Catalog Pages English Atx Feled Series Nonmetallic Led Luminaires en Us 188686
Catalog Pages English Atx Feled Series Nonmetallic Led Luminaires en Us 188686
Applications
• For use in locations where:
— Hazardous areas are designated as Zone 1 and 2 – 21 and 22
— A high degree of corrosion resistance is required
— Protection against dirt, water and moisture is necessary
• Typical applications include:
— Oil refineries
— Petrochemical facilities
— Food processing plants
— Waste and water treatment plants
— Underground tunnels
— General manufacturing facilities
Features
• Available in 5000K or 4000K Color Temperatures.
• Meets photobiological requirement for Risk Group 0 (RG0).
• Easy to retrofit in same mounting footprint as Appleton’s FE
series nonmetallic fluorescent luminaires.
• Full range of lumen outputs, with light distribution equivalent to Standard Materials
Appleton’s FE series fluorescent luminaires. • Housing: fiberglass reinforced polyester
• Corrosion-resistant fiberglass reinforced polyester body and • Lens: polycarbonate
hinged polycarbonate lens. • Gasket: elastomer
• High impact resistance housing (20 Joules – IK10) from • Internal reflector: highly reflective white powder coated
-30 °C to +55 °C (-22 °F to +131 °F) ambient temperature aluminum
and wind profile for use in extreme offshore and onshore • Mounting accessories available in different materials such as
environments. gray painted aluminum, zinc plated steel, galvanized steel or
• 60,000+ hour LED life for years of maintenance free operation. 316 stainless steel
• Lightweight design, hinged cover with captive screws, and ATEX/IECEx Certifications and Compliances
terminal block wiring for easy installation and maintenance.
• Contemporary, low profile design suitable for tight spaces. • Certification Type: FELED
• Standard screw-type terminal block can accept 4 to 6 mm2 wire. — Gas: Zones 1 and 2
• Field replaceable LED driver. – Conforming to ATEX 2014/34/EU: II 2 G
• Industry-leading thermal management for safe, reliable – Type of Protection: Ex db eb mb IIC Gb
operation over wide temperature range. – Temperature Class: T6 to T5
• Universal, high efficiency, drivers cover voltage requirements for — Dust: Zones 21 and 22
100-240 Vac, 50/60 Hz +/- 10%. – Conforming to ATEX 2014/34/EU: II 2 D
• High power factor electronic ballast (>0.95). – Type of Protection: Ex tb IIIC Db
• Standard 2KV surge suppression. – Surface Temperature: +63 °C to +85 °C (+145 °F to +185 °F)
• M20 plug or M25 plug provided. • Ambient Temperature: -30 °C up to +55 °C
• Latch assembly and elastomer gasket seals against water and (-22 °F up to 122 °F/ +131 °F) (standard) and -20°C up to
dust ingress, IP66. +50 °C (-4 °F up to 122 °F) (emergency)
• Easily accessed for maintenance using Allen key or straight • EU Declaration of Conformity: 50317
blade screwdriver. • ATEX Certificate: LCIE 16 ATEX 3048X
• Central opening with unique patented release system to prevent • IECEx Certificate: IECEx LCIE 16.0038X
damage. • Index of Protection according EN/IEC 60529: IP66
• Can be horizontally or vertically mounted. • Impact Resistance (shock): IK10
• Positive safety switch disconnects power to LED’s and driver to • Photobiological Safety, IEC 62778 and IEC 62471: RG0
allow maintenance in hazardous locations.
• Available in 3 hour emergency version, including built-in monthly
self- test. Test results through multi-colored LED.
• Ex e battery with plug-in connector.
Options
• 3 Hours Emergency/Battery Back-Up available ;
— Add suffix -E to the end of the catalog number.
Example: FELED5CBDSADE
ATEX/IECEx:
Zone 1 and 2 - 21 and 22
II 2 GD
IP66 – IK10
Order using catalog numbering guide below or select catalog number from tables on following pages.
