QUOTATION

QUOTATION FOR :
CLIENT : Mr. Nmuhammed ali
PLACE : Kottakkal (Malappuram)
PROJECT : Home
SCOPE : Interior furnishing
QTN REF : APT/MPM/Q/202227/R0
DATE : 15.03.2022

GROUND FLOOR
SL NO ITEM & MATERIAL FINISH FITTINGS UNIT QTY RATE AMOUNT
1.00 PRELIMINARIES -
3D DESIGNING / 2D LAYOUTS /
ELECTRICAL COODINATION DRAWINGS :
Preparing & submitting 3D real view Free of
1.01 Nill Nill Ls 1.00 -
designs, 2D layouts, Electrical cost
coordination drawings for lighting &
powerpoints.

2.00 SIT OUT -

GYPSUM CEILING (1.5 FEET WIDE) : with
12mm thk gypsum board and channels
(Section/Inter/L-Angles).Taping and joint
2.01 white emulsion Nill Sqft 219.84 75.00 16,488.00
componds on every board joints.
(considerd 60Cm wide light coves all
around)
PAINTING ON CEILING : Putty + Primer +
2.02 white emulsion Nill Sqft 219.84 25.00 5,496.00
White emulsion paint 2 coat.

3.00 FORMAL LIVING -

TEAPOY (90 x 50 x 45) : with 18mm 710

BWP Marine plywood & 1mm Laminate
Glossy finish + wooden +
3.01 on both side with 2mm edge bands on Black tinted glass Nos 1.00 9,950.00 9,950.00
Black glass top
doors + 0.8mm on panels,and 8mm
black tinted glass top.

LCD UNIT (200 x 160 x 40) : with 18mm

710 BWP Marine plywood & 9mm Ebco Autoclose hinges
3.02 multiwood back panel,1mm Laminate on Glossy finish + wooden 95degree/ slider 350mm / Nos 1.00 22,700.00 22,700.00
both side with 2mm edge bands on profile handle
doors + 0.8mm on panels.
SOFA CUSTOM-MADE - MATCHING
WITH INTERIOR COLOUR THEME (4
3.03 Leather Nill Nos 1.00 21,700.00 21,700.00
SEATER) : with solid wood frame,foam
and artificial leather.
GYPSUM CEILING (60 WIDE) : with
12mm thk gypsum board and channels
(Section/Inter/L-Angles).Taping and joint
3.04 white emulsion Nill Sqft 133.69 72.00 9,625.68
componds on every board joints.
(considerd 60Cm wide light coves all
around)
PAINTING ON CEILING : Putty + Primer +
3.05 white emulsion Nill Sqft 133.69 25.00 3,342.25
White emulsion paint 2 coat.

4.00 DINING -
DINING TABLE + CHAIRS (6 SEATER) :
Polished teak + Black tinted 10mm Black tinted glass
4.01 with soilid teak wood and 10mm black Nos 1.00 35,700.00 35,700.00
glass top top
tinted glass top.
 WASH COUNTER (90 x 60 x 50) : with Ebco Autoclose hinges
18mm 710 BWP Marine plywood & 95degree/ slider
4.02 9mm multiwood back panel,1mm Glossy finish + wooden 350mm/4mm thk mirror Nos 1.00 17,500.00 17,500.00
Laminate on both side with 2mm edge with edge polish / profile
bands on doors + 0.8mm on panels. handle
MARBLE TOP (50 WIDE) : with 15mm
4.03 thk Nano white/Black galaxy top with Glossy finish Nill Sqft 4.84 475.00 2,300.81
edge polish.
CROCKERY UNIT (1.20 x 160 x 40) : with Ebco Autoclose hinges
18mm HDF HMR prelaminated & 9mm 95degree/ slider
4.04 multiwood back panel, both sides with Glossy finish + wooden 350mm/4mm thk clear Nos 1.00 22,800.00 22,800.00
2mm edge bands on doors + 0.8mm on glass panels / Profile
panels. handle
GYPSUM CEILING : with 12mm thk
gypsum board and channels
(Section/Inter/L-Angles).Taping and joint
4.05 white emulsion Nill Sqft 219.84 75.00 16,488.00
componds on every board joints.
(considerd 60Cm wide light coves all
around)
PAINTING ON CEILING : Putty + Primer +
4.06 white emulsion Nill Sqft 219.84 25.00 5,496.00
White emulsion paint 2 coat.

