" x 2" x 1" LG. HARD BUSHING
24 4 GBB225200062 2 1/4" x 2" x 5/8" LG. HARD BUSHING

To adjust axle tower brace turnbuckles, machine should be

lowered completely so there is no load on the turnbuckles.
CAUTION Unpin one turnbuckle then adjust both to the desired length to
avoide twisting rear axle. OR, adjust both turnbuckles at the
same time.

03-2013 Salford Farm Machinery Ltd. Page 15

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

Wing Front Axle Installation

37 36 32 33 35 6 Set to 58" pin to pin

23 22 34 35

Upper arm must be

installed as shown to
prevent interference
with cylinder 41

5
24 25

2 40
11 42

9 29

39
10
38
26
RH LH
1
4 3
LH RH
20 27 28 Complete axle
16 17 assembly
9
18 19

8 21 27 28

Optional 19/45-17 tires

31 30

14
15

12 13 Complete axle
assembly
LH RH
Standard 31 x 13.5 x 15 tires

Page 16 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Wing Front Axle Installation

ITEM QTY PART NO. DESCRIPTION
1 1 T01638 525-40' WING FRONT AXLE LOWER ARM
2 1 T01425 525 WING AXLE UPPER PARALLEL ARM
3 1 T01582L 525-30FT WING CASTER WHEEL KNUCKLE - LH
4 1 T01582R 525-30FT WING CASTER WHEEL KNUCKLE - RH
5 1 T01639 525-40' FRONT WING AXLE ROCKER
6 1 A60024 1 1/4" TURNBUCKLE - 45" TUBE
7 1 HSR3512B 3 1/2" BORE x 12" STROKE REPHASING CYLINDER
8 1 T00483 7 3/4" OD 3 1/16" ID x 1/4" UHMW WASHER
9 2 P20001 3 1/2" OD x 3" ID x 6 1/2" NYLON BUSHING
10 1 T01190 3" OD x 6" LG SPACER FOR CASTER BUSHING
11 1 P20012 4 1/2" DIA. x 1/2" CAP
12 1 T01467L 525 WING CASTER AXLE ASSY FOR GW13156 TIRES - LH
A 13 1 T01467R 525 WING CASTER AXLE ASSY FOR GW13156 TIRES - RH
14 2 GW5000A 5000 LB HUB AND SPINDLE ASSEMBLY
15 2 GW13156 31 x 13.5L x 15 x 6 BOLT WHEEL & TIRE
16 1 T01465L 525 WING CASTER AXLE ASSY FOR GW19/45-17 TIRES - LH
17 1 T01465R 525 WING CASTER AXLE ASSY FOR GW19/45-17 TIRES - RH
B 18 2 GW5500A 5500 LB HUB AND SPINDLE ASSEMBLY
19 2 GW19/45-17 19.0/45-17 TIRE & 8 BOLT WHEEL
20 2 GPH2401000F 1 1/2" x 10 7/8" LG. AXLE PIN - HARDENED
21 2 GPH2400818F 1 1/2" x 8 1/8" LG. HARD PLATE PIN
22 2 GPHF2000312H05 1 1/4" x 3 1/2" SHOULDER PIN HARDENED W/ FLATS
23 2 BSC0520 5/16" x 2" COTTER PIN
24 2 BL08 1/2" SPRING WASHER
25 2 B0815 1/2" NC x 1 1/2" LG. HEX BOLT GR. 5
26 3 GF1688 1/8" NPT GREASE FITTING 45deg
27 4 B1015 5/8 X 1 1/2" PLATED BOLT
28 4 BL10 5/8" LOCKWASHER
29 1 GF1610 1/8" NPT GREASE FITTING
30 2 BN10L 5/8" NYLOCK NUT NC
31 2 B1040 5/8"NC x 4" LG. HEX BOLT
32 1 FL00051 TURNBUCKLE LOCK
33 1 GPHF1600338H04 1" x 3 3/8" SHOULDER PIN HARDENED W/FLATS
34 1 GP1600258H04 PIN 1" DIA. x 2 5/8" LG. WITH HEAD
35 2 BSC0415 1/4" x 1 1/2" COTTER PIN
36 1 GP0800312L03 1/2" x 3 1/2" L - PIN
37 1 GHP11 #11 HAIR PIN
38 8 GBB175150200 1 3/4" x 1 1/2" x 2" LG. HARD BUSHING
39 10 GBB175150075 1 3/4" x 1 1/2" x 3/4" LG. HARD BUSHING
40 2 GBB150125100 1 1/2" x 1 1/4" x 1" LG. HARD BUSHING
41 1 GBB125100100 1 1/4" x 1" x 1" LG. HARD BUSHING
42 1 GBB125100075 1 1/4" x 1" x 3/4" LG. HARD BUSHING

Quantities shown are for one front wing axle installation only.
A - for standard 31 x 13.5 x 15 tires
B - for optional 19/45-17 tires

03-2013 Salford Farm Machinery Ltd. Page 17

 Page 18
16 17 2 Set to 58" pin to pin
Return to Contents

18 19 20

15 17
Complete axle 9 8
assembly
23 RH LH
3

30
1

10

11
21 22 12 27 28 26

Optional 19/45-17 tires

Salford Farm Machinery Ltd.

14 13
525 - 40ft Assembly and Parts Manual 2013

29
Wing Rear Axle Installation

25 24

6 Complete axle
4 5
assembly
7 LH RH

Standard 31 x 13.5 x 15 tires

03-2013
 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Wing Rear Axle Installation

ITEM QTY PART NO. DESCRIPTION
1 1 HSR3212B 3 1/4" BORE x 12" STROKE REPHASING CYLINDER
2 1 A60024 1 1/4" TURNBUCKLE - 45" TUBE
3 1 T01435 525 BIFOLD WING REAR AXLE TOWER
4 1 T01468L 525 WING REAR AXLE ASSY FOR GW13156 TIRES - LH
A 5 1 T01468R 525 WING REAR AXLE ASSY FOR GW13156 TIRES - RH
6 2 GW5000A 5000 LB HUB AND SPINDLE ASSEMBLY
7 2 GW13156 31 x 13.5L x 15 x 6 BOLT WHEEL & TIRE
8 1 T01466L 525 WING REAR AXLE ASSY FOR GW19/45-17 TIRES - LH
9 1 T01466R 525 WING REAR AXLE ASSY FOR GW19/45-17 TIRES - RH
B
10 2 GW5500A 5500 LB HUB AND SPINDLE ASSEMBLY
11 2 GW19/45-17 19.0/45-17 TIRE & 8 BOLT WHEEL
12 1 GPH2401312F 1 1/2" x 13 7/8" LG. AXLE PIN - HARDENED
13 2 GPHF2000312H05 1 1/4" x 3 1/2" SHOULDER PIN HARDENED W/ FLATS
14 2 BSC0520 5/16" x 2" COTTER PIN
15 1 GPHF1600338H04 1" x 3 3/8" SHOULDER PIN HARDENED W/FLATS
16 1 GP1600258H04 PIN 1" DIA. x 2 5/8" LG. WITH HEAD
17 2 BSC0415 1/4" x 1 1/2" COTTER PIN
18 1 FL00051 TURNBUCKLE LOCK
19 1 GP0800312L03 1/2" x 3 1/2" L - PIN
20 1 GHP11 #11 HAIR PIN
21 1 BL10 5/8" LOCKWASHER
22 1 B1015 5/8 X 1 1/2" PLATED BOLT
23 1 GF1613 1/8" NPT GREASE FITTING 90deg
24 2 B1040 5/8"NC x 4" LG. HEX BOLT
25 2 BN10L 5/8" NYLOCK NUT NC
26 2 GBB175150200 1 3/4" x 1 1/2" x 2" LG. HARD BUSHING
27 2 GBB175150100 1 3/4" x 1 1/2" x 1" LG. HARD BUSHING
28 2 GBB175150062 1 3/4" x 1 1/2" x 5/8" LG. HARD BUSHING
29 2 GBB150125100 1 1/2" x 1 1/4" x 1" LG. HARD BUSHING
30 2 GBB125100075 1 1/4" x 1" x 3/4" LG. HARD BUSHING

Quantities shown are for one rear wing axle installation only.
A - for standard 31 x 13.5 x 15 tires
B - for optional 19/45-17 tires

03-2013 Salford Farm Machinery Ltd. Page 19

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

Main Frame Axle Parts

FLAT SIDE TO BOTTOM

15 13
OR
11

14

12

16 10
AIM GREASE
FITTING TO 5
REAR 6
7 8

Page 20 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Main Frame Axle Parts

ITEM QTY PART NO. DESCRIPTION
1 1 T01665 525-40' MAIN CASTER
2 1 T01032L 520 16,000 LB TANDEM - LH
3 1 T01032R 520 16,000 LB TANDEM - RH
4 1 T01635 525-40' MAIN REAR AXLE
5 2 GB255204 10000 LB OUTER CUP
6 2 GB255814 10000 LB OUTER CONE
7 2 GW8110VC 8000 LB V-SEAL COUNTERFACE
8 2 GW8110VS 8000 LB V-SEAL
9 2 GW8110VW 8000 LB V-SEAL GRASS WRAP GUARD
10 2 ZD271015 TANDEM CASTER WHEEL BEARING SPACER
11 1 ZD271204 2 3/4" OD X 1.760" ID x 1 1/8" LG TANDEM CASTER
12 1 GPSPEC2801125 520 TANDEM PIN - 1 3/4" x 11 1/4" LG.
13 1 BN28SF 1 3/4" NF SLOTTED FLANGE NUT
14 1 GBB200175100 2" x 1 3/4" x 1" LG. HARD BUSHING
15 1 BSC0535 5/16" x 2" COTTER PIN
16 1 GF911 1/4"28NF x 90 DEGREE GREASE FITTING

