Inventflow: Grundfos A-partner

Grundfos CR 1-8 A-FGJ-A-E-HQQE

View the pump here: https://inventflow.nl/en/grundfos-cr-1-8-a-fgj-a-e-hqqe-96537544

Contact
[email protected]
+31 (0) 546 45 80 72

Datasheet
 Qty. Description
1 CR 1-8 A-FGJ-A-E-HQQE

Note! Product picture may differ from actual product

Product No.: 96537544

Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). The pump head and
base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability,
safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via
combined DIN-ANSI-JIS flanges.

The pump is fitted with a 1-phase, fan-cooled asynchronous motor.

Further product details

Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic electro-deposition
(CED) process. CED is a high-quality dip-painting process where an electrical field around the products ensures
deposition of paint particles as a thin, well-controlled layer on the surface. An integral part of the process is a
pretreatment. The entire process consists of these elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.

Pump
A standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motor stool by
means of two coupling guards.

The pump head, pump head cover and flange for motor mounting is made in one piece. The pump head has a
combined 1/2" priming plug and vent screw.

The pump is fitted with a balanced O-ring seal unit with a rigid torque-transmission system. This seal type is
assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing, this seal type is
suitable for high-pressure applications. The cartridge construction also protects the pump shaft from possible wear
from a dynamic O-ring between pump shaft and shaft seal.
Primary seal:
• Rotating seal ring material: silicon carbide (SiC)
• Stationary seat material: silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of this material
pairing offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

Printed from Grundfos Product Centre [2021.01.015] 1/12

 The shaft seal is screwed into the pump head.
The chambers and impellers are made of stainless-steel sheet. The chambers are provided with a PTFE neck ring
offering improved sealing and high efficiency. The impellers have smooth surfaces, and the shape of the blades
ensure a high efficiency.

The base is made of cast iron. The flanges and base are cast in one piece. The outlet side of the base has a
combined drain plug and bypass valve. The pump is secured to the foundation by four bolts through the base
plate.

Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards. The motor
is flange-mounted with tapped-hole flange (FT).
Motor-mounting designation in accordance with IEC 60034-7: IM B 14 (Code I) / IM 3601 (Code II).
Electrical tolerances comply with IEC 60034.
The motor has built-in thermal protection (PTO current and temperature sensors) in accordance with IEC
60034-11 and requires no further motor protection. The protection reacts to both slow- and quick-rising
temperatures, e.g. constant overload and stalled conditions.
As the thermal protection incorporates automatic reset, the motor must be connected in a way which ensures that
the automatic reset cannot cause accidents.
Technical data

Liquid:
Pumped liquid: Water
Liquid temperature range: -20 .. 120 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³

Technical:
Pump speed on which pump data are based: 2750 rpm
Rated flow: 1.8 m³/h
Rated head: 36.9 m
Pump orientation: Vertical
Shaft seal arrangement: Single
Code for shaft seal: HQQE
Approvals on nameplate: CE, EAC,ACS
Curve tolerance: ISO9906:2012 3B

Materials:
Base: Cast iron
EN 1561 EN-GJL-200
ASTM A48-25B
Impeller: Stainless steel
EN 1.4301
AISI 304
Bearing: SIC
SIC

Installation:
Maximum ambient temperature: 40 °C
Maximum operating pressure: 25 bar

Printed from Grundfos Product Centre [2021.01.015] 2/12

 Qty. Description
Max pressure at stated temp: 25 bar / 120 °C
25 bar / -20 °C
Type of connection: DIN / ANSI / JIS
Size of inlet connection: DN 25/32
Size of outlet connection: DN 25/32
Pressure rating for connection: PN 25
Flange rating inlet: 250 lb
Flange size for motor: FT100

Electrical data:
Motor standard: IEC
Motor type: 80A
Rated power - P2: 0.55 kW
Power (P2) required by pump: 0.55 kW
Mains frequency: 50 Hz
Rated voltage: 1 x 220-230/240 V
Rated current: 4.00/3.65 A
Starting current: 280 %
Cos phi - power factor: 0.99
Rated speed: 2750 rpm
Motor efficiency at full load: 66-64 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Motor No: 85215103

Controls:
Frequency converter: NONE

Others:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 27.5 kg
Gross weight: 29.9 kg
Shipping volume: 0.08 m³
Country of origin: HU
Custom tariff no.: 84137075

