Network Indoor Station

Configuration Guide
 Network Indoor Station Configuration Guide

Legal Information
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

About this Manual

The Manual includes instructions for using and managing the Product.
Pictures, charts, images and all other information hereinafter are for
description and explanation only. The information contained in the Manual
is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version of this Manual at the Hikvision
website ( https://www.hikvision.com/ ).
Please use this Manual with the guidance and assistance of professionals
trained in supporting the Product.

Trademarks

and other Hikvision's trademarks and logos are the

properties of Hikvision in various jurisdictions.
Other trademarks and logos mentioned are the properties of their
respective owners.

Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL
AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND
FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”.
HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR
FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS
AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR
ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR
LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT,
TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN

i
 Network Indoor Station Configuration Guide

CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR
INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY
RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION
WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE
LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE
CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE,
FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE
RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND
OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY
PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION
OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN
THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR
FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATER PREVAILS.

Data Protection
During the use of device, personal data will be collected, stored and
processed. To protect data, the development of Hikvision devices
incorporates privacy by design principles. For example, for device with facial
recognition features, biometrics data is stored in your device with
encryption method; for fingerprint device, only fingerprint template will be
saved, which is impossible to reconstruct a fingerprint image.
As data controller, you are advised to collect, store, process and transfer
data in accordance with the applicable data protection laws and regulations,
including without limitation, conducting security controls to safeguard
personal data, such as, implementing reasonable administrative and
physical security controls, conduct periodic reviews and assessments of the
effectiveness of your security controls.

ii
 Network Indoor Station Configuration Guide

Symbol Conventions
The symbols that may be found in this document are defined as follows.

Symbol Description

Indicates a hazardous situation which, if not avoided, will or

Danger
could result in death or serious injury.

Indicates a potentially hazardous situation which, if not

Caution
avoided, could result in equipment damage, data loss,
performance degradation, or unexpected results.

Note Provides additional information to emphasize or

supplement important points of the main text.

iii
 Network Indoor Station Configuration Guide

Safety Instruction

Warning
• The working temperature of the device is from -10 ºC to 55 ºC.
• All the electronic operation should be strictly compliance with the electrical
safety regulations, fire prevention regulations and other related regulations in
your local region.
• Please use the power adapter, which is provided by normal company. The power
consumption cannot be less than the required value.
• Do not connect several devices to one power adapter as adapter overload may
cause over-heat or fire hazard.
• Please make sure that the power has been disconnected before you wire, install
or dismantle the device.
• When the product is installed on wall or ceiling, the device shall be firmly fixed.
• If smoke, odors or noise rise from the device, turn off the power at once and
unplug the power cable, and then please contact the service center.
• If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the device yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)

Caution
• Do not drop the device or subject it to physical shock, and do not expose it to
high electromagnetism radiation. Avoid the equipment installation on vibrations
surface or places subject to shock (ignorance can cause equipment damage).
• Do not place the device in extremely hot (refer to the specification of the device
for the detailed operating temperature), cold, dusty or damp locations, and do
not expose it to high electromagnetic radiation.
• The device cover for indoor use shall be kept from rain and moisture.
• Exposing the equipment to direct sun light, low ventilation or heat source such
as heater or radiator is forbidden (ignorance can cause fire danger).
• Do not aim the device at the sun or extra bright places. A blooming or smear
may occur otherwise (which is not a malfunction however), and affecting the
endurance of sensor at the same time.

iv
 Network Indoor Station Configuration Guide

• Please use the provided glove when open up the device cover, avoid direct
contact with the device cover, because the acidic sweat of the fingers may erode
the surface coating of the device cover.
• Please use a soft and dry cloth when clean inside and outside surfaces of the
device cover, do not use alkaline detergents.
• Please keep all wrappers after unpack them for future use. In case of any failure
occurred, you need to return the device to the factory with the original wrapper.
Transportation without the original wrapper may result in damage on the device
and lead to additional costs.
• Improper use or replacement of the battery may result in hazard of explosion.
Replace with the same or equivalent type only. Dispose of used batteries
according to the instructions provided by the battery manufacturer.
• Input voltage should meet both the SELV and the Limited Power Source
according to 60950-1 standard.
• The power supply must conform to LPS. The recommended adaptor models and
manufacturers are shown as below. Use the attached adapter, and do not
change the adaptor randomly.
Model Manufacturer Standard
ADS-24S-12 1224GPCN SHENZHEN HONOR CEE
ELECTRONIC CO.,LTD
G0549-240-050 SHENZHEN GOSPELL DIGITAL CEE
TECHNOLOGY CO.,LTD
TS-A018-120015Ec SHENZHEN TRANSIN CEE
TECHNOLOGIES CO., LTD

v
 Network Indoor Station Configuration Guide

Regulatory Information

FCC Information
Please take attention that changes or modification not expressly approved
by the party responsible for compliance could void the user's authority to
operate the equipment.
FCC compliance: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help
This equipment should be installed and operated with a minimum distance
20cm between the radiator and your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.

