Scribd
Upload
70 views

Practical Relative Velocity & Acceleration PDF

This document contains 5 problems related to analyzing velocity and acceleration in mechanisms using relative velocity and acceleration methods. Problem 1 involves finding the velocity and acceleration of a point on a connecting rod and the angular velocity and acceleration of the connecting rod. Problem 2 involves drawing a velocity and acceleration diagram and finding angular velocities and accelerations. Problem 3 involves finding velocities, angular velocities, linear accelerations, and angular accelerations in a mechanism with rotating cranks and sliding blocks. Problem 4 involves finding velocities, accelerations, and angular accelerations in a toggle mechanism with a rotating crank and sliding link. Problem 5 involves finding components of acceleration and angular accelerations given the velocity and acceleration of a sliding link in a two-link mechanism.

Uploaded by

Keshav Pagar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
70 views

Practical Relative Velocity & Acceleration PDF

This document contains 5 problems related to analyzing velocity and acceleration in mechanisms using relative velocity and acceleration methods. Problem 1 involves finding the velocity and acceleration of a point on a connecting rod and the angular velocity and acceleration of the connecting rod. Problem 2 involves drawing a velocity and acceleration diagram and finding angular velocities and accelerations. Problem 3 involves finding velocities, angular velocities, linear accelerations, and angular accelerations in a mechanism with rotating cranks and sliding blocks. Problem 4 involves finding velocities, accelerations, and angular accelerations in a toggle mechanism with a rotating crank and sliding link. Problem 5 involves finding components of acceleration and angular accelerations given the velocity and acceleration of a sliding link in a two-link mechanism.

Uploaded by

Keshav Pagar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

KOM

Practical No:
Title: - To solve two problems on velocity and acceleration analysis using relative
velocity and acceleration method.

1. An engine mechanism is shown in Fig. The crank CB = 100 mm and the


connecting rod BA = 300 mm with centre of gravity G, 100 mm from B. In the
position shown, the crankshaft has a speed of 75 rad/s and an angular acceleration
of 1200 rad/s2. Find:1. velocity of G and angular velocity of AB, and 2.
acceleration of G and angular acceleration of AB.

2. PQRS is a four bar chain with link PS fixed. The lengths of the links are PQ= 62.5
mm ; QR = 175 mm ; RS = 112.5 mm ; and PS = 200 mm. The crank PQ rotates at
10 rad/s clockwise. Draw the velocity and acceleration diagram when angle QPS =
60° and Q and R lie on the same side of PS. Find the angular velocity and angular
acceleration of links QR and RS.

3. In the mechanism, as shown in Fig. the crank OA rotates at 20 r.p.m. anticlockwise


and gives motion to the sliding blocks B and D. The dimensions of the various
links are OA = 300 mm; AB = 1200 mm; BC = 450 mm and CD = 450 mm. For
the given configuration, determine : 1. velocities of sliding at B and D, 2. Angular
velocity of CD, 3. linear acceleration of D, and 4. angular acceleration of CD.

Prof. Pagar K. R. Mechanical Department, GCOERC, Nashik Page 1


KOM

4. In the toggle mechanism shown in Fig., the slider D is constrained to move on a


horizontal path. The crank OA is rotating in the counter-clockwise direction at a
speed of 180 r.p.m. increasing at the rate of 50 rad/s2. The dimensions of the
various links are as follows: OA = 180 mm ; CB = 240 mm ; AB = 360 mm ; and
BD = 540 mm. For the given configuration, find 1. Velocity of slider D and
angular velocity of BD, and 2. Acceleration of slider D and angular acceleration of
BD.

5. In the mechanism shown in Fig, the slider C is moving to the right with a velocity
of 1 m/s and an acceleration of 2.5 m/s2. The dimensions of various links are AB =
3 m inclined at 45° with the vertical and BC = 1.5 m inclined at 45° with the
horizontal. Determine: 1. The magnitude of vertical and horizontal component of
the acceleration of the point B, and 2. the angular acceleration of the links AB and
BC.

Prof. Pagar K. R. Mechanical Department, GCOERC, Nashik Page 2

You might also like