Printed from Grundfos Product Centre [2021.01.015] 3/12

 96537544 CR 1-8 A-FGJ-A-E-HQQE 50 Hz
H CR 1-8, 1*230 V, 50Hz eta
[m] [%]
Pumped liquid = Water
Liquid temperature during operation = 20 °C
Density = 998.2 kg/m³

50

45 90

40 80

35 70

30 60

25 50

20 40

15 30

10 20

5 10

0 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 Q [m³/h]
P NPSH
[W] [m]
800 8

700 P1 7

600 6

500 5

400 4

P2
300 3

200 2

100 1

0 0

Printed from Grundfos Product Centre [2021.01.015] 4/12

 H CR 1-8, 1*230 V, 50Hz eta
Description Value [m] [%]
Pumped liquid = Water
General information: Liquid temperature during operation = 20 °C
Product name: CR 1-8 Density = 998.2 kg/m³
A-FGJ-A-E-HQQE 50

Product No: 96537544 45 90

EAN number: 5700397594094
Technical: 40 80
Pump speed on which pump data are 2750 rpm
based: 35 70

Rated flow: 1.8 m³/h

30 60
Rated head: 36.9 m
Maximum head: 49.2 m 25 50
Stages: 8
Impellers: 8 20 40

Number of reduced-diameter impellers: 0

15 30
Low NPSH: N
Pump orientation: Vertical 10 20
Shaft seal arrangement: Single
Code for shaft seal: HQQE 5 10

Approvals on nameplate: CE, EAC,ACS

0 0
Curve tolerance: ISO9906:2012 3B 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Q [m³/h]
Pump version: A P NPSH
[W] [m]
Model: A
700 P1 7
Materials:
Base: Cast iron 600 6
Base: EN 1561 EN-GJL-200 500 5
Base: ASTM A48-25B 400 4
Impeller: Stainless steel P2
300 3
Impeller: EN 1.4301
200 2
Impeller: AISI 304
Material code: A 100 1

Code for rubber: E 0 0

Bearing: SIC 89
35
100
1
4
x

1 X Gx
1
3.5

21/2
4 4.5
9

G 1/2 120

133
141
220
180
250

141

Bearing: SIC 133

Installation: 141

Maximum ambient temperature: 40 °C

Maximum operating pressure: 25 bar
231

Max pressure at stated temp: 25 bar / 120 °C

Max pressure at stated temp: 25 bar / -20 °C
Type of connection: DIN / ANSI / JIS 120
G 1/2 G 1/2
Size of inlet connection: DN 25/32
Size of outlet connection: DN 25/32 4 x 19 x 24.5
375

1 X G 1/2
Pressure rating for connection: PN 25
Flange rating inlet: 250 lb
140
100

Flange size for motor: FT100

20
75

Connect code: FGJ 100 35 4 x 13.5

141 89
Liquid: 250 180
220
Pumped liquid: Water
Liquid temperature range: -20 .. 120 °C
Selected liquid temperature: 20 °C
LOW VOLTAGE
Density: 998.2 kg/m³ DIRECTION OF ROTATION

Electrical data:
Motor standard: IEC
MAIN

AUX

Motor type: 80A

Rated power - P2: 0.55 kW
Power (P2) required by pump: 0.55 kW
Mains frequency: 50 Hz
L N
Rated voltage: 1 x 220-230/240 V
HIGH VOLTAGE
Rated current: 4.00/3.65 A DIRECTION OF ROTATION

Starting current: 280 %

Cos phi - power factor: 0.99
MAIN

AUX

Rated speed: 2750 rpm

Motor efficiency at full load: 66-64 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
L N

Printed from Grundfos Product Centre [2021.01.015] 5/12

 Description Value
Insulation class (IEC 85): F
Motor protec: PTO
Motor No: 85215103
Controls:
Frequency converter: NONE
Others:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 27.5 kg
Gross weight: 29.9 kg
Shipping volume: 0.08 m³
Country of origin: HU
Custom tariff no.: 84137075

Printed from Grundfos Product Centre [2021.01.015] 6/12

 96537544 CR 1-8 A-FGJ-A-E-HQQE 50 Hz
cos phi CR1-8 + 80A 0.55 kW 1*230 V, 50 Hz I
eta [A]

cos phi
I

0.8 4.0

eta

0.6 3.0

0.4 2.0

0.2 1.0

0.0 0.0
0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.60 0.65 0.70 P2 [kW]
n P1
[rpm] [kW]

2800 1.6

n
2600 1.2
P1

2400 0.8

2200 0.4

2000 0.0

Printed from Grundfos Product Centre [2021.01.015] 7/12

 96537544 CR 1-8 A-FGJ-A-E-HQQE 50 Hz

13.5
x
140

4
100

180
220
35
89
24.5
x

20
19
x
4
G 1/2

100
141

141
250
133

1 X G 1/2
G 1/2
120

75
231 375

Note! All units are in [mm] unless others are stated.

