ALCM-MB

Micro-Bend Coriolis
Mass Flowmeter
Model ALCM Series

GENERAL
SMARTMEASUREMENT’s ALCM-MB Micro-Bend Coriolis Mass flowmeter employs
a unique tube arrangement with U-shaped measuring tubes that are formed with a
significantly smaller radius versus traditional U-tube type Coriolis meters. The more
gradual radius of the ALCM-MB’s tube geometry provides for a more compact design
and significantly reduced pressure differential versus other Coriolis meters.
The ALCM-MB features an easy-to-read color OLED display that can be configured to
display either mass or volumetric flow rates in a variety of user-selectable engineering
units as well as density, temperature, and totalized flows. This meter offers excellent
value by providing a highly accurate, compact instrument that can measure flow,
density, and temperature in a single package that has lower cost, lower pressure
differential and a more compact design versus competitive Coriolis-technology
flowmeters. The unique combination of features and benefits offered by the ALCM-MB
make it an ideal choice for applications that are found in a variety of industries including
Food & Beverage, Petrochem, Oil & Gas, Paint, and Industrial Process Control.

FEATURES
• Suitable for aggressive and contaminated media
• Measurement of mass flow, density, temperature and volume flow
• High rotation frequency and well-balanced measuring tubes
• Excellent purging and sterilization qualities due to a construction free of
dead spots
• Operation up to+ 662˚F (350˚C)
• Individual 8-point-calibration including report
• PT100 Temperature Sensor Included
• EX protection (optional)

SPECIFICATIONS
• Flow Range: 88~5,500,00lb/hr. • Process Temperature: -58~662˚F (-50~350˚C)
(40~2,500,000 kg/hr.) • Ambient Temperature: -5~312˚F (-20~55˚C)
• Line Sizes: 1/4"~12" (8-300 mm) • Max Working Pressure: 3600 psig (25MPa)
• Process Connections: Flanged (ANSI, DIN, Tri-Clamp®) • Measuring Tube Mat’l: SS per DIN1.4571 (AISI 316Ti) (std)
• Tube geometry: U-Tube with Micro Bend • Housing Material: SS #304
• Accuracy: ±0.5% of reading (std), • Power Supply: 24 VDC, ± 20%; 86~260VAC,50~60Hz
0.2% or 0.1% (opt) • Power Consumption: Less than 6W
• Repeatability: ±0.075% of reading • Outputs: 4-20 mA, 0-10 kHz pulse, RS485
• Frequency: 10-2000 Hz • Density Meas. Range: 12.5-125lb/ft3 (0.2~2.0 g/cc)
• Display: Color Graphic OLED • Density Accuracy: ±0.06 b/ft3 (0.001 g/cc)
Eng. Units (Mass): kg, lb, ton, etc. • Temperature Accuracy: up to ±1˚F (˚C)
Eng. Units (Temp): ˚C, ˚F • Water Cut Accuracy: ±0.1% of range
Eng. Units: (Vol.) m3, Liter, US Gallon/ • Approval: UL/CUL/CSA Class I, Div 1 & 2, Groups B, C & D
Imperial Gallon, etc.
• Zero Drift (%FS / °C): 0.005

REV0622

SmartMeasurement Tel: +1 414 299 3896 | Fax: +1 414 433 1606 Page: 1
 ALCM-MB Micro-Bend Coriolis Mass Flowmeter Model ALCM Series

STABILITY OF
METER SIZE FLOW RANGE LB./HR. (KG/HR.) FLOW RANGE LB./HR. (KG/HR.)
ZERO POINT
INCHES (MM) (0.2% & 0.5% ACCURACY) ACCURACY 0.15%
LB./HR. (KG/HR.)
1/4"(8) 88~1,763 (40~800) 176~1,763 (80~800) 0.17 (0.08)

3/8" (10) 110~2,204 (50~1,000) 220~2,204 (100~1,000) 0.22 (0.1)

