Konica Minolta

bizhub PRESS C71hc

Specification & Installation Guide
09/29/2015

bizhub PRESS C71hc General Specifications

Type Console type Power Source Inch: AC208 to 240V 21A 60 Hz
Metric: AC220 to 240V 20A, 50 Hz/60 Hz
Copy Method 4-coupled drum tandem laser electrostatic
method Power Consumption Inch: 4,900W or less (Main body only)
Metric: 4,700W or less (Main body only)
Resolution 1,200 dpi (Equivalent
to 3,600 dpi) x 1,200 dpi Dimensions 760 mm*4 x 903 mm*5 x 1,041 mm6
[W] x [D] x [H] 29.92"4 x 35.55"*5 x 40.98"*6
Gradation 8-bit/256 Gradation
(Main body only)
CPU Core i5 2400 3.1 GHz
Weight Approximately 286 kg/630 lb
System Memory 2 GB (Main body only)
Capacity
*1 MB-506, PF-602m, PF-707 and LU-202 are the options.
Extended Memory System memory capacity can be *2 PF-602m and PF-707 are not available when MB-506 is installed.
*3 For paper size A4 or smaller than 8.5" x 11", it is up to 216 gsm.
extended up to 14GB with IC-602
*4 Excluding the control panel, output tray, work table.
or UK‑104. *5 Including the rear duct.
*6 Height to the top of the main body excluding the control panel.
Max. Printing Area 323 mm × 480 mm
Output Size SRA3, A3, B4, A4, B5, 13" x 19", 11" x 17",
8.5" x 14", 8.5" x 11", 5.5" x 8.5"S Duty Cycle
Tab paper (A4, 8.5" x 11")
Max. 330 mm x 487 mm, bizhub C71hc: Up to 350,000 monthly
Min. 140 mm x 182 mm Maximum monthly print volume supported under
Multi-bypass (Option): SRA3, A3, B4,
A4, B5, 13" x 19", 11" x 17", 8.5" x 14",
standard vendor supplied service. Defines the upper
8.5" x 11", 5.5" x 8.5"S end of the expected customer volume for the device.
Tab paper (A4, 8.5" x 11") Customers should consider multiple machines if average
Max. 330 mm x 487 mm, monthly volume approaches duty cycle on continual basis.
Min. 100 mm x 148 mm
Image Loss Max. 4 mm or less for top edge,
Max. 4.5 mm or less for bottom edge,
Max. 3.0 mm or less for right/left edges
Warm-Up Time 390 seconds or less
First Copy Out Time Color 7.1 seconds or less (A4, 8.5" x 11")
Black and White 5.9 seconds or less
(A4, 8.5" x 11")
Print Speed A4 71 sheets/min.
A3 38 sheets/min.
Tray Capacity Standard Tray 1 (500 sheets, 80 gsm)
Tray 2 (1,000 sheets, 80 gsm)
Option MB-506 (Multi-bypass,
250 sheets, 80 gsm)*1,*2
PF-602m (3,000 sheets x 2,
80 gsm)*1
PF-707 (1,390 sheets x 2,
1,850 sheets x 1, 80 gsm)*1
LU-202 (2,500
sheets x 80 gsm)*1
Paper Weight Standard 62 gsm to 256 gsm*3 (Plain,
Fine, Color Specific) 81 gsm
to 256 gsm*3 (Coated)
Option (MB-506) 62 gsm to 300 gsm
(Plain, Fine, Color Specific)
Continuous Copy Up to 9,999 sheets
Count

1
Konica Minolta bizhub PRESS C71hc
Specification & Installation Guide

Space Requirements

1639
1478

1041

Side View
bizhub PRESS C71hc + RU-517 +
OT-502 + MB-506
950 903
200
2053

1639 1639
1478 1478

1130
1041 990
1041

477

315 1108 100 424 410 760 718

100 100 116 250.5 40 100
1623 2918.5

Front View Front View

bizhub PRESS C71hc + RU-517 + bizhub PRESS C71hc + RU-516 + FS-612 + RU-509 + LU-202
OT-502 + MB-506

1639
1478

1020 1041

333 544 1360 1170 400 410 760 996

100 131 40 100
6344

Front View
bizhub PRESS C71hc + RU-516 + FS-532 + PB-503 + SD-506 + FD-503 + RU-509 + PF-707

2
Konica Minolta bizhub PRESS C71hc
Specification & Installation Guide

Environmental Requirements Electrical Requirements

Temperature 50° to 86° F Line options Dedicated NEMA Diagram for L6–30R

Humidity 10–80% RH Voltage 208-240 VAC

Noise while engine under operation < 80 dBA Amperage 21A 

Noise while feeder under operation 84 dBA Cycles 60 Hz

Ozone emission < 80 mglh NEMA Part No. L6–30R

Fusing range 145 –175 C Cord Length 7.5 ft.

Note: The main electrical outlet must be located within 7.5 feet from the right rear
corner of the main unit.

3
 Konica Minolta bizhub PRESS C71hc
Specification & Installation Guide

Component Considerations
MB-506 Multi Bypass Paper Feed Unit
6 MB-506
Paper Weight 62 gsm to 300 gsm

Paper Size Max. 330 mm x 487 mm, Min. 100 mm x 148 mm

Tray Capacity 250 sheets (80 gsm)

Power Source Supplied from the main body

Power Consumption Max. 28W or less

FS-612 FS-612 RU-509 RU-509
FS-531 FS-531
Dimensions (WxDxH) 19.09" x 19.8" x 12.87" (485 mm x 503 mm x 327 mm)
(Max. dimensions of the whole unit)
MB-506
Weight Approximately 4.2 kg/9.26 lb.
PK-512/513 PK-512/513 IC-308

Banner Kit MK-740

Applicable Models Feeding system - MB-508
FS-612 FS-612 RU-509 systemRU-509
Output - OT-502 Type B/FS-612/FS-531/FS-532 Type B
1 FS-531 HM-102
Paper Size Max. 330 x 1,200 mm, Min. Width 100mm
02m Paper Weights 128 to 256 gsm IC-308
PF-707
PK-512/513 PF-707 PK-512/513
Papaer Type Plain, Fine, Coated paper

Capacity 10 sheets (Plain paper)

1 sheet (Coated paper)
LU-202 LU-202
HM-102

PF-707 Paper Feeder Unit

PF-707HT-504 PF-707 HT-503
Paper Size SRA3, A3, B4, A4, B5, A5, 13" x 19", 12" x 18", 11" x 17", 9" x 11",
(S: Short Edge Feed L) 8.5" x 14", 8.5" x 11"
HT-506
Max. 330.2 mm x 487.7 mm, Min. 100 mm x 140 mm*1
LU-202
Tab paper (A4, 8.5" x 11")LU-202

Paper Type Plain, Fine, Color, Coated, Envelope*2

PB-503
Paper Weight 62 gsm to 300 gsm
HT-504 HT-503
Max. Tray Capacity 4,630 sheets (80 gsm)
HT-506
Tray (upper/middle): 1,390 sheets
Tray (lower tray): 1,850 sheets
WT-511
Power Source Requires own electrical outlet (5-20R).
AU-201
3
Dimensions (WxDxH) IC-415
39.21" x 30.39" x 40.87" (996 mm x 772 mm x 1038 mm)
EF-103
Weight 203 kg/447.4 lb.
IC-602
*1 For the paper whose width is less than 140 mm, use the small size guide. *2 Only lower tray supports envelopes.
WT-511
AU-201 UK-104
HT-511
FS-532 GP-502EF-103 IC-415
UK-206
IC-602
UK-207
UK-104
HT-511
GP-502
UK-206

UK-207

4
 FS-532

FS-612 FS-612 RU-509 RU-50

FS-531 FS-531

Konica Minolta bizhub PRESS C71hc

Specification & Installation Guide
PK-522 PK-512/513 PK-512/513

Component Considerations
PF-602m Paper Feeder Unit
PF-602m PF-602m
Paper Size PF-707 PF-707 12" x 18", 11" x 17", 9" x 11",
SRA3, A3, B4, A4, B5, A5, 13" x 19",
(S: Short Edge Feed L) 8.5" x 14", 8.5" x 11"
Tab paper (A4, 8.5" x 11")
Tray (upper): Max. 330 mm x 487 mm, Min. 100 mm x 182 mm LU-202
Tray (lower): Max. 330 mm x 487 mm, Min. 100 mm x 148 mm

Applicable Paper Plain paper, High quality paper, Coated paper

Paper Weight 
HT-504 Tray (upper) 62 gsm to 256 gsm
Tray (lower) 62 gsm to 300 gsm
HT-506
Max. Tray Capacity 6,000 sheets (80 gsm standard paper) = 3,000 sheets x 2 trays

Power Source Supplied both from the main body.

