Operating instructions /

Mounting instructions
Flow sensor UK

SF***A
06 / 2012
704181 / 02
 Before installation, read the safety-related section of the operating
instructions, enclosed separately!

1 Installation
The sensor tip must be completely immersed in the medium.
• In the case of horizontal pipes mount the unit from the side, if possible (fig. 1).
- When the unit is to be mounted at the bottom of the pipe, it should be free
from deposits.
- When the unit is to be mounted at the top of the pipe, it should be completely
filled with the medium to be monitored.
• In the case of vertical pipes mount the unit in a place where the medium flows
upwards (fig. 2).
1 A 2 A

B
B

A: mounting bush (15 mm for units with M12 x 1 and G¼ thread; 33 mm for units with G½
thread).
B: packing washer
To avoid malfunction a minimum 3
distance between the flow monitor and B
bends, valves or such like must be ob-
served (fig 3). Min. 5 x pipe diameter min.
upstream (A), min. 3 x pipe diameter 3xD
downstream (B).
min.
D 5xD

2
2 Ceramic units
Max. tightening torque: 8Nm for units with G¼ thread; 30Nm for units with G½
thread.
The thread of the mounting bush must be clean, undamaged and comply
with the standard (pipe thread to DIN ISO 228).
For sealing only use flat seals.

3 Flow sensor SF620A

1 2 3 4

► Screw the clamp adapter (2) onto the process fitting (1).
► Insert the flow sensor (4) into the adapter.
► Set the requested installation length.
► Tighten the nut (3) (follow the instructions included with the clamp adapter).
Recommended insertion depth of the sensor: 20 ... 30 mm in the pipe. Min.
12 mm, max. to mid pipe.
Note: The sensor tip must not touch the pipe wall.

3
4 Scale drawings
Category 1/2G
SF111A
55
13 27
12

8,2
M12x1
17
SF211A
55
13 27
12

8,2
G1 4
17
SF311A
75
15 45
12
8,2
G1 2

27

4
Category 2G / Cable
SF121A
55
13 27
12

7,7
M12x1
17 UK

SF221A
55
13 27
12

7,7
G1 4
17
SF321A
75
15 45
12
7,7
G1 2

27

5
Category 2G / Plug
SF120A
52
13 27
12

7,7
M12 x1

M12x1
17
SF220A
52
13 27
12

7,7
M12 x1

G1 4
17
SF320A 72
15 45
12
7,7
M12x1

G1 2

27

6
SF620A

M12x1
217
25 146 45

7,7
20 15

10
UK

Category 2G / Ceramic units

G1 4
8,6
17

SF323A 76,5
15 45
15,5
8,6
27

G1 2

15

7
Category 2G / ANSIB16.5 (1in; 300 lb/sq.in)
SF521A

124
19
51
89
197,5
173,5
157,6
156
32,5
24,5
12,5
10,5

18
10
7,7