Scribd
Upload
207 views2 pages

EL-04 Electrical Works CHK List

This document contains a checklist for inspecting electrical safety at a construction site. It lists various points to check regarding cables, distribution boards, RCBO/RCCB protection devices, earthing systems, and electrically operated machines. The checklist will be used by contractors and engineers to inspect these areas, ensure safety standards are met, and document any issues needing attention. Sign-off is required from contractors, engineers and CBRE staff to verify reviews and acceptance of the safety inspection.

Uploaded by

shamshad ahamed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
207 views2 pages

EL-04 Electrical Works CHK List

This document contains a checklist for inspecting electrical safety at a construction site. It lists various points to check regarding cables, distribution boards, RCBO/RCCB protection devices, earthing systems, and electrically operated machines. The checklist will be used by contractors and engineers to inspect these areas, ensure safety standards are met, and document any issues needing attention. Sign-off is required from contractors, engineers and CBRE staff to verify reviews and acceptance of the safety inspection.

Uploaded by

shamshad ahamed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

ROHAN BUILDERS (INDIA) PVT.

LTD ELECTRICAL SAFETY


JOINT INSPECTION CHECKLIST

Name of the project: Date & Time


Contractor Name :

Sl. No. Points YES/NO Remarks

CABLES
1 Whether the condition of Cable is checked?

2 Are Cables received from other site checked for


Insulation Resistance before putting them into
use?
3 Are all main Cables, taken either underground /
Overhead?
4 Are electrical Cables routed properly above the
over head
5 Are welding & Electrical Cables overlapping?
6 Is any improper jointing of Cables wires
prevailing at Site?

DBs / SDBs
1 Is earth conductor continued upto DB / SDB?

2 Whether DBs & extension boards are protected


from rain / water?
3 Is there any overloading of DBs / SDBs?

4 Are correct / proper fuses & CB’s provided at


main boards & sub- boards?
5 Is energised wiring in junction boxes, CB panels &
similar places covered all times?
6 Whether all DBs are with doors, lock & key
7 Whether all DBs kept on rubber mats

8 Whether all the DBs kept on dry and clean floor


9 Clear access and aggress available for all DBs.

10 Weather the location of DBs properly Identified

11 Weather all details of DB is available

Page 1 of 2
RBIPL/EHS/EI: 04 RV:00
Sl. No. Points YES/NO Remarks

RCBO / RCCB
1 Whether the connections are routed through
RCBO / RCCB?
2 Is RCBO/RCCB sensitivity maintained at 30 mA?
3 Are the RCBO/RCCB numbered & tested
periodically & test results recorded in a logbook
countersigned by competent person?

EARTHING
1 Is neutral earthing ensured at the source of
power (Main DB at Gen. or Transformer)?
2 Whether the continuity & tightness of earth
conductor are checked?
3 Mention the gauge of earth conductor used at
site.
4 Mention the value of Earth Resistance.

ELECTRICALLY OPERATED MACHINES /


ACCESSORIES
1 Whether the plug top provided everywhere?
2 Are all metal parts of electrical equipment’s &
light fittings / accessories grounded?
3 Is there any shed / cover for welding machines?
4 Are Halogen lamps fixed at proper places?
5 Are Portable power tools maintained as per
norms?
6 Any other Information / observations
Fire points, fire extinguishers and fire buckets

Signature-OHSE of contractor …………………..

Signature of Engineer in charge: ………………..

CBRE Reviewed and Accepted / Rejected

Signature Discipline Engineer/ Date/Time: ………………

Safety Manager/Date/Time: ……………………………….

Page 2 of 2
RBIPL/EHS/EI: 04 RV:00

You might also like