Disclaimer: This simplified dimensional drawing does not show all details.

Printed from Grundfos Product Centre [2021.01.015] 8/12

 Spare parts CR 1-8, Product No. 96537544
Produced After 1648 (production year and week number)

Pos Omschrijving Opmerking Classificatie Gegevens Onderdeelnr Aanta Eenhei

- 80 Kit, chamber stack tekst Bearing type: SILICON CARBIDE .96453491 l1 d
pcs

- 4a Chamber w. bearing cpl. 1

Vane 1
Intermediate chamber 1
Retainer for bearing 1
Guide vane 6
45 Neck ring 1
47 Bearing bush 1
65 Retainer 1
65 Retainer 1
- 4 Chamber cpl. 6
Vane 1
Intermediate chamber 1
Plate 1
Guide vane 6
45 Neck ring 1
65 Retainer 1
65 Retainer 1
- 5a Chamber cpl. 1
Vane 1
Intermediate chamber 1
45 Neck ring 1
65 Retainer 1
65 Retainer 1
- 44a Guide vane cpl. 1
Plate 1
Guide vane 6
50 Top plate 1
47a Bearing ring 1
49 Impeller cpl. 8
51 Shaft, spline, cpl. 1
64d Spacing pipe Internal diameter: 12,85 1
Outer diameter: 15,85
Length (mm): 4,50
64c Clamp, splined Internal diameter: 8,5 1
Outer diameter: 15
64a Spacing pipe 6
66 Wedge lock washer 1
67 Lock nut Thread: M8 1
- Kit, coupling 00415061 1 pcs
9 Hex socket head cap screw Designation: DIN 912 4
Length (mm): 20
Thread: M6
10a Coupling half 2
10 Shaft pin Diameter: 5 1
Length (mm): 26
- Kit, coupling guard 96505130 1 pcs
7.a Combi Slot Torx screw 4
7 Coupling guard 2
- Kit, gaskets 96455090 1 pcs
37 O-ring 2
38 O-ring 1
38 O-ring 2
109 O-ring Diameter: 22,00 1
Material type: EPDM
Thickness: 2,75
- Kit, plug 96505133 1 pcs
- 18 Air vent screw 1

Printed from Grundfos Product Centre [2021.01.015] 9/12

 Pos Omschrijving Opmerking Classificatie Gegevens Onderdeelnr Aanta Eenhei
Spindle tekst . l d
1
Plug 1
23b Spindle 1
25 Plug 1
25 Plug 1
38 O-ring 1
38 O-ring 2
38 O-ring Diameter: 16,3 1
Material type: FKM
Thickness: 2,4
38 O-ring Diameter: 16,3 2
Material type: FKM
Thickness: 2,4
- Kit, shaft seal HQQE 96455086 1 pcs
105 Shaft seal Material type: HQQE 1
- Kit, wear parts Material type: SILICON 96455095 1 pcs
CARBIDE
- 4a Chamber w. bearing cpl. 1
Vane 1
Retainer 1
Guide vane 6
4a Intermediate chamber 1
45 Neck ring 1
47 Bearing bush 1
65 Retainer for seal ring 1
65 Neck ring retainer 1
45 Neck ring 8
47a Bearing ring 1
64d Spacing pipe Internal diameter: 12,85 1
Outer diameter: 15,85
Length (mm): 4,50
64c Clamp, splined Internal diameter: 8,5 1
Outer diameter: 15
65 Neck ring retainer 8
66 Wedge lock washer 1
67 Lock nut Thread: M8 1
441 Gasket 2
b
- Motor 85900284 1 pcs
- Kit, Ball bearing 96279730 1
111 Ball bearing Designation: 6204.2Z.C3.SYN 1
111 Ball bearing 1
157 O-ring Diameter: 32 1
Material type: NBR
Thickness: 2
158 Waved washer 1
- Kit, capacitor 96279808 1
161 Capacitor 1
164 Terminal box w/gasket 1
a
164 Terminal box cover w/gasket 1
- Kit, fan 96279740 1
156 Fan 1
159 Seal ring 1
a
- Kit, fan cover 96279720 1
151 Fan cover 1
152 Pan head thread forming screw 2
- Kit, flange 96279854 1
156 Flange 1
b
159 Seal ring 1
c
184 Gasket Internal diameter: 114,80 1
Outer diameter: 121,20

