What is a cluster a definition!

A cluster is a group of computers, called nodes that function as a single computer/system to provide high availability and high fault tolerance for applications or services. Windows 2003 Servers can participate in a cluster configuration through the use of Cluster Services. If one member of the cluster (the node) is unavailable, the other computers carry the load so that applications or services are always (with a small interruption) available. All nodes of the cluster use a Shared Disk an external disk or disk subsystem which is accessible for all nodes through SCSI (2 Nodes) or Fibre Channel (more than 2 nodes). All data will be stored on the shared disk or an external disk subsystem (for example Exchange databases). Every node has a local Exchange 2003 installation with a unique configuration for every cluster node. Each Cluster with Exchange 2003 has at a minimum one Exchange Virtual Server (EVS). An EVS is the logical node that will be used for all cluster operations. An EVS contains an IP address, network name, physical disk and an application. A cluster can be

Active/Active or Active/Passive

Microsoft recommends only Active/Passive clusters I will give you the reason later. The number of cluster nodes supported by Windows 2003 Enterprise and Datacenter is 8 nodes. Windows Server 2003 Standard and Web Editon doesnt support a Cluster. In an Active/Passive cluster - If one node in the cluster fails, the active cluster failover to another node which becomes Active. This is called Failover. If the failed node is back online, a Failback can be manually initiated or automatically configured in the Cluster Group properties. Every cluster node must have two network interfaces. One network interface for the cluster communication called the private LAN and one network interface called the public LAN. You can link a cluster with two nodes with a simple cross link cable. If more than two nodes exist in the cluster you have to use a dedicated switch / hub. The private NIC is used for the Heartbeat communication (Cluster communication). A Heartbeat is much like a ping which can be used to test if the other cluster node is still available. If the heartbeat fails, the Failover process occurs.

Clustering changes with Exchange 2003 SP1

In versions before Exchange 2003 SP1, regardless of the number of cluster nodes you could only have one instance of a Public Folder store that is associated with the MAPI folder tree. In Exchange 2003 SP1, the Exchange development team added the ability to have multiple MAPI Public Folder databases on a single multi node cluster. This support was added because the Exchange team saw that Outlook 2003 cached mode puts a greater load on Public Folders like the Outlook Address Book (the OAB will be loaded offline at the client). With the help of multiple Public Folder stores the load can be spread across these folders. This allows a better client performance.

Why Active/Active cluster is not recommended

Active / Active cluster is not recommended because of Virtual memory (VM) fragmentation. When two instances of the information store is running in one memory space, it might be possible that sufficient VM does not exist to bring the resource online during a failover/failback. For more information see here: http://support.microsoft.com/default.aspx?scid=kb;EN-US;816893 There are three main concepts which reduce virtual memory fragmentation:

Decrease the number of dynamic allocations when the system is started Increase the size of the virtual address space Allocate similar size allocations from common regions of memory

Exchange Server 2003 Cluster Requirements

Microsoft Windows 2000 Advanced Server (up to two nodes) Windows 2000 Datacenter Server (up to four nodes) Windows 2000 must have SP3 + 329938 hotfix or SP4 Windows Server 2003, Enterprise Edition (up to eight cluster nodes) Windows Server 2003, Datacenter Edition (up to eight cluster nodes) Hardware on cluster HCL Windows 2000 - Check lists for cluster service installation http://go.microsoft.com/fwlink/?LinkId=266 Windows Server 2003 http://go.microsoft.com/fwlink/?LinkId=17219 Microsoft Distributed Transaction Coordinator (MSDTC) installed

Exchange Server 2003 Cluster Setup Changes

Block removal of node if an EVS is running on the cluster The /disasterrecovery switched is blocked Prevent Exchange 2003 from being first non-legacy server in a Exchange 5.5 site By default, POP3 and IMAP4 resource not created (as part of the Trustworthy Computing initiative from Microsoft) Cluster service account doesnt requires Exchange full admin rights IPSEC is now supported between front-end servers and back-end clusters

Exchange Server 2003 Cluster Disk Changes

Windows 2003 clusters now support Volume Mount points to overcome the limits of traditional drive letter assignments. This new feature is very useful for four and eight node Exchange clusters because the traditional drive letter assignment in Exchange was very limited in cluster environments when multiple storage groups and stores where used.