2
3

03-2013 Salford Farm Machinery Ltd. Page 21

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

Wing Axle Parts

FLAT SIDE TO TOP

FOR GW19/45-17 TIRES

FLAT SIDE TO BOTTOM

FOR GW13156 TIRES

18 16
14

17

15

19

12
Aim grease fitting to
front on front axles, aim
to rear on rear axles
13

8
9
10
11

Page 22 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Wing Axle Parts

ITEM QTY PART NO. DESCRIPTION
1 1 T01427 525 HD WING CASTER
2 1 T01428L 525 WING REAR AXLE UPRIGHT - LH
3 1 T01428R 525 WING REAR AXLE UPRIGHT - RH
4 1 T01136L 520 TANDEM FOR 5500 HUBS - LH
5 1 T01136R 520 TANDEM FOR 5500 HUBS - RH
6 1 T01105L 520 TANDEM FOR 5000 LB HUBS - LH
7 1 T01105R 520 TANDEM FOR 5000 LB HUBS - RH
8 2 GB255204 10000 LB OUTER CUP
9 2 GB255814 10000 LB OUTER CONE
10 2 GW8110VC 8000 LB V-SEAL COUNTERFACE
11 2 GW8110VS 8000 LB V-SEAL
12 2 GW8110VW 8000 LB V-SEAL GRASS WRAP GUARD
13 2 ZD271015 TANDEM CASTER WHEEL BEARING SPACER
14 1 ZD271204 2 3/4" OD X 1.760" ID x 1 1/8" LG TANDEM CASTER
15 1 GPSPEC2801125 520 TANDEM PIN - 1 3/4" x 11 1/4" LG.
16 1 BN28SF 1 3/4" NF SLOTTED FLANGE NUT
17 1 GBB200175100 2" x 1 3/4" x 1" LG. HARD BUSHING
18 1 BSC0535 5/16" x 2" COTTER PIN
19 1 GF911 1/4"28NF x 90 DEGREE GREASE FITTING

2 3

4 5
6 7

03-2013 Salford Farm Machinery Ltd. Page 23

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

8000LB Hub & Spindle Assembly

12
8

10
7

11
5
6

16
4

8
3

7
2

14

4
3
2
13
17

6
5

12
4

8
3

7
2

6
5
1

4
3
2
15

Page 24 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

8000LB Hub & Spindle Assembly

ITEM NO. QTY PART NUMBER DESCRIPTION

1 1 GW8014 SPINDLE, 8 000 LBS.
2 1 GW8110VW 8000 LB V-SEAL GRASS WRAP GUARD
3 1 GW8110VS 8000 LB V-SEAL
4 1 GW8110VC 8000 LB V-SEAL COUNTERFACE
5 1 GB506849 8000 INNER CONE
6 1 GB506810 8000 INNER CUP
7 1 GB501310 8000 OUTER CUP
8 1 GB501349 8000 OUTER CONE
9 1 GW8108 1" SPINDLE WASHER
10 1 BN16S 1" SLOTTED HEX NUT
11 1 BSC0317 3/16" x 1 3/4" COTTER PIN
12 1 GW8112 8000 DUST CAP
13 8 BW1020 5/8" x 2" PRESS-IN WHEEL STUD
14 8 BW10 5/8" WHEEL LUG NUT
15 1 GW8000 8000 LB HUB WITH BEARINGS, V-SEAL, & DUSTCAP
16 1 GW8110V 8000 LB V-SEAL KIT
17 1 GW8111V 8000 LB BEARING WITH V-SEAL KIT

Entire assembly available as part number GW8000A (includes hub, spindle, bearings,
seal, dust cap, and hardware).

03-2013 Salford Farm Machinery Ltd. Page 25

 Page 26
V-Seal on hubs after February 14, 2011
Return to Contents

Note: V-seal will NOT fit older hubs

1

2 3 4 5 Radial grease seal on hubs

prior to February 11, 2011

14 5/8" wheel bolts on hubs

after February 14, 2011

16
9/16" wheel bolts
15 on hubs prior to
February 11, 2011

10
12
11
7
13
19 6

Salford Farm Machinery Ltd.

525 - 40ft Assembly and Parts Manual 2013

18
2 8
3
9
5500LB Hub & Spindle Assembly

4
7
6 2
8 3
9 4

03-2013
 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

5500LB Hub & Spindle Assembly

ITEM QTY PART NO. DESCRIPTION
1 1 GW5014 5000/5500 LB SPINDLE-14 IN. LG
2 1 GW5110VW 5000/5500 LB V-SEAL GRASS WRAP GUARD
3 1 GW5110VS 5000/5500 LB V-SEAL
4 1 GW5110VC 5000/5500 LB SEAL COUNTERFACE
* 5 1 GW5110 5000/5500 LB GREASE SEAL
6 1 GB603011 5000/5500 LB INNER CUP
7 1 GB603049 5000/5500 LB INNER CONE
8 1 GB48510 5000/5500 LB OUTER CUP, 3000 LB INNER CUP
9 1 GB48548 5000/5500 LB OUTER CONE, 3000 LB INNER CONE
10 1 BF16-9 1" HARD SAE FLAT WASHER GR.9 PLATED
11 1 BN16SF 1" NF SLOTTED HEX NUT
12 1 BSC0315 3/16" x 1 1/2" COTTER PIN
13 1 GW5112 5000/5500 LB DUST CAP
14 8 BW1015 5/8"-18 x 1 1/2" WHEEL BOLT
* 15 8 BW0912 9/16"-18 x 1 1/4" WHEEL BOLT
16 1 GF641 1/4"-28NF GREASE FITTING
GW5500 5500 LB HUB WITH BEARINGS, V-SEAL, DUST CAP
17 1 & WHEEL BOLTS
18 1 GW5110V 5000/5500 LB V-SEAL KIT
19 1 GW5111V 5000/5500 LB BEARING WITH V-SEAL KIT

* Used on hubs prior to February 11, 2011.

Entire assembly available as part number GW5500A (includes hub, spindle, bearings,
seal, dust cap, and hardware).

17

2
3
4
7
6

14
8
9
13

03-2013 Salford Farm Machinery Ltd. Page 27

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

5000LB Hub & Spindle Assembly

8
7
5

12
6

10

14
4

11
3

9
2

4
7

3
13

2
15

6
5
4
3

12
2

8
7
1

6
5
4
3
2
16

Page 28 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

5000LB Hub & Spindle Assembly

ITEM QTY PART NO. DESCRIPTION

1 1 GW5014 5000 LB SPINDLE-14 IN. LG
2 1 GW5110VW 5000 LB V-SEAL GRASS WRAP GUARD
3 1 GW5110VS 5000 LB V-SEAL
4 1 GW5110VC 5000 LB SEAL COUNTERFACE
5 1 GB603049 5000/5500 LB INNER CONE
6 1 GB603011 5000/5500 LB INNER CUP
7 1 GB48510 5000/5500 LB OUTER CUP, 3000 LB INNER CUP
8 1 GB48548 5000/5500 LB OUTER CONE, 3000 LB INNER CONE
9 1 BF16-9 1" HARD SAE FLAT WASHER GR.9 PLATED
10 1 BN16SF 1" NF SLOTTED HEX NUT
11 1 BSC0317 3/16" x 1 3/4" COTTER PIN
12 1 GW5112 5000/5500 LB DUST CAP
13 6 BW0912 9/16"-18 x 1 1/4" WHEEL BOLT
14 1 GW5110V 5000 LB V-SEAL KIT
15 1 GW5111V 5000 LB BEARING WITH V-SEAL KIT
16 1 GW5000B 5000 LB HUB WITH BEARINGS, SEAL, & DUST CAP

Complete assembly available as part number GW5000A (includes hub, spindle, bearings,
seals, dust cap, and hardware).

03-2013 Salford Farm Machinery Ltd. Page 29

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

Tongue Assembly
Tongue Installation

12
11
9
1

8
10

13
2

16
15

24
3

23
7

22
21

18
20
14

Cat. 3
17
6
5
19

Cat. 4
4

Page 30 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Tongue Installation

ITEM QTY PART NO. DESCRIPTION

1 1 T01660L 525-40' TONGUE MOUNT - LH
2 1 T01660R 525-40' TONGUE MOUNT - RH
3 1 T01654 525-30'/40' TONGUE
4 1 PPI-42XL CAT 4 CAST IRON HITCH
5 1 PPI-30XL CAT #3 CAST CLEVIS
6 1 PPI-208VR CLEVIS FOR CAT 3 HITCH
7 1 GJ5000S 5000 LB TONGUE JACK
8 2 GPH2400814F 1 1/2" x 8 1/4" LG. HARD PLATE PIN
9 12 B1630 1" NC x 3" LG. HEX BOLT GR.5
10 12 BN16L 1-8 NC NYLOCK NUT
11 2 B1015 5/8 X 1 1/2" PLATED BOLT
12 2 BL10 5/8" LOCKWASHER
13 2 GF1610 1/8" NPT GREASE FITTING
14 1 A60094A 520 OPERATOR STATION/HOSE HOLDER
15 2 BU1061 U-BOLT 5/8" x 6" x 5 1/2"
16 4 BN10L 5/8" NYLOCK NUT NC
17 1 B1255 3/4" NC x 5 1/2" LG. HEX BOLT GR. 5
18 1 BN12S 3/4" STOVER LOCK NUT
19 1 GJ35K48 35,000 LB SAFETY CHAIN - 48" LG.
20 2 B1680H 1" x 8" NC HEX BOLT GR.8
21 4 BF16HS 1" HARD STRUCTURAL WASHER
22 2 BN16C 1"- UNC STOVER LOCKNUT
23 1 GP100414C03 5/8'' DIA x 4 1/4'' PIN RING & WASHER
24 1 GHP11 #11 HAIR PIN