SD-506 PB-503
Max. Power Consumption DC: 90W or less, AC: 100W or less
FS-612 RU-509 RU-509 Dimensions (WxDxH) 37.28" x 29.53" x 41.14" (947 mm x 750 mm x 1,045 mm)
LC-501
Weight Approximately 374.78 lb./170 kg
WT-511
PK-512/513 IC-308 AU-201
HT-511 Dehumidifier Heater IC-415
EF-103
Power Source Supplied from the main body
IC-602
Max. Power Consumption 40W or less
HM-102
UK-104
Dimensions (WxDxH) 9.47" x 4.89" x 0.31" (240.6 mm x 124.1 mm x HT-511
7.8 mm)
FS-532 FS-532 GP-502
Weight 0.51 lb./232.4 g UK-206

MK-732 UK-207
LU-202 Large Capacity Unit
LU-202 LU-202
Paper Size SRA3, A3, A4, B5, 13" x 19", 12" x 18", 11" x 17", 9" x 11", 8.5" x 14",
(S: Short Edge Feed L) 8.5" x 11"

Tab paper (A4, 8.5" x 11")

HT-503 Max. 330 mm x 487 mm, Min. 210 mm x 182 mm*1
SD-510
HT-506 Applicable Paper Plain paper, High quality paper, Coated paper: 62 gsm to 300 gsm*1

Paper Capacity 2,500 sheets (80 gsm)*2

Power Source Supplied both from the main body.

Max. Power Consumption DC: 70W or less, AC: 50W or less (Not including HT-503)

Dimensions (WxDxH) 27.95" x 25.16" x 18.78" (710 mm x 639 mm x 477 mm)

WT-511 Weight Approximately 92.59 lb./42 kg

AU-201 *1 Available types of paper weighing 300 gsm are limited to specific types. *2 Stacked height 275 mm
IC-415

IC-602

UK-104
HT-511

UK-206

UK-207

5
 IC-308

Konica Minolta bizhub PRESS C71hc

Specification
HM-102 & Installation Guide

Component Considerations continued

HT-503 Dehumidifier Heater

02 LU-202
Power Source Supplied from the main body

Max. Power Consumption DC: 4W or less, AC: 290W or less

HT-503 Dimensions (WxDxH) Dehumidifier Fan Heater Unit:
7.76" x 11.54" x 3.22" (293 mm x 82 mm x 197 mm)
Power Source Unit:
4.76" x 6.3" x 3.15" (121 mm x 80 mm x 160 mm)

Weight Dehumidifier Fan Heater Unit: 3.31 lb./1.5 kg

Power Supply Unit: 1.98 lb./0.9 kg

RU‑509 Relay Unit

FS-612 RU-509 RU-509
Paper Size Max. 330 mm x 487 mm, Min. 100 mm x 140 mm
(S: Short Edge Feed L)

PK-512/513
Paper Weight
IC-308 40 gsm to 350 gsm

Power Source Requires own electrical outlet (5-20R).

Dimensions (WxDxH) 16.25" × 29" × 40.25" (410 mm × 735 mm × 1,020 mm)

Weight Approximately 176.25 lb./60 kg

HM-102

Relay Unit RU-510

FS-612 RU-509 RU-509
LU-202 LU-202 Type Relay unit with 2-ply reversing function

2-ply Reversing Delivery Deliver two sheets in layers while reversing them to the subsequent
IC-308
finishing equipment in simplex printing.
PK-512/513
HT-503 Delivery Deliver each sheet while reversing it to the subsequent finishing
1-ply Reversing
equipment in simplex printing.
HT-506
Straight Delivery Deliver each sheet without reversing it in face-up printing or duplex
HM-102 printing.
Paper Size Standard: 13" x 19"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L,
8.5" x 11"L/P, 9" x 11"P, 5.5" x 8.5"P, Foolscap, PostcardL,
SRA3L, A3L, B4L, A4L/P, SRA4L/P, B5L/P, A5P
Custom: max. 13.00" x 19.17" (331 mm x 488 mm) to min.
3.73" x 5.26" (95 mm x 133 mm)
T-511
LU-202 LU-202 Wide Paper
U-201 Tab Paper
IC-415
Paper Type Recommended for main body

IC-602 Paper Weight

HT-503 Straight delivery: 11 to 93 lb. Bond
1-ply reversing delivery: 11 to 80 lb. Bond
HT-506
UK-104 2-ply reversing delivery: 11 to 68 lb. Bond (11 to 57 lb. Bond
T-511
for bizhub PRESS 1250)
UK-206 Dimensions 16.1 (W) x 28.4 (D) x 40.1 (H) inches

UK-207 Weight Approx. 77.2 lb.

Power Source 24/5 VDC (supplied from the precedent option)

Maximum Power 68 W
T-511
Consumption
U-201
IC-415

IC-602
6

UK-104
T-511
 Konica Minolta bizhub PRESS C71hc
Specification & Installation Guide

Component Considerations
HM-102 Paper Humidfier
RU-509 RU-509
Paper Type Same as the main body.

Power Source 24/5 VDC (Supplied from RU-509)

K-512/513 IC-308 * For Humidifier ON mode, Envelope or Coated, PrePrinted, Blank Insert Sheet, Embossed, and Embossed2 with the weight
under 135 gsm or less cannot be used.

OT-502 DF-626 MB-506

HM-102

FS-531 Finisher
FS-612 FS-612 RU-509 RU-509
FS-531 FS-531Weight (Staple mode) 60 gsm to 209 gsm
Paper
LU-202 LU-202 Paper Size (Staple mode) Max. 314 mm x 458 mm, Min. 182 mm x 148 mm

Paper Capacity (80 gsm) Non-Sort Mode/Sort/Group Mode

PK-512/513 PK-512/513 IC-308
PK-522
Max. 3,000 sheets (A4, B5, 8.5" x 11")
HT-503 Staple Mode
• 2 to 9: 100 sets (Direction: 150 mm to 417 mm)/50 sets (Other)
HT-506 • 10 to 20: 50 sets
• 21 to 30: 30 sets HM-102
• 31 to 40: 25 sets
• 41 to 50: 20 sets
F-602m PF-602m
PF-707 PF-707
Stapling Mode Types Corner Stapling Parallel or diagonal depending on paper size
(Staple Position) 2 Staplings Center spreading 162 mm pitch

Power Source Supplied from the main body. LU-202 LU-202

Max. Power Consumption 80W or less
C-415 Dimensions (WxDxH) 16.69"* x 25.82" x 39" (424 mm* x 656 mm x 990 mm)
HT-504 Width including the primary (main) tray (with the edge closed):
C-602 26.56"/674.5 mm
HT-506
DF-626 MB-506 Width including the primary (main) tray (with the edge pulled out):
UK-104
31.12"/790.5 mm

Weight Approximately 132.28 lb/60 kg

SD-506
UK-206 PB-503
* Excluding the primary (main) tray

UK-207 PK-512/PK-513 Punch Kit

FS-612 FS-612 RU-509 RU-509
FS-531 FS-531 Type FS-integrated type punching operation device for Finisher FS-531/FS-612
WT-511
AU-201 holes), 108 mm (3 holes)
Hole Pitch PK-512: 80 mm (2 holes/4
PK-513: 21 mm, 70 mm, 21 mm IC-415
(Swedish 4 holes) IC-308
PK-512/513 EF-103 PK-512/513
Paper Weight 60 gsm to 128 gsm
IC-602
Paper Size PK-512: 2 holes: A3, B4, A4, B5, 11" x 17", 8.5" x 14", 8.5" x 11"
3/4 holes: A3, B4, A4, B5, 11" x 17", 8.5" x 11"
UK-104
PK-513: A3, B4, A4,HT-511
B5 HM-102
FS-532 GP-502
UK-206paper, Coated paper
Applicable Paper Plain paper, High quality paper, Color
PF-602m (Same as the main body)
MK-732 PF-707 PF-707 UK-207
Power Source Supplied from the main body.

