RÉSUMÉ Abdelatif Belmamoune

QUALIFICATIONS Well Integrity and Production technologist Specialist

Sep 1996 to Jul 2000: BS in Production & Drilling Engineering. Algerian Petroleum
Institute Iap-Boumerdes)

KEY COMPETENCIES
My experience in production engineering, Well interventions and well integrity encloses
the following:
 All Well Integrity Management related aspects, including writing of standards and
guidelines, designing investigations, repair suggestions and different monitoring
techniques.
 Design and implementing well integrity management system
 Preparation of workflows for Well Integrity Management Software System
 Preparation of workflows and processes for well integrity organization.
 Preparation of Well Failure Model
 Provision of training courses in Well Integrity Management
 Cement, Corrosion and leak detection evaluations.
 Technical evaluation for workover and Abandonment candidates.
 Evaluation and review post Abandonment.
 Well Integrity Interference testing design and interpretation.
 Inter-well tracer injection for well connectivity evaluation and single well tracer for
WAG injection performance evaluation.
 Operations support experience, which includes a detailed understanding of well
operations and production engineering
 Multilingual: Arabic, French and English.
PROFILE

Multilingual (Arabic, English, French) Lead / Senior / Well Integrity Specialist with over than 23 years’
international experience in Oil and Gas (O&G),. Dealth with major well integrity failures with deep root
cause analysis, involved in Well design, well design review to mitigate well integrity issues. Involved in
Aquifer Oil/Gas contaminations, Very Good experience in well integrity analysis preventing well
integrity major failures. Decision maker in relation to Well integrity failures and repair requirement,

KEY SKILLS
o High scale Well Inetgrity managmenet with capability to build Field well integrity system
from scratch for active and abandoned Wells :
 Well Failure model
 Well Integrity software
  Data Mapping
 Manual and procedures
 Lead and Coach well integrity team
 Monitroing strategy
 Downhole and surface testing
 Root cause analysis

o Well Desing and completion to enfource well Integrity capabilites and prevent failures.
o Underground Aquifers contamination prevention strategy.
o Very Good in Well Integrity and well data analysis
o Well failure predections analysis based on well paramters anomalies.
o Well Interventions, design, programing and supervision :
 Rigless operations procedures
 Downhole and surface testing and investigations
 Root cause analysis
 E-line / Slick line operations , Production and well integrity logging
 Coiled tubing operations
o Well Integrity Logging operations :
 Good knowldge of Electromacgnitic and Ultrasonic tools capabilities and
limitations.
 Interpreation and evaluations
o Worked in field with H2S and soure production, onshore and offshore.
o RACI, process and Workflows
o Enter-departmental procedures and communication protocols.
o Contract, SOW, tender initiation, management and follow up.