03-2013 Salford Farm Machinery Ltd. Page 31

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

Operator Station Assembly

ITEM QTY PART NO. DESCRIPTION
1 1 A60094 OPERATOR STATION/HOSE HOLDER
2 1 G106 HD OPERATORS MANUAL HOLDER
3 1 GL11750 LIGHT PLUG HOLDER - PLASTIC
4 4 P0160B HOSE CLAMP 4"
5 2 BC0630 3/8"NC x 3" LG. CARRIAGE BOLT
6 2 BN06L 3/8"-16NC LOCK NUT
7 5 BC0205 10-24 x 1/2" A307A LOW CARBON ZINC CARRIAGE BOLT
8 2 BF04 1/4" FLATWASHER
9 5 BN02L #10-24 NYLOCK NUT
10 1 A60095 MONITOR PLUG/CASE DRAIN HOLDER
11 2 BU0410 1/4 x 1" x 1 1/2" U-BOLT
12 4 BN04L 1/4" LOCK NUT
13 1 GDSW4 SAFE OPERATION LIST DECAL
14 1 GDSW700 WARNING STICKER ,HIGH PRESSURE FLUID HAZARD
15 1 GD210 HOSE IDENTIFICATION DECAL
#10, #11, #12 INSTALLED ON
MACHINES WITH A CASE DRAIN 2

6
15 14 13

5 4

9
3

8
7

11 NOTE: EXTRA #4 CLAMPS INSTALLED

ON MACHINES REQUIRING MORE
THAN TWO SETS OF HOSES

1 10 12

Page 32 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Coulters and Double Disc Openers

Opener Mounting

ITEM QTY PART NO. DESCRIPTION

1 1 BU1246 U-BOLT 3/4" x 4" x 7 1/2" LG.
2 2 BN12L 3/4" NC NYLOCK NUT
3 1 FL01207 PULL-UP PLATE FOR 500 OPENER
4 2 B1285 3/4"NC x 8 1/2" LG. HEX BOLT GR.5
5 2 BF12HS 3/4" HARD STRUCTURAL WASHER

Use bolts and pull-up plates

where opener is mounted
under an axle beam.
Most openers will
mount using u-bolts.

1 5

2 2

03-2013 Salford Farm Machinery Ltd. Page 33

 Page 34
14

16
Return to Contents

24 When inserting seed tube,

13 make sure tab is inserted
For 1 1/4" For 1" into hole.
air hose air hose
T00504 6
Opener parallel
6 2 31 Insert small spring into link bushing kit.
large spring when
33 installing. 7
30
27 9
17
20 22

7
15

15

Salford Farm Machinery Ltd.

2
525 - 40ft Assembly and Parts Manual 2013

1
7
Opener Front Section Parts

23
29 30 33 32 28 3 25 26 18 21 5 10
RH LH 4
IMPORTANT NOTE Whisker should be tight against the
See important note Install enough shims until blades blades when fully assembled with even
on following page. just briefly touch, pressure on both sides. 12
a slight loss of contact during Set lowest point on wisker 1/4" from
rotation is acceptable. intended seeding depth to ensure that it 8
Refer to operator manual for detailed rides on top of ground while in
opener blade contact setting. operation. 11 19

03-2013
 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Opener Front Section Parts

ITEM QTY. PART NO. DESCRIPTION
1 2 L01253 OPENER WHISKER CLAMP
2 5 BN06S 3/8"-16NC STOVER LOCK NUT
3 1 T00930 WIRE WHISKER FOR SALFORD DOUBLE DISC OPENER
4 1 T01611 2012 MOUNTING WELDMENT
5 1 T00444 SALFORD OPENER BOTTOM PARALLEL LINK
6 4 ZD071086 OPENER PARALLEL LINK BUSHING
7 8 GBB100075075 1" x 3/4" x 3/4" LG. HARD BUSHING
8 4 BN08SF 1/2"-13NC FLANGE STOVER LOCK NUT GR. 8
9 1 T00461 SALFORD OPENER TOP PARALLEL LINK
10 1 GSE0720 7/16" WIRE x 20 COILS 2 HOOK TAPERED SPRING
11 1 B1050 5/8 x 5" HEX BOLT
12 1 BN10L 5/8" NYLOCK NUT NC
13 1 T00464 SALFORD OPENER SEED TUBE
14 1 BN06L 3/8"-16NC LOCK NUT
15 4 B0860 1/2" UNC x 6" LG HEX BOLT GR.5 PLATED
16 1 BF06 3/8" FLATWASHER
17 1 T00450 TOP SPRING TENSION ROD
18 1 T00501 1/2" x 9" BLANK LENGTH L-PIN
19 1 T00460 LOWER SPRING TENSION BUSHING
20 1 GSE0173 OPENER INSIDE SPRING
21 1 GHP11 #11 HAIR PIN
22 1 BU1246 U-BOLT 3/4" x 4" x 7 1/2" LG.
23 2 BN12L 3/4" NC NYLOCK NUT
24 1 T01366 OPENER SEED TUBE FOR 1 1/4" HOSE
25 2 BC0620 3/8"NC x 2" CARRIAGE BOLT GR.2 PLATED
26 1 FL01703 2012 DISC OPENER GUARD/RND WHISKER MOUNT
27 1 T01533 SALFORD OPENER MAIN BODY
28 4 GM10 5/8" ID x 1" OD x .020 THICK SHIM
29 1 B1015 5/8 X 1 1/2" PLATED BOLT
30 1 B1015L 5/8" - 11NC x 1 1/2" LH THREAD HEX BOLT
31 3 BC0612 3/8" NC X 1 1/4" CARRIAGE BOLT GR2 PLATED
32 2 CT501540H 15" x 4MM SALFORD DBL/BEVEL BEARING BLADE
33 2 T01615 304 BEARING HUB CAP W/5/8" HOLE

NOTE:
Part number T00504 is a hard bushing replacing kit for opener

IMPORTANT NOTE:
The disc mounting bolts supplied are:
right-hand thread (Regular)
and left-hand thread Front view of opener
BOLTS MUST BE INSTALLED ON
THEIR PROPER SIDE!!

Right hand Left hand

thread bolt thread bolt
(Regular) B1015L
B1015

03-2013 Salford Farm Machinery Ltd. Page 35

 Page 36
6 2 29 21 1 7 12 22 27 28
Return to Contents

26

Press wheels shown

are optional. 25

24

12
23
5 8
4 11 9 10
20

Salford Farm Machinery Ltd.

19

Rear arm bushing kit

525 - 40ft Assembly and Parts Manual 2013

14 20
Opener Rear Section Parts

21
15 , 16 Are seed 13

firmer options
9 T00503
Ordering parts Note:
16 Includes 17 and 18 with
15
rebounder seed firmer kit.
18
For ordering Keeton seed firmer 15 kit
with hardware, use KCKESFOP 16
17

03-2013
 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Opener Rear Section Parts

ITEM QTY PART NO. DESCRIPTION
1 1 T00445 REAR PACKER WHEEL MOUNT
2 1 T00452 REAR PACKER WHEEL ADJUSTER
3 1 T00446 REAR PACKER WHEEL ARM
4 1 B1060 5/8"NC x 6" LG. HEX BOLT
5 1 BF10 5/8" FLAT WASHER
6 1 BN10J 5/8"NC JAM NUT GR. 5
7 2 BC0835H 1/2" X 13NC X 3-1/2" LG. CARRIAGE BOLT GR. 5 SHORT THREAD
8 1 C1071 2 HOOK CLEVIS SPRING 6" FL 1 1/4" OD
9 3 BF06 3/8" FLATWASHER
10 1 BN06 3/8 " LOCKNUT
11 1 BN06L 3/8"-16NC LOCK NUT
12 2 BN08L 1/2" NYLOCK NUT NC
13 1 B0615 3/8" X 1 1/2" LG. GRADE 5
14 1 B0612 3/8" X 1 1/4" LG. GRADE 5
15 1 T00403 KEETON SEED FIRMER FOR 15" BLADE
16 1 T01398 REBOUNDER SEED FIRMER
17 2 B0605 3/8" X 1/2" LG. GRADE 5 HEX BOLT
18 1 T01399 REBOUNDER SEED FIRMER BRACKET
19 1 T00574 SEED FIRMER/SCRAPER BRACKET
+ 20 2 A60018 NYLATRON SHOULDER BUSHING
+ 21 3 R0030 NYLON BUSHING 3/4" OD x 1/2" ID x 1.94 LG.
22 1 GP16060F 1" x 6" FLATBAR PIN FOR OPENER
23 1 T00463 3" x 13" DOUBLE RIB PACKER WHEEL
24 1 T00462 13" x 3" SINGLE RIB PACKER WHEEL
25 1 T00662 4" x 12" DOUBLE RIB PACKER WHEEL
26 1 T00663 6 1/2" x 12" SMOOTH SEMI-PNUEMATIC PRESS WHEEL
27 1 BN06S 3/8"-16NC STOVER LOCK NUT
28 1 BC0612 3/8" NC X 1 1/4" CARRIAGE BOLT GR2 PLATED
29 1 T00728 OPENER PACKER WHEEL HANDLE
NOTE:
Item Part number T00503 is rebuild kit for a rear packer wheel arm bushings
+ Included in T00503 rebuild kit