Max. Power Consumption 40W or less

LU-202 LU-202
Dimensions (WxDxH) 5.12" x 18.5" x 4.53"/130 mm x 470 mm x 115 mm

Weight Approx. 6.61 lb./3 kg

SD-510
HT-504 HT-503

HT-506
7
 Konica Minolta bizhub PRESS C71hc
Specification & Installation Guide

Component Considerations continued

FS-612 Finisher
FS-612 FS-612 RU-509 RU-509
FS-531 Paper Weight Staple/Saddle 62 gsm to 105 gsm
Stitching/
Half-Fold Mode
PK-512/513 PK-512/513
Paper Size Staple  3, B4, A4, B5,IC-308
A A5, 12" x 18", 11" x 17", 8.5" x 14", 8.5" x 11", 9" x 11"
Mode Tab paper*1 (A4, 8.5" x 11")
Max. 314 mm x 458 mm, Min. 182 mm x 140 mm,182 mm x 148 mm*2
Saddle A3, B4, A4, 12" x 18", 11" x 17", 8.5" x 14", 8.5" x 11"
Stitching Max. 314 mm x 458 mm Min. 210 mm x 279mm
HM-102
Mode
Half-Fold A3, B4, A4, 12" x 18", 11" x 17", 8.5" x 14", 8.5" x 11"
PF-707 PF-707
Mode Max. 314 mm x 458mm, Min. 210 mm x 279 mm
Tri-Folding A4S, 8.5" x 11"S
PI-502 OC-509 OT-502 DF-626 MB-506
Mode
LU-202
Paper Capacity Non-Sort LU-202
Max. 2,500 sheets
(Main Tray) Mode, Sort/ A4, A4S, B5, 8.5" x 11"
Paper Weight Group Mode 1500 sheets
FS-532 60 gsm
FS-532 SRA3*1, A3, B4, 12" x 18", 11" x 17", 8.5" x 14"
to 300 gsm HT-503
FS-612
HT-506
Paper Capacity Saddle FS-531
Length in the FS-531or less: 15 sets
sub scan direction: 299 mm
(Booklet Tray) Stitching with 5 sheets Other than the above: 20 sets with 5 sheets
Paper Weight Mode
60 gsm to Folding PK-512/513
Length in the sub scan direction: 299 mm or less: 25 sets
PK-522
105 gsm Mode with 3 sheets folding
Other than the above: 33 sets with 3 sheets folding
Tri-Folding 50 sets with 1 sheet folding
Mode
WT-511
AU-201 Paper Capacity (Sub Tray) Max. 100 sheets
Paper Weight 50 gsm to 300 gsm SRA3, A3, B4, A4, 13" x 19", 12" x 18", 11" x 17", 9" x 11", 8.5" x 14"
IC-415PF-602m PF-602m
EF-103 PF-707 PF-707
FD-503 Power Source Supplied from the main body.
IC-602
Max. Power Consumption 80W or less
Dimensions (WxDxH) 16.69"*2 x 25.83" x 39" (424 mm*2 x 656 mm x 990 mm)
UK-104
HT-511 Width including the primary (main) tray (with the edge closed):
02 26.56"/674.5 mm
UK-206 Width including the primary (main) tray (with the edge pulled out):
31.12"/790.5 mm
UK-207 HT-504
Weight 143.3 lb./65kg
*1 Non-sort mode only *2 Excluding the primary (main) tray

LS‑505 Large Capacity Stacker

LS-505 SD-506 PB-503
Paper Size Stacker Tray Mode: Max. 331 mm x 483 mm, Min. 210 mm x 148 mm
(S: Short Edge Feed L) Sub Tray Mode: Max. 330 mm x 487 mm, Min. 100 mm x 148 mm
LC-501 Paper Weight Stacker Tray Mode: 50 gsm to 244 gsm
Sub Tray Mode: 40 gsm to 350 gsm
WT
Paper Capacity (80 gsm) Stacker Tray Mode: Max. 5,000 sheets AU
(S: Short Edge Feed L) Sub Tray Mode: 200 sheets (Z-Fold: 20 sheets, Center-Fold: 40 sheets)
EF-103
Power Source Requires own electrical outlet (5-20R).

Max. Power Consumption 143W or less

Dimensions (WxDxH) 30" x 28.5" x 48.5" (785 mm x 723 mm x 1,020 mm) HT

FS-532 FS-532 GP-502
GP-501 Weight Approximately 242.5 lb./110 kg

MK-732
8
 Konica Minolta bizhub PRESS C71hc
Specification & Installation Guide
OT-502 DF-626 MB-506
PI-502 OC-509 OT-502 DF-626 MB-506

Component Considerations
FS‑532 Finisher
FS-532 FS-532
FS-612 Mode: 62 gsmFS-612
Paper Weight Staple to 300 gsm RU-509 RU-509
FS-531 FS-531 FS-612
Straight/ShiftFS-531 FS-531
Mode: 62 gsm to 300 gsm

Paper Size Staple Mode: Max. 330 mm x 488 mm, Min. 203 mm x 148 mm
PK-512/513 Straight/Shift Mode: Max. 330 mm x 487 mm, Min. 100 mm x
PK-512/513 IC-308
PK-522
PK-522 148 mm (Using small size guides) PK-512/513

Paper Capacity (80 gsm) Max. 4,500 sheets (Main + Sub tray)

Stapling Mode Types Corner stapling: Horizontal, Vertical

2-point stapling: Center HM-102

Power Source Supplied from the machine

02m PF-602m
PF-602m
PF-707
Max. PF-602m
PF-707
Power Consumption 144W or less
FD-503 PF-707 PF-707
Dimensions (WxDxH) 21.5" × 28.5" × 42.25" (544 mm × 723 mm × 1,070 mm)
OC-509 OT-502 DF-626 MB-506
Weight 163.25 lb./74 kg LU-202 LU-202

PK‑522 Punch Kit

FS-532 FS-532 HT-504
Applicable Finisher FS-532 HT-504
HT-506 FS-612 FS-612 RU-509
FS-531 FS-531
Hole Pitch Metric Area: 80 mm (2 holes/4 holes), 21 mm, 70 mm, 21 mm
(Swedish 4 holes)
Inch Area: 70 mm (2 holes), 108 mm (3 holes)
D-506 PB-503 PK-512/513 PK-512/513
LS-505 PK-522 SD-506
Paper Weight PB-503
60 gsm to 300 gsm

Paper Size 2-holes: A3, B4, A4, B5, 11" x 17", 9" x 11", 8.5" x 14", 8.5" x 11"
(S: Short Edge Feed L) 3-/4-holes: A3, B4, A4, B5, 11" x 17", 9" x 11", 8.5" x 11"
LC-501
Power Source Supplied from theWT-511
main unit WT
AU-201
AU
Dimensions (WxDxH) 6.25" × 23.25" × 7.25" (156 mmIC-415
× 592 mm × 180 mm)
PF-602m PF-602m EF-103
Weight 9.92 lb./4.5 PF-707
kg PF-707 EF-103
3
IC-602

SD‑510 Saddle Stitcher UK-104 LU-202

HT-511
FS-532 GP-502 HT
FS-532
Paper Size Saddle FS-532 GP-502
Stitch Center-Fold FoldUK-206
& Staple:
GP-501
(S: Short Edge Feed L) SRA3, A3, B4, A4, 13" x 19", 12" x 18", 11" x 17", 8.5" x 14", 8.5" x 11"S
Max. 330 mm x 487 mm, Min.UK-207120 mm x 240 mm
MK-732 HT-504
MK-732 Three Fold-in: A4S, 8.5" x 11"
HT-506
Fold Mode Tray Capacity Saddle Stitch (330 mm or more in length):
2 to 5 sheets: 35 sets, 6 to 10 sheets: 23 sets, 11 to 25 sheets: 15 sets
Center-Fold: 1 to 5 sheets: 35 sets
5 SD-506 PB-503 Three-Fold (less than 330 mm in length):
1-sheet fold: 50 sets, 2-sheet fold: 40 sets, 3-sheet fold: 30 sets
SD-510
SD-510
Sheets Saddle Stitch Max. 20 sheets
LC-501
Sheets Folded Center-Fold Max. 5 sheets WT-511
Three-Fold-in Max. 3 sheets
AU-201
Power Source Supplied from the main unit IC-415
EF-103
Dimensions (WxDxH) 11.07" x 23.48" x 20.86" (281 mm x 596 mm x 530 mm)
IC-602
Weight Approximately 58.25 lb./26.4 kg
UK-104
*Usable paper types will vary according to function and paper exit destination. HT-511
FS-532 FS-532 GP-502
GP-501
UK-206

MK-732 9 UK-207
Konica Minolta bizhub PRESS C71hc
Specification & Installation Guide

Component Considerations continued

PI-502 Post Inserter (Optional Mount Kit MK‑732 with FS‑532 is required.)
PI-502 OC-509 OT-502 DF-626 MB-506
Paper Type Plain, Color, Special, Coated (50 gsm to 300 gsm)

Paper Size Upper Tray: A4, B5, A5, 9" x 11", 8.5" x 11", 8.5" x 11"S

Lower Tray: SRA3, A3, B4, A4, B5, A5, 12" x 18", 11" x 17", 8.5" x 14",
8.5" x 11", 8.5" x 11"S
FS-532 FS-532
Paper Capacity (80 gsm) Max. 200 sheets
FS-61
Power Source Supplied from FinisherFS-531
FS-532 FS-531

Dimensions (WxDxH) 20.25" × 24.5" × 8.75" (511 mm x 620 mm x 220 mm)

Weight Approx. 23.5 lb./10.5 kg PK-512/513

PK-522

FD‑503 Folding Unit

Hole Pitch Metric area: 80 mm (2 holes/4 holes)
Inch area: 70 mm (2 holes), 108 mm (3 holes)

Fold Types Center-fold, Three fold-in, Three fold-out,

PF-602m PF-602m
Double parallel, Z-fold, Gatefold
FD-503 PF-707 PF-70
Paper Size Hole Punch 2 holes: SRA3, A3, B4, A4, B5, 12" x 18", 11" x 17",
(S: Short Edge Feed L) 8.5" x 14", 8.5" x 11"

3/4 holes: SRA3, A3, B4, A4, B5, 12" x 18", 11" x 17", 8.5" x 11"
Folding Mode: Max. 305 mm x 458 mm, Min. 210 mm x 279 mm
Post Insertion Mode: Max. 331 mm x 483 mm, Min. 182 mm x 139 mm
Straight Mode: Max. 330 mm x 483 mm, Min. 182 mm x 148 mm

Paper Weight Punch 50 gsm to 300 gsm

HT-504
Folding Mode Center-Fold/Three Fold-in/Three Fold-out/Z-Fold:
50 gsm to 130 gsm
Double Parallel/Gatefold: 50 gsm to 91 gsm
Post Insertion Mode: 50 gsm to 300 gsm
Straight Mode: 40 gsm to 350 gsm
Sub Tray Mode: 40 gsm to 350 gsm*2
LS-505 SD-506 PB-503
Power Source Requires own electrical outlet (5-20R).
Dimensions (WxDxH) 15.75" x 28.5" x 48.5" (400 mm*1 x 723 mm x 1,231 mm)
LC-501
Weight Approximately 285.5 lb./130 kg
*1 W
 idth including the primary (main) tray (with the edge closed): 667 mm. Width including the primary (main) tray (with the edge
pulled out): 784 mm . *2 Loading paper weight 49 gsm or less is not warranty.