FELED 3 C BD S A D
Lumen
Line Current Amps Input Power Output Color Temp Length in Weight in
(50/60 Hz) Power Factor (Lumens) Efficacy CRI (CCT) m (ft) kg (lbs) Catalog Number
FELED3CBDSAD
0.28A @ 100V
FELED3CBDSND
2850 105 lm/w >70 5000K
FELED3CBDLAD
0.13A @ 240V
0.8 6.0 FELED3CBDLND
27W >0.95
(2.6) (13.2) FELED3NBDSAD
0.28A @ 100V
FELED3NBDSND
2500 95 lm/w >80 4000K
FELED3NBDLAD
0.13A @ 240V
FELED3NBDLND
FELED4CBDSAD
0.32A @ 100V
FELED4CBDSND
3600 114 lm/w >70 5000K
FELED4CBDLAD
0.15A @ 240V
0.8 6.0 FELED4CBDLND
32W >0.95
(2.6) (13.2) FELED4NBDSAD
0.32A @ 100V
FELED4NBDSND
3200 101 lm/w >80 4000K
FELED4NBDLAD
0.15A @ 240V
FELED4NBDLND
FELED5CBDSAD
0.39A @ 100V
FELED5CBDSND
4650 122 lm/w >70 5000K
FELED5CBDLAD
0.16A @ 240V
1.4 9.0 FELED5CBDLND
38W >0.95
(4.6) (19.8) FELED5NBDSAD
0.39A @ 100V
FELED5NBDSND
4150 110 lm/w >80 4000K
FELED5NBDLAD
0.16A @ 240V
FELED5NBDLND
FELED7CBDSAD
0.63A @ 100V
FELED7CBDSND
7050 111 lm/w >70 5000K
FELED7CBDLAD
0.30A @ 240V
1.4 11.0 FELED7CBDLND
63W >0.95
(4.6) (24.3) FELED7NBDSAD
0.63A @ 100V
FELED7NBDSND
6550 103 lm/w >80 4000K
FELED7NBDLAD
0.30A @ 240V
FELED7NBDLND
ATEX/IECEx:
Zone 1 and 2 - 21 and 22
II 2 GD
IP66 – IK10
Technical Data
Gas Dust
T Rating Surface T°
Position
Model Horizontal/ Ta= +40 °C Ta= +50 °C Ta= +55 °C Ta= +40 °C Ta= +50 °C Ta= +55 °C
Type Vertical (+104 °F) (+122 °F) (+131 °F) (+104 °F) (+122 °F) (+131 °F)
FELED3 70°C 80 °C 85 °C
T6 T6 T5
Standard
(158 °F) (176 °F) (185 °F)
FELED4 64 °C 74 °C 79 °C
T6 T6 T6
Standard
(147 °F) (165 °F) (174 °F)
FELED5 63 °C 73 °C 78 °C
T6 T6 T6
Standard
(145 °F) (163 °F) (172 °F)
FELED5 63 °C 73 °C
T6 T6 — —
Emergency
(145 °F) (163 °F)
FELED7 65 °C 75 °C 80 °C
T6 T6 T6
Standard
(149 °F) (167 °F) (176 °F)
Ambient Temperature
Conduit/Cable Entries Voltage °C (°F) T Rating Catalog Number
Standard 3K Lumens - 0.80 m (2.6ft)
M20 Standard FELED3CBDSAD
M25 Standard -30 up to +55 FELED3CBDSND
100/240 Vac, 50/60 Hz T5 @ 55°C
M20 Dual Loop In/Loop Out (-22 up to +131) FELED3CBDLAD
M25 Dual Loop In/Loop Out FELED3CBDLND
M20 Standard FELED3NBDSAD
M25 Standard -30 up to +55 FELED3NBDSND
100/240 Vac, 50/60 Hz T5 @ 55°C
