J. M.

ENGINEERS
PLOT NO. 143, PHASE-1, OPP. PATEL ALLOYS, GIDC, VATVA,
AHMEDABAD-382445. E-MAIL: [email protected] MO. 9898086612
____________________________________________________________________

JME/INTRO/ Dt :

To,
M/s.

Kind Attn :

Dear Sir,

We thank you for the kind courtesy extended to undersigned during the visit to your
premises and the discussion held for the subject requirement.

We are pleased to take this opportunity to introduce J.M.E. as a team of technocrats

and professionals who, based o their research and technology oriented approach and
smart ideas and increase your profit in unit operations of filtration, evaporation, drying
and agitation by designing and engineering the most efficient systems. In short, J.M.E.
is a potential partner to all your process equipment needs.
J.M.E. team have decades of proven experience in design, manufacture,
commissioning and after sales service of various process equipments catering to the
needs of chemicals, pharmaceuticals & bulk drugs, biotechnology, polymerizations,
paints & varnish, ink & resin dyes & intermediates, pulp & paper, portable waste water
treatment, etc.

J.M.E. is manufacturer of specialized process equipment for filtration, evaporation,

drying and agitation. Apart from the above, J.M.E. can also manufacturer and supply
various process equipments from simple storage tank and pressure vessel to complex
reactor systems and autoclaves, from simple shell and tube heat exchanger to,
complex.

J.M.E. expert can also do the free energy & mixing audit for your existing agitation &
mixing systems and will recommend suitable alternative to optimize the power and
mixing requirements. Attached is the data sheet for your ready reference. J.M.E. also
undertakes turnkey projects for chemical process and allied industries.
 AGITATOT DESIGNING

J.M.E is a team of technocrats and professionals, who, based on their research and
technology oriented approach and smart ideas, can increase your profit in unit
operations of Filtration, Evaporation, Drying and Agitation by designing and engineering
the most efficient systems. In short, J.M.E is a potential partner to all your process
equipment needs.

J.M.E team have decades of proven experience in design, manufacture, commissioning

and after sales service specialized mixing system catering to the needs of Chemical,
Pharmaceuticals & bulk drugs, Biotechnology, Polymerizations, Paint & Varnish, Ink &
Resin, Dyes & Intermediates, Pulp & Paper, Portable/Waste water treatment, etc.

J.M.E expert can also do the FREE Energy & Mixing audit for your existing Agitation &
Mixing systems and will recommend suitable alternative to optimize the power and
mixing requirements. Attached is the data sheet for your ready reference.

CONTACT J.M.E for the following:

• New Agitator Requirement/Recommendation
• Retrofitting of impeller geometry to the existing reactor for desired process
results
• Optimization of mixing based on the process requirement
• Optimization of yield/batch time/heat transfer/mass transfer etc.
• Energy efficient impellers for power saving
• Specialized impellers for Gas Dispersion (Hydrogenation/Fermentation)
• Specialized geometry for high viscosity application (Polymerization etc.)
• Crystallization with improved crystal shapes and size
• Reactor with solid/slurry contents

J.M.E also undertake turnkey projects for Chemical process and allied industries.

Impeller Technology
The key to an efficient mixing system is the impeller. For each application there is an
ideal impeller. J.M.E has decades of experience in fluid mixing, and uniquely placed to
offer effective solutions for all application areas. J.M.E’s commitment to mixing
application has helped to create a unique, modern, spectrum of impellers, which meet
the needs of processes accurately and efficiently. J.M.E’s mixers range from fractional
kW through to the hundreds of kW to suit application requirement. The use of J.M.E
impellers has generated lower capital and operating costs for many customers.

Impeller Selection
Mixing is the key to process design. Impeller selection is a key to mixer design. How
impellers convert energy into fluid motion is fundamental to their ability to provide a
predictable process result.

All the energy (P) applied by any mixing impeller produces a pumping effect (Q) and a
velocity head (H), so that P α QH
A knowledge of how this balance of energy distribution can change with impeller
geometry is fundamental to mixer design. J.M.E has used its extensive knowledge of
impeller fluid mechanics to recommend a variety of efficient, process specific, impellers.

Propeller
Axial flow Impeller

Standard Hydrofoil
Most efficient axial flow impeller for
blending, solid suspension etc.