vi
 Network Indoor Station Configuration Guide

EU Conformity Statement
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable
harmonized European standards listed under the EMC Directive
2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/
65/EU

2012/19/EU (WEEE directive): Products marked with this symbol

cannot be disposed of as unsorted municipal waste in the
European Union. For proper recycling, return this product to your
local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more information
see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery

that cannot be disposed of as unsorted municipal waste in the
European Union. See the product documentation for specific
battery information. The battery is marked with this symbol,
which may include lettering to indicate cadmium (Cd), lead (Pb),
or mercury (Hg). For proper recycling, return the battery to your
supplier or to a designated collection point. For more information
see:www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radioexempts de licence. L'exploitation est autorisée aux deux
conditions suivantes :

vii
 Network Indoor Station Configuration Guide

1. l'appareil ne doit pas produire de brouillage, et

2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to
other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur
radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou
inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de
réduire les risques de brouillage radioélectrique à l'intention des autres
utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité
nécessaire à l'établissement d'une communication satisfaisante.
This equipment should be installed and operated with a minimum distance
20cm between the radiator and your body.
Cet équipement doit être installé et utilisé à une distance minimale de 20
cm entre le radiateur et votre corps.

viii
 Network Indoor Station Configuration Guide

Contents
1 About this Manual ...................................................................................... 1
2 Local Operation .......................................................................................... 2
2.1 Activate Indoor Station ..................................................................................... 2

2.2 Quick Operation ................................................................................................ 2

2.3 Configuration Settings ....................................................................................... 5

2.3.1 Set Indoor Station Network Parameters ................................................... 5
2.3.2 Set Linked Device IP .................................................................................. 6
2.3.3 Set Indoor Station No. .............................................................................. 7
2.3.4 Add Camera .............................................................................................. 8
2.3.5 Zone and Alarm Settings ........................................................................... 8
2.4 Password Settings ........................................................................................... 11
2.5 Synchronize Time ............................................................................................ 12
2.6 Sound Settings ................................................................................................. 13

2.7 Restore Indoor Station .................................................................................... 14

2.8 System Settings ............................................................................................... 15

2.9 View Open Source Software License ............................................................... 16

3 Remote Operation via the client software ............................................... 17

3.1 Activate Device Remotely ............................................................................... 17

3.2 Device Management ....................................................................................... 17

3.2.1 Add Video Intercom Devices .................................................................. 18

3.2.2 Modify Network Information ................................................................. 20

3.3 System Configuration ...................................................................................... 21

ix
 Network Indoor Station Configuration Guide

3.4 Remote Configuration ..................................................................................... 21

3.4.1 System .................................................................................................... 21

3.4.2 Video Intercom ....................................................................................... 26

3.4.3 Network .................................................................................................. 32

3.5 Person Management ....................................................................................... 35

3.5.1 Organization Management ..................................................................... 35

3.5.2 Person Management .............................................................................. 36

A. Communication Matrix and Device Command ....................................... 40

x
 Network Indoor Station Configuration Guide

1 About this Manual

Get the manual and related software from or the official website (http://
www.hikvision.com).

Product Model

Network Indoor Station DS-KH6320-LE1/DS-KH6320-LSE1/DS-

KH6220-LE1

1
 Network Indoor Station Configuration Guide

2 Local Operation

2.1 Activate Indoor Station

You can only configure and operate the indoor station after creating a password for
the device activation.
Steps
1. Power on the device. It will enter the activation page automatically.

Figure 2-1 Activation Page

2. Create a password and confirm it.
3. Tap OK to activate the indoor station.
Note
We highly recommend you to create a strong password of your own choosing
(using a minimum of 8 characters, including at least three kinds of following
categories: upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product. And we
recommend you change your password regularly, especially in the high security
system, changing the password monthly or weekly can better protect your
product.

2.2 Quick Operation

After device activation, the wizard page will pop up.

2
 Network Indoor Station Configuration Guide
Steps
1. Choose Language and tap Next.
2. Set network parameters and tap Next
- Edit IP Address, Subnet Mask and Gateway.
- Enable DHCP, the device will get network parameters automatically.

Figure 2-3 Network Parameters

3. Select the device type.
- Select Indoor Station, and set the floor and room No. Tap Next, and set the
linked main door station.
Note
If the main door station and the indoor station are in the same LAN, the
main door station will be displayed in the list. Tap the device or enter the
serial No. to link.

