S.NO. CODE NO.

DESCRIPTION OF WORK QUANTITY UNITS RATE AMOUNT

1 EARTH WORK

Surface dressing of the ground including removing

vegetation and making up undulations and in-equalities
not exceeding 15 cms in depth/ height including disposal
1.2 287.10 sqm 7.2 2067
of rubbish upto 1.5 m lift and lead upto 50m (at least 5m
away from the dressed area).

Excavation for all types and sizes of foundations, trenches and

drains or for any other purpose including disposal of
1.1 excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m
away from the excavated area), including dressing and leveling
of pits.
1.1.1 In all types of soils. 174.240 CUM 185 32234
Providing and filling in plinth with sand/ Crusher dust and
hard moorum under floor in layers not exceeding 20cm in
1.18 241.524 cum 371 89605
depth consolidating each deposited layer by ramming and
watering, including dressing etc.complete

2 CEMENT CONCRETE (P.C.C & R.C.C.)

Providing and laying nominal mix plain cement concrete with
3.1 crushed stone aggregate using concrete mixer in all works upto
plinth level excluding cost of form work.
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate
3.1.3 8.712 cum 2970.00 25875
40mm nominal size)
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate
40mm
3.1.4 12.554 cum 3552.00 44592
nominal size).

Providing and laying design mix reinforced cement concrete

with crushed graded stone aggregate 20mm nominal size using
3.3
batching plant, transit mixer and concrete pump, in all works
upto plinth level excluding cost of form work.
3.3.2 M-25 Grade 73.150 cum 4298 314399
Extra for laying PCC/RCC of any grade in superstructure
3.4 36.916 cum 97.5 3599
above plinth
Providing and laying damp proof course (upto 50mm thick)
3.13 2.268 CUM 4237 9610
with plain
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
crushed
Applying a coat of hot bitumen VG-10 using @ 1.7kg/ sqm on
3.15 32.13 SQM 93.5 3004
damp proof
course after cleaning the surface with brushes and finally with
a piece of cloth lightly soaked in kerosens oil

3 REINFORCEMENT
Providing and placing in position reinforcement for R.C.C.
3.12
work including
3.12.1 Thermo-Mechanically treated bars FE -415(110 kg/cum ) 8046.5 kg 54.5 438534
 4 FORM WORK
Providing and fixing form work including centring, shuttering,
2.1
strutting,
staging, propping bracing etc. complete and including its
removal at all levels, for:
Foundations, footings, bases of columns plinth beam, curtain
2.1.1 188.30 sqm 139 26174
wall in any shape and size type of wall below plinthh level.
Window sills, anchor blocks, string course, bends, copings,
2.1.3 16.08 sqm 184 2959
bed plates and like.
2.1.8 Beams, lintels, cantilevers & walls 148.93 sqm 202 30084
Suspended floors, roofs, access platform, balconies (plain
2.1.7 117.38 sqm 235 27584
surfaces) and sheves ( cast in situ )
Columns, Pillars, Piers and likes- rectangular or square in
2.1.5 93.60 sqm 297 27799
shape
Stair cases of all types excluding spiral and folded plate type,
2.1.15 16.48 sqm 230 3790
including risers and landing

5 BRICK WORK
Brick work with modular well burnt clay bricks of crushing
7.1
strength not less
than 35 kg/sqcm and water absorption not more than 20% in
foundation and plinth in:
7.1.2 Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) 39.025 CUM 4010 156490
Half brick thick (9cm) brick masonry with modular well burnt
7.9 clay bricks of crushing strength not less than 35 kg/sqcm and
water absorption not more than 20% upto plinth level:
7.9.2 Cement Mortar 1:4 (1 cement : 4 coarse sand) 68.26 SQM 435 29693
Extra for brick work
7.6in superstructure above plinth level for every floor or part thereof in addition to rate for foundation
20.006 cum and plinth
121 2421
Extra for half brick work in superstructure above plinth level for every story or part thereof in addition
7.12 68.26 to ratesqm
for upto plinth
11 level 751

6 PLASTER WORK

11.1 Providing and making 6mm thick cement plaster of mix

11.1.1 In Cement mortar 1:3 (1 cement : 3 fine sand) 138.16 sqm 93 12849
11.2 Providing and making 12mm thick cement plaster of mix:
11.2.1 In Cement Mortar 1:3 (1 cement : 3 fine sand) 272.73 SQM 115 31364
Providing and making 15mm thick cement plaster on the rough
11.3 side of
single or half brick wall of mix
11.3.1 In cement Mortar 1:3 (1 cement : 3 fine sand) 339.93 SQM 134 45551

