Scribd
Upload
22 views

Econo-Df1 PD

ECONO-DF1 is a food grade antifoam agent that is available as a creamy white liquid. It efficiently controls foam over a wide pH range in nonionic, cationic and anionic systems. ECONO-DF1 can be used as received or prediluted with water or other process liquids at concentrations ranging from 10-200ppm for foam control in most systems. It is readily dispersible in warm or cold water with gentle agitation for dilution and use.

Uploaded by

CHIRE SARAYASI MANUEL
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
22 views

Econo-Df1 PD

ECONO-DF1 is a food grade antifoam agent that is available as a creamy white liquid. It efficiently controls foam over a wide pH range in nonionic, cationic and anionic systems. ECONO-DF1 can be used as received or prediluted with water or other process liquids at concentrations ranging from 10-200ppm for foam control in most systems. It is readily dispersible in warm or cold water with gentle agitation for dilution and use.

Uploaded by

CHIRE SARAYASI MANUEL
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PRODUCT DATA SHEET

ECONO-DF1
Antifoam Agent

DESCRIPTION
ECONO-DF1 is a food grade emulsion formulated to control foam in both food and industrial
processes. This versatile defoamer is readily diluted with water or other process liquids for easy
addition to foaming solutions and maximum cost effectiveness. ECONO-DF1 efficiently
controls foam over a wide pH range in nonionic, cationic and anionic systems.

CHEMICAL & PHYSICAL PROPERTIES


Appearance Creamy, White Liquid
Specific Gravity 1.00
Flash Point >212oF
pH (1% aqueous solution) 4-5
Type of Emulsifier Non-ionic food grade
Viscosity @ 25oC (LVT, 12rpm) 700-1300cps

PROCESSING GUIDELINES
ECONO-DF1 can be used as received or prediluted with water or other process liquids before
use. Concentrations ranging from 10-200ppm are sufficient for foam control in most systems.
In testing to determine the most effective working concentration, a good starting point is to add
25ppm. The results at this concentration will indicate whether to increase or decrease the
amount.

DILUTING THE ANTIFOAM


ECONO-DF1 is readily dispersible in warm or cold water with gentle agitation. For best
results, mix one part of antifoam with 2-12 parts sterilized water or other diluant, and stir gently
until completely mixed. If it is necessary to store the diluted material, continuous mild agitation
is recommended to ensure a uniform product.

Please read and understand the Material Safety Data Sheet (MSDS) before using this product.
This information is provided with the best of our knowledge and belief. It is user’s responsibility to satisfy himself as to the suitability of such
information for his own particular use. However, no representation, warranty or guarantee is made as to its accuracy, reliability. We do not accept
liability for any loss or damage that may occur from the used of this information nor do we offer any warranty against any patent infringement.

P.O. Box 450246


Houston, TX 77245-0246
USA Toll free: (800) 231-2066
Phone: (713) 723-8416
Fax: (713) 723-1845
URL: www.EconomyPolymers.com
E-mail: [email protected]

You might also like