03-2013 Salford Farm Machinery Ltd. Page 37

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

Coil-Tech Coulters

2
7

3
11

12

8
8

1
4

9
10
13
5
6

Page 38 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Coil-Tech Coulters

ITEM QTY PART NO. DESCRIPTION

1 1 C90324 525 TALL COIL-TECH COULTER MOUNT
2 1 A8050LWA LEFT COIL WITH SPINDLE AND HUB
3 1 A8050RWA RIGHT COIL WITH SPINDLE AND HUB
4 1 C90325 525 SHORT COIL-TECH COULTER MOUNT
5 1 C90326LWA 525 SHORT LEFT COIL WITH SPINDLE AND HUB
6 1 C90326RWA 525 SHORT RIGHT COIL WITH SPINDLE AND HUB
7 1 B0832ST 1/2"-13NC x 3 1/4" SHORT THREAD BOLT
8 5 BN08S 1/2"-13NC STOVER LOCK NUT
9 1 CT512013 COIL-TECH COULTER 20" 13 WAVE 3/4" WAVE
10 1 CT5016R 16" RIPPLED COULTER BLADE
11 2 B1080 5/8 NC X 8 HEX BOLT GR.5 PLATED
12 2 BN10S 5/8" NC STOVER LOCK NUT
13 4 B0825 1/2" NC x 2 1/2" LG. HEX BOLT GR. 5
14 1 A8050LW LEFT COIL-TECH SPRING AND SPINDLE
15 1 A8050RW RIGHT COIL-TECH SPRING AND SPINDLE
16 1 C90326LW 525 SHORT LEFT COIL WITH SPINDLE
17 1 C90326RW 525 SHORT RIGHT COIL WITH SPINDLE

17
15
16
14

03-2013 Salford Farm Machinery Ltd. Page 39

 Page 40
Return to Contents

IMPORTANT
Recommended Install Procedure.
Note: Bearings must be properly grease packed.
1. Torque the spindle nut to 100 ft/lbs (135 Nm) to
11 10 properly seat the bearings in the races. Always rotate
the hub while tightening.
9 2. Back spindle nut off until it is just loose.
3. Re-torque to 40 (55 Nm) ft/lbs while rotating the hub.
12 4. Adjust the nut to align the nearest slot with the hole in
the spindle. Hub must be able to rotated relatively freely.
7 Also it should be tight enough so that it cannot slide
back and forth on the spindle more than .005" (0.13mm).
8

Available only as kit

C90101ATB which includes:
2 3 4 5 9
5

Salford Farm Machinery Ltd.

Coil-Tech Hub
525 - 40ft Assembly and Parts Manual 2013

4
13 Parts 2 - 5 available
3
only as kits 13 14 15 ,
not individually. 2

14
15

03-2013
 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Coil-Tech Hub
ITEM QTY. PART NO. DESCRIPTION
1 1 C90301 COULTER SPINDLE FOR TAPERED BEARINGS
2 1 - GRASS WRAP GUARD
3 1 - SEAL, GREASE AND DIRT
4 1 - SEAL COUNTERFACE
5 2 - 30208-J2/Q BEARING CUP & CONE ASSEMBLY
6 1 - CAST COIL-TECH COULTER HUB
7 1 GF641 1/4"-28NF GREASE FITTING
8 1 BSR0415 1/4" x 1 1/2" LG ROLL-PIN PLATED
9 1 C90102 DUST CAP
10 4 B0825 1/2" x 2 1/2" HEX BOLT
11 4 BN08S 1/2"-13NC STOVER LOCK NUT
12 1 BN16FCH 1"-14NF FLANGED CASTLE NUT GR. 8
13 - C90311 CUP & CONE BEARING SET - 4 BOLT HUB (2 BEARINGS)
14 - C91118A MULTI-LIP SEAL KIT FOR COULTER HUBS
15 - C90311SB CUP & CONE BEARING AND MULTI-LIP SEAL KIT

Parts 2 - 5 available only as kits 13 14 15 , not individually.

13 C90311 - BEARING KIT

IMPORTANT
5 Recommended Install Procedure.
Note: Bearings must be properly grease packed.
5 1. Torque the spindle nut to 100 ft/lbs (135 Nm) to
properly seat the bearings in the races. Always rotate
the hub while tightening.
2. Back spindle nut off until it is just loose.
3. Re-torque to 40 (55 Nm) ft/lbs while rotating the hub.
4. Adjust the nut to align the nearest slot with the hole in
the spindle. Hub must be able to rotated relatively freely.
Also it should be tight enough so that it cannot slide
back and forth on the spindle more than .005" (0.13mm).

5
14C91118A - MULTI-LIP 5
SEAL KIT FOR COULTERS
4
4
3
3
2 2

15 C90311SB - MULTI-LIP SEAL

& COIL-TECH BEARING KIT

03-2013 Salford Farm Machinery Ltd. Page 41

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

525-40’ 7.5” Coulter and Opener Layout

Coulter hubs point to

outsides of machine -
start in middle of machine

Openers under axle beams

mount using bolts and pull-up
plates - see opener installation
for details - 4 places

9" 5 1/2"
10 1/2" 5 1/2" 2" 3 1/2" 10" 4 1/2" 17 1/4" 9 3/4" 2 3/8" 2 5/8"
2 1/4" 3 3/8" 3 5/8" 2 1/8"

3" 1 1/2" 2 1/4" 12" 2 1/4" 1 3/8" 9 3/4"

13" 9 1/2" 2 1/2" 9 3/4" 2" 11 1/8" 3" 9 1/2"

2 1/4" 17 1/4" 3 3/8" 17 1/8" 16 7/8"

10 1/2" 5 1/2" 2" 9 3/4" 4 1/2" 2 1/4" 9 3/4" 9" 5 1/2" 2 3/8" 2 1/8"

3" 13" 9 1/2" 3 1/2" 12" 9 3/4" 2" 11 1/8" 9 3/4" 9 1/2"
1 1/4" 2 1/2" 2 1/4" 3 1/2" 24 1/2"

1 3/8"

525-40' - 64 COULTERS AND OPENERS ON 7.5" SPACING

Dimensions are in inches
Page 42 Salford Farm Machinery Ltd. 03-2013
 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Note: coulter positions shown are

centered on seed row. If offset is desired, All mounts
change mounting dimension to one side are short
or the other by the desired amount.

Coulter hubs point to

outsides of machine -
start in middle of machine
BN10L
5/8" NYLOCK NUT NC

T01679
BU1061 525-40' STUB BY HINGE
U-BOLT 5/8" x 6" x 5 1/2"

4 PLACES BY HINGES

1 3/8" 2"
3 1/2" 2 1/4" 2 1/2" 1 1/2"
9 1/2" 3" 9 3/4" 11 1/8" 9 3/4" 12" 3 1/2" 9 1/2" 13" 3"

2 1/4" 3 5/8" 2 3/8" 5 1/2" 9" 2 1/4" 4 1/2" 9 3/4" 2" 5 1/2" 10 1/2"
2 5/8" 3 3/8" 9 3/4" 17 1/4" 2 1/4"

24 1/2" 2" 9 3/4" 2 1/2" 9 1/2" 13"

9 1/2" 9 3/4" 11 7/8" 1 3/8" 2 1/4" 12" 2 1/4" 1 1/4" 3"

2 1/4" 2 3/8" 5 1/2" 2 1/4" 4 1/2" 3 1/2" 2" 10 1/2"

16 7/8" 17 1/8" 3 3/8" 9 3/4" 10" 5 1/2"
9" 17 1/4"

525-40' - 64 COULTERS AND OPENERS ON 7.5" SPACING

Dimensions are in inches
03-2013 Salford Farm Machinery Ltd. Page 43
Return to Contents 525 - 40ft Assembly and Parts Manual 2013

525-40’ 7.5” Opener Layout with 15” Fertilizer Openers

Openers under axle beams

mount using bolts and pull-up
plates - see opener installation
for details - 8 places

6 3/4" 1 1/2" 7 1/4" 15 3/4" 6" 21" 7 1/4" 7 3/8"

9 1/4" 7 1/4" 3/4" 6" 1 3/4" 1 1/4" 3/8" 5 7/8"

2 1/4" 17 1/4" 3 3/8" 17 1/8" 16 7/8"

10 1/2" 5 1/2" 2" 9 3/4" 4 1/2" 2 1/4" 9 3/4" 9" 5 1/2" 2 3/8" 2 1/8"

3" 13" 9 1/2" 3 1/2" 12" 9 3/4" 2" 11 1/8" 9 3/4" 9 1/2"
1 1/4" 2 1/2" 2 1/4" 3 1/2" 24 1/2"

1 3/8"

525-40' - 64 OPENERS ON 7.5" SPACING

32 MID-ROW FERTILIZER OPENERS ON 15" SPACING
Dimensions are in inches

Page 44 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

BN10L
5/8" NYLOCK NUT NC

T01679
BU1061 525-40' STUB BY HINGE
U-BOLT 5/8" x 6" x 5 1/2"

2 PLACES BY HINGES

7 3/8" 7 1/4" 21" 6" 15 3/4" 7 1/4" 1 1/2" 6 3/4"

5 7/8" 3/8" 1 1/4" 1 3/4" 6" 3/4" 7 1/4" 9 1/4"

24 1/2" 2" 9 3/4" 2 1/2" 9 1/2" 13"

9 1/2" 9 3/4" 11 7/8" 1 3/8" 2 1/4" 12" 2 1/4" 1 1/4" 3"

2 1/4" 2 3/8" 5 1/2" 2 1/4" 4 1/2" 3 1/2" 2" 10 1/2"

16 7/8" 17 1/8" 3 3/8" 9 3/4" 10" 5 1/2"
9" 17 1/4"

525-40' - 64 OPENERS ON 7.5" SPACING

32 MID-ROW FERTILIZER OPENERS ON 15" SPACING
Dimensions are in inches

03-2013 Salford Farm Machinery Ltd. Page 45

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

525-40’ 10” Opener Layout with 2” Offset Fertilizer Coulters

Coulter hubs point to

outsides of machine -
start in middle of machine

Openers under axle beams

mount using bolts and pull-up
plates - see opener installation
for details - 4 places

1"
12 1/2" 4 1/2" 5 1/2" 7" 14" 12 3/4" 4"
4 1/4" 6 1/8" 5 3/8"