EF-103

FS-532 FS-532 GP-502

GP-501

MK-732

SD-510

10
 PF-602m PF-602m
PF-707 PF-707

Konica Minolta bizhub PRESS C71hc LU-202 LU-202

Specification & Installation Guide
HT-504
HT-506
Component Considerations
SD‑506 Saddle Stitcher
SD-506 PB-503
Paper Size Saddle Stitch/Trimming: SRA3, A3, B4, A4S, 12" x 18", 11" x 17",
(S: Short Edge Feed L) 8.5" x 14", 8.5" x 11"S
LC-501
Max. 324 mm × 463 mm, Min. 182 mm × 257 mm
Folding: Center-Fold: SAR3, A3, B4, A4S, B5S, 12" x 18", 11" x 17",
8.5" x 14", 8.5" x 11" WT-511
Max. 324 mm × 463 mm, Min. 182 mmAU-201× 257 mm
ThreeEF-103
Fold-in: A4S, 8.5" x 11"S IC-415
Straight (Sub Tray): Max. 330 mm x 483 mm, Min. 100 mm x 148 mm
IC-602
Paper Weight Saddle Stitch/Trimming: 50 gsm to 244 gsm
Center-Fold: 50 gsm to 244 gsm UK-104
FS-532 FS-532 GP-502
Three Fold-in: 50 gsm to 91 gsm HT-511
Straight (Sub Tray): 40 gsm to 350 gsm*1 UK-206

Stitching Capacity Max: 50 sheets (62 gsm to 81 gsm)

MK-732 UK-207
PI-502 OC-509 OT-502 DF-626 MB-506
Trimming Capacity 50 sheets (80 gsm)

Fold Type Center-Fold, Three Fold-in

Folding Capacity Center-Fold: 30 sets

FS-532 FS-532 Three Fold-in: 20 sets
SD-510
Power Source RequiresFS-531
own electrical outlet (5-20R). FS-612 FS-612
FS-531

Max. Power Consumption 270 W

Dimensions (WxDxH) When the stack output tray closed: PK-512/513 PK

PK-522
46" x 30.5" x 40.25" (1,170 mm x 775 mm x 1,020 mm)

Weight 617.25 lb./280 kg

PB‑503 Perfect Binder

PF-602m PF-602m
FD-503 Paper Weight Body: 64 gsm to 105 gsm (81 gsm to 209 gsm for cover sheets)
PF-707 PF-707

Paper Size Body: Max. 307 mm × 221 mm, Min. 139 mm × 210 mm

(S: Short Edge Feed L) Cover Paper: Max. 307 mm × 472 mm, Min. 139 mm × 279 mm
Bound Pages (80 gsm) Approximately 300 sheets max. (less than 30mm thick)/
Approximately 10 sheets min.
Warm-up Time Approximately 20 min.
HT-504
Power Source Requires own electrical outlet (5-20R). H

Max. Power Consumption 1,000 W or less

LS-505 Dimensions
SD-506 (WxDxH) 53.5" x 30.5" x 48.25" (1,360 mm x 775 mm x 1,223 mm)
PB-503
Weight Approximately 595.25 lb./270 kg
LC-501

WT-511
AU-201
IC
EF-103

IC

U
HT-511
FS-532 FS-532 GP-502
GP-501
U

MK-732 U

11

SD-510
 FS-612 FS-612 RU-509 RU-509
FS-531 LS-505 FS-531 SD-506 PB-503

Konica Minolta bizhub PRESS C71hc

LC-501
PK-512/513 PK-512/513 IC-308

Specification & Installation Guide WT-511

AU-201
IC-415
EF-103
HM-102
IC-602
Component Considerations continued

GP-501PF-707
Multi Punch (Die Set DS-501,PF-707
DS-502, DS-503, DS-504, DS-505, and DS-506) HT-511
UK-104
FS-532 FS-532 GP-502
GP-501
Speed Up to 80 sheets per minute UK-206

Punch Sheet Size LU-202

8.5" x 11" LU-202
MK-732 UK-207
Punch Edge 11
Paper Stock 20 lb. Bond to 80 lb. Cover, Letter/A4 and Letter/A4
HT-503 Tab paper only.
HT-504
Punch Capacity HT-506 Single Sheet
Power Supply 115V, 60Hz, Single Phase; NEMA 5-20R
SD-510
Electrical BTUs/Hour 1100BTU/HR; Watts 322W; Amps 2.8A
PB-503
Safety TUV/GS, CE
Dimensions 12"(W) x 30.5"(D) x 40"(H); (305 (W) x 775 (D) x 1,020 (H) mm)
Weight WT-511 Approx. 170 lbs. (80 kg)
AU-201
Shipping Weight Approx. 270 lbs. (123 kg)
IC-415
EF-103
Power source Requires own electrical outlet (5-20R).
IC-602

UK-104
GP-502 Auto Ring Binder HT-511
532 GP-502
Sheet size UK-206 8.5" x 11"P
Bind edge UK-207
11 inches
Book size (sheets) Smallest: 5 body sheets (20 lb. Bond) + 2 covers (57 lb. Bond)
Largest: 100 body sheets (20 lb. Bond) + 2 covers (57 lb. Bond)
Paper weight Body: 20 to 32 lb. Bond
Cover: 44 to 57 lb. Bond
Tabbed paper: 44 lb. Bond max.
Bypass sheet size/weight Same as main body
Punch capacity Single sheet
Electrical 115 VAC 60 Hz, 2.2A
Safety TUV/GS, CE
Dimensions 25.7 (W) x 37.1 (D) x 41.3 (H) inches
Weight Approx. 403 lb.
Shipping weight Approx. 514 lb.

EF-103 Envelope Fuser

Envelope Weight 70 gsm to 100 gsm
Envelope Size Paper length in the 100 mm to 245 mm*
main scan direction

Paper length in the 148 mm to 375 mm

sub scan direction
Power Source Supplied from main body
Power Consumption 2430W or less
Dimensions (WxDxH) 7.87" x 27.1" x 9.25"
Weight 35.2 lb./16 kg.
* When the paper length is less than 139.7 mm, use the small size guide.

