Scribd
Upload
76 views3 pages

Badis Kandjra Resume

Badis Kandjra is an instrumentation and electrical technician with over 7 years of experience in injection pump repair, instrumentation maintenance, and field service in oil, gas, refinery and chemical plants. He is fluent in English and Arabic with good French skills. He has a degree in electrical engineering and certifications in industrial automation, oil and gas instrumentation, and uninterruptible power supply maintenance.

Uploaded by

Badis Kandjra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
76 views3 pages

Badis Kandjra Resume

Badis Kandjra is an instrumentation and electrical technician with over 7 years of experience in injection pump repair, instrumentation maintenance, and field service in oil, gas, refinery and chemical plants. He is fluent in English and Arabic with good French skills. He has a degree in electrical engineering and certifications in industrial automation, oil and gas instrumentation, and uninterruptible power supply maintenance.

Uploaded by

Badis Kandjra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

BADIS KANDJRA

INSTRMENT & ELECTRICAL TECHNICIAN


[email protected] +213 676 48 41 33

linkedin.com/badis-kandjra skikda, algeria

L A N G U A G E S : English: Fluent French: Average Arabic: Mother tongue.

SUMMARY

More than 7 years of experience between injection pumps (DIESEL) repair AND field of
instrumentation with good hand-on experience in maintenance in oil & gas field , refinery and
chemical plants, calibration and trouble-shooting of all type process control instrumentation and
fire & gas field , all valves pneumatic types , Good knowledge of micromechanics and diesel engine
mechanics, Dedicated and highly skilled with meticulous and accurate attention to minute details,
Seek for a challenging position with opportunities for a personal and professional growth.

WORK EXPERIENCE

Instrumentation technician - SONATRACH Company, ALGERIA 02/2020 - Present

• Able to read instrument Data Sheets for various field instruments, Preparation of Instrument list,
review of P&I Diagrams and Process Flow Diagrams.
• Work with latest protocol and solid domain knowledge of handling instrumentation such as:
foundation field bus and hart communicators (HART 375), instrument loop testing, functional
test, calibration & commission activities in process area instruments.
• Familiar with installation of field instruments and advance types instruments calibration, tubing
cabling and cable tray work, instruments support, control panel installation.
• Working with different types of pressure & flow smart transmitter, calibration with multi-
functional calibrator.
• Calibration & checking of flow meters like turbine flowmeter, magnetic flowmeter, rotameter.
• Calibration of different level transmitter like a DP type, level troll, displacer, radar, capillary type.
• Calibration of temperature transmitter (TT) using decade resistance box.
• Calibration and checking: level switches (LSHH, LSLL) and Pressure switches (both electric &
pneumatic) (PSHH, PSLL), temperature switches.
• Having good maintenance experience in metering instrument systems, oil and gas well head
instruments maintenance experience, with control and monitoring of SCADA systems.
• Working with gas lifting compressor based all type switches (pressure, level, vibration).
• Responsible for repair and testing of various valves, including ball valves, gate valves ,butterfly
valves ,safety relief valves . (MASONEILAN, FISHER, FLOWSERVE …) up to 20”, motor operated
valve (BIFFI & ROTORK).
• Installing & servicing of fire alarm systems, smoke detection linear heat detection and Gas
detection systems, fire suppression and extinguishing agent and sprinklers, water spray
systems interfaced with fire alarm panels.
• Testing and troubleshooting of SIMPLEX 4100ES USA addressable fire alarm panel, control
rooms, and SILVANI CS 400-R fire alarm panels and systems.
• Testing and troubleshooting of fire extinguishing agent’s solenoid valves, directional valves
and pressure switches, sprinklers, water spray and deluge valves systems interfaced with fire
alarm systems in the substations, control rooms and transformers.
(Rosemount, Enders & Hauser, ABB, Yokogawa, Honeywell)

Diesel injection technician - RB-diesel injection Equipment repair 05-2012 / 01-2016


(part time)
I worked 3 years diesel workshop where I repaired diesel pump injection in various
applications from cars, trucks and tractors, marine, generators also:
• worked fuel injection equipment like Bosch 12PSB EPS625 test bench (hydraulic, electric).
• Repair, calibrate and test Bosch (VE, VA, A, P, PF) and EDC HDK pumps, Lucas CAV DPA DPC,
Delphi DPS DP200, DP210.
• repairs Bosch CP1, CP2 and Delphi common rail pumps and injectors.
• test continental, Siemens VDO and Denso injectors.
• I have good knowledge of diesel mechanics, spare parts and troubleshooting.

TRAINING AND CERTIFICATION

➢ Professional training: automation production and maintenance dairy plant


SAHLAIT 2014-2017
• Troubleshooting of dairy automation equipment, cooling water system, heat transfer
equipment, pasteurizer, sterilizer, bagger and homogenizer (FRAU IMPIANTI UHT600)
• Carryout RCAs on automation failures and Calibrate AGRI-FOOD plant instruments.
• Conduct instrumentation evaluation and troubleshooting for electrical, pneumatic, electronic as
well as programmable logic control (PLC) systems ALLEN-BRADLEY AND SIEMENS S-1500.
• Ensure to commission instrumentation effective following with repair and replacement.
• Knowledge and maintenance of utilities equipment such as steam boilers, air compressors,
refrigeration plants and water treatment plants are essential.
• Procedures for instruments used for measuring and controlling flow, level, pressure,
temperature, chemical composition and other variables in Manufacturing and processing
Inspect and test operation of instruments and systems to diagnose faults using pneumatic,
electrical and electronic testing devices and precision measuring instruments.
• Repair and adjust system components, such as Sensors, transmitters and programmable logic
controllers, or remove and replace defective parts -Calibrate components and instruments
according Existing and new plant equipment and processes Consult with and advise process
operators.
WAGO compact CC100 – OMRON – ALLEN-BRADLEY AND SIEMENS S-1500
➢ Specialized training in oil and gas instrumentation -PETROLEUM IAP SKIKDA may
2019 – February 2020

 Technologies in measurements  communication technologies


 instrumentation Analyzer  DCS YOKOGAWA generalities
➢ Operation and maintenance of INVERTER UPS CP 70 Z from SARL SCET ENERGIE
17-18- 19 Janvier 2021
 Preventive maintenance in INVERTER UPS CHLORIDE

EDUCATION
• Electrical engineering degree – skikda university 2015 – 2018
• Automatism and regulation bts – insfp lamri boudjemaa (institute) 2014 - 2017

S K I L L S : Sensors, Electronic Devices, Automation, Knowledge of diesel mechanics.


Microsoft ( Word, Excel, Access, PowerPoint, Publisher ),
Siemens TIA Portal, ALLEN-BRADLEY RSLOGIX 5000

You might also like