2 1/4" 2 3/4" 2 1/2" 2 3/4" 10 3/4" 13 7/8"

75"
8 1/4" 4 3/4" 14 1/4" 16" 2 1/4" 15 1/4"
2 7/8"
2 1/4" 4 1/8" 23"
14 1/2" 3 1/4" 14 3/4" 14 1/2" 2 1/4" 14 3/4" 3/4" 6" 3 3/8"

4 1/4" 6 1/4" 6 3/4" 6" 4 1/2" 12 1/4" 14" 13 1/4"

4 3/4" 15 7/8"
5"
9"

525-40' - 48 COULTERS AND OPENERS ON 10" SPACING

WITH FERTILIZER COULTERS OFFSET 2"
Dimensions are in inches

Page 46 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

All mounts
are short

Coulter hubs point to

outsides of machine -
start in middle of machine
BN10L
5/8" NYLOCK NUT NC

T01679
BU1061 525-40' STUB BY HINGE
U-BOLT 5/8" x 6" x 5 1/2"

4 PLACES BY HINGES

3" 11" 2 3/4"

15 1/4" 13 7/8" 16" 14 1/4" 2 1/2" 4" 4 3/4" 8 1/4" 2 1/4"

12 3/4" 24 1/4" 4 1/4" 1 1/2"

7 5/8"
5 1/2" 2 1/4" 4" 1 3/4" 4 1/4" 12 3/4" 12 1/2"

12 1/4" 6 3/4" 6 1/4"

13 1/4" 15 7/8" 14 3/4" 8 5/8" 4 3/4" 4 1/2" 4 3/4" 4 1/4"

23" 6" 4 1/8" 14 3/4" 22 1/4" 5" 3 1/4"

3 1/8"
3 1/2" 1/4" 2 1/4" 3 1/2" 14 1/2"

525-40' - 48 COULTERS AND OPENERS ON 10" SPACING

WITH FERTILIZER COULTERS OFFSET 2"
Dimensions are in inches

03-2013 Salford Farm Machinery Ltd. Page 47

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

525-40’ 10” Opener Layout with 2” Offset Fertilizer Openers

Openers under axle beams

mount using bolts and pull-up
plates - see opener installation
for details - 8 places

11" 8 1/4"
2 1/4" 8 1/4" 4 3/4" 4" 2 1/2" 14 1/4" 4 3/8"
5 3/4" 3" 6 7/8"

12 1/2" 1 1/4" 15" 7" 12 1/2" 4 1/4" 6 1/2" 1" 6 1/8" 4" 2 1/4" 5 3/8"
2 1/4" 14 3/4" 4 1/8" 25 3/4"
14 1/2" 14 3/4" 14 1/2" 2 1/4" 3/4" 6" 3 3/8"

4 1/4" 6 1/4" 6 3/4" 6" 4 1/2" 12 1/4" 14" 15 7/8" 13 1/4"

3 1/4" 4 3/4" 5"
9"

525-40' - 48 OPENERS ON 10" SPACING

WITH FERITLIZER OPENERS OFFSET 2"
Dimensions are in inches

Page 48 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

BN10L
5/8" NYLOCK NUT NC

T01679
525-40' STUB BY HINGE
BU1061
U-BOLT 5/8" x 6" x 5 1/2"

4 PLACES BY HINGES

11"
2 3/4"
15 1/4" 13 7/8" 16" 14 1/4" 2 1/2" 4" 4 3/4" 8 1/4" 2 1/4"
3"

2 1/4" 6 1/8" 12 3/4" 4 1/4" 1 1/4"

5 1/2" 4" 1" 4 1/4" 12 1/2" 12 3/4" 12 1/2"

12 1/4" 6 3/4" 6 1/4"
13 1/4" 16 1/4" 14 3/4" 9" 4 3/4" 4 1/2" 4 3/4" 4 1/4"

3" 6" 1/4" 2 1/4" 14 1/2" 3 1/2" 3 1/2" 14 1/2"

3 1/8"
22 1/2" 4 1/8" 14 3/4" 5"

525-40' - 48 OPENERS ON 10" SPACING

WITH FERITLIZER OPENERS OFFSET 2"
Dimensions are in inches

03-2013 Salford Farm Machinery Ltd. Page 49

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

Air Distribution 6 Tower Opener Air Distribution Layout

T00664
AIR HOSE CHAIN
WITH CLIPS

T01730
REAR AXLE
HOSE HOLDER

BU1060 T00673
U-BOLT 5/8" TBH AIR CART
x 6" x 7 1/2" TONGUE HOSE GUIDE

BN10L Mount hose cradles on

5/8" NYLOCK
NUT NC tongue for TBT air carts

BU1046
U-BOLT 5/8" x
4" x 7 1/2" LG.

T00342
AIR SEEDER
FRAME 2 1/2"
BN10L HOSE GUIDE
5/8" NYLOCK
NUT NC Mount hose holder
between openers

Outlets Outlets Outlets

10-7.5" 11-7.5" 11-7.5"
8-10" 8-10" 8-10"
6-12" 7-12" 7-12"

Channels at these
locations mounted
directly to toolbars using
bolts and pull-up plates
525-40' 6 TOWER OPENER AIR DISTRIBUTION - TBT CARTS
Page 50 Salford Farm Machinery Ltd. 03-2013
 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Line up hose holder with opener in front

of hinge and route 1" air hose through it Top of tower must not be more
than 18" (46cm) above tube or
it will collide with main frame
T01729 BN10L
525 1" AIR HOSE 5/8" NYLOCK
HOLDER BY HINGE NUT NC

BU1061
U-BOLT 5/8" 18"MAX
x 6" x 5 1/2"

T01731
525-40' AIR HOSE
HOLDER ON EXTENSION

Channel at this location

mounted to extension

Outlets Outlets Outlets

11-7.5" 11-7.5" 10-7.5"
8-10" 8-10" 8-10"
7-12" 7-12" 6-12"

T00664
AIR HOSE CHAIN
WITH CLIPS

T00673
TBH AIR CART
TONGUE HOSE GUIDE

Mount hose cradles on

tow hitch for TBH air carts

525-40' 6 TOWER OPENER AIR DISTRIBUTION - TBH AIR CARTS

03-2013 Salford Farm Machinery Ltd. Page 51
Return to Contents 525 - 40ft Assembly and Parts Manual 2013

6 Tower Fertilizer Air Distribution Layout

Outlets Outlets Outlets

10-7.5" 11-7.5" 11-7.5"
8-10" 8-10" 8-10"
6-12" 7-12" 7-12"
5-15" 5-15" 6-15"
4-20" 4-20" 4-20"

BU1046
U-BOLT 5/8" x
T01490 4" x 7 1/2" LG.
SINGLE RING
HOSE HOLDER

BN10L
5/8" NYLOCK
NUT NC

525-40' 6 TOWER FERTILIZER AIR DISTRIBUTION - TBT CARTS

Page 52 Salford Farm Machinery Ltd. 03-2013
 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Outlets Outlets Outlets

11-7.5" 11-7.5" 10-7.5"
8-10" 8-10" 8-10"
7-12" 7-12" 6-12"
6-15" 5-15" 5-15"
4-20" 4-20" 4-20"

BU1046
T01489 U-BOLT 5/8" x
DOUBLE RING 4" x 7 1/2" LG.
HOSE HOLDER

BN10L
5/8" NYLOCK
NUT NC

525-40' 6 TOWER FERTILIZER AIR DISTRIBUTION - TBH AIR CARTS

03-2013 Salford Farm Machinery Ltd. Page 53
Return to Contents 525 - 40ft Assembly and Parts Manual 2013

8 Tower Opener Air Distribution Layout

T00664
AIR HOSE CHAIN
WITH CLIPS

A1-22"(56cm)
A2-18 1/2" (47cm)
A3-26 1/2"(67cm)
T00673
TBH AIR CART
TONGUE HOSE GUIDE

Mount hose cradles on

tongue for TBT air carts

T00323
A1, A2, A3

Outlets Outlets
8-7.5" 8-7.5"
6-10"

Outlets
C Outlets
B 6-10"
5-12" 5-12"

8-7.5" 8-7.5"
6-10" 6-10"
5-12" 5-12"

17"
43cm

17"
43cm
17"
43cm

A1 A1 A2
17"
43cm
D

A3

525-40' 8 TOWER OPENER AIR DISTRIBUTION - TBT CARTS

Page 54 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

T01730
REAR AXLE
HOSE HOLDER BU1046
U-BOLT 5/8" x
BU1046 4" x 7 1/2" LG.
U-BOLT 5/8" x
4" x 7 1/2" LG.

BU1060 BN10L BN10L

U-BOLT 5/8" 5/8" NYLOCK 5/8" NYLOCK
x 6" x 7 1/2" NUT NC NUT NC
T01490
BN10L SINGLE
T01489 RING HOSE
5/8" NYLOCK DOUBLE
NUT NC HOLDER
RING HOSE
HOLDER
D - 2 PLACES C - 4 PLACES
B - 4 PLACES

C
Outlets Outlets
8-7.5"
6-10"
8-7.5"
6-10"
B
5-12" 5-12" Outlets Outlets
8-7.5" 8-7.5"
17" 6-10" 6-10"
43cm 5-12" 5-12"

17"
43cm

17"
43cm
17"
43cm

D A2 A1 A1
T00664
AIR HOSE CHAIN
WITH CLIPS

A3
T00673
TBH AIR CART
Mount hose cradles on TONGUE HOSE GUIDE
tow hitch for TBH air carts

525-40' 8 TOWER OPENER AIR DISTRIBUTION - TBH AIR CARTS

03-2013 Salford Farm Machinery Ltd. Page 55

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

8 Tower Fertilizer Air Distribution Layout

A1-19"(48cm)
A2-20 1/2" (52cm)
A3-24 1/2"(62cm) A4-21"(53cm)

T00323
T00323 A4
A1, A2, A3
D

Route this hose

under axle beam

Outlets Outlets Outlets Outlets

8-7.5" 8-7.5" 8-7.5" 8-7.5"
6-10" 6-10" 6-10" 6-10"
5-12" 5-12" 5-12" 5-12"
4-15" 4-15" 4-15" 4-15"
A1

23"
58cm 23"
23"
58cm
58cm

20 1/2"
52cm

C B A3

A4 A2
Route these hoses through
triangle on top of axle beam

525-40' 8 TOWER FERTILIZER AIR DISTRIBUTION - TBT CARTS

Page 56 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

BU1046
BU1046 U-BOLT 5/8" x
U-BOLT 5/8" x 4" x 7 1/2" LG.
4" x 7 1/2" LG.