12
Konica Minolta bizhub PRESS C71hc
Specification & Installation Guide

Paper Weight Paper Trays/Exit Tray Capacity

Paper trays Paper Weight (bond) Paper Trays Capacity
Tray 1 and 2 8.5" x 11", A4 or larger: 17 to 68 lb. Tray 1 and 2 (Main 500 sheets (21 lb.)/80 gsm
(Main body trays) 5.5" x 8.5", B5 or smaller: 17 to 56 lb. body trays) 1000 sheets (21 lb.)/80 gsm
Bypass Tray: 17 lb. bond to 81 lb. bond Bypass tray 250 sheets (21 lb.)/80 gsm
Tray 3 and 4 Tray 4 (Upper tray): Tray 3 and 4 6,000 sheets (21 lb.)/80 gsm
(Paper Feed Unit 17 lb. bond to 139 lb. index/256 gsm (PF‑602)
PF‑602) Tray 5 (Lower tray):
Tray 3, 4 and 5 4,630 sheets (21 lb.)/80 gsm
17 lb. bond to 81 lb. bond
(PF‑707)
Tray 3, 4 and 5 Paper Size: SRA3, A3, B4, A4, B5, A5,
Equipment Capacity
(Paper Feed Unit 13" x 19", 12" x 18", 11" x 17", 9" x 11",
PF‑707) 8.5" x 14", 8.5" x 11" Automatic Unlimited
(S: Short Edge Feed L) Max. 330.2 mm x 487.7 mm, Duplex Unit
Min. 100 mm x 140 mm*1 Output Tray OT‑502 150 sheets (21 lb.)/80 gsm
Tab paper (A4, 8.5" x 11")
Finisher FS‑531 Paper Capacity (80 gsm)
Paper Type: Plain, Fine, Color, Coated,
Non‑Sort Mode/Sort/Group Mode
Envelope*2
Max. 3,000 sheets (A4, B5, 8.5" x 11")
Paper Weight: 62 gsm to 350 gsm
Staple Mode
Max. Tray Capacity: 4,630 sheets (80 gsm)
• 2 to 9: 100 sets (Direction: 150 mm
Tray (upper / middle): 1,390 sheets
to 417 mm)/50 sets (Other)
Tray (lower tray): 1,850 sheets
• 10 to 20: 50 sets
Power Source Supplied from the main body.
• 21 to 30: 30 sets
Dimensions (WxDxH): 996 mm x 772 mm
• 31 to 40: 25 sets
x 1038 mm / 39.21" x 30.39" x 40.87"
• 41 to 50: 20 sets
Weight: 203 kg / 447.4 lb
*1 For the paper whose width is less than 140 mm, Folding Unit Secondary (Sub) tray
use the small size guide.
FD‑503 Max. 200 sheets
*2 Only lower tray supports envelopes.
Primary (Main) tray (Normal/Punch)
Equipment Paper Weight 500 sheets (21 lb.) (5.5" x 8.5", A5, B6)
Automatic 17 lb. bond to 300 gsm 2,500 sheets (8.5" x 11", 9" x 11", A4, B5)
Duplex Unit 1,500 sheets (13" x 19.2", 12" x 18",
11" x 17", 8.5" x 14", SRA3, SRA4, A3, B4)
Finisher FS‑521 Primary (Main) Tray: 13 to 81 lb.
Primary (Main) tray (Fold)
Secondary (sub) tray: 13 to 81 lb.
30 sheets (21 lb. bond)
Staple: 17 to 65 lb. (13 to 65 lb. bond using
Post Inserter Upper/Lower tray
the post inserter on the FD‑503 Folding Unit)
500 sheets (21 lb.)
Folding Unit Primary (Main) Tray: 13 to 81 lb.
Large Capacity Stacker
FD‑503 Secondary (sub) tray: 13 to 81 lb.
Stacker LS‑505 Max. 5,000 sheets (21 lb.) 13" x 19.2",
Punch: 13 to 57 lb.
12" x 18", 11" x 17", 8.5" x 14", 8.5" x 11", A3,
Z‑Fold, Tri‑Fold‑in, Tri‑Fold‑out,
B4, A4 Max. 3,000 sheets Coated paper
Half‑Fold: 13 to 35 lb.
which longer side is 380 mm or larger. Max.
Double Parallel, Gate Fold: 17 to 24 lb.
2,000 sheets (21 lb.) B5, A5
Post Inserter 13 to 81 lb. Secondary (Sub) tray
(attached to Folding Max. 200 sheets (21 lb.)
Unit FD‑503)
Large Capacity Stacker: 17 to 65 lb.
Stacker LS‑505 Secondary (sub) tray: 17 to 81 lb.
Saddle Stitcher Fold & Staple, Trimming: 17 to 65 lb.
SD‑506 Multi Half‑Fold of 5 sheets: 17 to 22 lb.
Multi Half‑Fold of 3 sheets: 23 to 35 lb.
Multi Half‑Fold of 2 sheets: 36 to 65 lb.
Multi Tri‑Fold of 5 sheets: 16 to 20 lb.
Multi Tri‑Fold of 3 sheets: 23 to 24 lb.
Secondary (sub) tray: 17 to 81 lb.
Output Tray OT‑502 13 to 166 lb. index/300 gsm
Banner Kit MK-740 128 to 256 gsm

13
Konica Minolta bizhub PRESS C71hc
Specification & Installation Guide

Paper Trays/Exit Tray Capacity (continued)

Saddle Stitcher Fold & Staple High Quality Paper Finisher FS-612 Secondary (Sub) Tray:
SD-506 (Pagination per one set) 200 sheets (21 lb. bond)
17 to 22 lb. bond: 50 sheets or Primary (Main) tray
49 sheets + 1 (53 lb./200 gsm cover) (straight delivery, offset delivery)
23 to 24 lb. bond: 30 sheets or 2,500 sheets (21 lb. bond): 8.5" x 11"L/P,
29 sheets + 1 (53 lb./200 gsm cover) A4 L/P, B5 L/P, 9" x 11"P
25 to 35 lb. bond: 20 sheets or 1,500 sheets (21 lb. bond): 12" x 18"L,
19 sheets + 1 (53 lb./200 gsm cover) 11" x 17"L, 8.5" x 14"L, A3 L, B4 L,
36 to 42 lb. bond: 15 sheets or Foolscap, SRA4 L
14 sheets + 1 (53 lb./200 gsm cover) 500 sheets (21 lb. bond): 5.5" x 8.5"L/P,
43 to 56 lb. bond: 10 sheets A5L/P, B6 L
57 to 65 lb. bond: 5 sheets Primary (Main) Tray (Staple)
Fold & Staple Coated Paper Tray capacity:
(Pagination per one set) 2-9 sheets stapled: 100 sets (paper length
17 to 21 lb. bond: 30 sheets or 417 mm or less), 50 sets (paper length
29 sheets + 1 (53 lb./200 gsm cover) 418 mm or more)
23 to 24 lb. bond: 15 sheets or 10-20 sheets stapled: 50 sets
14 sheets + 1 (53 lb./200 gsm cover) 21-30 sheets stapled: 30 sets
25 to 35 lb. bond: 10 sheets or 31-40 sheets stapled: 25 sets
9 sheets + 1 (53 lb./200 gsm cover) 41-52 sheets stapled: 20 sets
36 to 42 lb. bond: 5 sheets or Number of stapled sheets per set:
4 sheets + 1 (53 lb./200 gsm cover) 50 sheets: Plain, Fine (17 to 21 lb. bond)
Fold & Staple Saddle Stitcher Tray Capacity 30 sheets: Color Specific, Coated
2 to 10-sheet-folded set: 50 sets (17 to 21 lb. bond)
11 to 20-sheet-folded set: 30 sets 30 sheets: Plain, Fine (22 to 28 lb. bond)
21 to 40-sheet-folded set: 20 sets 16 sheets: Color Specific, Coated
41 to 50-sheet-folded set: 15 sets (22 to 28 lb. bond)
Trimming Use recommended paper for Fine, Color
Max. trimmed sheets: 50 sheets (21 lb. bond)  Specific, and Coated. The above folding
x 2, or 49 sheets (21 lb.) + 1 (53 lb./200 gsm capacity applies to sets of 5.5 mm or less
cover) x 2 in thickness. Up to two thick covers (53 lb)
Multi Half-Fold can be included in the maximum number.
3 sheets (23 to 35 lb. bond) Fold/Staple Mode Tray:
2 sheets (36 to 65 lb. bond) Number of fold & staple sheets per set:
Tray capacity: 30 sets (with full-load 20 sheets: Plain, Fine (17 to 21 lb. bond)
detection activated) 20 sheets: Color Specific, Coated
Multi Tri Fold (17 to 21 lb. bond)
Max. folded sheets: 20 sheets: Plain, Fine (22 to 28 lb. bond)
3 sheets (23 to 24 lb. bond) 16 sheets: Color Specific, Coated
Tray capacity: 20 sets (with full-load (22 to 28 lb. bond)
detection activated) Tray capacity of fold and staple:
5 sheets folded and stapled: 20 sets
(20 pages x 20 sets = 400 pages)
20 sheets folded and stapled: 5 sets
(80 pages x 5 sets = 400 pages)
Number of half-fold: 3 sheets folded
(17 to 28 lb. bond)
Tray capacity of half-fold:
3 sheets folded: 33 sets (12 pages x 33 sets
= 396 pages)
Number of tri-fold: 1 sheet (17 to 28 lb. bond)
Tray capacity of tri-fold: Approx. 50 sheets

