Scribd
Upload
68 views4 pages

Pre Course Hydro Ex

well control

Uploaded by

daniel abia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
68 views4 pages

Pre Course Hydro Ex

well control

Uploaded by

daniel abia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 4
ABERDEEN DRILLING SCHOOL PRE - COURSE HYDROSTATICS EXERCISE PRE COURSE HYDROSTATICS EXERCIS! 1. Define the following a.) Fluid Gradient b.). Specific Gravity c.) Hydrostatic Pressure 2. Calculate the specific gravity of: a.) 30°API Oil b.) 43° API Oil c.) 23°APLOBM d.) 12 Ib/gal Brine ©) 14 ppg B ne £.) 9 Ib/gal Brine 3. What is the hydrostatic pressure in the following examples? a) LI ppg fluid to 3,600 ft b.) 6,000 ft of fluid with a gradient of 0.365 psi/f c.)_ 36° API fluid to 8700 ft. Aberdeen Drilling Schools 2006 Rev 3 11/06 14 4, 5 ABERDEEN DRILLING SCHOOL PRE - COURSE HYDROSTATICS EXERCISE ‘What is the bottom hole pressure in the tubing of a well with the following conditions? TVD 18,300 ft 32° API oil t 8500 ft MD (6500 ft'TVD) 0.6 SG Gas to surface (use tables in manual) SITHP of 1,050 psi Using the following information: TD 9,400 ft TVD/MD. "XN" Nipple at 9,150 ft TVD/MD Packer at 8,800 ft TVD/MD SSD at 8,750 ft TVD/MD ‘The well has a SITHP of 800 psi, 36° API Fluid to 6,500 ft, gas of gradient 0.04 psisft Annulus is filled with a 9 ppg brine. a.) Calculate differential pressure between annulus and tubing at the "SSD". .) Explain what you would do to tubing head pressure before opening the SSD and why. ‘Aberdeen Drilling Schools 2006 Rev 3 11/06 ABERDEEN DRILLING SCHOOL. PRE - COURSE HYOROSTATICS EXERCISE RE COURSE HYDROSTATICS EXERCISE : ANSWER: (b) © ) (b) (©) (@) e) fO} (a) (b) «) The fluid gradient is the rate of i and is usually expressed in psi/ft. Specific Gravity (Sg.) is the ratio of the density a substance compared to an accepted standard density e.g. fresh water (for a liquid), The hydrostatic pressure of a fluid is the pressure exerted by a stationary column of fluid. rease or decrease of pressure with depth Formula to give Specific Gravity (Sg.) from an API Gravity is 14.5 1315 + APE Sg. = 141.5 + (131.5 +30) = 1415 + 161. Sg. = 1415 + (131.5 +43) = 141.5 + 174. Sg. = 141.5 + (131.5 +23) = 141.5 + 154. 0.88 =0.81 0.92 ww Fluid density Specific Gravity (Sg) = Density of fresh water Sg.=12+834= 144 Sg. = 14+ 8.34 = 1.68 Sg.= 9 +8.34= 1.08 Hydrostatic Pressure = PPG x 0.052 x TVD Pressure Gradient x TVD HP. = 11 x 0.052 x 3600 = 2059.2 psi HP. = 0.365 x 6000 = 2190 psi 1415 Sg 131.5 + APE Sg. (oil) = 141.5 + (131.5 + 36) = 141.5 + 167.5 = 0.845 To convert Sg. to a pressure gradient (psi/ft) multiply Sg. by 0.433 (gradient of fresh water in psi/ft) Pressure Gradient (oil) = Sg. x 0.433 845 x 0.433 = 0.366 psi/ft 366 x 8700 = 3184.2 psi HP. Aberdeen Drilling Schools 2006 Rev 3 11/06 13 (a) (b) ABERDEEN DRILLING SCHOOL PRE - COURSE HYDROSTATICS EXERCISE BHP = Surface Pressure + Hydrostatic Pressures SITHP + Hydrostatic Oil + Hydrostatic Gas where: SITHP 1050 psi Sg (oil) = 141.5 +(13 1.5 + 32) = 141.5 + 163.5 = 0.865 Pressure Gradient (oil) = 0.865 x 0.433 = 0.374 psi/ft 0.6 Sg. Gas has a correction factor of 1.145 at 6500 ft TVD (from tables) Hydrostatic Oi Hydrostatic Gas 374 x (18300-6500) = 0.374 x 11800 = 4413.2 psi (CF-1) x SITHP = 0.145 x 1050 = 152.25 psi BHP = 1050 + 4413.2 + 152.25 = 5615.45 psi Hydrostatic (annulus) = 9 x 0.052 x 8750 = 4095psi BHP (SSD) = SITHP + Hydrostatic (oil) + Hydrostatic (gas) where: SITHP = 800 psi Sg (oi + (131.5 +36) = 141.5 + 167.5 = 01 Pressure Gradient (oil) = 0.845 x 0.433 = 0.366 psi/ft BHP (SSD) 800 + (0.3 x 2250) + (0.04 x 6500) Pressure Differential is 4095-1883.5 =2211.5 psi between annulus and tubing at SSD A plug could be placed in the "XN" nipple and the tubing pressured up to 301.5 psi before opening the SSD i.e. pressures would be equalised, avoiding the possibility of blowing the toolstring up the hole. Alternatively, inhibited brine could be lubricated into the tubing above the plug, increasing BHP until balanced with annulus. Aberdeen Drilling Schools 2006 Rev 3 11/06

You might also like