3
 Network Indoor Station Configuration Guide

Figure 2-4 Indoor Station Settings

- Select Indoor Extension, and set the No. Tap Next, and set the linked indoor
station.
Note
If the indoor extension and the indoor station are in the same LAN, the
indoor station will be displayed in the list. Tap the device or enter the serial
No. to link.

Figure 2-5 Indoor Extension Settings

4. Link related devices and tap Next.

4
 Network Indoor Station Configuration Guide

Figure 2-6 Related Device

1) Set the linked device's parameters.
Note
If the device is inactive, the system will pop up the dialog to activate the
device.
2) Tap to pop up the Network Settings page.
3) Edit the network parameters of the door station manually or enable DHCP to
get the network parameters automatically.
4) Tap OK to save the settings.
5. Tap Finish to save the settings.

2.3 Configuration Settings

Configuration settings is required before starting using the indoor station. It is
necessary to set the indoor station network, room No., linked devices, device time
display, and so on.

2.3.1 Set Indoor Station Network Parameters

Network connection is mandatory for the use of the indoor station. Set the network
parameters after activating the indoor station. Only when the IP address of the
indoor station is in the same network segment as other devices, it can work properly
in the same system.

5
 Network Indoor Station Configuration Guide

Steps
Note
The default IP address of the indoor station is 192.0.0.64.
Two ways are available for you to set IP address: DHCP, and set IP address manually.
1. Tap Settings → → to enter the network settings page.
Note
Enter activate password as the admin password.

Figure 2-7 Network Settings

2. Enable DHCP, then the indoor station can search and get an IP address
automatically.
Note
Skip the following steps if you have enabled DHCP.

3. Set the Local IP, Subnet Mask and Gateway manually.

2.3.2 Set Linked Device IP

Linked network parameters refers to the network parameters of devices (like door
station, doorphone, master station, center, etc.), to which the indoor station is
linked. Linked devices for the indoor station refers to door station, center, master
station, and doorphone.

6
 Network Indoor Station Configuration Guide

Steps
Note
Here take door station network settings as example.
1. Tap Settings → → to enter the device management page.
Note
Default admin password is the activation password.

Figure 2-8 Device Management

2. Tap Main Door Station to pop up the device information dialog.
1) Tap to switch the device type.
2) Edit the IP address of the main door station.

2.3.3 Set Indoor Station No.

Indoor station No. and the indoor extension No. are numbers, which can be dialed
by other devices to call the indoor station and the indoor extension in an intercom
system. The indoor station No., is composed of the floor No. and the room No.
The indoor extension No. should be a numeric from 1 to 5.
Up to 5 indoor extensions can be set for 1 indoor station.
Steps
1. Tap Settings → → to enter the indoor station No. settings page.

7
 Network Indoor Station Configuration Guide

Note
Default admin password is the activation password.

Figure 2-9 Set Indoor Station No.

2. Configure the indoor station and indoor extension informations.
- Select Indoor Station as Indoor Station Type. Edit the Room No. and Floor
No.
- Select Indoor Extension as Indoor Station Type. Edit the Room Name and
extensionNo.

2.3.4 Add Camera

Steps
1. Tap Settings → → to enter the device management page.
Note
Default admin password is the activation password.

2. Tap + → Camera to pop up the dialog box.

3. Enter the device name and IP address.
4. Enter the port No. and channel No.
5. Enter the user name and password of the camera.
6. Tap OK to add the camera.

2.3.5 Zone and Alarm Settings

8
 Network Indoor Station Configuration Guide

Zone Settings
You can set the zone type, alarm type and delay time and other parameters of 8
zones.

Before You Start

Tap Settings → → Preference to enable Alarm function.
Steps
Note
Arming status page and zone settings page are hidden by default. You should enable
alarm function first.
1. Tap Settings → Zone Settings to enter the zone settings page.

Figure 2-10 Zone Settings

2. Press a zone to pop up the zone editing dialogue box.
3. Set the zone type, alarm type, status of arming status, entering delay, and exiting
delay.
4. Tap OK to save the settings.
Note
• 7 zone types are selectable: Panic Button, Door Magnetic, Smoke Detector,
Active Infrared, Passive Infrared, Gas Detector, and Doorbell.
• 3 alarm types are selectable: 24h Alarm, Instant Alarm, and Delay Alarm.
Set the alarm type as 24h alarm, and the zone will be armed for 24h.
Set the alarm type as instant alarm, and the zone will alarm once it's
triggered.