BN10L BN10L
5/8" NYLOCK 5/8" NYLOCK
NUT NC NUT NC
T01490
SINGLE
T01489 RING HOSE
DOUBLE HOLDER
RING HOSE
HOLDER
T01731
525-40' AIR HOSE
HOLDER ON EXTENSION B - 2 PLACES C - 4 PLACES
D - 2 PLACES

Route this hose

under axle beam
Outlets Outlets Outlets Outlets
8-7.5" 8-7.5" 8-7.5" 8-7.5"
6-10" 6-10" 6-10" 6-10"
5-12" 5-12" 5-12" 5-12"
4-15" 4-15" 4-15" 4-15"

A1

D 23"
58cm 23"
20 1/2"
23" 58cm
52cm
58cm

B C

A2 A4

Route these hoses through

triangle on top of axle beam

A3

525-40' 8 TOWER FERTILIZER AIR DISTRIBUTION - TBH AIR CARTS

03-2013 Salford Farm Machinery Ltd. Page 57

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

Air Distribution Parts

24 Machines using a WSMB

MODULE 27 must use
5-23
26 instead of 2 x 30

30
39 33 26

29

25

38
27

3
28

38
2

38
40
37 1 36
34 1
35
Mount can be flipped 37
to install air tower
higher if desired

Use plugs in secondary heads when seeding 33

with every other opener. Plugs must be installed 32
31 symmetrically - don't block off lines that are
beside each other on the secondary head.

For 1" lines For 1 1/4" lines

Page 58 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Air Distribution Parts

ITEM PART NO. DESCRIPTION
1 T00438 SECONDARY RISER MOUNT
2 T00031 AIR SEEDER RISER
3 BUR052545 5/16 x 2 1/2 x 4 1/2" ROUND U-BOLT
4 BN05L 5/16" LOCK NUT
5 T01335 SECONDARY HEAD - 5 OUTLET - 1"
6 T01346 SECONDARY HEAD - 6 OUTLET - 1"
7 T01347 SECONDARY HEAD - 7 OUTLET - 1"
8 T00440 SECONDARY HEAD - 8 OUTLET - 1"
9 T00441 SECONDARY HEAD - 9 OUTLET - 1"
10 T00398 SECONDARY HEAD - 10 OUTLET - 1"
11 T00435 SECONDARY HEAD - 11 OUTLET - 1"
12 T00032 SECONDARY HEAD - 12 OUTLET - 1"
13 T00333 SECONDARY HEAD - 13 OUTLET - 1"
14 T00640 SECONDARY HEAD - 14 OUTLET - 1"
15 T00641 SECONDARY HEAD - 15 OUTLET - 1"
16 T01177 SECONDARY HEAD - 5 OUTLET - 1 1/4"
17 T01178 SECONDARY HEAD - 6 OUTLET - 1 1/4"
18 T01351 SECONDARY HEAD - 7 OUTLET - 1 1/4"
19 T01168 SECONDARY HEAD - 8 OUTLET - 1 1/4"
20 T01169 SECONDARY HEAD - 9 OUTLET - 1 1/4"
21 T01348 SECONDARY HEAD - 10 OUTLET - 1 1/4"
22 T01349 SECONDARY HEAD - 11 OUTLET - 1 1/4"
23 T01350 SECONDARY HEAD - 12 OUTLET - 1 1/4"
24 T00036 SECONDARY HEAD CAP - RUBBER
25 BU1061 U-BOLT 5/8" x 6" x 5 1/2"
26 L01122 1/4" x 5" x 9" WSMB MOUNTING PLATE
27 TDJ467981100S1 18 ROW WSMB MODULE
28 B0415 1/4" x 1 1/2" UNC HEX BOLT GR.5 PLATED
29 BN04L 1/4" LOCK NUT
30 L00660 3/8" x 1" x 4" BOLTING PLATE
31 CSP-23 1" TAPERED PLUG
32 GVC125-24 VINYL CAP 1 1/4" DIA. x 1 1/2" LG.
33 T00022 1" HOSE CLAMP ( #16 )
34 T00023 2 1/2" HOSE CLAMP (#48)
35 T00323 AIR SEEDER MAIN TOWER BASE
36 L00664 1/2" x 2" x 4" BOLTING PLATE
37 B1060 5/8"NC x 6" LG. HEX BOLT
38 BN10L 5/8" NYLOCK NUT NC
39 T00019-S 1" SPIRAL HOSE
40 L01075 5/8" x 2" x 9" BOLTING PLATE - 2 HOLE
Machines using a WSMB MODULE 27 must use 26 instead of 2 x 30

03-2013 Salford Farm Machinery Ltd. Page 59

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

Tow Hitch
Rigid Tow Hitch Assembly
For air carts with pivoting tongues
Connect tow hitch wiring harness to 4 10 9 8
6 pin plug on main wiring harness

19

7 11 12

3
15 14 13

7 pin plug (part

of light harness)

17
16

Monitor harness
plug (if equipped)

Page 60 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Rigid Tow Hitch Assembly

ITEM QTY PART NO. DESCRIPTION
1 1 T01589 2 1/2" TURNBUCKLE - 84" LG. TUBE
2 1 T01637 525 TOW HITCH
3 1 T01658 AIR DRILL TOW HITCH CLEVIS
4 1 C10716 2 1/2" TURNBUCKLE LOCK
5 2 T00673 TBH AIR CART TONGUE HOSE GUIDE
6 2 T00664 AIR HOSE CHAIN WITH CLIPS - 34 1/2" LG.
7 2 GP2000612B06 1 1/4" x 6 1/2" LG. PIN - 1 HOLE
8 2 GPH20006A06 1 1/4" x 6" HARDENED PIN - 2 HOLES
9 4 BF20S 1 1/4" SAE WASHER
10 4 BSC0520 5/16" x 2" COTTER PIN
11 2 B0625 3/8" NC x 2 1/2" LG. HEX BOLT GR. 5
12 2 BN06L 3/8"-16NC LOCK NUT
13 2 B1270 3/4 X 7" HEX BOLT GR.5
14 4 BF12HS 3/4" HARD STRUCTURAL WASHER
15 2 BN12L 3/4" NC NYLOCK NUT
16 6 B0410 1/4" x 1" NC SS BOLT
17 6 BN04L 1/4" LOCK NUT
18 2 BR4100-150 1 1/2" RETAINING SNAP RING
19 1 T00771-1 AIR SEEDER ADD-ON HARNESS FOR TBH TANK

Mount 1/2" coupler for case drain with snap rings

18

Insert ends of 3/4" fan hoses through

plate before attaching female couplers
(see following pages for hydraulic details)

03-2013 Salford Farm Machinery Ltd. Page 61

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

Floating Tow Hitch Assembly

For air carts with fixed clevis on frame
Connect tow hitch wiring harness to
6 pin plug on main wiring harness 7

Use brace only when air cart is

disconnected from air drill. Remove
brace for normal field operation.

16
4

6 8 9

7 pin plug (part

12 11 10
of light harness)

14
13

Monitor harness
plug (if equipped)

Page 62 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Floating Tow Hitch Assembly

ITEM QTY PART NO. DESCRIPTION
1 1 T01589 2 1/2" TURNBUCKLE - 84" LG. TUBE
2 1 T01658 AIR DRILL TOW HITCH CLEVIS
3 1 T01846 525-30'-50' FLOATING TOW HITCH
4 3 T00673 TBH AIR CART TONGUE HOSE GUIDE
5 3 T00664 AIR HOSE CHAIN WITH CLIPS - 34 1/2" LG.
6 2 GP2000612B06 1 1/4" x 6 1/2" LG. PIN - 1 HOLE
7 2 GP20007C04 1 1/4" x 7" ZINC PLATED PIN
8 2 B0625 3/8" NC x 2 1/2" LG. HEX BOLT GR. 5
9 2 BN06L 3/8"-16NC LOCK NUT
10 2 B1270 3/4 X 7" HEX BOLT GR.5
11 4 BF12HS 3/4" HARD STRUCTURAL WASHER
12 2 BN12L 3/4" NC NYLOCK NUT
13 6 B0410 1/4" x 1" NC SS BOLT
14 6 BN04L 1/4" LOCK NUT
15 2 BR4100-150 1 1/2" RETAINING SNAP RING
16 1 T00771-1 AIR SEEDER ADD-ON HARNESS FOR TBH TANK

Mount 1/2" coupler for case drain with snap rings

15

Insert ends of 3/4" fan hoses through

plate before attaching female couplers
(see following pages for hydraulic details)

03-2013 Salford Farm Machinery Ltd. Page 63

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

Tow Hitch Hydraulics

B C D

60 61

A C D

Page 64 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Tow Hitch Hydraulics

HARDWARE
ITEM QTY PART NO. DESCRIPTION
A 2 H6601 3/4" NPT 3/4" PIONEER FEMALE COUPLER
B 2 H8010-5 3/4" NPT PIONEER MALE TIP TO FIT 1/2" REMOTE
C 2 H42504P 1/2" NPT PIONEER FEMALE COUPLER
D 2 H52054 #5205-4C 1/2" PIONEER DUST PLUG
* E 1 H5253050TH 525-30'/50' HOSE KIT - RIGID TOW HITCH HYDRAULICS
** F 1 H5253050FTH 525-30'/50' HOSE KIT - FLOATING TOW HITCH HYDRAULICS

HOSES
RIGID HITCH FLOATING HITCH
LABEL QTY SIZE FROM TO
LENGTH (in) LENGTH(in)
60 2 3/4" 36' 42' TRACTOR EXTEND MANIFOLD 'BASE'
61 1 1/2" 36' 42' TRACTOR RETRACT BALL VALVE

* HOSE KIT IS FOR RIGID TOW HITCH

**HOSE KIT IS FOR FLOATING TOW HITCH

03-2013 Salford Farm Machinery Ltd. Page 65

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

Hydraulics & Electrical

Depth Control and Work Switch Installation

6 5 11
17

13

6 21

20 19
22 23 8

12

8 23 22
Insert washer
between mounting
plate and
activator. Do not
overtighten bolt.