5.00 MODERN KITCHEN -

BASE UNIT (450 X 60 X 85) : with 18mm

710 BWP Marine plywood & 9mm Ebco Autoclose hinges 95
5.01 multiwood back panel,1mm Laminate on Glossy finish + wooden degree/ slider 350mm / All Nos 1.00 73,950.00 73,950.00
both side with 2mm edge bands on accessories
doors + 0.8mm on panels.
MARBLE TOP (60 WIDE) : with 15mm
5.02 thk Nano white/Black galaxy top with Glossy finish Nill Sqft 29.06 475.00 13,803.50
edge polish.
OVERHEADS UNIT (375 x 60 x 40 -25.83
Sqft ) : with 18mm 710 BWP Marine
Ebco Autoclose hinges
plywood & 9mm multiwood back
5.03 Glossy finish + wooden 95degree/ slider Nos 1.00 36,200.00 36,200.00
panel,1mm Laminate on both side with
350mm/Prolift / Clear glass
2mm edge bands on doors + 0.8mm on
panels.
6.00 FIRE KITCHEN -

BASE UNIT ( 500 x 60 x 85) : with 18mm

710 BWP Marine plywood & 9mm Ebco Autoclose hinges 95
6.01 multiwood back panel,1mm Laminate on Glossy finish + wooden degree/ slider 350mm / All Nos 1.00 79,950.00 79,950.00
both side with 2mm edge bands on accessories
doors + 0.8mm on panels.
MARBLE TOP (60 WIDE) : with 15mm
6.02 thk Nano white/Black galaxy top with Glossy finish Nill Sqft 25.83 475.00 12,270.96
edge polish.
OVERHEADS UNIT (400 x 40 x 60 -20.02
Sqft ) : with 18mm 710 BWP Marine
Ebco Autoclose hinges
plywood & 9mm multiwood back
6.03 Glossy finish + wooden 95degree/ slider Nos 1.00 39,950.00 39,950.00
panel,1mm Laminate on both side with
350mm/Prolift / Clear glass
2mm edge bands on doors + 0.8mm on
panels.
7.00 HOOD & HOB -

HOOD : Supply and installation of hood

7.01 Nill Nos 1.00 19,700.00 19,700.00
with 60cm, Suction 1100 m3/hr.

HOB : Supply and installation of Hob

7.02 Nill Nos 1.00 17,750.00 17,750.00
3Burner.
 8.00 KITCHEN ACCESSORIES -

CUTLARY TRAY : Supply and installation

8.01 Ebco slider 350mm Nos 1.00 5,200.00 5,200.00
of cutlary tray.

CUP & SAUS INLETS : Supply and

8.02 Ebco slider 350mm Nos 1.00 4,450.00 4,450.00
installation of cup & saus inlets.

PLATES INLET : Supply and installation of

8.03 Ebco slider 350mm Nos 1.00 4,750.00 4,750.00
plates inlets.

OIL PULL OUT : Supply and installation

8.04 Ebco slider 350mm Nos 1.00 3,750.00 3,750.00
of oil pullout.

DETERGENT HOLDER : Supply and

8.05 Required clambs Nos 1.00 1,950.00 1,950.00
installation of detergent holder.

SHUTTER WASTE BIN : Supply and

8.06 Brackets Nos 1.00 1,750.00 1,750.00
installation of shutter waste bin.

9.00 BEDROOM - 1 (MASTER) -

COT (KING SIZE) + HEAD BOARD : with
18mm 710 BWP Marine plywood & Ebco slider 350mm / profile
9.01 Glossy finish + wooden Nos 1.00 38,750.00 38,750.00
1mm Laminate on both side with 0.8mm handle
on panels.
BED SIDE UNITS (45 x 40 x 40) : with
18mm HDF HMR prelaminated & 9mm
9.02 Glossy finish + wooden Ebco slider 350mm Nos 1.00 6,950.00 6,950.00
multiwood back panel, with 2mm edge
bands on doors + 0.8mm on panels