Printed from Grundfos Product Centre [2021.01.015] 10/12

 Pos Omschrijving Opmerking Classificatie Gegevens Onderdeelnr Aanta Eenhei
tekst Thickness: 0,25 . l d
185 Pan head screw 4
186 Drain plug 1
- Kit, shaft seal 96279722 1
159 Seal ring 1
c
159 Seal ring 1
a
- Kit, terminal box 97654230 1
152 Pan head thread forming screw 4
152 Pan head thread forming screw 4
164 Terminal box w/gasket 1
a
173 Pan head thread forming screw Designation: COMBI TORX T25 1
173 Pan head thread forming screw Designation: COMBI TORX T25 1
176 Terminal cpl. 1
- Kit, thermal protector 96279736 1
174 Protector cpl. 1
2a Pump head 96588152 1 pcs
4a Bulk, Chamber w. bearing cpl. (3 pcs) 98371208 1 pcs
4a Bulk, Chamber w. bearing cpl. (5 pcs) 97690601 1 pcs
4a Bulk, Chamber w. bearing cpl. (5 pcs) 97690590 1 pcs
4a Bulk, Chamber w. bearing cpl. (24 pcs) 96547660 1 pcs
4a Chamber w. bearing cpl. 98371207 1 pcs
- 4 Bulk, Chamber cpl. (5 pcs) 97690020 6 pcs
45 Bulk, Neck ring (24 pcs) 96536194 1
65 Retainer 92501765 1
65 Bulk, Retainer (24 pcs) 98270018 1
65 Retainer 92501764 1
4 Bulk, Chamber cpl. (10 pcs) 96547662 6 pcs
4 Chamber cpl. 98371206 6 pcs
5a Bulk, Chamber cpl. (10 pcs) 98371205 1 pcs
5a Chamber cpl. 96588148 1 pcs
6 Base 96588146 1 pcs
7a Bulk, Combi Slot Torx screw (1000 pcs) 96886324 4 pcs
10 Bulk, Shaft pin (10 pcs) Diameter: 5 96536473 1 pcs
Length (mm): 26
18 Bulk, Air vent screw (5 pcs) 96547461 1 pcs
18 Air vent screw 95061351 1 pcs
- 25a Priming valve cpl. 96588242 1 pcs
38 Bulk, O-ring (10 pcs) 99198815 1
38 Bulk, O-ring (50 pcs) 99412727 1
25 Bulk, Plug (10 pcs) 96536013 1 pcs
26 Bulk, Staybolt (4 pcs) Length (mm): 169 96536231 4 pcs
Thread: M12
26 Staybolt Length (mm): 169 98986254 4 pcs
Thread: M12
32 Bulk, Washer (10 pcs) Designation: DIN 125 A 99883474 4 pcs
Internal diameter: 13
Outer diameter: 24
Thickness: 2,5
36 Bulk, Nut (20 pcs) Thread: M12 96620479 4 pcs
37 Bulk, O-ring (24 pcs) 96547656 2 pcs
38 Bulk, O-ring (10 pcs) 99198815 2 pcs
38 Bulk, O-ring (50 pcs) 99412727 2 pcs
44a Bulk, Guide vane cpl. (5 pcs) 96547669 1 pcs
44a Guide vane cpl. 98371221 1 pcs
47a Bulk, Bearing ring (10 pcs) 97905743 1 pcs
47a Bearing ring 96547649 1 pcs
49 Bulk, Impeller cpl. (24 pcs) 96547665 8 pcs
49 Impeller cpl. 98394397 8 pcs
51 Shaft, spline, cpl. 98368513 1 pcs
55 Outer sleeve 98811285 1 pcs
60 Formed wire spring 99935918 1 pcs

Printed from Grundfos Product Centre [2021.01.015] 11/12

 Pos Omschrijving Opmerking Classificatie Gegevens Onderdeelnr Aanta Eenhei
64c Bulk, Clamp, splined (5 pcs) tekst Internal diameter: 8,5 .98496968 l1 d
pcs
Outer diameter: 15
64a Bulk, Spacing pipe (24 pcs) 96536198 6 pcs
66 Bulk, Wedge lock washer (10 pcs) 96536157 1 pcs
67 Bulk, Lock nut (10 pcs) Thread: M8 98277008 1 pcs
105 Bulk, Shaft seal (15 pcs) Material type: HQQE 96983415 1 pcs

Printed from Grundfos Product Centre [2021.01.015] 12/12