18

14

16

Adjust work switch activation

15
point by moving snap hook to
different chain links as desired.

8 23 22

Install work switch on RH main front axle.

Page 66 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Depth Control and Work Switch Installation

ITEM QTY PART NO. DESCRIPTION
1 1 FL02065 525-60'/70' POPPET VALVE BRACKET
2 1 C10907 50' RTS DEPTH CTRL ROD - 42" WITH CLEVIS
3 1 C1008 DEPTH CONTROL DISC ASSEMBLY
4 1 HPMSC10 STROKE CONTROL VALVE
5 4 B0620 3/8" NC x 2" LG. HEX BOLT GR. 5
6 6 BN06L 3/8"-16NC LOCK NUT
7 1 B0820 1/2" NC x 2" LG. HEX BOLT GR. 5
8 4 BN08L 1/2" NYLOCK NUT NC
9 2 B0525 5/16 x 2 1/2" BOLT
10 2 BN05L 5/16" LOCK NUT
11 1 T01671 525-40' WORK SWITCH MOUNT
12 1 T00721 ROLLER ARM LIMIT SWITCH (LS45M42B11)
13 1 0708896 LIMIT SWITCH NUT
14 2 GSE0173 OPENER INSIDE SPRING
15 1 GCL08 18" LENGTH OF 1/2" PASSING LINK CHAIN
16 1 GCSH06 3/8" SPRING HOOK
17 1 FL01946 525 WORK SWITCH MOUNTING PLATE
18 1 FL01947 525 WORK SWITCH ACTUATOR
19 4 B0217 #10-24 x 1 3/4" MACHINE SCREW
20 4 BN02 #10-24 HEX NUT
21 2 B0615 3/8" NC x 1 1/2" LG. HEX BOLT GR.5
22 3 B0815 1/2" NC x 1 1/2" LG. HEX BOLT GR. 5
23 3 BF08HS 1/2" HARD STRUCTURAL FLAT WASHER

5 6

9 10

4
1

3
Install depth control
on LH main front axle.

7 8

03-2013 Salford Farm Machinery Ltd. Page 67

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

Hydraulic Components Installation

11
8
9

10

19

6
18
DETAIL B

17
6

16

12

DETAIL D

6 15 5 3 13

6
15

5
4 14
6 2 12

5
6

12

DETAIL C

DETAIL A

Page 68 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Hydraulic Components Installation

ITEM QTY PART NO. DESCRIPTION
1 1 L01411 BALL VALVE MOUNTING PLATE
2 1 HV1136 1/2" 2-WAY BALL VALVE
3 2 BU1046 U-BOLT 5/8" x 4" x 7 1/2" LG.
4 2 BUR061222 U-CLAMP ROUND 3/8 X 1 1/4 X 2 1/4 (42014)
5 16 BN10L 5/8" NYLOCK NUT NC
6 58 BN06L 3/8"-16NC LOCK NUT
7 1 H00012 3 SECTION WING FOLDING MANIFOLD
8 2 B0625 3/8" NC x 2 1/2" LG. HEX BOLT GR. 5
9 1 H930588 -08 ORB TO -08 NPT FEMALE SWIVEL STRAIGHT ADAPTER
10 1 H951588 -08 ORB MALE TO 1/2" FEMALE NPT SWIVEL ELBOW
11 1 H940588 -08 NPT MALE TO -08 NPT FEMALE SWIVEL ELBOW
12 6 T01496 SINGLE CLAMP HYDRAULIC HOSE HOLDER
13 1 T01498 525 PRIMARY WING HYD. HOSE HOLDER
14 5 BU1061 U-BOLT 5/8" x 6" x 5 1/2"
15 28 P0160A HOSE CLAMP 3"
16 24 P0160B HOSE CLAMP 4"
17 1 BU1062 U-BOLT 5/8" x 6" x 4 1/2"
18 4 H930586 -08M ORB TO -06F NPT SWIVEL
19 4 H951586 -08 ORB TO -06 NPT SWIVEL ELBOW

Use 3" clamp for 1 or 2 hoses

6

15 Use 4" clamp for 3 or 4 hoses

16

03-2013 Salford Farm Machinery Ltd. Page 69

 Page 70
E
4
Return to Contents

1/2" hose from Sb Sa

rear feed tee R
F
Sa
J
R 3/8" hose from
axle return tee
Q

2 K Q

In cylinder 11
barrel end port H In cylinder
G H 1 5 barrel end port
Sb 10
Rear counterbalance valve detail R 3/8" hose from 1/2" hose from
axle return tee HSR4512BBJ rod end
H
3 Front counterbalance valve detail

Use plugs and caps to seal

hoses when disconnecting
at unions for shipping
B B T U V
C H 6b 6a 10 10 6a 6b H C

Salford Farm Machinery Ltd.

525 - 40ft Assembly and Parts Manual 2013

Axle Lift Hydraulics 

5 5
T M 9 7
7 U 8a L 8a
V P
P
9

8b N 4 N
11 11 8b

H H
D H H D
A
A

03-2013
 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Axle Lift Hydraulics 

HARDWARE
ITEM QTY PART NO. DESCRIPTION
A 2 HSR4512BBJ4 1/2" x 12" BALL JOINT REPHASING CYLINDER
B 2 HSR4012BBJ4" x 12" BALL JOINT REPHASING CYLINDER
C 2 HSR3512 3 1/2" BORE x 12" STROKE REPHASING CYLINDER
D 2 HSR3212 3 1/4" BORE x 12" STROKE REPHASING CYLINDER
E 2 H80104P 1/2" NPT PIONEER MALE TIP
1 HG-PT22E22R21R PAIR OF RED EXTEND / RED-GREY RETRACT PLASTIC
F HOSE GRIPS
G 1 HPMSC10 STROKE CONTROL VALVE
H 18 H951588 -08 ORB TO 1/2" NPT FEMALE SWIVEL ELBOW
J 4 H930588 -08 ORB TO 1/2" NPT FEMALE SWIVEL
K 4 H940588 -08 NPT MALE TO -08 NPT FEMALE SWIVEL ELBOW
L 1 H910088 1/2" NPT TO 1/2" NPT MALE NIPPLE
M 1 HT08SC 1/2" NPT ALL FEMALE SWIVEL CROSS
N 2 H958888 -08 NPT ALL FEMALE SWIVEL TEE
P 2 H956666 3/8" NPT ALL FEMALE SWIVEL TEE
Q 4 H6407-08-08 -08 ORB TO -08 ORB MALE ADJUSTABLE STRAIGHT
R 9 H89008 -08 ORB PLUG
S 4 HVSF500921 COUNTERBALANCE MANIFOLD AND VALVE ASSEMBLY
Sa - HVSF500121 SF500121 COUNTERBALANCE VALVE MANIFOLD
Sb - HVCBCL-LJN SUN CBCL-LJN COUNTERBALANCE VALVE
T 4 H1405-08-08 1/2" NPT SWIVEL UNION
U 4 H5406-P-08 1/2" NPT PIPE PLUG
V 4 H5406-C-08 1/2" NPT PIPE CAP

HOSES
LENGTH
LABEL QTY SIZE FROM TO
(in)
1 1 1/2" 25' TRACTOR REAR FEED TEE
2 1 1/2" 30'8" TRACTOR STROKE CONTROL VALVE
3 1 1/2" 9'6" STROKE CONTROL VALVE RETURN CROSS/TEE
4 2 1/2" 9'6" REAR FEED TEE HSR4512 BARRELS
5 2 1/2" 14'7" HSR4512 RODS HSR4012 BARRELS
6a 2 1/2" 10'5" HSR4012 RODS UNION
6b 2 1/2" 11'1" UNION HSR3512 BARRELS
7 2 1/2" 13'2" HSR3512 RODS HSR3212 BARRELS
8a 2 1/2" 19'2" HSR3212 RODS UNION
8b 2 1/2" 9'9" UNION RETURN CROSS/TEE
9 2 3/8" 4'4" RETURN CROSS/TEE COUNTERBALANCE TEE
10 2 3/8" 8'8" COUNTERBALANCE TEE FRONT COUNTERBALANCES
11 2 3/8" 4'11" COUNTERBALANCE TEE REAR COUNTERBALANCES

CHARGING THE CIRCUIT

Connect only the Barrel end of the cylinders until the circuit has been charged.

1. Be sure that all cylinders can extend completely without striking anything. Prop with blocks
if necessary.
2. Connect Tractor.
3. Extend cylinders and hold lever for 2-3 minutes. This will purge the air from the circuit.
(The lift cylinders have a port that allows oil to pass when completely extended.)
4. The circuit is now free from air. Install rod end pins.

Whenever air could have entered the cylinders, repeat above steps to purge circuit.

