GENERAL & HIGH PRESSURE

CHECK VALVES
VC Series
www.unilok.com
Valves - VC Series

Features
Maximum
Cracking
Valve Series Working
Pressure
Pressure

General 3000 psig

VC3 Purpose
Fixed
207 bar

6000 psig
VC6 High Pressure Fixed
413 bar

Compact One 3000 psig

VC3C Piece
Fixed
207 bar

Compact
Adjustable 3000 psig
VC3CA Cracking
Adjustable
207 bar
Pressure

Front Ferrule
Gasket

Back Ferrule
Nut

Nut
Back Ferrule
Inlet Body O-ring Poppet Spring
Outlet Body
Front Ferrule

2
 Valves - VC Series

Cleaning Important Notification

Uni-Lok valves are free from machine oils, loose Proper installation, materials compatibility, operation
particles and grease throughout the close cleaning and maintenance of these valves are the
process. responsibility of the user. The total system design
must be taken into consideration to ensure optimal
Testing performance and safety.
Uni-Lok check valves are designed for directional
Every check valve is 100% factory tested with
flow control only.
nitrogen for cracking and reseal performance.
The special cleaning for hign purity application is
available upon request.

How To Order
Uni-Lok VC series check valves are ordered by part Example : The following part number, VC31U-04T-
number as shown as below. SS -01 is designated for VC3 series check valve with
�, Uni-Lok tube fitting, 1psig cracking
both 1/4
pressure, 316SS.

V C31 U 04T SS 01
Uni-Lok Valve Connection Size Body Cracking O-ring
Valve Type Type Materials Pressure Materials

Valve Type Connection Type Cracking Pressure

C3 3000psig Fixed CP Fractional(Inch) Tube O.D. Designation 1/3 1/3 psig
C6 6000psig Fixed CP Tube inch 1/8 1/4 3/8 1/2 3/4 1 01 1 psig
3000psig Compact O.D. mm 3.17 6.35 9.52 12.70 19.05 25.40 03 3 psig
C3C
Fixed CP Designator 02T 04T 06T 08T 12T 16T 10 10 psig
3000psig Compact 25 25 psig
C3CA Metric Tube O.D. Designation
Adjustable CP 100 100 psig
Tube mm 12 25
CP-Cracking Pressure 3 6 8 10
O.D.
O-ring Materials
Connection Type Designator M03T M06T M08T M10T M12T M25T
None Viton
U Uni-Lok Tube Fitting
Pipe Size Designation (NPT or ISO7/1-PT) E Ethylene Propylene
F Female NPT or ISO7/1(PT)
Pipe Size 1/8 1/4 3/8 1/2 3/4 1 N Buna N
M Male NPT or ISO7/1(PT)
Designator 02N/R 04N/R 06N/R 08N/R 12N/R 16N/R P Neoprene
C UCR
K Kalrez
UCR Size Designation
UCR-Metal Face Seal End
Tube Size 1/4 1/2 Seal kits and spring kits
Body Materials Designator 04C 08C are available for retrofit
SS 316SS or maintenance. Contact
BS Brass Uni-Lok local
MO Alloy 400 distributors.

3
Valves - VC Series

VC3 series
(3000 psig, Fixed Cracking Pressure)

H h Materials of Construction
No. Description Materials
Body Material 316SS Brass
1 Inlet Body 316SS Brass

T
E
2 Outlet Body 316SS Brass
3 O-ring Viton NBR
4 Gasket 304SS
1 3 4 5 6 2 5 Poppet 316SS Brass
6 Spring 302SS
L
Poppet - Silicone based lubricant
Inlet Body - Molybdenum dry film lubricant

Ordering Information & Dimensions Pressure Rating at 70�

F(21�
C)
End Connection Dimensions (mm) 316SS Brass
Part Number Cv Series
Inlet Outlet L h psig bar psig bar
U-02T- 1/8" Uni-Lok 0.16 54.5
U-04T- 1/4" Uni-Lok 59.0 VC31 3000 207 3000 207
U-M06T- 6mm Uni-Lok 59.0
VC32
VC31 F-02N- 1/8" Female NPT 46.5 15.87 3000 207 3000 207
0.47 VC33
M-02N- 1/8" Male NPT 47.3
VC34
M-04N- 1/4" Male NPT 52.6
VC35 2000 138 1500 103
MU-04N04T- 1/4" Male NPT 1/4" Uni-Lok 56.0 VC36
U-06T- 3/8" Uni-Lok 80.4
U-M10T- 10mm Uni-Lok 81.7
VC32 1.48 19.05 Cracking -
F-04N- 1/4" Female NPT 54.5
M-06N- 3/8" Male NPT 70.6
Reseal Pressure (psig)