9
 Network Indoor Station Configuration Guide

Set the alarm type as delay alarm, and you should set the entering delay
duration and exiting delay duration.
• Both the entering delay duration and the exiting delay duration are from 30s
to 60s.
• For Gas Detector and Smoke Detector, the alarm type is set as default 24h
alarm. The alarm type of them can not be changed.

Arming Mode Settings

4 arming modes can be configured: stay mode, away mode, sleeping mode and
custom mode.
Before You Start
Tap Settings → → Preference to enable Alarm function.
Steps
Note
Arming status page and zone settings page are hidden by default. You should enable
alarm function first.
1. Tap Settings → → Alarm Settings to enter the arming mode settings page.
2. Tap Stay Mode, Away Mode, Sleeping Mode, or Custom to enter the page.

Figure 2-11 Arming Mode Settings

3. Arm the selected zone.

10
 Network Indoor Station Configuration Guide

Note
• Zones are configurable on the arming mode page.
• 24H alarm zone including smoke detector zone and gas detector zone will be
triggered even if they are disabled.
• Arming mode settings should be configured with the settings of arming
status on the user page of the device.

2.4 Password Settings

You can edit the duress code, unlock password and arm/disarm password of the
indoor station.
You can edit the arm/disarm password of the indoor extension.
Steps
1. Tap Settings → to enter the password settings page.

Figure 2-12 Password Settings

2. Tap Unlock Password, Arm/Disarm, or Duress Code to pop up the password
settings dialog box.
Unlock Password
Enter the unlock password and room No. on the door station to open the
door.
Arm/Disarm
Create an arm/disarm password before configuring alarm parameters.

11
 Network Indoor Station Configuration Guide

Arm or disarm the zone for the indoor station by entering the arm/disarm
password.
Note
Arm/Disarm settings page is hidden by default. Tap Settings → →
Preference to enable Alarm function, you can edit the alarm parameters.
Duress Code
When you are hijacked and forced to open the door, you can enter the
duress code. An alarm will be triggered to notify the management center
secretly.
Note
The duress code and the unlock password cannot be the same.

3. Enter the old password.

4. Create a new password and confirm it.
5. Tap OK to save the settings.
Note
Indoor Extension only supports admin password and arm/disarm password.

2.5 Synchronize Time

Steps
1. Tap Settings → , and enter the password.
2. Tap to enter the time settings page.

12
 Network Indoor Station Configuration Guide

Figure 2-13 Synchronize Time

3. Enable NTP.
4. Enter Sync Interval, IP Addr/Domain, and Port No.
Note
The default unit of synchronizing interval is minute.

5. Select Time Zone.

2.6 Sound Settings

You can set the ringtone, ring duration, volume of microphone and loudspeaker,
enable/disable touch sound, and auto-answer on call settings page.
Steps
1. Tap Settings → to enter the call settings page.

13
 Network Indoor Station Configuration Guide

Figure 2-14 Call Settings

2. Set corresponding parameters.
Ringtone
There are 3 ringtones by default, and you can custom and import at most 4
ringtones via Batch Configuration Tool or iVMS-4200 Client Software.
Ringtone Duration: The maximum duration of indoor station when it is called
without being accepted. Ringtone duration ranges from 30 s to 60 s.
Volume Settings
Adjust the microphone and loudspeaker volume.
Touch Sound/Auto Answer
You can enable touch sound/auto answer.
Note
Indoor Extension does not support the ring duration settings.

2.7 Restore Indoor Station

Steps
1. Tap Settings → , enter the admin password (activation password) to enter the
settings page.
2. Tap to enter the restore page.

14
 Network Indoor Station Configuration Guide

Figure 2-15 Restore Settings

3. Restore the indoor station. You can choose from restore default settings or
restore all settings.
- Tap Restore Default Settings to restore the default settings and reboot the
system.
- Tap Restore All to restore all settings to factory parameters and reboot the
system.

2.8 System Settings

You can also view the device information, set the system the language, the
brightness, reboot, upgrade, auto-answer, and do not disturb function.

View Device Information

Tap Settings → to enter the page.

You can view the Model, Version, and Serial No..

Time Settings

Tap Settings → → Time to view and change the system time.

Clean Screen
Enable the clean screen function and the screen will be locked for 30 s. In
the time duration, you can clean the screen surface. Hold the disable icon or
wait for 30 s to end the status.

15
 Network Indoor Station Configuration Guide

Language

Tap Settings → → System Language to change the system language.

Note
The indoor station supports 5 languages.

Shortcut Icon on Home Page

Tap Settings → → Preference to enter the preference page.

Enable Call Elevator, Alarm, or Center, and the icon will be displayed on the
home page.

2.9 View Open Source Software License

On the home page, tap Settings → to enter the open source disclaimer page.