Test wing fold and adjust hose droop at wings if necessary.

03-2013 Salford Farm Machinery Ltd. Page 71

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

Wing Fold Hydraulics 

D
A

46
45
42
41

F
E

43

44
43
40
C
B

45

46

Page 72 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Wing Fold Hydraulics 

HARDWARE
ITEM QTY PART NO. DESCRIPTION
A 4 HS4536 4 1/2" BORE x 36" STROKE HYD. CYLINDER
B 2 H80104P 1/2" NPT PIONEER MALE TIP
HG-PT24E24R21R PAIR OF GREEN EXTEND / GREEN-GREY RETRACT
C 1 PLASTIC HOSE GRIPS
D 8 H951586 -08 ORB MALE TO 3/8" NPT FEMALE SWIVEL ELBOW
E 1 HV1136 1/2" 2-WAY BALL VALVE
F 2 H930588 -08 ORB TO 1/2" NPT FEMALE SWIVEL

HOSES
LENGTH
LABEL QTY SIZE FROM TO
(in)
40 1 1/2" 24'5" TRACTOR EXTEND MANIFOLD 'BASE'
41 1 1/2" 13' TRACTOR RETRACT BALL VALVE
42 1 1/2" 11' BALL VALVE MANIFOLD 'ROD'
43 2 3/8" 3'2" MANIFOLD 'FLB' & 'FRB' FRONT BARREL
44 2 3/8" 6'8" MANIFOLD 'RLB' & 'RRB' REAR BARREL
45 2 3/8" 6'8" MANIFOLD 'FLR' & 'FRR' FRONT ROD
46 2 3/8" 8'2" MANIFOLD 'RLR' & 'RRR' REAR ROD

CHARGING WING FOLD CYLINDERS

IMPORTANT: Do not connect the cylinder rods until system has been charged with oil.
1. Prop up the cylinder with a block of wood so the rod can extend without striking anything.
2. Hitch to tractor and connect hoses. (note: check to see that all the cylinders move in the
same direction. If not, then switch the rod and barrel hoses of the cylinder(s) moving
backward.)
3. Extend cylinders completely. Hold lever for 30 seconds as air exits the cylinder.
4. Retract cylinders completely. Hold lever for 30 seconds.
5. Repeat three times.
6. Install cylinder pins. Be sure washers are installed correctly (see cylinder page).
7. When folding for the first time, or when new hardware is installed,
CAUTION check that cylinders and fittings do not collide with the wing frame when
fully folded. If so, use an alternate plug in the cylinder, or simply rotate
cylinder 180 degrees.

Air in the wing cylinders will cause wings to fall to the ground!!!
DANGER Whenever air could have entered the cylinders, repeat the process
above to purge circuit.

Never work on a lift system with the wings folded!!! ALWAYS UNFOLD WINGS before
working on hydraulics!!

03-2013 Salford Farm Machinery Ltd. Page 73

 Page 74
5
6
8 10
12
Return to Contents

11
7

13
7

14
4

9
8 3

DETAIL C DETAIL B
7 pin plug
to tractor
2

Tie strap wire to

hoses
Connect bare wire ends to top

Salford Farm Machinery Ltd.

two terminals inside work switch
1 plug per light. Plug for left light
is marked with a yellow 'LEFT' Route wires along axle hoses
sticker. See next page for light and then through plates and
Lights & SMV Install
525 - 40ft Assembly and Parts Manual 2013

mounting location details work switch mounting bracket

4 pin plug to
light harness

6 pin plug to tow hitch

harness (optional) 16
See tow hitch installation for
mounting female receptacle
9

15
Route wires
along hoses and
11 tie strap in place

03-2013
DETAIL A
 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Lights & SMV Install

ITEM QTY PART NO. DESCRIPTION
a 1 1 GL767762 SALFORD WESBAR LIGHT KIT
b 2 1 T01710 525 AIR DRILL WIRING HARNESS
3 1 C1011 SMV MOUNTING BRACKET
4 1 GAP103NS SMV SIGN
5 2 BN06L 3/8"-16NC LOCK NUT
6 2 B0610 3/8 X 1" PLATED BOLT GR.5
7 3 BU1061 U-BOLT 5/8" x 6" x 5 1/2"
8 6 BN10L 5/8" NYLOCK NUT NC
9 8 B0412 1/4"NC x 1 1/4" HEX BOLT
10 4 BU0410 1/4 x 1" x 1 1/2" U-BOLT
11 16 BN04L 1/4" LOCK NUT
12 2 A60054 LIGHT BRACKET (LONG)
13 2 L00425 OUTSIDE LIGHT MOUNTING PLATE
a 14 2 GL767762-AA ORANGE LIGHT
a 15 2 GL767762-R RED LIGHT
c 16 1 T00771-1 AIR SEEDER ADD-ON HARNESS FOR TBH TANK
a - light kit includes wiring harness and individual lights
b - replaces main harness from light kit
c - included in optional rear tow hitch kit

Make sure light clears

wing frame and air hose 21 1/2"
holders etc. when folding

Actual position of light

bracket may need to
change depending on
locations of openers

Orange lights should be

visible from both front and rear

03-2013 Salford Farm Machinery Ltd. Page 75

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

Markers
Optional Marker Installation
2 3 5
5 4
Position marker
mounts between
5 7 4 coulters or openers

5 3

14

11
Position sequence
valve between coulters
or openers on front bar

13 12

10 5
Sequence valve as
shown from front

Page 76 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Optional Marker Installation

ITEM QTY PART NO. DESCRIPTION
1 1 T00150 SET OF HAUKAAS 246 SIDE ARM MARKERS
2 4 FL01998 525 FRONT MARKER MOUNT
3 6 BU1061 U-BOLT 5/8" x 6" x 5 1/2"
4 6 BU1030 U-BOLT 5/8" x 3" x 4 1/2"
5 26 BN10L 5/8" NYLOCK NUT NC
6 2 FL01999 525-30' REAR MARKER MOUNT
7 4 BF10HS 5/8" HARD STRUCTURAL FLAT WASHER
8 2 H80104P 1/2" NPT MALE PIONEER COUPLER
1 HG-PT20E20R21R PAIR OF BLUE EXTEND / BLUE-GREY RETRACT
9 PLASTIC HOSE GRIPS
10 1 BU1046 U-BOLT 5/8" x 4" x 7 1/2" LG.
11 1 FL02315 525 MARKER SEQUENCE VALVE MOUNT
12 2 B0610 3/8" NC x 1" LG. HEX BOLT GR.5
13 2 BL06 3/8" LOCKWASHER
14 1 T00353 MARKER SEQUENCE VALVE #4129-055
15 12 P0160B HOSE CLAMP 4"

HOSES
LABEL QTY LENGTH FROM TO
M1 2 21' TRACTOR SEQUENCE VALVE
M2 4 25' SEQUENCE VALVE MARKER

Refer to "HAUKAAS FIELD MARKERS"

Owners manual for fittings details.
REMOVE THIS
RESTRICTOR 8

9
R R

C C
M1
'R' to marker cylinder Rod end
'C' to marker cylinder Base end

Tie wrap marker hoses

to hoses on tongue Replace existing 3" clamps
15 with 4" clamps supplied

M2 M2

03-2013 Salford Farm Machinery Ltd. Page 77

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

Decals
Decal Installation Layout

1
18

1
1
17

19

10

10
1
11

8
9

1
9

2
11
Place opener downpressure setting decal on endmost

8
openers of main frame and secondary wings.

14

1
10

10
1

1
13

Page 78 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Decal Installation Layout

7

3
3
6

These 2 4
decals on LH
caster only 5

12
16

3 3 10

16

10

3
15

12 3

3 3

03-2013 Salford Farm Machinery Ltd. Page 79

Return to Contents 525 - 40ft Assembly and Parts Manual 2013

Decal Parts List

ITEM QTY PART NO. DESCRIPTION
1 9 GD100 SALFORD DECAL 4" x 16"
2 2 GD102 WWW. SALFORD DECAL
3 30 GD10840 GREASE EVERY 40 HOURS DECAL
4 1 GD110 WARNING DON'T LIFT DECAL
5 1 GD112 ATTENTION LUBRICATE DECAL
6 2 GD144 WING LOCK DECAL
7 1 GD109 DEPTH CONTROL DECAL
8 2 GD525 MODEL 525 DECAL
9 2 GDSW2 USE PROPER TOOLS AND READ MANUAL DECAL
10 4 GDSW200 WARNING STICKER, OVERHEAD CRUSHING HAZARD
11 2 GDT3 DANGER STICKER FOR CRUSHING HAZARD
12 4 GD108 HIDDEN GREASE FITTINGS DECAL
13 4 GD190R OPENER DECAL (RH)
14 4 GD190L OPENER DECAL (LH)
15 4 GD193 11L x 15 TIRE DECAL
16 4 GD194 8 LUG HUB DECAL
17 1 GDSW700 WARNING STICKER, HIGH PRESSURE FLUID HAZARD
18 1 GDSW4 SAFE OPERATION LIST DECAL
19 1 GD210 HOSE IDENTIFICATION DECAL

GD100 1 GD102 2

GD10840 3

GD110 4
GD112 5

GD144 6 GD109 7

Page 80 Salford Farm Machinery Ltd. 03-2013

 525 - 40ft Assembly and Parts Manual 2013 Return to Contents

Decal Legend

GDSW2 9

GD525 8
GDSW200 10

GDT3 11
GD108 12 GD190L 13

GD190R 14

GD193 15 GD194 16

GDSW700 17 GDSW4 18

GD210 19

03-2013 Salford Farm Machinery Ltd. Page 81

 Salford Farm Machinery Ltd.
364018 McBeth Road, N0J 1W0
Salford, Ontario Canada
www.salfordmachine.com
1-866-442-1293