U-08T- 1/2" Uni-Lok 1.70 85.6 Norminal Cracking Pressure

Range Reseal
U-M12T- 12mm Uni-Lok 86.0 Cracking
VC33 22.22 Pressure
Pressure Min. Max.
F-06N- 3/8" Female NPT 76.2
M-08N- 1/2" Male NPT 83.0 1/3 0 3 up to 6
U-10T- 5/8" Uni-Lok 88.0 1 0 4 up to 5
VC34 2.60 28.58
F-08N- 1/2" Female NPT 91.2 3 2 7 up to 4
U-12T- 3/4" Uni-Lok 91.8 10 7 15 3
VC35 F-12N- 3/4" Female NPT 5.20 87.5 31.75 25 20 30 17
M-12N- 3/4" Male NPT 86.0 50 40 60 35
U-16T- 1" Uni-Lok 106.3 75 60 90 53
34.93
VC36 F-16N- 1" Female NPT 8.00 123.0 100 80 120 70
M-16N- 1" Male NPT 115.0 41.28

ISO7/1 Tapered Threads (PT) are available for all fractional sizes of VC
series valves. Add “R” as a suffix instead of “N”.

Dimensions are for reference only and are subject to change without prior notice.

4
 Valves - VC Series

VC6 series
(6000 psig, Fixed Cracking Pressure)

Materials of Construction
1 3 4 5 6 7 2
No. Description Materials
1 Inlet Body 316SS
2 Outlet Body 316SS
Viton bonded
3 Poppet
316SS
4 Poppet Stop 316SS
5 Spring 302SS
H h 6 O-ring Viton
L
7 Backup Ring PTFE

Pressure Rating at 70�

F(21�
C)
Ordering Information & Dimensions 316SS
Series
End Connection Dimensions (mm) psig bar
Part Number Cv
Inlet Outlet L h VC61
6000 413
U-02T- 1/8" Uni-Lok 57.7 VC62
U-04T- 1/4" Uni-Lok 61.7
VC63 5000 344
VC61 U-M06T- 6mm Uni-Lok 0.67 61.7 17.46
M-02N- 1/8" Male NPT 44.8
M-04N- 1/4" Male NPT 54.8 O-ring Seal
U-06T- 3/8" Uni-Lok 69.9
U-08T- 1/2" Uni-Lok 75.2
Temperature Rating
U-M08T- 8mm Uni-Lok 68.6 Temperature
25.40 O-ring Materials Rating
U-M10T- 10mm Uni-Lok 71.1
VC62 U-M12T- 12mm Uni-Lok 1.80 75.2 �C �F
F-06N- 3/8" Female NPT 64.8 Viton -28 ~ 204 -18 ~ 400
F-08N- 1/2" Female NPT 77.0 26.98 Ethylene Propylene -45 ~ 135 -49 ~ 275
M-12N- 3/4" Male NPT 59.2 Buna N -20 ~ 105 -4 ~ 221
25.40
M-16N- 1" Male NPT 69.2 Neoprene -40 ~ 121 -40 ~ 250
U-12T- 3/4" Uni-Lok 110.0 31.75 Kalrez -20 ~ 315 -22 ~ 599
U-16T- 1" Uni-Lok 120.0
34.92
VC63 U-M25T- 25mm Uni-Lok 4.70 120.0
F-12N- 3/4" Female NPT 104.0 31.75 CNG Application
F-16N- 1" Female NPT 123.0 34.92 Uni-Lok VC6 series, high pressure check
valves are available for CNG application with
ISO7/1 Tapered Threads (PT) are available for all fractional sizes of VC CNG compatible HNBR O-ring .
series valves. Add “R” as a suffix instead of “N”.
To order, add -H to the end of part number.