14
Konica Minolta bizhub PRESS C71hc
Specification & Installation Guide

Paper Size
Paper Trays Available Size Folding Unit FD-503 Secondary (Sub) Tray
Standard Size: 13" x 19", 12" x 18", 11" x 17",
Trays 1 and 2 Standard Size: 12" x 18", 11" x 17", 8.5" x 14", 8.5" x 11", 5.5" x 8.5", SRA3,
(Main body trays) 8.5" x 14", 8.5" x 11", A3, B4, A4, B5 SRA4, A3, B4, A4, B5, A5, B6, A6
Available to detect SRA4, A4 or 8" x 13", Custom Size: Max. 13.03" x 19.21" (331 x
8.12" x 13.2", 8.25" x 13", 8.5" x 13" instead 488 mm) to Min. 3.94" x 5.47" (100 x 139 mm)
of 8.5" x 14", 8.5" x 11"P. Tab Paper: 8.5" x 11", A4
Available to detect SRA3 instead of 13" x 19" Primary (Main) Tray (Normal)
Available to detect A5 instead of 5.5" x 8.5" Standard Size: 13" x 19", 12" x 18", 11" x 17",
Custom Size: Max. 12.99" x 19.17" (330 x 8.5" x 14", 8.5" x 11", 5.5" x 8.5", SRA3,
487 mm) to Min. 5.51" x 7.17" (140 x 182 mm) SRA4, A3, B4, A4, B5, A5, B6: 13" x 19"
Tab Paper: 8.5" x 11", A4 and B6 are available for straight output only.
Bypass Tray Standard Size: 13" x 19", 12" x 18", Custom Size: Max. 13.03" x 19.02"
11" x 17", 8.5" x 11", SRA3, SRA4, A3, B4, (331 x 483 mm) to Min. 3.7" x 5.47"
A4, B5, B6 (95 x 139 mm)
Custom Size: Max. 12.99" x 19.17" (330 x Tab Paper: 8.5" x 11" (Only with the tab side
487 mm) to Min. 3.94" x 5.83" (100 x 148 mm) ahead in output direction).
Tab Paper: 8.5" x 11", A4 Punch (2 Holes)
Standard Size: 12" x 18", 11" x 17", 8.5" x 14",
PF-602m Standard Size: 13" x 19", 12" x 18", 8.5" x 11", 5.5" x 8.5", 9" x 11" SRA4, A3, B4,
Trays 3 and 4 11" x 17", 8.5" x 14", 8.5" x 11", 5.5" x 8.5", A4, B5, A5
PF-707 SRA3, A3, B4, SRA4, A4, B5, A5, B6 Tab Paper: 8.5" x 11", A4
Trays 3, 4 and 5 (A5 and B6 are only loaded in tray 5.) Punch (3 Holes)
(Paper Feeder Custom Size: Tray 4 (Upper tray) Max.
Standard Size: 12" x 18", 11" x 17", 8.5" x 11",
Unit trays) 12.99" x 19.17" (330 x 487 mm) to Min.
A3, B4, A4, B5, 9" x 11", Tab Paper: 8.5" x 11"
3.94" x 7.17" (100 x 182 mm) Tray 5 (Lower
Fold
tray) Max. 12.99" x 19.17" (330 x 487 mm)
Standard Size: 12" x 18", 11" x 17", 8.5" x 14",
to Min. 3.94" x 5.83" (100 x 148 mm)
8.5" x 11", SRA4, A3, B4, A4
Tab Paper: 8.5" x 11", A4
Custom Size: Max. 12.01" x 18.03"
Automatic Max. 12.99" x 19.17" (330 x 487 mm) (305 x 458 mm) to Min. 8.27" x 10.98"
Duplex Unit to min. 3.94" x 5.51" (100 x 140 mm) (210 x 279 mm)
Tab Paper: Unavailable Tab Paper: 8.5" x 11", A4
Post Inserter
Finisher FS-531 Paper Capacity (80 gsm)
Standard (detectable sizes): 13" x 19"L,
Non-Sort Mode/Sort/Group Mode
12" x 18"L, 11" x 17"L, 8.5" x 14"L,
Max. 3,000 sheets (A4, B5, 8.5" x 11")
8.5" x 11"L/P, 5.5" x 8.5"P, SRA3L, A3L,
Staple Mode
B4L, A4L/P, SRA4L/P, B5L/P, A5P,
• 2 to 9: 100 sets (Direction: 150 mm
Foolscap, Custom, Tab Paper
to 417 mm)/50 sets (Other)
Max. 13.03" x 19.02" (331 x 483 mm) to 7.17"
• 10 to 20: 50 sets
x 5.472" (102 x 139 mm).
• 21 to 30: 30 sets
Changing list of covered/sheet size detected:
• 31 to 40: 25 sets
q A5P or 5.5" x 8.5"P
• 41 to 50: 20 sets
q SRA4 w and A4, 8.5" x 14"L and
8.5" x 11"L, 8" x 13"L, 8.12" x 13.2"L,
8.25" x 13"L, or 8.5" x 13"L
q A3L or 12" x 18"L
q 8.5" x 11"P or 9" x 11"P
Perfect Binding Covers (Require same
setting made for custom sizes loaded
in PFU. Standard sizes, Tab Paper sizes,
and postcards are not supported):
Max. 12.10" x 19.02" (307 x 483 mm) to min.
7.17" x 10.98" (182 x 279 mm)

continued

15
Konica Minolta bizhub PRESS C71hc
Specification & Installation Guide

Paper Size continued

Large Capacity Stacker
Stacker LS-505 Standard Size: 13" x 19", 12" x 18",
11" x 17", 8.5" x 14", 8.5" x 11", SRA3,
SRA4, A3, B4, A4, B5, A5
Custom Size: Max. 13.03" x 19.02"
(331 x 483 mm) to Min. 8.27" x 5.83"
(210 x 148 mm), Tab paper 1-15 Tabs*
*Output sets cannot be offset when including tabbed sheets.
Secondary (Sub) Tray
Standard Size: 13" x 19", 12" x 18",
11" x 17", 8.5" x 14", 8.5" x 11", 5.5" x 8.5",
SRA3, SRA4, A3, B4, A4, B5, A5, B6, A6,
9" x 11"
Custom Size: Max. 13.03" x 19.21"
(331 x 488 mm) to Min. 3.74" x 5.47"
(95 x 139 mm), Tab Paper (Only with
the tab side ahead in output direction).

Saddle Stitcher Secondary (Sub) Tray

SD-506 Standard Size: 13" x 19", 12" x 18",
11" x 17", 8.5" x 14", 8.5" x 11", 5.5" x 8.5",
SRA3, SRA4, A3, B4, A4, B5, A5, B6, A6,
9" x 11"
Custom Size: Max. 13.03" x 19.21"
(331 x 488 mm) to Min. 3.74" x 5.47"
(95 x 139 mm), Tab Paper (Only with
the tab side ahead in output direction).
Fold & Staple/Trimming Function
12" x 18"L, 11" x 17"L, 8.5" x 14"L,
8.5" x 11"L, SRA3L, A3L, B4L, SRA4L,
A4L, B5L, Foolscap, Custom, Tab Paper
(only with the tab side ahead
in output direction)
Max. 12.76" x 18.23" (324 x 463 mm)
to min. 7.17" x 10.12" (182 x 257 mm)
Multi folding Function
Multi Half Fold: 12" x 18"L, 11" x 17"L,
8.5" x 14"L, 8.5" x 11"L, SRA3L,
A3L, B4L, SRA4L, A4L, B5L,
Foolscap, Custom Max. 12.76" x 18.23"
(324 x 463 mm) to min. 7.17" x 10.12"
(182 x 257 mm) Multi Tri‑Fold: 8.5" x 11L,
A4L
Multi-Tri-Fold Tray
Standard Size: 12" x 18", 11" x 17",
8.5" x 14", 8.5" x 11", SRA3, SRA4, A3, B4,
A4, B5
Custom size: Max. 12.76" x 18.11"
(324 x 460 mm) to Min. 7.17" x 10.12"
(182 x 257 mm)

16
Konica Minolta bizhub PRESS C71hc
Specification & Installation Guide

IC-308 Image Controller IC-415 Image Controller

Type Server Type Embedded

CPU Conforms with main unit specification CPU Conforms with main unit specification

Memory 4 GB Memory 2 GB

HDD 1 TB HDD 500GB SATA

Page-Description PostScript 3 (3019), PDF 1.7,PPML 2.2, Page-description Adobe PostScript 3 (PS3019), (PDF 1.7),
Language APPE, Adobe 2.5,PCL 5/6 emulation Language PCL 5/6 emulation

Printing Method TCP/IP, SNMP, SMB, FTP, LPR, IPP, Printing Method TCP/IP, SNMP, SMB, FTP, LPR, IPP,
Bonjour Bonjour

Applicable OS Windows XP/Vista/7/8/Server 2003/ Applicable OS Windows XP/Vista/7/8/Server 2003/

Server 2008 Server 2008*1 Server 2008*1
Mac OSX 10.5/10.6/10.7/10.8 Mac OSX 10.5/10.6/10.7/10.8

Interface 10/100/1000Base-T Scanner Resolution 200/300/400/600 dpi

Scanner Resolution 200/300/400/600 dpi Data Format PDF, TIFF, JPEG

Data Format PDF, TIFF, JPEG Driver Twain Plug-in

Driver Twain Plug-in *1 Includes 64-bit. *2 WHQL is not obtained for the PS PPD driver

*1 Including 64-bit versions.