½" (15) 220~6,130 (100~3,000) 440~6,130 (200~3,000) 0.44 (0.2)

1" (25) 661~17,630 (300~8,000) 1,322~17,630 (600~8,000) 1.32 (0.6)

1½" (40) 2,024~52,910 (1,000~24,000) 5,290~52,910 (2,400~24,000) 5.29 (2.4)

2" (50) 4,409~110,231 (2,000~50,000) 11,023~110,231 (5,000~50,000) 11 (5)
3" (80) 13,227~265,000 (6,000~120,000) 17,637~265,000 (8,000~120,000) 17 (8)
4" (100) 22,400~440,924 (10,000~200,000) 33,069~440,924 (15,000~200,000) 33 (15)

6" (150) 55,115~1,102,311 (25,000~500,000) 110,231~1,102,311 (50,000~500,000) 110 (50)

8" (200) 110,231~2,204,623 (50,000~1,000,000) 220,462~2,204,623 (100,000~1000,000) 220 (100)

10 (250) 165,346-3,306,900 (75,000~1,500,000) 330,690~3,306,900 (150,000~1,500,000) 330 (150)

12" (300) 204,623~5,511,556 (100,000~2,500,000) 440,924~5,511,556 (200,000~2,500,000) 440 (200)

Accuracy

This diagram shows typical values. Individual values may be taken from the
calibration records supplied with each meter.

Repeatability
ACCURACY 0.15% 0.20% 0.50%

REPEATABILITY ±0.05% ±0.1% ±0.25%

Accuracy is calculated based on the water measurement under the condition of +20˚C ~ 25˚C and 0.1MPa ~ 0.2MPa.

Density Measuring
DENSITY RANGE 12.5-125lb/ft3 (0.2~2.0 g/cc)

BASIC ERROR ±0.06% lb/ft3 (0.001 g/cc) Affected by the transducer

REPEATABILITY ±0.06% lb/ft3 (0.001 g/cm3)

SmartMeasurement [email protected] | www.smartmeasurement.com Page: 2

 ALCM-MB Micro-Bend Coriolis Mass Flowmeter Model ALCM Series

DIMENSIONS

-All dimensions in units of inches (mm)-

NOMINAL L L1 H H1 TOLERANCE WEIGHTS

LINE SIZE INCHES (MM) INCHES (MM) INCHES (MM) INCHES (MM) INCHES (MM) LB. (KG)

1/4" (8) 16.69 (424) 13.93 (354) 6.06 (154) 11.02 (280) 17.6 (8)
3/8" (10) 16.69 (424) 13.93 (354) 6.06 (154) 11.02 (280) ± 0.06 (1.5) 17.6 (8)
½" (15) 15.74 (400) 11.02 (280) 7.24 (184) 11.41 (290) 26.4 (12)
1" (25) 19.68 (500) 14.17 (360) 9.84 (250) 11.81 (300) 33.1 (15)
1½" (40) 23.62 (600) 18.11 (460) 11.81 (300) 12.20 (310) 55.1 (25)
± 0.1 (2.5)
2" (50) 31.49 (800) 25.19 (640) 16.14 (410) 12.59 (320) 83.8 (38)
3" (80) 35.43 (900) 27.55 (700) 19.29 (490) 13.77 (350) 171.9 (78)
4" (100) 44.48 (1130) 33.85 (860) 25.98 (660) 14.56 (370) 297.6 (135)
6" (150) 57.08 (1450) 47.24 (1200) 35.43 (900) 15.74 (400) 584.2 (265)
8" (200) 70.86 (1800) 57.08 (1450) 46.06 (1170) 16.53 (420) ± 0.14 (3.5) 947.9 (430)
10" (250) 72.83 (1850) 60.23 (1530) 46.45 (1180) 16.53 (420) 1102.3 (500)
12" (300) 78.74 (2000) 62.99 (1600) 51.18 (1300) 18.11 (460) 1388.9 (630)