Figure 2-16 OSS Page

16
 Network Indoor Station Configuration Guide

3 Remote Operation via the client

software
The Video Intercom module provides remote control and configuration on video
intercom products via the iVMS-4200 client software.

3.1 Activate Device Remotely

You can only configure and operate the indoor station after creating a password for
the device activation.
Before You Start
Default parameters of indoor station are as follows:
• Default IP Address: 192.0.0.64.
• Default Port No.: 8000.
• Default User Name: admin.
Steps
1. Run the client software, enter Device Management, check the Online Device
area.
2. Select an inactivated device and click the Activate.
3. Create a password, and confirm the password.
Note
We highly recommend you to create a strong password of your own choosing
(using a minimum of 8 characters, including at least three kinds of following
categories: upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product. And we
recommend you change your password regularly, especially in the high security
system, changing the password monthly or weekly can better protect your
product.

4. Click OK to activate the device.

3.2 Device Management

17
 Network Indoor Station Configuration Guide

Device management includes device activation, adding device, editing device, and
deleting device, and so on.
After running the iVMS-4200, video intercom devices should be added to the client
software for remote configuration and management.

3.2.1 Add Video Intercom Devices

Steps
Note
• You can add at most 512 indoor stations and master stations in total to the
client, and add at most 16 door stations to the client.
• For video intercom devices, you are required to create the password to activate
them before they can be added to the software and work properly.
• You can add online video intercom devices, and add them manually. Here take
adding online video intercom devices as example.
1. Click Maintenance and Management → Device Management to enter the
device management page.
2. Click the Device tap.
3. Click Add to add the device to the client.

18
 Network Indoor Station Configuration Guide

Figure 3-1 Add the Device

4. Optional: Click Online Device, the active online devices in the same local subnet
with the client software will be displayed on the Online Device area.
Note
To add online devices to the software, you are required to change the device IP
address to the same subnet with your computer first.
1) You can click Refresh Every 60s to refresh the information of the online
devices.
2) Select the devices to be added from the list.
3) Click Add to Client to add the device to the client.
5. Input the required information.
Nickname

19
 Network Indoor Station Configuration Guide

Edit a name for the device as you want.

Address
Input the device's IP address. The IP address of the device is obtained
automatically in this adding mode.
Port
Input the device port No. The default value is 8000.
User Name
Input the device user name. By default, the user name is admin.
Password
Input the device password. By default, the password is 12345.

6. Optional: You can check the checkbox Export to Group to create a group by the
device name. All the channels of the device will be imported to the
corresponding group by default.
The client also provides a method to add the offline devices. Check the checkbox
Add Offline Device, input the required information and the device channel
number and alarm input number, and then click Add. When the offline device
comes online, the software will connect it automatically.
Note
• Add Multiple Online Devices: If you want to add multiple online devices to
the client software, click and hold Ctrl key to select multiple devices, and
click Add to Client to open the device adding dialog box. In the pop-up
message box, enter the user name and password for the devices to be
added.
• Add All the Online Devices: If you want to add all the online devices to the
client software, click Add All and click OK in the pop-up message box. Then
enter the user name and password for the devices to be added.

3.2.2 Modify Network Information

Select the device from the device list, click , and then you can modify the network
information of the selected device.
Note
You should enter the admin password of the device in the Password field of the pop-
up window to modify the parameters.

20
 Network Indoor Station Configuration Guide

3.3 System Configuration

You can configure the video intercom parameters accordingly.
Steps
1. Click Maintenance and Management → System Configuration → Acs and
videoIntercom to enter the system configuration page.
2. Enter the required information.
Ringtone
Click ... and select the audio file from the local path for the ringtone of
indoor station. Optionally, you can click for a testing of the audio file.
Max. Ring Duration
Input the maximum duration of the ringtone, ranging from 15 seconds to 60
seconds.
Max. Speaking Duration with Indoor Station
Input the maximum duration of speaking with the indoor station, ranging
from 120 seconds to 600 seconds.
Max. Speaking Duration with Door Station
Input the maximum duration of speaking with the door station, ranging from
90 seconds to 120 seconds.

3. Click Save to save the settings.

3.4 Remote Configuration

In the device list area, select a device and click to enter the remote configuration
page.

3.4.1 System
Click System on the remote configuration page to display the device information:
Device Information, General, Time, System Maintenance, User, and RS-485.

21
 Network Indoor Station Configuration Guide

Device Information
Click Device Information to enter device basic information page. You can
view basic information (the device type, and serial No.), and version
information of the device.

Figure 3-2 Device Information

General
Click General to enter device general parameters settings page. You can
view and edit the device name and device ID.

Figure 3-3 General

Time
Click Time to enter the device time settings page.