WARDROBE 3DOOR (125 x 220 x 40) :

Ebco Autoclose hinges
with 18mm HDF HMR prelaminated &
9.03 Glossy finish + wooden 95degree / slider 350mm / Nos 1.00 41,950.00 41,950.00
9mm multiwood back panel, with 2mm
hanger rod / profile handle
edge bands on doors + 0.8mm on panels

DRESSING UNIT (90 x 120 x 40) : with Ebco Autoclose hinges

18mm HDF HMR prelaminated & 9mm 95degree/ slider 350mm /
9.04 Glossy finish + wooden Nos 1.00 9,950.00 9,950.00
multiwood back panel, with 2mm edge 4mm thk mirror with edge
bands on doors + 0.8mm on panels polish

10.00 BEDROOM - 2 -
COT (QUEEN SIZE) + HEAD BOARD : with
18mm 710 BWP Marine plywood & Ebco slider 350mm / profile
10.01 Glossy finish + wooden Nos 1.00 32,500.00 32,500.00
1mm Laminate on both side with 0.8mm handle
on panels.
BED SIDE UNITS (45 x 40 x 40) : with
18mm HDF HMR prelaminated & 9mm
10.02 Glossy finish + wooden Ebco slider 350mm Nos 1.00 6,950.00 6,950.00
multiwood back panel, with 2mm edge
bands on doors + 0.8mm on panels

WARDROBE 3DOOR (125 x 220 x 40) :

Ebco Autoclose hinges
with 18mm HDF HMR prelaminated &
10.03 Glossy finish + wooden 95degree / slider 350mm / Nos 1.00 41,950.00 41,950.00
9mm multiwood back panel, with 2mm
hanger rod / profile handle
edge bands on doors + 0.8mm on panels
 STUDY TABLE + STORAGE (100 x 60 x
75) : with 18mm HDF HMR prelaminated
Ebco Autoclose hinges
10.04 & 9mm multiwood back panel, with Glossy finish + wooden Nos 1.00 14,950.00 14,950.00
95degree/ slider 350mm
2mm edge bands on doors + 0.8mm on
panels.
11.00 OTHERS -

STAIR HANDRAILS : with SS polished SS polished handrails /

11.01 handrails & 8mm toughened clear glass 8mm clear toughened clear RM 1.00 5,950.00 Rate only
panels. glass panels

11.02 WINDOW ZEBRA BLINDS White + wood Curtain pelmet Sqft 1.00 125.00 Rate only
Total 698,961.20
Total (After discount) 698,000.00
Six lakh ninetyeight thousand rupees only/-
TERMS & CONDITIONS

All joinery items are factory made & assembling , installation at site

Will provide 3d designs + drawings according to given quote after order confirmation

Payments : 50% Advance + 2 progress payments + final payment at completion

Payments : 15% At order confirmation + 25% At materilas procuring + 25% At factory finished materials delivery + 30% At 75% of works completion + 5% at completion

Electricity, water & storage facilities required at site

Any additional works will be charged accordingly

In some cases material brands may change according to the availability & stock

This quotation valid up to one month

SL NO MATERIAL BRAND LOGO

1.00 PLYWOOD AFYUN/MATTEX/KANWOOD

FINEWUD/GRATIS/SUPERBOA
2.00 MULTIWOOD
RD

GREEN PANEL/ACTION
3.00 HDF (HMR)
TESA/CENTURY

MERINO/CENTURY/GREENLA
4.00 LAMINATE
M

5.00 GYPSUM BOARD GYPROC/USG/GYPELITE

6.00 PAINT ASIAN /BERGER/INDIGO

HETTICH/EBCO/SPIDER/SLEEK
7.00 HARDWARES
/KAFF/FABER

POLYCAB/GOLDMEDAL/LUKE
8.00 ELECTRICAL
R/ELLYS

Prepared by
Priyadarsan (Quantity surveyor)
Mob : +91 6235183776
www.aptinteriorsandbuilders.com