M20 Dual Loop In/Loop Out (-22 up to +131) FELED3NBDLAD
M25 Dual Loop In/Loop Out FELED3NBDLND
Standard 4K Lumens - 0.80 m (2.6ft)
M20 Standard FELED4CBDSAD
M25 Standard -30 to +55 FELED4CBDSND
100/240 Vac, 50/60 Hz T6 @ 55°C
M20 Dual Loop In/Loop Out (-22 to +131 ) FELED4CBDLAD
M25 Dual Loop In/Loop Out FELED4CBDLND
M20 Standard FELED4NBDSAD
M25 Standard -30 to +55 FELED4NBDSND
100/240 Vac, 50/60 Hz T6 @ 55°C
M20 Dual Loop In/Loop Out (-22 to +131) FELED4NBDLAD
M25 Dual Loop In/Loop Out FELED4NBDLND
Standard 5K Lumens - 1.40 m (4.6ft)
M20 Standard FELED5CBDSAD
M25 Standard -30 up to +55 FELED5CBDSND
100/240 Vac, 50/60 Hz T6 @ 55°C
M20 Dual Loop In/Loop Out (-22 up to +131) FELED5CBDLAD
M25 Dual Loop In/Loop Out FELED5CBDLND
M20 Standard FELED5NBDSAD
M25 Standard -30 up to +55 FELED5NBDSND
100/240 Vac, 50/60 Hz T6 @ 55°C
M20 Dual Loop In/Loop Out (-22 up to +131) FELED5NBDLAD
M25 Dual Loop In/Loop Out FELED5NBDLND
Standard 7K Lumens - 1.40 m (4.6ft)
M20 Standard FELED7CBDSAD
M25 Standard -30 to +55 FELED7CBDSND
100/240 Vac, 50/60 Hz T6 @ 55°C
M20 Dual Loop In/Loop Out (-22 to +131) FELED7CBDLAD
M25 Dual Loop In/Loop Out FELED7CBDLND
M20 Standard FELED7NBDSAD
M25 Standard -30 to +55 FELED7NBDSND
100/240 Vac, 50/60 Hz T6 @ 55°C
M20 Dual Loop In/Loop Out (-22 to +131) FELED7NBDLAD
M25 Dual Loop In/Loop Out FELED7NBDLND
Emergency 5K Lumens - 1.40 m (4.6ft)
M20 Standard FELED5CBDSADE
M25 Standard -20 up to +50 FELED5CBDSNDE
100/240 Vac, 50/60 Hz T6 @ 50°C
M20 Dual Loop In/Loop Out (-4 up to +122) FELED5CBDLADE
M25 Dual Loop In/Loop Out FELED5CBDLNDE
M20 Standard FELED5NBDSADE
M25 Standard -20 up to +50 FELED5NBDSNDE
100/240 Vac, 50/60 Hz T6 @ 50°C
M20 Dual Loop In/Loop Out (-4 up to +122) FELED5NBDLADE
M25 Dual Loop In/Loop Out FELED5NBDLNDE
M20 entries are with brass earth continuity plate for armored cable. Must order armored cable glands separately. M25 entries are for non-armored cable. Cable
glands provided with luminaires with M25 unarmored hub entries.
Standard cable entry provides 3 entries; 1 at one and 2 at the other end of the housing.
Loop In/Loop Out through cable entry provides 3 entries; 1 at one and 2 at the other end of the housing.