22
 Network Indoor Station Configuration Guide

Figure 3-4 Synchronize Time

Select Time Zone or Enable NTP. Click Save to save the time settings.
• Time Zone
• Select a time zone from the drop-down list menu.
• Click Synchronization.
• NTP
• Check the checkbox of Enable NTP to enable NTP.
• Enter the server address, NTP port, and synchronization interval.
• DST
• Check the checkbox of Enable DST to enable DST.
• Enter the start time and end time of DST, and set the DST bias.
Note
The default port No. is 123.

System Maintenance
Click System Maintenance to enter the page.

23
 Network Indoor Station Configuration Guide

Figure 3-5 System Maintenance

• Click Reboot and the system reboot dialog box pops up. Click Yes to
reboot the system.
• Click Restore Default Settings to restore the default parameters.
• Click Restore All to restore all parameters of device and reset the device
to inactive status.
Note
• Click Restore Default Settings, all default settings, excluding
network parameters, will be restored.
• Click Restore All, all default settings, including network
parameters, will be restored. The device will be reset to
inactivated status.

• Click Import Configuration File and the import file window pops up.
Select the path of remote configuration files. Click Open to import the
remote configuration file. The configuration file is imported and the
device will reboot automatically.
• Click Export Configuration File and the export file window pops up.
Select the saving path of remote configuration files and click Save to
export the configuration file.

24
 Network Indoor Station Configuration Guide

• Click ... to select the upgrade file and click Upgrade to remote upgrade
the device. The process of remote upgrade will be displayed in the
process bar.
• Select a language, and click Save to change the device system language.
Note
• The device supports 11 languages: English, Russian, German, Italian,
French, Portuguese, Spanish, Turkish, Arabic, Polish, and Vietnamese.
• Rebooting the device is required after you change the system language.

User
Click User to enter the user information editing page.
Select the user to edit and click Modify to enter the user parameter page.

Figure 3-6 User Page

Note
• The new password and confirm password should be identical.
• After editing the password of device, click refresh button from the
device list, the added device will not be there. You should add the device
again with new password to operate the remote configuration.

25
 Network Indoor Station Configuration Guide

RS-485
Click RS485 to enter the RS-485 settings page. You can view and edit the
RS-485 parameters of the device.

Figure 3-7 RS-485 Settings

Note
For indoor station and master station, there are 3 choices for the working
mode: transparent channel, disable, and custom.

3.4.2 Video Intercom

Click Video Intercom on the remote configuration page to enter the video intercom
parameters settings: Device Number Configuration, Time Parameters, Password,
Zone Configuration, IP Camera Information, and Volume Input and Output
Configuration, and so on.

Device ID Configuration
Steps
1. Click ID Configuration to enter device ID configuration page.

26
 Network Indoor Station Configuration Guide

Figure 3-8 ID Configuration

2. Select the device type from the drop-down list, and set the corresponding
information.
3. Click Save to enable the device number configuration.

Time Parameters
Steps
1. Click Time Parameters to enter time parameters settings page.

Figure 3-9 Time Parameters

2. Configure the maximum ring duration, maximum live view time, and call
forwarding time.
3. Click Save.
Note
• Maximum ring duration is the maximum duration of indoor station when it is
called without being received. The range of maximum ring duration varies
from 30s to 60s.
• Maximum live view time is the maximum time of playing live view of the
indoor station. The range of maximum live view time varies from 10s to 60s.

27
 Network Indoor Station Configuration Guide
• Call forwarding time refers to the ring duration limit beyond which the call is
automatically forwarded to the mobile phone designated by the resident.
The range of call forwarding time varies from 0s to 20s.
• For indoor extension, it only requires setting the maximum live view time.

Permission Password
Click Permission Password to enter password changing page.

Figure 3-10 Permission Password

For indoor station, you can change the admin password, arm/disarm password,
unlock password and duress code.
For indoor extension, only admin password and arm/disarm password need to be
configured.

Zone Alarm
Steps
1. Click Zone Alarm to enter the zone settings page.