IC-602B Image Controller

IC-309 Image Controller Type AIO to the engine (Option)

Type Server CPU Conforms with main unit specification

CPU Conforms with main unit specification Memory Max. 14 GB

Details: 2 GB + 4 GB (Standard of the main
Memory 6GB (3GB System, 3GB Image) body) + 4 GB (IC-602) + 4 GB (UK-104)
HDD 3x 1 TB Hard Disk Drives HDD Max. 2 TB
Page-Description Adobe PostScript Levels 1,2, & 3, EPS, Details: 500 GB x 3 (Standard of the main
Language PDF 1.8, PDFX-1a, PDF/X3, PDF/X4, body) + 500 GB (UK-104)
Adobe PDF/VT, JPEG (excluding Page-Description Adobe PostScript 3 (PS3019), PDF
JPEG2000), MS Office .doc; .xls; .ppt Language direct print (PDF version 1.7), TIFF direct
(via Microsoft Hot Folders), TIFF 6.0, print (TIFF version 6 compliance), PPML
TIFF/IT, PPML2.2, JDF, XPS, AFP/IPDS (version 2.2), PCL‑5c compatible, PCL XL
(with optional Trans Pack) (PCL6 version 3) compatible
Printing Method TCP/IP, SNMP, SMB, FTP, LPR, IPP Printing Method  server (IPX/SPX), LPD/LPR (TCP/IP),
P
Applicable OS Windows XP/Vista/7/8/Server 2003, IPP (TCP/IP), AppleTalk (EtherTalk),
Server 2008, Server 2013, Mac OSX Bonjour (TCP/IP), Web service printing
10.5-10.8 (TCP/IP), NPrinter/RPrinter (IPX/SPX),
Raw Port (TCP/IP), SMB
Interface Ethernet (1000 BASE-T/100 BASE-TX/
10 BASE-T) with IPv6 Applicable OS  S Plug-in
P
Windows XP/Server 2003/Vista/Server
Scanner resolution 200/300/400/600 dpi
2008/8/Server 2012*1
Mac OSX 10.5/10.6/10.7/10.8 (PPC/Intel)
PS PPD*2
Windows XP/Server 2003/Vista/Server
2008/8/Server 2012*1
Linux CUPS
Interface Ethernet (1000BASE-T/100Base‑TX/
10Base-T) with IPv6, USB
Scanner Resolution 200/300/400/600 dpi
Data Format PDF, TIFF, JPEG, XPS
Driver HDD Twain Driver,Real Time Mode Twain Driver
*1 Includes 64-bit. *2 WHQL is not obtained for the PS PPD driver.

17
Konica Minolta bizhub PRESS C71hc
Specification & Installation Guide

Security Strengthen Mode

The following items will have enhanced security.

Machine NIC Setting


While the Security Strengthen mode is activated,
available function is limited to CS Remote Care.

External Access Prohibited


No access is allowed over telephone lines other than
CS Remote Care.

Create, Save and Analyze an Audit Log


A history of security function operations will be created
and saved. Date and time, information identifying the person
who made the operation, details of the operation, and results
of the operation will be saved, enabling analysis of unauthorized
access. This log will be overwritten if the audit area is depleted

Machine Manager Authentication


A service representative will set up an authentication data
for a machine manager. The machine manager must input
a password to gain authorized access. Only one authentication
string can be registered per machine.

Machine Manager Setting Mode

If the Machine Manager Setting mode has been entered
by successful Manager authentication, the setting change
of various machine functions will be available on the machine.
Be sure to exit the Machine Manager Setting mode if you
leave in front of the machine while using the Machine Manager
Setting mode.

Enhanced Passwords
There are five different passwords provided for security
functions:
• CE Authentication Password
• Administrator Password
• User Password
• Account Password
• HDD Lock Password (when optional HD-514 Hard Disk
Kit is installed).

18
Konica Minolta bizhub PRESS C71hc
Specification & Installation Guide

Security Functions Please be sure to use the Enhanced Security mode

to prevent unauthorized access to HDD.
SECURITY MODE With the Enhanced Security mode activated, the machine
The bizhub PRESS C71hc has two security modes. displays a security icon in the lower right
area of the touch panel.
Normal Mode The security icon disappears when the Enhanced Security
mode is deactivated. If the administrator accidentally
Use this mode when the machine is used by a single
deactivates the Enhanced Security mode, contact your
person and there is low possibility of illicit access or
service representative. You should ask a customer
operation. This mode is already set as factory default.
engineer (CE) to check the security environment
To use the machine in normal mode, refer to the user's
and settings before activating the Enhanced Security
guides provided for each operation.
mode again.

Enhanced Security Mode

ENVIRONMENT
Use the Enhanced Security mode when the machine
is connected to a local area network, or to external
Environment in which the Enhanced Security
networks through a telephone line or other means. Mode is Recommended
An administrator determined for the machine
management should follow the instructions in this An environment where the machine is monitored by
guide, so that users can have a safe operating a telephone line or a network.
environment.
Creating a Secure Environment
To use the Enhanced Security mode, contact your
service representative for the following settings. For security, we recommend that supervisors and an
administrator use the Enhanced Security mode and
A service representative should set a CE password
establish an environment as follows.
for CE authentication and administrator password
on the machine. The service representative uses Secure print files and authentication print files are not
the CE password for CE works. The administrator, encrypted during transmission from a client PC to the
who obtains the administrator password from the machine. Implement measures against wiretapping,
service representative, uses that password to make such as installing a cryptographic communication
settings related to the Enhanced Security mode. device or antibugging equipment, in order to protect
secure print files and authentication print files.
The administrator should never leak the administrator
password out to others. • Qualifications to be an administrator: A supervisor
selects a reliable person who has adequate
The administrator who acquired the administrator
knowledge, technical ability, and experience as
password manages the machine set up with the
an administrator, to whom to delegate administration
Enhanced Security mode by making settings
of the machine.
in the following order:
• Guarantee of customer engineer (CE): A supervisor
1. Turning On/Off the Enhanced Security Mode or an administrator can use the Enhanced Security
2. HDD Lock Password mode after confirming that a service contract has
3. Adding/Changing/Deleting Registered Users been signed with a customer engineer (CE). Clearly
state in the service contract that the customer engineer
The administrator is also responsible in providing users
(CE) will not engage in any fraudulent actions.
with the following instructions:
continued
• Never leak his/her password out to others.
• Be sure to log out when completing the machine
operation after logging in upon the user
authentication.

19
Konica Minolta bizhub PRESS C71hc
Specification & Installation Guide

Creating a Secure Environment continued The CE password and administrator password should be
comprised of 8 alphanumeric characters (the alphabetic
• Secure LAN: Be sure to connect the machine
characters are case-sensitive).
to a local area network protected by firewall
in order to prohibit access from external networks. The account password should be made from 1 to 8
Be also sure not to have any illicit device connected alphanumeric characters (case-sensitive).
to the LAN.
The user password is normally made from 1 to 64
• An administrator should designate the installation
alphanumeric characters (case-sensitive); however,
location to be available only for product users. Install
the user password less than 8 characters cannot be
the machine in a place securely locked during the
used in the Enhanced Security mode. If you enter 64
night, and during the day in a place that allows the
or more characters, the last entered character will be
administrator to monitor the machine, so that any
identified as the 64th character.
parts such as an HOD should not get stolen or any
special device such as an internal analyzer should The HDD lock password should be made from 8 to 32
not be hooked up to the machine. Equipment alphanumeric characters (case-sensitive). If you enter
removed from the main body, such as an HOD, 32 or more characters, the last entered character will
should also be managed similar to the main body. be identified as the 32nd character.
• An administrator is required to be present at customer
As for the CE password, administrator password and
engineer (CE) works such as installation or
account password, the machine recognizes the last
maintenance.
entered character as the eighth character if 8 or more
• An administrator should check at regular intervals that 
characters are entered.
the date/time setting is correctly made on the machine.
The machine in the Enhanced Security mode also refuses
any entry for 5 seconds, if a wrong password is entered
DESCRIPTION OF ENHANCED SECURITY MODE
for one of the 5 passwords mentioned above.
Security functions will be enhanced as follows.
Should you forget any security-related password, take
action as follows depending on the type of password.
Protecting and Deleting of Remaining Data
• For a user password or account password, please
After Being Used
contact your administrator.
There are two types of Image data stored in memory • If you have forgotten the administrator password
or HDD: AHA compressed data and uncompressed or HDD lock password, please contact your service
data, which are TIFF format, PDF format, and PS representative.
data. The image area of memory or HDD with AHA
We recommend that each password should be
compressed data is released after clearing the used
changed on a regular basis in order to prevent illicit
data. In normal mode, the data is not completely
access or falsification of data.
deleted, which may allow for unauthorized reading
of the data. In Enhanced Security mode, the image
area of memory or HOD is overwritten with data Data Access
unrelated to the image before the area is released, Ensure that a user is required to enter an enhanced
irrespective of whether the stored image data is password which has been set by the administrator,
compressed. in order to save data into the user box stored in HDD
or output the stored data.
Enhanced Passwords
There are 5 different passwords provided for security
functions.

