Scribd
Upload
138 views3 pages

Specs Sheet - Ambulift HC Regional

The document provides specifications for a regional ambulift that can transport up to 4 wheelchairs and attendants or combine 1 stretcher, 2 wheelchairs, and assistants. It has a working height range of 1,200mm to 4,000mm and is applicable to various aircraft models. Key features include a Mercedes chassis, hydraulic lifting/stabilizing systems, front and rear platforms, LED lighting, air conditioning, and a price of 148,000 euros.

Uploaded by

gueusquin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
138 views3 pages

Specs Sheet - Ambulift HC Regional

The document provides specifications for a regional ambulift that can transport up to 4 wheelchairs and attendants or combine 1 stretcher, 2 wheelchairs, and assistants. It has a working height range of 1,200mm to 4,000mm and is applicable to various aircraft models. Key features include a Mercedes chassis, hydraulic lifting/stabilizing systems, front and rear platforms, LED lighting, air conditioning, and a price of 148,000 euros.

Uploaded by

gueusquin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Page 1 of 3

REGIONAL AMBULIFT SPECS


Capacity: Maximum load of 4 wheelchairs and corresponding attendants. Possible to combine 1 stretcher, 2
wheelchairs and assistants.

Working Height: Minimum boarding height of 1,200 mm and maximum of 4,000 mm


ATR, Bombardier, A319, A320, A321, B727, B737

Applicable Regulation:
 CE Certificate (2006/42/EC: Machinery Directive)
 IATA AHM 921. Functional specifications for the boarding of passengers with reduced mobility.
 ISO 15845:2014. Aircraft ground equipment. Boarding vehicle for persons with reduced mobility.
Functional requirements and safety.
 EN 1915-1:2013. Aircraft ground support equipment. General requirements. Part 1. Basic safety
requirements
 EN 12312-14: 2015. Aircraft ground equipment. Specific requirements. Part 14: Boarding vehicles for
passengers with reduced mobility.
 EN ISO 12100:2010. Safety of machinery. General principles for design. Risk assessment and risk
reduction.
 ISO 4413:2010. Safety of machinery. Safety requirements for systems and components for hydraulic
and pneumatic transmissions. Hydraulics

Chassis:
 Brand: Mercedes FUSO  Wheelbase: 3,850 mm
 Model: 7C15 AMT Duonic Automated 24V  GVW: 7,490 kg
 Engine 2,998 cm3  Year of manufacture: 2018
 Power: 110 kW / 150 HP  7,500 km’s

Cab Modification: Cutting out the right side of the cab, modification of trim, windows, and adaptation of the
electrical system.

Passengers Cabin:
 4,300 mm length x 2,680 mm width x 2,400 mm
 50 mm sandwich panel.
 2 double seats in the direction of travel
 1,200 mm x 600 mm x 400 mm wood cabinet
 Grab bars plus handles on roof and bar on right side at 1,000 mm
 2 windows on each side and windows on front and rear door
 Glazed sliding front doors with reinforced tracks
 Double hinged inward swinging rear door.
 Gray rice-grain finish floor with tie-down strips for wheelchair anchoring and anti-slip
 Side door on left side for passenger box access
 LED interior and exterior lighting

Front Platform: For access to the aircraft, 750 mm inside gangway. The platform moves 1,300 mm forward
by means of a hydraulic cylinder. Platform equipped with:

 Protection rubbers
 Handrails made of stainless steel
1 rue de la Haye 95731 Roissy CDG Cedex France
[email protected]  +33 17 379 17 17 www.airbusiness-gse.com
Page 2 of 3

 Front door with locking system, infrared reading of side rails to the fuselage of the aircraft.
 Non-slip aluminum floor
 LED work lighting with automatic activation.

Lifting System:
 Full width
 Driven by two single-acting lift cylinders with safety valves.
 Passenger cabin height from 1200mm to 4000mm.
 System operated from driver's cab or passenger's cab.

Stabilizing System: 4 hydraulic stabilizers and safety valves enabling the vehicle to work in winds of up to
100 km/h at a height of 6 m (20 ft.).

Rear Platform: DHOLLANDIA Model DHVO 15 made of aluminum with galvanized guides. Maximum capacity
of 1,000 kg. Equipped with:
 Foldable safety handrails with safety latches
 3 exclusive platform controls (one inside the passenger cabin, one outside the platform and one on
the platform)
 24VDC electric pump and manual pump for emergencies
 Roll-stop
 Flashing lights with extended platform
 Automatically operated LED work lighting

Electric System: 24VDC control system based on 12VDC/110Ah vehicle batteries and 90A reinforced
alternator. Control of all the movements of the body and the front platform by Can Bus system (J1939)
equipped with a control automaton according to international standard AHM 921.
 IP66 protection
 Intercommunication system between passenger cabin and driver's cabin
 Hour meter
 Rear view camera in driver's cab

Hydraulic System:
 Gear pump driven by PTO.
 70-liter capacity tank
 Electrohydraulic main distributor
 Maximum system pressure is 220 bar
 24VDC emergency pump
 Manual pump

Air Conditioning:
 Ceiling-mounted unit
 Brand: Houghton Belaire 2.4 kW
 Module combi hot/cold
 Inverter AC mastervolt 2.5 kW
 Wireless remote control

Price: 148,000.00 € (EXW Paris) *


(*) The unit will be checked and refurbished in case of need (painting, tires, etc.).

1 rue de la Haye 95731 Roissy CDG Cedex France


[email protected]  +33 17 379 17 17 www.airbusiness-gse.com
Page 3 of 3

Pictures:

1 rue de la Haye 95731 Roissy CDG Cedex France


[email protected]  +33 17 379 17 17 www.airbusiness-gse.com

You might also like