Figure 3-11 Zone Alarm

28
 Network Indoor Station Configuration Guide

2. Select a zone type from the drop-down list menu.

3. Select an alarm mode from the drop-down list menu.
4. Set the zone status: NO or NC.
5. Set the entering delay, and exiting delay.
6. Select triggers.
7. Click Save to enable zone settings.
Note
• 7 zone types are supported: Emergency Switch, Door Magnetic Switch,
Smoke Detector, Active IR Detector, Passive IR Detector, Combustible Gas
Detector, and DoorBell Switch.
• 3 types of alarm mode are supported: Instant Alarm, 24H Alarm, and Delay
Alarm.
• When the zone type is set to be Instant Alarm, only under arming mode, the
indoor station will receive alarm message when the detector is triggered.
Under disarming mode, it will not receive alarm message when the detector
is triggered.
• When the zone type is set to be 24H Alarm, the indoor station will receive
alarm message when the detector is triggered no matter it is under arming
mode or disarming mode.
• When the zone type is set to be Delay Alarm, only under arming mode, the
indoor station will receive alarm message when the detector is triggered.
Under disarming mode, it will not receive alarm message when the detector
is triggered.
• After setting enter delay time, if OK is pressed within the enter delay time
after the alarm, the alarm event will not be uploaded to the management
center; if OK is not pressed within the enter delay time after the alarm, the
alarm event will be uploaded to the management center.
• The exit delay is the time between you enable the arming mode and the
arming takes effect.

IP Camera Information
You can add, delete and modify cameras that can be added to the video intercom
products, with two ways of getting stream: direct or URL. By exporting and importing
the added device information, you can edit added devices parameters in batch.

29
 Network Indoor Station Configuration Guide

Add Camera
Steps
1. Click IP Camera Information to enter IP camera information page.

Figure 3-12 IP Camera Information

2. Click Add to pop up the device adding dialog box.
3. Enter corresponding information (device name, IP address, port No., user name,
password, etc.), and click OK.
Note
Indoor extension does not support this function.

Export and Import Added Device Information

Steps
1. Click Export to export the added device information file.
2. Edit parameters of added devices in batch in the exported file.
3. Click Import to pop up importing box, and open the edited added device
information file.

30
 Network Indoor Station Configuration Guide

Figure 3-13 Import Added Device Information

Volume Input and Output

Steps
1. Click Volume Input/Output to enter the volume input and output page.

Figure 3-14 Volume Input and Output

2. Slide the slider to adjust the volume input, volume output and talk volume.
3. Click Save to enable the settings.

Deploy Info
Click Deploy Info, you can get the deploy informations.

31
 Network Indoor Station Configuration Guide

Figure 3-15 Deploy Info

3.4.3 Network

Local Network Configuration

Steps
1. Click Local Network Configuration to enter local network configuration page.

Figure 3-16 Local Network Configuration

2. Enter the local IP address, subnet mask, gateway address, and port No.
3. Click Save to enable the settings.
Note
• The default port No. is 8000.
• After editing the local network parameters of device, you should add the
devices to the device list again.

Linked Devices Network Configuration

In the linked devices network configuration page, you can configure the network
parameters of master stations, SIP servers and management centers of the same

32
 Network Indoor Station Configuration Guide

LAN. The devices can be linked to the door station and realize the linkage between
these devices.
Steps
1. Click Linked Network Configuration to enter linked network configuration page.

Figure 3-17 Linked Network Configuration

2. Enter the master station IP address, (main) door station IP address, SIP server IP
address, management center IP address, and doorphone IP address.
3. Select the main door station type from the drop-down list.
4. Click Save to enable the settings.
Note
• After adding master station IP Address, the linkage between indoor station
and master station can be realized.
• After adding the door station IP Address, the video intercom between indoor
stations of same building can be realized.
• After adding SIP Server Address IP, the video intercom of same community:
video intercom between indoor stations of different building, calling indoor
station from outer door station and video intercom between management
center and indoors.
• After adding management center IP Address, the events can be uploaded to
the management center.
• For indoor extension, only parameter about the main indoor station should
be configured.

33
 Network Indoor Station Configuration Guide

Device Network Configure

In the devices network configuration page, you can configure the network
parameters of master stations, SIP servers and management centers of the same
LAN. The devices can be linked to the door station and realize the linkage between
these devices.
Steps
1. Click Device Network Config to enter the settings page.

Figure 3-18 Device Network Configure

2. Select the Device Type according to your need.
3. Set the Community No., Building No., Unit No., Floor No. and Room No.
4. Enter the master station IP address, (main) door station IP address, SIP server IP
address, management center IP address, and doorphone IP address.
5. Select the main door station type from the drop-down list.
6. Click Save to enable the settings.
Note
• After adding master station IP Address, the linkage between indoor station
and master station can be realized.
• After adding the door station IP Address, the video intercom between indoor
stations of same building can be realized.
• After adding SIP Server Address IP, the video intercom of same community:
video intercom between indoor stations of different building, calling indoor
station from outer door station and video intercom between management
center and indoors.

34
 Network Indoor Station Configuration Guide
• After adding management center IP Address, the events can be uploaded to
the management center.
• For indoor extension, only parameter about the main indoor station should
be configured.

3.5 Person Management

You can add, edit, and delete the organization and person in Person Management
module. Organization and person management is necessary for the video intercom
function.
On the main page, click Person to enter the page.

