Scribd
Upload
118 views

Slab Design Calculation PDF

The document provides slab design calculations for slab S2 based on ACI 318M - 2011. It includes calculations for maximum and minimum reinforcement limits, moment coefficients, design moments at supports and midspan, required and provided reinforcement areas, and shear capacity checks. Reinforcement of 10mm bars at 195mm centers was provided to satisfy the design moment and distribution reinforcement requirements. Shear capacity checks confirmed the slab is safe in shear.

Uploaded by

Randy Viola
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
118 views

Slab Design Calculation PDF

The document provides slab design calculations for slab S2 based on ACI 318M - 2011. It includes calculations for maximum and minimum reinforcement limits, moment coefficients, design moments at supports and midspan, required and provided reinforcement areas, and shear capacity checks. Reinforcement of 10mm bars at 195mm centers was provided to satisfy the design moment and distribution reinforcement requirements. Shear capacity checks confirmed the slab is safe in shear.

Uploaded by

Randy Viola
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SLAB DESIGN CALCULATIONS

ACI 318M - 2011

Item CLAUSE / TABLE


1. Ptmax : 10.3.5
2. Ptmin : 7.12.2.1/10.5.4
3. Vc : 11.11.2.1
4. Av : 11.4.7.2
5. Moment calculations : 13.6
6. spacing between main bars : 10.5.4
7. spacing between distribution bars : 7.12.2.2
8. Minimum reinforcement : 7.12.2.1
9. fs,perm : 10.6.4
10. fc,perm : 10.2.7.1
10. Wcr : Eq 4.2(a)

Slab No. : S2
Level = 5.4m
Design Code = ACI 318M - 2011
Grade Of Concrete = C20
Grade Of Steel = Fy280
Clear Cover = 20.000 mm
Long Span, Ly = 4.470 m
Short Span, Lx = 4.300 m
Imposed Load = 2.300 kN/sqm
Live Load, Qk = 1.900 kN/sqm
Slab Thickness = 125.000 mm
Effective Depth Along LX, Deffx = 100.000 mm
Effective Depth Along LY, Deffy = 90.000 mm
Self Weight = 3.125 kN/sqm
Total Load, TL (ultimate) = 9.550 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span


Side1 Side2 Side1 Side2
Beam
        B (mm) 250 350 250 250
        D (mm) 400 450 400 400
        Ib (mm4)    x106 1333.33 2657.81 1333.33 1333.33
Adjacent Slab
        Thk (mm) - 125 125 125
        Span (mm) - 4700 4050 3700
        Ib (mm4)    x106 349.93 732.42 693.36 664.88
αf lx, αf ly 3.81 3.63 1.92 2.01
αf 2.84
Ln (mm) 4000 4220
L2 (mm) 2360 2300
Total BM (kNm) 45.08 48.9
Bottom
        Moment Coefficent 0.57 0.35
        Distributed Moment (kNm) 25.69 17.11
        CS Moment (kNm) 18.97 12.63
        MS Moment (kNm) 6.73 4.48
        Moment on Beam (kNm) 16.12 10.74
        Design Moment M1, M3 (kNm) 2.84 1.89
Top
        Moment Coefficent 0.7 0.65
        Distributed Moment (kNm) 31.55 31.78
        CS Moment (kNm) 23.29 23.46
        MS Moment (kNm) 8.26 8.32
        Moment on Beam (kNm) 19.8 19.94
        Design Moment M2, M4 (kNm) 3.491 3.52

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 2.845 kNm
Area Of Reinforcement = 113.958 sqmm/m
Required (BM)
Reinforcement Provided = 10mm @ 195 C/C
= 403.000 sqmm/m
Short Span Negative Moment At Continuous Support -
M2 = 3.494 kNm
Area Of Reinforcement = 140.255 sqmm/m
Required (BM)
Reinforcement Provided = 10mm @ 195 C/C
= 403.000 sqmm/m
Long Span Positive Moment At Midspan -
M3 = 1.895 kNm
Area Of Reinforcement = 84.194 sqmm/m
Required (BM)
Reinforcement Provided = 10mm @ 195 C/C
= 403.000 sqmm/m
Long Span Negative Moment At Continuous Support -
M4 = 3.519 kNm
Area Of Reinforcement = 157.423 sqmm/m
Required (BM)
Reinforcement Provided = 10mm @ 195 C/C
= 403.000 sqmm/m
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 180.000 sqmm/m
Required
Reinforcement Provided = 10mm @ 195 C/C
= 403.000 sqmm/m

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 10.266 kN
Nominal Shear, Vc = 76.026 kN
> 10.266 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x (1 = 10.657 kN
- (Lx / (2 x Ly))))
Nominal Shear, Vc = 68.424 kN
> 10.657 Slab Is Safe In Shear

You might also like