ATEX/IECEx:
Zone 1 and 2 - 21 and 22
II 2 GD
IP66 – IK10
Wiring Diagrams
Standard
Version
Version
:L :L Version
Version
:S:S
DualDual
LoopLoop
In/Out
In/Out
- Through
- Through
Wiring
Wiring
(Single
(Single
Phase)
Phase) Standard
Standard
(Single
(Single
Phase)
Phase)
3 entries,
3 entries,
1 at1one
at one
endend
andand
2 at2the
at the
other
other 3 entries,
3 entries,
1 at1one
at one
endend
andand
2 at2the
at the
other
other
PE
PE
PE
PE
PE
PE
N
LN
N
N
N
N
PE
PE
PE
PE
L
LL
L
L
N
N
N
N
LL
L
Emergency
L
Version : L Version : L Version : S Version : S
PE
PE
PE
PE
PE
PE
PE
PE
PE
L’
L’
L’
L’
N
N
N
N
L
L
L
L
L’
L’
N
LN
N
L’
L’
L’
L’
N
LN
L
L
L
Lighting ON
Switch
L’
OFF
L
Standard LED
N Lighting Fixture
PE
L’
L Emergency LED
N Lighting Fixture
PE
LED Status
Color Indication Function
LED Blinking Mains voltage available – Battery charging
Green
LED Continuous Mains voltage available – Battery connected and loaded
Green and Red LED Blinking Alternately (2s) Mains voltage available – Battery in repair mode
LED Blinking Mains voltage available – No battery connected OR defective
Mains voltage NOT available — Light unit powered by batteries
LED Continuous
Red (emergency mode)
Mains voltage NOT available — Battery low (emergency mode com-
LED Flashing
pleted)
Yellow (Orange) and another Mains voltage available— Last automatic or manual operational check
LED Blinking Alternately
color has been unsuccessful
None (Off) No Light Emitted Mains voltage NOT available — Battery completely empty
Self-Test: In 3 month intervals batteries are automatically discharged and recharged once.
5K 7 Ah – 6V 3 hours 25%
ATEX/IECEx:
Zone 1 and 2 - 21 and 22
II 2 GD
IP66 – IK10
Set of two
M8 Ring Bolts
Set of two
Replacement Lens
0.79 m (2.6 ft) clear polycarbonate external lens with gasket Z00650
1.39 m (4.6 ft) clear polycarbonate external lens with gasket Z00651
Replacement Diffuser
0.79 m (2.6 ft) diffused internal lens for FELED3 and FELED4 Models FELED2DPL
1.39 m (4.6 ft) diffused internal lens for FELED5 and FELED7 Models FELED4DPL
ATEX/IECEx:
Zone 1 and 2 - 21 and 22
II 2 GD
IP66 – IK10
9.0 mm
(0.35")
64 mm
(2.52")
9.0 mm
(0.16")
30 mm
(1.18")
8.5 mm
(0.33")
8.5
25.0 mm (0.98")
49.0 mm (1.93")
FESBS: 316 stainless steel — Set of two brackets for surface mounting
232 mm (9.13")
200 mm (7.87")
38.0 mm
(1.50")
13.0 mm
(0.51")
32.0 mm
(1.26")
9.5 mm
(0.37")
9.5
14.5
14.5mm (0.57")
20.0 mm
(0.79")
8.0 mm
(0.31")
15.0 mm 36.0 mm
(0.59") (1.42")
M8x31.8 mm
M 8(1.25")
x 1.25
75.0 mm
(2.95”)
14.0 mm
(0.55”) or 84 for 50.8 mm (2.00")
31.8 mm (1.25")
or 38.1 mm (1.50")
m
m )
60 6”
85 mm Ø (2.3
(3.31”)
14.0 mm
(0.55”) 50.8 mm
(2.00")
FEHBA: aluminum or FEHBS: 316 stainless steel — Set of two hinged brackets for adjusting luminaire.
32.0 mm
5.5 mm (1.26”)
(0.22”)
82 18.0 mm
.
(3. 0 m
(3. 0 mm
23 m (0.71”)
”)
”)
03
.
77
132 mm (5.20”)
30°
100.0 mm
60
30
90
(3.94”)
14.5 mm
0
30
60
(0.57”)
90
30°
M8x31.8 mm
(1.25")
41.0 mm 13.0 mm 9.5 mm
(1.61”) (0.51”) (0.37”)
ATEX/IECEx:
Zone 1 and 2 - 21 and 22
II 2 GD
IP66 – IK10
145.0 mm
(5.71")
217.0 mm
(8.54")
End View
400.0 mm 2 X M8
(15.75")
785.0 mm (30.91")
2 X M8
700.0 mm (27.56")
1390.0 mm (54.72")
ATEX/IECEx:
Zone 1 and 2 - 21 and 22
II 2 GD
IP66 – IK10
ATEX/IECEx:
Zone 1 and 2 - 21 and 22
II 2 GD
IP66 – IK10