Wide Blade Hydrofoil

Available in various no of blades
depending of flow requirement

Pitched Blade Turbine

Concave Disc Impeller
Gas Dispersion
2.5 to 5 times gas dispersion
capability than Disc Impeller

High Speed Disperser

Emulsion of immiscible fluids
Dispersion of particles

Disc Impeller
Gas Dispersion
Liquid – liquid dispersion

Folding Impeller
Where opening is very small to insert
an impeller.
It is inserted in closed position and
opens up during rotation

Helianchor
Very efficient in high viscosity mixing
and heat transfer

Helical Impeller with Augar

Very high viscosity fluids requiring
efficient mixing

Mig or Counterflow impeller

Improves the overall mixing by
creating counter current flow
between centre of the vessel and
wall of the vessel

Intermig
Modified version of Mig Impeller.
Can handle more impeller spacing
and better overall mixing
 Multi shaft agitator & Mixer
High Speed Disperser and
Anchor/helix Impeller within the same
vessel

Co Axial Impeller
Mostly used for highly viscous fluid
which requires very high shear as
well as overall mixing

Pitched Anchor/ Sectional Helix

Bottom Impeller for distillation
application where the final residue is
highly viscous or contains solids
Improving flow near the vessel wall
and centre of the vessel
Pumper Mixer
Used in mixer settler for metal
extraction application

Impeller Comparison
Not all impellers perform at a similar level of efficiency even though they may
superficially
look to be similar in design. The performance capability of flow impellers can be
compared by an evaluation of flow efficiency.

Knowledge of the flow numbers (Nq) and power number (Np) of the impellers being
compared is required. Advanced technology provides predictable mixing
Nq =Q/ND3
Nre =ND2ρ/µ

Np = Impeller power number

Nq = Impeller flow number
N = Impeller rotational speed (1/sec)
Nre = Impeller Reynolds Number
µ = Viscosity in Pas
P = Impeller power (W)
D = Impeller diameter (m)
Q = Impeller primary flow (m3/sec) (pumping capacity)
ρ = Fluid density (kg/m3)
The following basic equations can then be applied:
Impeller spectrum indicates relative power apportioned to Q and H for various impeller
types.
Np = PN3D5ρ kW
Flow (Q)
Pressure Head (Shear) H

Comparison Basis
Before two impellers can be compared, a basis for the comparison must be established.
Whilst many combinations of parameters can be applied (e.g. power required at
constant flow and speed, or constant speed and diameter), the most applicable to the
flow controlled operations of blending, solids suspension and heat transfer is constant
diameter, D and constant flow, Q. Applying the basic mixing formulae in ratio form gives
the following comparison

Parameter SHF PBT

Np .3 1.25
Nq .5 .7
Speed 60 RPM 42 RPM
Diameter 1 1
Flow 1 1
Power 1 1.5
Q/P 1 .66
Torque 1 2.13

For, J.M. Engineers,

(Mitesh Shah)
09898086612
J. M. ENGINEERS
AGITATOR DATA SHEET DATE:
CUSTOMER DETAILS
NAME :
ADDRESS :

CONTECT PERSON :
PHONE NO./ MO. : FAX:

VESSEL DATA
VESSEL NUMBER : VESSEL VOLUME :
VESSEL : NEW : EXISTING :
TYPE VERTICAL CYLINDRICAL : OTHER(SPECIFY) :
END CONFIGURATION
TOP : OPEN : FLAT CLOSED : DISH :
BOTTOM : FLAT : DISH : CONE :
IF DISHED ENDS : ELLIOTICAL : TORISPHERICAL : OTHER :
DIMENSIONS : DIAMETER MM
: WELD TO WELD HEIGHT MM
ONTERNAL COIL : YES : NO : COIL PCD :

MECHANICAL DATA
MOC : CS : SS316 : SS304 :
OTHERS:
SHAFT SEAL : PACKED GLAND : MECH. SEAL : NONE :
OTHERS:
ENVIRONMENT : FLAMEPROOF : NON FLAMEPROOF :
EXISTING DATA (IF ANY):
TYPE OF IMPELLER : TURBINE-FLAT : PICHED : DISC :
: PADDLE : ANCHOR : DISC :
IMPELLER DIAMETER : WIDTH OF BLADE :
NO. OF IMPELLERS : NO. OF BLADE :
IMPELLER DISTANCE (FROM BOTTOM) LOWER MIDDLE :
TOP:
BOTTOM GUIDE : YES : NO :
BAFFLES : YES : NO :
RPM : SHAFT DIAMETER :
MOTOR HP : MOTOR RPM :
GEAR RADIO : GEAR MODEL :
DRIVE : DIRECT : V-BELT :