SmartMeasurement Tel: +1 414 299 3896 | Fax: +1 414 433 1606 Page: 3
ALCM-MB Micro-Bend Coriolis Mass Flowmeter Model ALCM Series
TYPE OF FLUID Please provide the name of your fluid, including operating density and viscosity
FULL-SCALE FLOW RATE Please provide the max and min flow rate, normal flow rate also
LINE SIZE Please provide the line size and connection
PROCESS PRESSURE & TEMPERATURE We will calibrate your flow meter as close to your operating conditions as possible
PRESSURE DROP Please indicate the maximum allowable pressure drop
TYPE OF ELECTRONICS Please specify output and installation type (wall mount, panel mount, etc.)
POWER REQUIREMENTS Please specify AC or DC power supply

ALCM-MB SERIES
EXAMPLE 1: ALCM-MB-25F-5-1-1-CYS-NX-DC-NN
ALCM-MB ** ** ** ** ** ** ** ** ** DESCRIPTION
1/4" (8 mm) 88~1,763 Lb/hr (40~800 kg/hr) 8
⅜" (10 mm) 110~2,204 Lb/hr (50~1000 kg/hr) 10
½" (15 mm) 220~6130 Lb/hr (100~3,000 kg/hr) 15
1" (25 mm) 661~17,630 Lb/hr (300~8,000 kg/hr) 25
1½" (40 mm) 2,204~52.910 Lb/hr (1,000~24,000 kg/hr) 40
Nominal Line
2" (50 mm) 4,409~110,231 Lb/hr (2,000~50,000 kg/hr) 50
Size
3" (80 mm) 13,227~265,000 Lb/hr (6,000~120,000 kg/hr) 80
4" (100 mm) 22,400~440,924 Lb/hr (10,000~200,000 kg/hr) 100
6" (150 mm) 55,115~1,102,311 Lb/hr (5,000~500,000 kg/hr) 150
8" (200 mm) 110,231~2,204,623 Lb/hr (50,000~1,000,000 kg/hr) 200
10" (250 mm) 165,346~3,306,900 Lb/hr (75,000~1,500,000 kg/hr) 250
12" (300 mm) 2,204,623~5,511,556 Lb/hr (100,000~2,500,000 kg/hr) 300
150# ANSI Flange F
Process
300# ANSI Flange F3
Connections
Other O
0.1% 1
0.2% 2 Accuracy
0.5% 5
-58°F-257°F (-50°C-125°C) max - Standard 1
Temperature
-58°F-392°F (-50°C-200°C) max - Remote Display Only 2
Rating
-58°F-662°F (-50°C-350°C) max - Remote Display Only 3
232 psig (1.6 MPa) - Standard 1
362 psig (2.5 MPa) 2 Pressure
580 psig (4.0 MPa) 3 Rating
Other pressure (Please contact factory) O
TSY Compact Version - surface touch control, display, 4-20mA, RS485 CYS
TSY Compact Version - surface touch control, display, 4-20mA, RS485, HART CYH
Transmitter
TSY Remote Version - surface touch control, display, 4-20mA, RS485 RYS
TSY Remote Version - surface touch control, display, 4-20mA, RS485, HART RYH
Non-Explosion NX
Exdib II CT3~T6 for transducer, Exd[ib] II CT6 transmitter (for remote) XI Approval
Exdib II CT4~T6 (for compact) XD
85~260 VAC AC
Power Supply
24 VDC DC
Standard SS #316L measuring tube NN
Extra signal cable for remote type transmitters (per meter length) CBL Options
Heat Jacket HJ

10437 Innovation Drive | Suite 315 | Milwaukee, WI 53226

Tel: +1 414 299 3896 | Fax: +1 414 433 1606
SmartMeasurement [email protected] | www.smartmeasurement.com
Page: 4