• CE password
• Administrator Password
• User Password
• Account Password
• HDD Lock Password

20
Konica Minolta bizhub PRESS C71hc
Specification & Installation Guide

Paper Considerations
Paper Size Conversion Chart
Paper Letter Letter R Legal Tabloid Statement Statement R

Measurement 8.5" x 11" 11" x 8.5" 8.5" x 14" 11" x 17" 5.5" x 8.5" 8.5" x 5.5"

Paper Weight Conversion Chart

Caliper
 gsm bond Offset Cover Tag Index Point Bristol inches mm
60.20 16 40 22 37 33 3.2 27.4 0.0032 0.081
67.72 18 45 24 41 37 3.6 30.9 0.0036 0.092
75.20 20 50 28 46 42 3.8 34.3 0.0038 0.097
90.30 24 60 33 56 50 4.8 41.2 0.0048 0.120
105.35 28 70 39 64 58 5.8 48.1 0.0058 0.147
109.11 29 73 40 62 60 6.0 49.8 0.0060 0.152
116.63 31 81 45 73 66 6.1 53.2 0.0061 0.155
131.68 35 90 48 80 74 6.2 60.1 0.0062 0.157
135.45 36 90 50 82 75 6.8 61.8 0.0068 0.173
146.73 39 100 54 90 81 7.2 67.0 0.0072 0.183
150.50 40 100 56 93 83 7.3 68.7 0.0073 0.185
161.78 43 110 60 100 90 7.4 73.8 0.0074 0.188
165.55 44 110 61 02 92 7.6 75.5 0.0076 0.193
176.83 47 120 65 108 97 8.0 80.7 0.0078 0.198
199.41 53 135 74 122 110 9.0 91.0 0.0085 0.216
203.17 54 137 75 125 113 9.0 92.7 0.0090 0.229
218.22 58 146 80 134 120 9.5 99.6 0.0092 0.234
244.56 65 165 90 50 135 10.0 111.6 0.0095 0.241
252.08 67 170 93 156 140 10.5 115.1 0.0100 0.250
270.90 72 183 100 166 150 11.0 123.7 0.0110 0.289
285.95 76 192 105 175 158 13.0 130.5 0.0130 0.330
308.52 82 208 114 189 170 14.0 140.8 0.0140 0.356
312.00 87 220 120 200 180 15.0 142.4 0.0150 0.380
385.06 105 267 146 244 220 18.0 175.8 0.0175 0.445

21
 Konica Minolta bizhub PRESS C71hc
Specification & Installation Guide

How to Build a System for the bizhub PRESS C71hc Digital Printer
(from start to finish)

PI-502 LU-202
Post Inserter Large Capacity Paper Feed Unit

FS-532
MK-732 Finisher(Flat stitch type)
PI Paper
HT-503
Conveyance Unit
OT-502 Dehumidifier
WT-511 Heater
PK-522 Output Tray
Working
Punch Kit Table*1

PF-602m
SD-510 Large Capacity Paper Feed Unit
Saddle Stitch Unit MK-740
Banner Kit

RU-509 RU-517
FD-503 Relay Conveyance Unit Relay unit
Folding Unit

AU-201
Authentication
HT-504
Unit,
Dehumidifier
Key Counter *1
Heater

MB-506
Multi-bypass Paper Feed Unit

HM-102 RU-516
LS-505
Humidification Relay Unit MK-740
Large Capacity Stacker HT-511
Unit Banner Kit
Dehumidifier
LC-501
Heater
Large Capacity
Stacker Handcart EF-103 PF-707
Envelope Fusing Unit Large Capacity Paper Feed Unit

PI-502
Post Inserter

FS-531
Finisher
SD-506 (Flat stitch type)
HT-506
Saddle Stitch Unit
Dehumidifier
Heater

PK-512/513
Punch Kit

PB-503 PI-502 IC-415

Perfect Binding Unit Post Inserter Image
Controller IC-602B
Image
FS-612 Controller
Finisher VI-507
(Saddle stitch type) Video
Interface Kit UK-104
Upgrade Kit
PK-512/513 UK-206
Punch Kit Upgrade Kit
IC-308
Image UK-207
Controller Upgrade Kit

This product is not available for some countries or regions.

*1 The WT-511 can not be installed when you connect the PF-602m and the PF-707.

22
Konica Minolta bizhub PRESS C71hc
Specification & Installation Guide

Accessory Options for bizhub PRESS C71hc Digital Color Printer

ACCESSORIES ITEM NO. DESCRIPTION NOTES

BASE UNIT
C71hc A7V0011 C71hc Printer
PAPER SUPPLY/CABINET OPTIONS
HT-511 A5VKWY1 Heating Unit for Main Engine Conditions moist paper

HT-503 A0410Y0 Heating Unit for LU-202 Conditions moist paper

HT-504 A0410Y1 Heating Unit for PF-602 Conditions moist paper

HT-506 A1RKWY1 Heating Unit for PF-707 Conditions moist paper

LU-202 A03WWW0 Large Capacity Tray 2,500 sheet capacity (for Entry version).

PF-602m A0U4WY2 Large Capacity Paper Feed Unit 6,000 sheet capacity (2 x 3000).

PF-707 A55CWY1 Air Suction Paper Feed Unit

OUTPUT OPTIONS
FD-503 A0H0W11 Folding Unit 6 fold types (half, gate, z, double parallel, letter-in, letter-out),
2/3-hole punch, post inserter

FS-531 A2A4WY1 Finisher (Flat Stitch Type) 3,100-sheet output capacity, 50-sheet stapling.

FS-532 A4F3WY2 Finisher (Flat Stitch Type) 4,500-sheet output capacity, 100-sheet stapling

FS-612 A1TVWY1 Finisher (Saddle Stitch Type) 2,700-sheet capacity. 50-sheet stapling. 20-sheet (80 page) booklets.

HM-102 A2A3WY2 Humidification Unit Paper Humidifying Kit for both the front and back sides of the page to uniformly
make curl adjustments.

LS-505 A0H1W22 Large Capacity Stacker 5,000-sheet capacity, includes roll-away cart.

MB-506 A57WWY1 Bypass Tray

MK-740 A7XVWY1 Banner Kit For use with Bypass Tray

OT-502 A0430Y2 Output Tray Required when no finisher is attached.

PB-503 A15XW11 Perfect Binding Unit Perfect bind up to 300 sheets. 600 pages with printed and trimmed cover.

PI-502 A04HWY2 Post Inserter for FS-612/531 Provides post insertion functionality to FS-612 Booklet Finisher.

PK-512/PK-513 A04F0Y0 Punch Kit Provides 2/3-hole punch for FS-612 Booklet Finisher.

PK-522 A4AW12 Punch Kit for FS-532

RU-509 A2A2W13 Relay Unit Required on PRESS configurations that include FS-532 See configuration section.

RU-510 A4FCWY1 Relay Unit Reversing relay unit for use with GP-501

RU-516 A8AKWY1 Anti-static Relay Unit For a system with in-line finishers

RU-517 A8AWWY1 Anti-static Relay Unit For a system with no in-line finisher

SD-506 AOH2WY2 Saddle Stitch Unit Up to 50-sheets (200-pages) with face trim.

GP-501 A0N9W11 GBC Multipunch Unit Uses any of (7) optional user-swappable punch dies.
NOTE: Does not ship with any dies – must order at least 1 die set.

GP-502 A4F6W11 GBC Inline Ring Binder Punches and binds finished books in line.
NOTE: Does not ship with any binding elements – must order
RB-101 binding elements separately

EF-103 A57VW11 Envelope Fusing Unit

CONTROLLER OPTIONS
IC-308 A5UTWY1 External EFI Fiery Controller
IC-309 IC309 External Creo Controller
IC-415 A5URWY1 Bustled EFI Fiery Controller
IC-602B A5XGOY1 Internal Konica Minolta
Controller
ADDITIONAL OPTIONS
WT-511 A57UWY1 Working Table

23
Konica Minolta bizhub PRESS C71hc
Specification & Installation Guide

Accessory Options for bizhub PRESS C71hc Digital Color Printer

CONSUMABLES*
CONSUMABLE ITEM NO. DESCRIPTION YIELD
DV615C A3VX900 Developing Unit – C 1,200K
DV615M A3VX800 Developing Unit – M 1,200K
DV614Y A3VX700 Developing Unit – Y 1,200K
DV614K A3VX600 Developing Unit – K 1,200K
DU105 A5WH0Y0 Drum Unit : 460K
TN621C A3VX430 Toner – C 63K
TN621M A3VX330 Toner – M 51.5K
TN621Y A3VX230 Toner – Y 66K
TN621K A3VX130 Toner – K 67K
MS-5C 4448121 Staples (for FS-612) 5,000 x 3 pkg/case
SK-601 A4F714YH Staples (for SD-506) 5,000 x 3 pkg/case
SK-602 A4F714YK Staples (for SD-531) 5,000 x 3 pkg/case
GC-501 A080WY1 Hotmelt Glue 300 Books**
RB-101 A4F7WY1 Ring Bind —
DS-501 A0NAW11 Die Set —
DS-502 A0NCW11 Die Set —
DS-503 A0NDW11 Die Set —
DS-504 A0NEW11 Die Set —
DS-505 A0NFW11 Die Set —
DS-506 A0NGW11 Die Set —
DS-507 A0NHW11 Die Set —

* Based on 5% total coverage.

** Yield based on 100 letter-sized sheets.

24