FLIR IRW-Series

IR Inspection Windows

FLIR IR Windows for

Safer Electrical Inspections

Broadband Crystal Lens

Easy PIRma-Lock™ Installation

Quick Access Permanent Hinged Cover

Compatible with All Thermal Cameras

Quality FLIR Products Online at: www. GlobalTestSupply.com [email protected]

 Introducing FLIR IRW-Series
for Safer, More Efficient Electrical IR Inspections

Opening electrical cabinets to perform IR and visual inspections of

live components is dangerous work, exposing you to the risk of a
hazardous arc flash incident. Out of necessity, it’s also a painstaking,
time-consuming process.

Now you can put the added safety of new FLIR IR Windows between
you and energized equipment to better protect yourself and eliminate
the need for opening enclosures. Much easier to install and use than
other brands, FLIR IR Windows help you work faster with greater
confidence. Perform inspections more efficiently and reduce the threat
of arc flash injury significantly so you can get more done and stay in
compliance with NFPA 70E requirements.

All FLIR IR Windows feature a secure, permanently-hinged cover that

opens easily with one hand, which means there’s nothing to remove,
drop, mix up, or lose. FLIR’s broadband crystal allows cameras to
capture visible light pictures as well as thermal images and lets
LED and laser illumination pass straight through for clearer visual
assessments.
 
Combine FLIR IR Windows with a FLIR thermal camera that features
integrated visible light video, lamps, and a laser pointer, and you’ll be
set to get the job done single-handedly.

PIRma-Lock™ Ring Nut Broadband Crystal Lens

Permanent Hinge

Permanent ID Label

Gasket Thumb Screw Release

Quick-Access Flip Down Cover

Visit www.flir.com, or call 866.477.3687

Quality FLIR Products Online at: www. GlobalTestSupply.com [email protected]

 FLIR IR Windows Features:
Easy Installation – FLIR IR Windows install quickly and securely using
the same design as common conduit connections:
• Only one hole to create for each window
• One simple PIRma-Lock™ ring nut to tighten
• Uses standard US punch tools for hole knockouts

PIRma-Lock™ Reliability – Tried and true locknut technology makes

FLIR’s locking ring an IR window first:
• Teeth lock tight to the inside of the panel
• Automatically grounds metal components
• No screw holes required that might later strip out

Quick Access Hinged Cover – Simple thumb screw releases the

permanently-hinged IR window cover:
• Easy, flip-open hatch for faster scans
• Prevents dropping, mix-ups, and loss
• Inside label for permanent identification

Broadband Crystal IR Window – Lens encased in rugged, anodized

aluminum frame allows indoor & outdoor scans:
• Transmits short, mid and longwave IR images
• Supports visual inspections and fusion features
• Lets laser pointers and illumination shine through

Greater Productivity and ROI – Significantly reduces inspection time

for more efficient assessments within NFPA 70E guidelines:
• Requires only one person instead of three
• Can reduce or eliminate need for cumbersome PPE
• Helps reduce vast majority of arc flash triggers

FLIR Integrity – FLIR backs IRW-Series windows with comprehensive

testing and a limited lifetime warranty:
• Meets relevant UL, CSA, IEC, and IEEE standards/ratings
• Tested samples withstood arcs, vibration, and extreme humidity
• Limited Lifetime Warranty against manufacturer defects

One hole to cut. Easy placement. Single PIRma-Lock™ ring nut.

