Scribd
Upload
49 views

SS Polyester NonWoven Geotextile Tech Data Sheet 2013

This document provides the technical specifications for a range of polyester continuous filament needle punched nonwoven geotextiles with unit weights from 100-400 g/m2. It lists typical properties like thickness, tensile strength, elongation, puncture strength, tearing strength, and permeability that were tested based on various ASTM standards. Roll dimensions including width, length, and area are also provided for each product. Tolerances of 15% are noted and other specifications are available upon request.

Uploaded by

Lola Tesie
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
49 views

SS Polyester NonWoven Geotextile Tech Data Sheet 2013

This document provides the technical specifications for a range of polyester continuous filament needle punched nonwoven geotextiles with unit weights from 100-400 g/m2. It lists typical properties like thickness, tensile strength, elongation, puncture strength, tearing strength, and permeability that were tested based on various ASTM standards. Roll dimensions including width, length, and area are also provided for each product. Tolerances of 15% are noted and other specifications are available upon request.

Uploaded by

Lola Tesie
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

100% Polyester Continuous Filament Needle Punched Nonwoven Geotextile

Product Technical Data Sheet

Properties (Typical) Testing criteria Unit SS 100 SS 150 SS 200 SS 300 SS 400
Unit weight ASTM D5261 [g/m²] 100 150 200 300 400
Thickness ASTM D5199 [mm] 1.0 1.5 2.0 3.0 4.0
MD 6.6 8.9 14.2 22.0 29.8
Max. tensile strength ASTM D4595 [KN/m]
CD 4.7 8.0 11.7 18.3 24.8
MD 55 55 55 55 55
Elongation at max. tensile strength ASTM D4595 [%]
CD 60 60 60 60 60
CBR puncture strength ASTM D6241 [KN] 1.18 1.8 2.5 4.0 6.1
MD 165 250 380 580 720
Trapezoid tearing strength ASTM D4533 [N]
CD 145 235 310 465 620
Index puncture strength ASTM D4833 [N] 200 348 430 620 750
Apparent opening size ASTM D4751 [µm] 190 150 100 80 80
Vertical permeability ASTM D4491 [cm/s] 0.3 0.27 0.24 0.22 0.20
MD 400 700 1000 1500 2000
Grab tensile strength ASTM D4632 [N]
CD 300 600 800 1250 1560

Roll Dimension Unit SS 100 SS 150 SS 200 SS 300 SS 400


Width [m] 2 4 4 4 4
Length [m] 330 210 170 110 80
Area [m²] 660 840 680 440 320

*** Other specifications available upon request.

The physical properties of products represent typical average values obtained in accordance with the accepted test method at the time of manufacture and are
subject to normal manufacturing variations (+/- 15% Tolerance). They are supplied as a technical service and should not be construed as guaranteeing specific
properties of the products described or their suitability for a particular application and are subject to change without notice.

248 Romualdez St., Mandaluyong City


717-3275 to 76, 534-1813, 531-9133
0917-826-5354 [email protected]

1/2013

You might also like