Scribd
Upload
39 views

Stress Analysis Report

The stress analysis report summarizes the analysis of a scissor lift design file. A 1000N force was applied downward on the design. The results show the maximum Von Mises stress is 71.7752 MPa and minimum safety factor is 2.884. Graphs of Von Mises stress, principal stresses, displacement, and safety factor are included. The analysis was performed on November 5, 2023 by the designer INGENIERIA2 using Autodesk Inventor 2020.

Uploaded by

Rey Miranda Quispirima
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
39 views

Stress Analysis Report

The stress analysis report summarizes the analysis of a scissor lift design file. A 1000N force was applied downward on the design. The results show the maximum Von Mises stress is 71.7752 MPa and minimum safety factor is 2.884. Graphs of Von Mises stress, principal stresses, displacement, and safety factor are included. The analysis was performed on November 5, 2023 by the designer INGENIERIA2 using Autodesk Inventor 2020.

Uploaded by

Rey Miranda Quispirima
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

5/11/23, 5:33 PM Stress Analysis Report

Stress Analysis Report


Analyzed File: Elevadora tipo tijera 2.ipt
Autodesk Inventor Version: 2020 (Build 240168000, 168)
Creation Date: 11/05/2023, 17:24
Study Author: INGENIERIA2

 Project Info (iProperties)

 Summary
Author INGENIERIA2

 Project
Part Number Elevadora tipo tijera 2
Designer INGENIERIA2
Cost S/ 0.00
Date Created 11/05/2023

 Status
Design Status WorkInProgress

 Physical
Material Steel
Density 7.85 g/cm^3
Mass 22.9377 kg
Area 806585 mm^2
Volume 2922010 mm^3
x=-3.61098 mm
Center of Gravity y=4.42027 mm
z=12.646 mm
Note: Physical values could be different from Physical values used by FEA reported below.

 Static Analysis:1
General objective and settings:
Design Objective Single Point
Study Type Static Analysis
Last Modification Date 11/05/2023, 16:30
Detect and Eliminate Rigid Body Modes No

Mesh settings:
Avg. Element Size (fraction of model diameter) 0.1
Min. Element Size (fraction of avg. size) 0.2
Grading Factor 1.5
Max. Turn Angle 60 deg
Create Curved Mesh Elements Yes

 Material(s)
Name Steel
General Mass Density 7.85 g/cm^3
Yield Strength 207 MPa
file:///D:/c/Elevador tipo tijera/Elevadora tipo tijera 2.ipt Stress Analysis Report 11_05_2023.html 1/5
5/11/23, 5:33 PM Stress Analysis Report

Ultimate Tensile Strength 345 MPa


Young's Modulus 210 GPa
Stress Poisson's Ratio 0.3 ul
Shear Modulus 80.7692 GPa
Part Name(s) Elevadora tipo tijera 2.ipt

 Operating conditions
 Force:1
Load Type Force
Magnitude 1000.620 N
Vector X 0.000 N
Vector Y -1000.620 N
Vector Z 0.000 N

 Selected Face(s)

 Fixed Constraint:1
Constraint Type Fixed Constraint

 Selected Face(s)

file:///D:/c/Elevador tipo tijera/Elevadora tipo tijera 2.ipt Stress Analysis Report 11_05_2023.html 2/5
5/11/23, 5:33 PM Stress Analysis Report

 Results
  Reaction Force and Moment on Constraints
Reaction Force Reaction Moment
Constraint Name
Magnitude Component (X,Y,Z) Magnitude Component (X,Y,Z)
0N 12.6431 N m
Fixed Constraint:1 1000.62 N 1000.62 N 13.1481 N m 3.01548 N m
0N 1.98319 N m

 Result Summary
Name Minimum Maximum
Volume 2922010 mm^3
Mass 22.9377 kg
Von Mises Stress 0.0000179633 MPa 71.7752 MPa
1st Principal Stress -10.9987 MPa 82.1474 MPa
3rd Principal Stress -48.4108 MPa 10.6915 MPa
Displacement 0 mm 0.744028 mm
Safety Factor 2.884 ul 15 ul

 Figures

 Von Mises Stress

 1st Principal Stress

file:///D:/c/Elevador tipo tijera/Elevadora tipo tijera 2.ipt Stress Analysis Report 11_05_2023.html 3/5
5/11/23, 5:33 PM Stress Analysis Report

 3rd Principal Stress

 Displacement

 Safety Factor

file:///D:/c/Elevador tipo tijera/Elevadora tipo tijera 2.ipt Stress Analysis Report 11_05_2023.html 4/5
5/11/23, 5:33 PM Stress Analysis Report

D:\c\Elevador tipo tijera\Elevadora tipo tijera 2.ipt

file:///D:/c/Elevador tipo tijera/Elevadora tipo tijera 2.ipt Stress Analysis Report 11_05_2023.html 5/5

You might also like