PLOT NO. 143, PHASE-1, OPP. PATEL ALLOYS, GIDC, VATVA, AHMEDABAD-
382445. E-MAIL: [email protected] MO. 9898086612
 PROCESS DATA
LIQ./LIQ. BLENDING SILID ADDITION / SUSPENSION DISSOLUTION

SLURRY HOLDING GAS DISPERSION HEAT TRANSFER

DISPERSION OTHER (SPECIFY)

MAXIMUM TEMPERATURE DEG C MAXIMUM PRESSURE KG/CM 2g

PROPERTIES

LIQUID NAME DENSITY / SG VISCOSITY QUANTITY

1.

2.

SOLID NMAE DENSITY / SG PARTICAL SIZE QUANTITY

1.

2.

NATURE OF SOLID : STICKING TO WALL YES / NO

LIQUID VOLUME REQUIRING AGITATION

MINIMUM : MAXIMUM :

REQUIRED PROCESS RESULT / OTHER PROCESS DATA / BRIF PRICESS DESCRIPTION :

ANY OTHER REMARK / SKETCH

PLOT NO. 143, PHASE-1, OPP. PATEL ALLOYS, GIDC, VATVA, AHMEDABAD-382445.E-
MAIL : [email protected] MO. 9898086612
CLIENT LIST : -

Associated dyestuff Pvt. Ltd., Vatva, Ahmedabad

Auxichem Industries Lambha, Ahmedabad.
Akash Industries Naroda, Ahmedabad

Bodal Chemicals Ltd. Unit-I Vatva, Ahmedabad

Bodal Chemicals Ltd. Unit-III Vatva, Ahmedabad
Bodal Chemicals Ltd. Unit-VII Padra, Vadodara.
Bodal Chemicals Ltd. Unit-V Ankleshwar.
Bodal Chemicals Ltd. Unit-VI Panoli, Ankleshwar.
Banjo Product Pvt Ltd., Vatva, Ahmedabad
Blue Zone Engineers Vadodara
(Export to Thailend)

Crystal Quinon Pvt. Ltd., Unit-II, Vatva, Ahmedabad

Honest Bio-Vat Pvt. Ltd. Vatva, Ahmedabad

Honest Bio-Vat Pvt Ltd. Nasik. (Maharastra)

Indo-Colchem Ltd. Vatva, Ahmedabad.

Jay Chemical Ind. Ltd., Unit –I Odhav, Ahmedabad

Jay Chemical Ind. Ltd., Unit – IV, Kalmsar, Khambhat
Jay Chemical Ind. Ltd., Unit – III, Vatva, Ahmedabad
Jay Chemical Ind. Ltd., Unit – V, Sanand, Ahmedabad
Jayvir Chemical Vatva, Ahmedabad

Kiri Dyes and Chemicals Ltd Vatva, Ahmedabad

Kirti Chemical works Singarwa, Ahmedabad

Lonsen Kiri Chemical Ind Ltd. Padra, Ahmedabad.

Meghmani Organics Ltd. Vatva, Ahmedabad

Metrochem Industries Ltd. Padra, Vadodara.
Metrochem Industries Ltd. Unit-II Vatva, Ahmedabad
Mayur Dyechem Ltd. Vatva, Ahmedabad.
Maruti Multichem Pvt. Ltd. Naroda, Ahmedabad
Maruti DyeChem Pvt. Ltd. Naroda, Ahmedabad

Pashupati Industries Naroda, Ahmedabad

Ravi Dyeware Industries Ltd Taloja, Mumbai.

Rohan dyes & Intermediate Ltd. Vatva, Ahmedabad
Ramhans consultants Satellite, Ahmedabad
Siddarth Colourchem Ltd. Mahad, Mumbai.
Shree Swati Tex Dyes Pvt. Ltd Naroda, Ahmedabad
Sagar Drugs & Pharma Ltd. Ahmedabad
Sulfochem Industries Vatva, Ahmedabad
Stovec Industries Ltd. ` Lambha, Ahmedabad
Shree Hari Dyes & Chemical Vatva, Ahmedabad.
Shree Sai Calnates India (P) Ltd Olpad, Surat.

Varahi Chemical Vatva, Ahmedabad.

Vismita Intermediate Pvt. Ltd. Panoli, Ankleshwar.