Windows 2003 Cluster Setup

I will not explain every step for installing a Windows 2003 Cluster. For detailed information click the following link. I will show you only a few pictures.

Figure 1: Create a new Cluster The Windows 2003 Cluster administrator after successful installation.

Figure 2: Cluster Administrator

Exchange 2003 Cluster Setup

Before we install Exchange 2003, we must create a MS-DTC (Distribution Transaction Coordinator) resource. In Windows 2003, Microsoft recommends installing the DTC as a separate Cluster Group containing a Physical Disk, Network Name and IP address resource and then adding the MSDTC resource to the cluster group. For more in formation how to setup the MS-DTC in a Windows 2003 Cluster, read the following Knowledge Base article.

The second step is to install Exchange 2003 and all required hotfixes on each node. You MUST install Exchange one after the other. After installing Exchange, you can deploy Exchange 2003 SP1 on every cluster node. For more information on how to deploy Exchange 2003 SP1 into a cluster environment read the following article. Once the Exchange 2003 binaries have been installed on the cluster Node we can now create an Exchange Virtual Server. The Exchange Virtual Server creation process is much the same as for Exchange 2003. First we need to create a cluster group for the Exchange Virtual Server. The group must have at least one physical disk resource, at least one IP address resource, and a network name resource. The network name resource must have a dependency on the IP address resources in the cluster group. When all resources are online, we must create the System Attendant resource. The System Attendant Resource (SA) creates all the other Exchange 2003 cluster resources automatically. To do this, right click the Exchange 2003 cluster group and choose New Resource and then choose the Microsoft Exchange System Attendant. You must name the SA.

Figure 3: Exchange System Attendant Add the Nodes that will be possible owners of the System Attendant Resource. A possible owner is a node in the cluster on which the resource can be brought online. These Nodes will also be added as a possible owner of all the other Exchange resources that are automatically created. A Node must be specified as a possible owner of a resource in order for us to failover to that Node.

Figure 4: Possible owners of the EVS

You must set the dependencies on the System Attendant Resource. The dependencies are the following:

Network Name resource All disk resources (that Exchange 2003 should use - this includes Mount Point disks which will contain Exchange 2003 data)

Figure 5: SA Resource dependencies Like a normal Exchange installation you must select the administrative group where the Exchange virtual server is created.

Figure 6: Chose the administrative Group for the EVS Within the chosen Administrative Group you now have to choose a Routing Group where the Exchange Virtual Server will be located when more than one Routing Group exists at the time of EVS creation. You can change the server location in the Routing Group after installation.

Figure 7: Select the routing group for the EVS Please read the wizard's summary carefully.

Figure 8: Exchange 2003 Wizard summary Click Finish to start the creation process. This may take a while because the setup process actually creates all Exchange 2003 cluster resources. When the process is complete you will see the following message:

Figure 9: DONE The following picture shows the Cluster Administrator tool after EVS installation. Note that all Exchange resources are NOT online.

Figure 10: Cluster Administrator after EVS installation Exchange 2003 no longer creates a POP3 and IMAP cluster resource. This is part of Microsoft's Trustworthy initiative and it is also true for a normal Exchange 2003 installation. Next, we have to bring the System Attendant resource online. To do so, right click the EVS System Attendant and click Bring Online.

Figure 11: You have to bring the System Attendant Online.