WORK HISTORY
SEPTEMBER 2021- PRESENT
QATAR ENERGY, QATAR
HEAD WELL INTEGRITY ONSHORE
 Design Well integrity software, lead development team
 Provide well integrity trainings
 Build Well integrity failure model based on Risk matrix
 Well Structure design to meet Well integrity requirements
 Lead well integrity team to achieve annual objectives and targets
 Generate well integrity reports along with recommendations based on inspections,
tests and investigations.
 Prepare/arrange Well integrity workshops
 Provide technical and efficiency studies regarding well integrity workflow and
process.
 Well integrity studies
MAY 2014- SEPTEMBER 2021
QATAR ENERGY, QATAR
SENIOR WELL INTEGRITY ENGINEER
 Review and analyze well data and results of well integrity investigations.
 Diagnose the well integrity issues and come up with the most efficient and
economical available solution to ensure the integrity of Dukhan wells.
 Consult, applicable and updated ISO/API/NORSOK standards.
 Ensure the well integrity contracts are in line and as per requirement for well
integrity diagnostics and repairs Riglessly.
 Establish MAASP for all investigated wells during the year as well as for other
critical wells as and when required.
 Review workover proposals and follow up the workover operations closely.
 Ensure KPI and work quality as per best well integrity engineering practices
 Well Design review
JUN 2013 – FEBRUARY 2014
QATAR ENERGY, QATAR
SENIOR PETROPHYSICIST
 Provide corrosion, cement and leak detection logging interpretation report along
with recommendations during Rig and Rigless operations.
 Supervise E-line logging operations and Downhole video camera activities”
 Assist in diagnostic work for well integrity investigations and provide required
remedial proposals from Petrophysical point of view.
 DAS/DTS Leak detection and behind pipe flow characterization log evaluation and
interpretation
 Design logging program based on well integrity issue.
 Use Production logging data to evaluate well integrity possible failures (Cross flow
between formations, temperature changes anomalies)
SEPTEMBER 2012 – JUNE 2013
QATAR ENERGY, QATAR
SENIOR COMPLETION ENGINEER (WELL INTEGRITY)
 Ensuring that all engineering work is carried out in accordance with specifications,
statutory requirements, laws, rules, regulations and other contractual requirements.
With due regards to safety, operability and maintainability
 Prepare WI Investigation procedures, guidelines and program
 Prepare and supervise operation
 Prepare contract, and carry out technical evaluation for WI Investigation related
contract.
 Call and invite service companies for trial operations of new technologies.
  Leak detection and corrosion logging interpretation
 Present and discuss final well report with management.
 Coordinate with asset holders, plans and program.
 Prepare final reports and recommendation.
APRIL 2009 – JUNE 2012
QATAR GAS OPERATING COMPANY, QATAR
WELL OPERATIONS SPECIALIST OFFSHORE.
Duties :
 Supervise E-line logging operations
 Prepare procedures and JSA
 Logistics and planning Offshore operations
 Stock management
 SCSSSV troubleshooting and problems investigation
 Slick line fishing operations
 Platforms start up
DECEMBER 2009 – DECEMBER 2010
PETRO MENTOR, CHINA
TRAINING INSTRUCTOR (CALL OUT)

Training instructor : For Drilling, Workover, Completion and well testing

operations
JANUARY 2006 - APRIL 2009
ANADARKO-SH, ALGERIA
WELL OPERATIONS ENGINEER
 Prepare program for completion, Slick line, coiled tubing, well test and wellhead
maintenance operations
 Supervise and ensure the execution of the above mentioned operations.
 Frac Iron inspection and Re-certifications.
 Wellhead Maintenance
JANUARY 2005 - JANUARY 2006
ANADARKO-SH, ALGERIA
WELL PROJECT ENGINEER
 Manage / control Budget and AFE tracking
 Field change proposals (FCP)
 Prepare well operations related contracts, scope of work, technical and commercial
evaluation.
JANUARY 2003 - JANUARY 2005
ANADARKO-SH, ALGERIA
SURFACE OPERATIONS ENGINEER
 Commissioning new wells, tie-in.
 Prepare surface installation for construction department.
 Follow up chemical injection and corrosion inhibiter injection.
 Plan and execute Wellhead maintenance operations
JANUARY 2002 - JANUARY 2003
ANADARKO-SH, ALGERIA
OPERATIONS ENGINEER
 Follow up Coiled tubing underbalanced drilling operation CTUBD.
 Well test operations
 Wellhead maintenance and valve repair.
 Tubular inspection (NDT)
NOVEMBER 2000 - JANUARY 2002
ANADARKO-SH, ALGERIA
WORKOVER OPERATIONS ENGINEER
 Execute the client workover program.
 Retrieve old completion string and run new one as per client requirement.
 Retrieve completion with SCSSSV stuck in C/position, surface inspection and
testing.
 Changed gravel pack-screen joints open hole completion to tie- back cased hole
completion.
JANUARY 1999 - JUNE 1999
SONATRACH HYDRA, ALGERIA
RESERVOIR TRAINING ENGINEER
 Study WAG Injection Project
JANUARY 1998 - MARCH 1998
ENAFOR HMD, ALGERIA
WORKOVER TRAINING ENGINEER
 Workover process
 Rig operations activities
 Completion running

ADDITIONAL TECHNICAL
SKILLS
  Good background with OFM.
 Good background with AutoCAD
 Familiar with well integrity management softwares
 Very Good background with OpenWells software (Landmark).
 Good knowledge with drilling and Workover operations.
 Full understanding of the production chain from reservoir through facilities.
 Deep understanding of production workflows from reservoir surveillance, well
operations to production optimization.
 Very good interpersonal skills and team player.


PERSONAL BIO
Date & Place of Birth 24 July 1974 – Al-bayadh, Algeria
Citizenship Algerian
Marital status Married, Seven children