Dimensions are for reference only and are subject to change without prior notice.

5
Valves - VC Series

VC3C series
(3000 psig, Compact, Fixed Cracking Pressure)
1 2 3 4 5 6 Ordering Information & Dimensions
Dimensions
End Connection
Part Number Cv (mm)
Inlet Outlet L h
F-04N- 1/4" Female NPT 61.0 19.05
M-04N- 1/4" Male NPT 41.0 14.28
VC3C1 0.35
MF-04N- 1/4" Male NPT 1/4" Female NPT 44.0
19.05
FM-04N- 1/4" Female NPT 1/4" Male NPT 58.0
h
F-08N- 1/2" Female NPT 94.0 26.98
L
VC3C2 M-08N- 1/2" Male NPT 1.20 58.0 22.22
MF-08N- 1/2" Male NPT 1/2" Female NPT 72.0 26.98
Materials of Construction
No. Description Materials ISO7/1 Tapered Threads (PT) are available for all fractional sizes of VC
series valves. Add “R” as a suffix instead of “N”.
1 Insert Lock Screw 316SS
2 Insert 316SS
3 O-ring Viton
4 Poppet 316SS
5 Spring 302SS
6 Body 316SS

VC3CA series
(3000 psig, Compact, Adjustable Cracking Pressure)
1 2 3 4 5 6 7 8 Ordering Information & Dimensions
End Connection Dimensions (mm)
Part Number Cv
Inlet Outlet L h
F-04N- 1/4" Female NPT 75.7 19.05
VC3CA1 0.35
M-04N- 1/4" Male NPT 41.1 14.28
VC3CA2 M-08N- 1/2" Male NPT 1.20 65.0 22.22
h
L

Adjustment of Cracking Pressure

Materials of Construction 1. Unscrew “locking screw” counter-clockwise.
Locking Screw
Allen Key

2. Slide “allen key” up to “adjustable screw” position.

Adjustable Screw

No. Description Materials 3. Turn “adjustable screw”;

1 Insert Lock Screw 316SS
2 Insert 316SS
To decrease To increase
Outlet

3 O-ring Viton cracking pressure cracking pressure

4 Poppet 316SS
5 Spring 302SS
6 Body 316SS 4. Move out “allen key” up to “locking screw” position.
5. Turn “allen key” clockwise.
7 Adjustable Screw 316SS
8 Locking Screw 316SS
Inlet

Dimensions are for reference only and are subject to change without prior notice.

6
 Line up

Instrumentation UHP(Ultra High Purity)

Fittings Fittings

∙Tube Fittings ∙Precision Pipe Fittings ∙Weld & Metal Face Seal Fittings ∙Cylinder Connectors
∙PTFE Fittings ∙Fusible Connectors ∙Pipe &Tube Fittings
∙Hose & Push-On Connectors ∙Dielectric Fittings ∙Flanges

Valves Valves

∙VB1 series Precision & Clean Ball Valves ∙VCD series Diaphragm Valves
∙VB2 series Swing-Out Ball Valves ∙VCB series Bellows Valves
∙VB3 series Instrumentation Ball Valves ∙VCC series Welded Check Valves
∙VB6B series High Pressure Bar Stock Ball Valves
∙VB6F series High Pressure Forged Ball Valves
∙VB6T series Trunnion Ball Valves
∙VP series Plug Valves

∙VN5 series Integral Bonnet Forged Needle Valves

∙VN6 series High Pressure Bar Stock Needle Valves
CONNECTS THE WORLD SINCE 1984
∙VU6 series Union Bonnet Valves WITH THE SAME ATTITUDE
∙VMT series Metering Valves
OF THE TIME OF BEGINNING
∙VM series Instrumentation Manifolds Valves
∙VG series Gauge & Gauge Root Valves
∙VL series Bleed Valves

∙VD series Double Block and Bleed Valves

∙VC series General & High Pressure Relief Valves

∙VR series Low & High Pressure Relief Valves
∙VE series Industrial Excess Flow Valves

∙VF series T & In-Line Filters

∙VPR series Pressure Reducing Valves
∙VBR series Back Pressure Regulators

Others
∙Seamless & Welded Tubing
∙Condensate Pots