Scribd
Upload
27 views

Illustration 1 g03130476

Uploaded by

ruobing Han
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
27 views

Illustration 1 g03130476

Uploaded by

ruobing Han
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

2022/11/17 10:39 SIS 2.

2015/09/28 Fuel Injection Pump (KENR9367-12)

SMCS - 1251, 1290 i05572510

Illustration 1 g03130476

Specification for 379-0150 Fuel Injection Pump Gp 


Item  Qty  Part  Specification Description 
1  2  143-9392 Stud  Use the following procedure in order to tightening the studs and the bolts as shown in the Illustration 1: 
1. Tighten to 19 ± 1 N·m (168 ± 95 lb in). 
2  4  5P-8347 Bolt  2. Again, turn to reach the final turn angle of 30 ± 1 degrees.
3. Final tightening torque should be 30 to 40 N·m (22 to 30 lb ft).
3  1  9S-8004 O-Ring Plug  Torque to 35 ± 4 N·m (26 ± 3 lb ft). 
4  1  9S-8005 O-Ring Plug  Torque to 70 ± 5 N·m (52 ± 4 lb ft). 
5  1  9S-8003 Plug  Torque to 20 ± 2 N·m (177 ± 18 lb in). 
6  1  143-9392 Stud  Torque to 30 ± 4 N·m (266 ± 35 lb in). 
7  2  6V-5135 Socket Setscrew  Torque to 25 ± 2 N·m (221 ± 18 lb in). 
8  1  9S-4180 Plug  Torque to 4.5 ± 0.5 N·m (39.8 ± 4.4 lb in). 
9  1  104-6385 Stud  Torque to 30 ± 4 N·m (266 ± 35 lb in). 
10  2  6V-3940 Bolt  Torque to 30 ± 4 N·m (266 ± 35 lb in). 
11  1  294-3031 Special Bolt  Torque to 9 ± 1 N·m (80 ± 9 lb in). 
12  3  8C-8545 Bolt  Torque to 7.0 ± 0.4 N·m (62.0 ± 3.5 lb in). 
13  1  6V-5845 Bolt  Before assembly, apply red Loctite 271 to the threads. 

https://sis2.cat.com/#/print-preview/service/%257B%2522title%2522%253A%2522Fuel%2520Injection%2520Pump%2520(KENR9367-12)%2522%252C%2522formattedPublicationDate%2522%253A%25222015%2… 1/2
2022/11/17 10:39 SIS 2.0

1. Tighten to 200 ± 5 N·m (148 ± 4 lb ft) and rotate to 180 degrees counter clock wise.
2. Again tighten to 200 ± 5 N·m (148 ± 4 lb ft).
3. Turn to reach the final turn angle of 31 ± 2 degrees.
4. And final tightening torque should be 500 ± 50 N·m (369 ± 37 lb ft).

Table 1

PPI-00014AF1
2022/11/17
02:38:22+08:00
i04945506
© 2022 Caterpillar Inc.
Caterpillar:
Confidential Green

https://sis2.cat.com/#/print-preview/service/%257B%2522title%2522%253A%2522Fuel%2520Injection%2520Pump%2520(KENR9367-12)%2522%252C%2522formattedPublicationDate%2522%253A%25222015%2… 2/2

You might also like