Exchange 2003 Resource dependencies

Microsoft has changed the Exchange 2003 resource dependencies to allow a faster failover/failback. In Exchange 2000 there are the following dependencies: IP Address > Network Name > System Attendant Physical Disk > System Attendant Routing Engine > System Attendant Information Store > System Attendant MTA > System Attendant MS Search > Information Store POP3 > Information Store SMTP > Information Store IMAP4 > Information Store Beginning with Exchange 2003 Microsoft has changed the Resource dependencies: IP Address > Network Name > System Attendant Physical Disk > System Attendant Routing Engine > System Attendant Information Store > System Attendant MTA > System Attendant MS Search > System Attendant POP3 > System Attendant SMTP > System Attendant IMAP4 > System Attendant

Kerberos support
Beginning with Windows 2000 SP3 Kerberos authentication against clustered virtual servers was added. Before Windows 2000 SP3, all authentications against clustered virtual servers were NTLM or NTLMv2. Before Windows 2000 SP3, a clustered virtual server did not have a corresponding Active Directory computer object. Exchange 2003 now supports Kerberos authentication. This is done automatically by the setup process for non-clustered servers. In a cluster environment, these properties are set during the creation of the Exchange virtual server (EVS). This means that a computer object exists in Active Directory for each virtual Exchange server.

Conclusion
It is relatively easy to deploy a Windows 2003 cluster with Exchange 2003. Microsoft has made many extensions and enhancements in Windows 2003 and Exchange 2003 to ease the Cluster Administrators life. Dont forget to pay attention for the rest of your cluster environment. A comprehensive Cluster solution should deal with certified hardware (at a minimum have a look in the HCL), cluster aware applications and 24/7 support and defined SLAs (Service Level Agreements). It is important to ensure that the infrastructure also supports High Availability. This means that you should have redundant networking equipments (Routers, Switches), USV support and much more.

Related Links Cluster Configuration Checklist from IT Showcase for Exchange 2003 http://www.microsoft.com/downloads/details.aspx?FamilyId=0E9B809D-2A7A-4ADF-9FDE897210A461DB&displaylang=en Windows Server 2003 Clustering Services Technology Center http://www.microsoft.com/windowsserver2003/technologies/clustering/default.mspx Guide to Creating and Configuring a Server Cluster under Windows Server 2003 http://www.microsoft.com/technet/prodtechnol/windowsserver2003/technologies/clustering/confclus.mspx Windows Clustering is not supported on front-end servers in Exchange Server 2003 http://support.microsoft.com/default.aspx?scid=kb;en-us;837852 High Availability Guide for Exchange 2003 http://www.microsoft.com/technet/prodtechnol/exchange/2003/library/highavailgde.mspx Server Consolidation with Exchange 2003 http://www.microsoft.com/downloads/details.aspx?FamilyId=BC3A8D76-FC58-4E3C-91521CE35E9466EA&displaylang=en How to install Exchange Server 2003 Service Pack 1 in a clustered Exchange environment http://support.microsoft.com/default.aspx?scid=kb;en-us;867624 Support WebCast: Clustering Microsoft Exchange Server 2003 http://support.microsoft.com/default.aspx?scid=kb;en-us;823894 Considerations when deploying Exchange on an Active/Active cluster http://support.microsoft.com/default.aspx?scid=kb;en-us;815180 http://support.microsoft.com/default.aspx?scid=kb;en-us;301600 How to configure Microsoft Distributed Transaction Coordinator on a Windows Server 2003 cluster http://support.microsoft.com/default.aspx?scid=kb;en-us;301600 Exchange Server 2003 and Exchange 2000 Server require NetBIOS name resolution for full functionality http://support.microsoft.com/default.aspx?scid=kb;en-us;837391 Security Setting Changes and Updates That Are Introduced in Exchange Server 2003 http://support.microsoft.com/default.aspx?scid=kb;en-us;824111 Deploying Exchange 2003 SP1 in a cluster environment http://support.microsoft.com/default.aspx?scid=kb;en-us;867624