Quality FLIR Products Online at: www. GlobalTestSupply.com [email protected]

 General Specifications FLIR IR Window 2” - IRW-2C FLIR IR Window 3” - IRW-3C FLIR IR Window 4” - IRW-4C
NEMA Environment Type Type 4/12 (outdoor/indoor) Type 4/12 (outdoor/indoor) Type 4/12 (outdoor/indoor)
Voltage Range Any Any Any
Automatically Grounded Yes Yes Yes
Maximum Operating Temperature 500°F/260°C 500°F/260°C 500°F/260°C
Body Material Anodized Aluminum Anodized Aluminum Anodized Aluminum
Gasket Material Silicone Silicone Silicone
Hardware Material Steel Steel Steel
Compatable with All FLIR Cameras Yes Yes Yes
PIRma-Lock Installation System Yes Yes Yes
Cover and Fastener Permanently Attached Yes Yes Yes
Single-hole Installation Yes Yes Yes
Thumb Screw and Safety Screw Included Yes Yes Yes
Broadband IR: Short-, Mid-, & Longwave Yes Yes Yes
Visible Light Spectrum Yes Yes Yes
Picture-in-Picture & Fusion Image Blending Yes Yes Yes
Size Specifications
Overall Height 85.5mm (3.36”) 107.4mm (4.22”) 136.5mm (5.37”)
Overall Width 73mm (2.87”) 99mm (3.89”) 127mm (5.01”)
Overall Thickness 25.5mm (1.00”) 26.86mm (1.05”) 29.25mm (1.15”)
Required Actual Hole Diameter (Nominal) 60.3mm (2-3/8”) 88.9mm (3-1/2”) 114.3mm (4-1/2”)
Greenlee Punch 76BB 739BB 742BB
Recommended Panel Thickness Up to 3.2mm (1/8”) Up to 3.2mm (1/8”) Up to 3.2mm (1/8”)
Maximum Panel Thickness 4.76mm (3/16”) 4.76mm (3/16”) 4.76mm (3/16”)
Optic Specifications
Optic Material Calcium Fluoride Calcium Fluoride Calcium Fluoride
Optic Diameter 50mm (1.97”) 75mm (2.95”) 95mm (3.74”)
Viewing Aperture Diameter 45mm (1.77”) 69mm (2.71”) 89mm (3.50”)
Viewing Aperture Area 1590mm² (2.46in²) 3739mm² (5.79in²) 6221mm² (9.64in²)
Optic Maximum Temperature 1355.6°C (2474°F) 1355.6°C (2474°F) 1355.6°C (2474°F)
Ratings & Testing
UL Component Recognition (UL 50V) Yes Yes Yes
UL 50 / NEMA Environment Rating Type 4/12 Type 4/12 Type 4/12
CSA Certification, Product Class 3211 07 Yes Yes Yes
Arc Flash Testing, IEC 62271-200 (KEMA) 5kV, 63kA for 30 Cycles at 60Hz
IP Rating, IEC 60529 (TUV) IP67 IP67 IP67
Vibration Testing, IEC 60068-2-6 (TUV) 100 m/s^2 Vibration Withstand
Humidity Testing, IEC 60068-2-3 (TUV) Extreme Humidity Withstand
Mechanical Testing, ANSI/IEEE C37.20.2 section A3.6 (TUV) Impact and Load Resistant Cover
Maximum Pullout Strength 657 kg (1450 lbs) 1655 kg (3650 lbs) 1678 kg (3700 lbs)
Other
Warranty Limited Lifetime Warranty Against Manufacturer Defects

BOSTON PORTLAND SANTA BARBARA CANADA

Corporate Headquarters
FLIR Systems, Inc. FLIR Systems, Inc. FLIR Systems, Inc. FLIR Systems, Ltd.
9 Townsend West 27700 SW Parkway Ave.
Nashua, NH 03063 70 Castilian Dr. 920 Sheldon Court
USA Wilsonville, OR 97070 Goleta, CA 93117 Burlington, ON
PH: +1 866.477.3687 USA USA L7L 5L6
PH: +1 603.324.7611 PH: +1 866.477.3687 PH: +1 866.477.3687 PH: +1 800.613.0507

www.flir.com
NASDAQ: FLIR

GlobalTestSupply.com
Copyright ©2011, FLIR Systems, Incorporated. All other brand and product names are trademarks of FLIR Systems, Incorporated.
Quality FLIR Products Online at:
Imagery used for illustration purposes only.
www.
1008965 rev.12/12
[email protected]