Scribd
Upload
44 views2 pages

PA 4112-En - 1

This document provides information on the physical and mechanical properties of the material PA 4112. It lists the nominal and typical values for properties like density, tensile modulus, stress and elongation at break, and flexural strength. It also specifies the temperature range and declarations of conformity for conflict minerals and RoHS standards. The document notes that the given values are based on limited laboratory tests and may differ for finished parts depending on the manufacturing process and component geometry.

Uploaded by

ashfaq shaikh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
44 views2 pages

PA 4112-En - 1

This document provides information on the physical and mechanical properties of the material PA 4112. It lists the nominal and typical values for properties like density, tensile modulus, stress and elongation at break, and flexural strength. It also specifies the temperature range and declarations of conformity for conflict minerals and RoHS standards. The document notes that the given values are based on limited laboratory tests and may differ for finished parts depending on the manufacturing process and component geometry.

Uploaded by

ashfaq shaikh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Material

PA 4112

revision index revision date


1 3/26/2012 page 1/2

Physical properties nominal range typical


values
Density --- 1.40 g/cm³
DIN EN ISO 1183-1, 23 °C
Tensile modulus --- 11500 MPa
DIN EN ISO 527-1/-2
stress at break --- 210 MPa
DIN EN ISO 527-1/-2
Elongation at break --- 3 %
DIN EN ISO 527-1/-2
Flexural strength --- 300 MPa
ISO 178
Temperature range to 135°C

Declarations of conformity
This overview is purely informative and does not constitute a declaration of conformity. Please refer to the actual
declaration of conformity (DoC) including the conditions and its validity period.
Country Part Remark Expires
Conflict Mineral Free see certificate see DoC
RoHS conform including EU 2011/65 and EU2015/863 see DoC
(ROHS III)

Freudenberg
Freudenberg FST GmbH
Technology&Innovation
Material Compliance
Telefon: -
Fax: -
Email: [email protected]
Material
PA 4112

revision index revision date


1 3/26/2012 page 2/2

No ASTM D2000 properties available

The given values are based on a limited number of tests on standard test pieces (2mm sheets) produced in the laboratory. The data from
finished parts can deviate from above values depending on the manufactories process and the component geometry.
The data represents our present empirical values. It is incumbent on the person placing the order to examine whether it is suitable for its
intended purpose, before using the product. All questions regarding the guarantee of this product are in line with our terms and conditions,
inasmuch as statutory provisons do not plan for something else.

Freudenberg
Freudenberg FST GmbH
Technology&Innovation
Material Compliance
Telefon: -
Fax: -
Email: [email protected]

You might also like