Figure 3-19 Personal Management Application

The page is divided into two parts: Organization Management and Person
Management.

Organization Management You can add, edit, or delete the

organization as desired.

Person Management After adding the organization, you can

add the person to the organization and
issue card to persons for further
management.

3.5.1 Organization Management

35
 Network Indoor Station Configuration Guide
On the main page of the Client Software, click Person to enter the configuration
page.

Add Organization
Steps
1. In the organization list on the left, click +Add.
2. Input the organization name as desired.
3. You can add multiple levels of organizations according to the actual needs.
1) You can add multiple levels of organizations according to the actual needs.
2) Then the added organization will be the sub-organization of the upper-level
organization.
Note
Up to 10 levels of organizations can be created.

Modify and Delete Organization

You can select the added organization and click to modify its name.
You can select an organization, and click X button to delete it.
Note
• The lower-level organizations will be deleted as well if you delete an
organization.
• Make sure there is no person added under the organization, or the organization
cannot be deleted.

3.5.2 Person Management

After adding the organization, you can add person to the organization and manage
the added person such as issuing cards in batch, importing and exporting person's
information in batch, etc.
Note
Up to 10,000 persons or cards can be added.

36
 Network Indoor Station Configuration Guide

Add Person
Person information is necessary for the video intercom system. And when you set
linked device for the person, the intercom between intercom devices can be realized.
Steps
1. Select an organization in the organization list and click +Add on the person panel
to pop up the adding person dialog.
Note
The Person ID will be generated automatically and is editable.

2. Set basic person information.

1) Enter basic information: name, gender, tel, birthday details, effective period
and email address.
2) Optional: Click Add Face to upload the photo.
Note
The picture should be in *.jpg format.
Click Upload Select the person picture from the local PC to
upload it to the client.
Click Take Phone Take the person's photo with the PC camera.
Click Remote Take the person's photo with the collection device.
Collection
3. Issue the card for the person.
1) Click Credential → Card .
2) Click + to pop up the Add Card dialog.
3) Select Normal Card as Card Type.
4) Enter the Card No.
5) Click Read and the card(s) will be issued to the person.
4. Add fingerprints to the person.
1) Click Credential → Fingerprint .
2) Click + to pop up the Add Fingerprint dialog.
3) Select Collection Mode.
4) Select Fingerprint Recorder or Device.
5) Click Start to collect the fingerprint.

37
 Network Indoor Station Configuration Guide

6) Click Add.

Import and Export Person Information

The person information can be imported and exported in batch.
Steps
1. Exporting Person: You can export the added persons' information in Excel format
to the local PC.
1) After adding the person, you can click Export Person to pop up the following
dialog.
2) Click ... to select the path of saving the exported Excel file.
3) Check the checkboxes to select the person information to export.
4) Click OK to start exporting.
2. Importing Person: You can import the Excel file with persons information in
batch from the local PC.
1) Click Import Person.
2) You can click Download Template for Importing Person to download the
template first.
3) Input the person information to the downloaded template.
4) Click ... to select the Excel file with person information.
5) Click OK to start importing.

Get Person Information from Device

If the added device has been configured with person information (including person
details, fingerprint, issued card information), you can get the person information
from the device and import to the client for further operation.
Steps
Note
This function is only supported by the device the connection mothod of which is
TCP/IP when adding the device.
1. In the organization list on the left, select an organization to import the persons.
2. Click Get from Device to pop up the dialog box.
3. The added device will be displayed.

38
 Network Indoor Station Configuration Guide

4. Click to select the device and then click Get to start getting the person
information from the device.
Note
• The person information, including person details, person's fingerprint
information (if configured), and the linked card (if configured), will be
imported to the selected organization.
• If the person name stored in the device is empty, the person name will be
filled with the issued card No. after importing to the client.
• The gender of the persons will be Male by default.

Modify and Delete Person

Select the person and click Edit to open the editing person dialog.
To delete the person, select a person and click Delete to delete it.
Note
If a card is issued to the current person, the linkage will be invalid after the person is
deleted.

Change Person to Other Organization

You can move the person to another organization if needed.
Steps
1. Select the person in the list and click Change Organization.
2. Select the organization to move the person to.
3. Click OK to save the settings.

39
 Network Indoor Station Configuration Guide

A. Communication Matrix and Device

Command

Communication Matrix
Scan the following QR code to get the device communication matrix.
Note that the matrix contains all communication ports of Hikvision access
control and video intercom devices.

Figure A-1 QR Code of Communication Matrix

Device Command
Scan the following QR code to get the device common serial port
commands.
Note that the command list contains all commonly used serial ports
commands for all Hikvision access control and video intercom devices.

Figure A-2 Device Command

40
UD20151B