Scribd
Upload
48 views

Activity No. 7 - Implement A Subnetted IPv6 Addressing Scheme

The document describes implementing a subnetted IPv6 addressing scheme for a network with 4 LANs connected by 2 routers. It provides an addressing table and instructions to: 1) Determine the IPv6 subnets by incrementing the starting subnet of 2001:db8:acad:00c8::/64. 2) Configure IPv6 addresses on the routers and PCs according to the table and instructions. 3) Verify IPv6 connectivity by confirming the PCs can ping each other.

Uploaded by

Sikeyyy Dela Cruz
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
48 views

Activity No. 7 - Implement A Subnetted IPv6 Addressing Scheme

The document describes implementing a subnetted IPv6 addressing scheme for a network with 4 LANs connected by 2 routers. It provides an addressing table and instructions to: 1) Determine the IPv6 subnets by incrementing the starting subnet of 2001:db8:acad:00c8::/64. 2) Configure IPv6 addresses on the routers and PCs according to the table and instructions. 3) Verify IPv6 connectivity by confirming the PCs can ping each other.

Uploaded by

Sikeyyy Dela Cruz
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ACTIVITY No.

7
ECE 306/306L – DATA COMMUNICATIONS
Name: Dela Cruz, Christian Kenneth T.
Course/Year/Section: ECE-3C
Implement a Subnetted IPv6 Addressing Scheme
Addressing Table

Link-local
Device Interface IPv6 Address
Address

R1 G0/0 2001:db8:acad:00c8::1/64 fe80::1


R1 G0/1 2001:db8:acad:00c9::1/64 fe80::1
R1 S0/0/0 2001:db8:acad:00cc::1/64 fe80::1
R2 G0/0 2001:db8:acad:00ca::1/64 fe80::2
R2 G0/1 2001:db8:acad:00cb::1/64 fe80::2
R2 S0/0/0 2001:db8:acad:00cc::2/64 fe80::2
PC1 NIC Auto Config
PC2 NIC Auto Config
PC3 NIC Auto Config
PC4 NIC Auto Config

Objectives
Step 1: Determine IPv6 subnets and addressing scheme.
Step 2: Configure IPv6 addressing on routers and PCs.
Step 3: Verify IPv6 connectivity.

Background / Scenario
Network administrators must know how to implement IPv6 in their networks. You have been asked to
set up a network for use by the sales staff for a customer demonstration. The network will use a
series of consecutive IPv6 subnets for four LANs. Your job is to assign the subnets to the LANs and
configure the routers and PCs with IPv6 addressing. Make certain to configure all the necessary
components for IPv6 routing on the routers.

Instructions
Step 1: Determine IPv6 subnets and addressing scheme.
You have been given the IPv6 subnet 2001:db8:acad:00c8::/64 as the starting subnet. You will need
four more subnets for each network that is required. Increment the subnet addresses consecutively
by one to arrive at the four required subnets. Complete the table below.
Subnet Table

Subnet Address

R1 G0/0/ LAN 2001:db8:acad:00c8::0/64


R1 G0/1 LAN 2001:db8:acad:00c9::0/64
R2 G0/0 LAN 2001:db8:acad:00ca::0/64
R2 G0/1 LAN 2001:db8:acad:00cb::0/64
R1 to R2 link network 2001:db8:acad:00cc::0/64

Step 2: Configure IPv6 addressing on routers and PCs.


Complete the addressing table above to use as a guide for configuring the devices.
• Assign the first IP address in the subnet to the router LAN interfaces.
• Assign the link-local addresses as designated in the addressing table.
• For the connection between the routers, assign the first address in the subnet to R1.
• For the connection between the routers, assign the second address in the subnet to R2.
• Set all four hosts to automatically configure with IPv6 addresses.

Step 3: Verify IPv6 connectivity.


The PCs should be able to ping each other if addressing has been configured properly.
End of document

You might also like