7 PAINTING WORK
14.5 White washing with lime to give an even shade
14.5.1 On new work (Three or more coats) 750.82 SQM 9.4 7058
Providing and applying plaster of paris putty over plastered
14.1 wall surface
including scaffolding complete
upto 2 mm thickness to make surface even and smooth in
14.1.2 750.82 SQM 93.5 70202
line and level
 Applying one coat of cement primer on wall surface (applied
14.12 @ 0.80 750.82 SQM 23 17269
litrs/10 sqm) complete
Wall painting with acrylic luxury emulsion (plastic) paint of
14.11 required shade
to give an even shade
14.11.1 On new work (two or more coats) 550.38 SQM 52.5 28895
Painting exterior surface with PREMIUM ACRYLIC
SMOOTH exterior
paint of required shade as per manufacturer's specifications to
14.16 give
protective and decorative finish including cleaning washing of
surface etc.
complete with
On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm
over and
14.16.1 200.44 SQM 74.5 14933
including priming coat of exterior primer applied @ 2.20 kg/
10 sqm)

8 WOOD WORK
Providing wood work in frames of doors, windows, clerestory
8.1 windows and other frames wrought framed and fixed in
position.
8.1.2 Sal, bijasal, benteak, khair, haldu 0.732 CUM 61051 44689
Providing and fixing 40mm thick paneled or glazed or paneled
and glazed shutter frames for doors excluding hinges and
8.6
paneling. (Area of shutter to be measured without deducting
paneling area)
8.6.2 Bijasal, benteak, khair, haldu 26.61 sqm 1768 47046
Providing and fixing bright finished brass sliding door bolt
8.60
with nuts and brass polished MS screws complete
8.60.1 300x16mm 16 each 475.00 7600
Providing and fixing bright finished brass door handles with
8.65
brass polished MS screws complete
8.65.1 125 mm 34 each 55.50 1887
Providing and fixing bright finished brass tower bolts (barrel
8.62
type) with brass polished MS screws complete
8.62.1 250x10mm 31 each 276.00 8556
Providing and fixing 150mm bright finished brass floor door
8.73 13 each 73.000 949
stopper with
rubber cushion & brass polished MS screws etc complete to
suit the shutter thickness
Providing and fixing magnetic catcher in cupboard / ward robe
8.145
shutters including fixing with necessary screws etc. complete
8.145.1 Triple strip vertical type 17 each 21.00 357
Providing and fixing bright finished brass butt hinges with
8.58
brass polished MS screws complete
8.58.1 125x85x5.50 mm (Heavy Type) 52 each 245.00 12740
Providing and fixing bright finished brass hard drawn hooks &
8.74
eyes with brass polished MS screws etc complete.
8.74.1 300 mm 4 each 84.00 336
9 STEEL & ALUMINIUM WORK
Providing and fixing M.S. grill of approved pattern made of
M.S. flats or square or round bars welded to steel frame of
9.15 windows etc. including applying a priming coat welded to 279.46 kg 67.5 18864
frame with all necessary fitting complete including applying a
priming of red oxide zinc chromate primer.
Providing and fixing tinted glass panes with steel glazing clips
9.24 and special metal sash putty of approved make in steel doors,
windows, ventilators:
9.24.3 6 mm thick 21.6 sqm 923 19937
Providing and fixing stainless wire gauge of average width of
aperture 1.56mm with wire of 0.35mm to existing steel door,
9.34 10.8 sqm 791 8543
window shutter frames with necessary M.S. strip beading etc.
complete.
Providing and fixing aluminium work for doors, windows,
ventilators and partitions made out of extruded aluminium
standard sections (main section with minimum 1.5mm
thickness) conforming to IS: 733, IS: 1285 mitred and jointed
mechanically including aluminium cleats, neoprene weather
9.47 stripping gasket beveled edge beading, screws duly fixed in
wall/ floor with fixing clips or hold fasteners or bolts and nuts
as required aluminium sections shall be anodized transparent
or dyed to approved shade according to IS: 1868, minimum
anodic coating shall be of grade AC-15 (glazing to be paid for
separately)
9.47.1 For fixed portion 65.74 kg 331.00 21760
For shutter of doors, windows & ventilators including
9.47.2
providing and making
provision for fixing of fitting wherever required including the
cost of PVC/ neoprene gasket required (fittings shall be paid 91.58 kg 338.00 30954
for separately ).

10 FLOORING
25 mm thick KOTA stone slab flooring over 20mm (Average)
thick base of cement mortar 1:4 laid over and jointed with grey
12.49 cement slurry mixed with pigment to match the shade of the 20.33 SQM 897 18236
slab including grinding rubbing and polishing etc. complete
(Area of slab to be over 0.20 sqm and upto 0.50 sqm)

Providing and laying vitrified floor tiles with double charge/

multi charge printing with water absorption less than 0.5% and
conforming to IS : 15622 of approved make in all colours and
12.13 shades and size mentioned below (+/- 10mm), laid on 20mm
thick cement mortar 1:4 (1 cement : 4 coarse sand) including
grouting the joints with white cement and matching pigments
etc. complete.
12.13.1 Size 600*600mm 120.74 sqm 1151 138972
 Providing and laying rectified ceramic glazed floor tiles of size
300x300mm and above conforming to IS : 15622 of approved
12.10 make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1
cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.
12.10.1 Size 300x300mm 118.88 sqm 858 101999
15 mm thick Table rubbed polished Granite stone slab in risers
and treads of steps skirting dado and pillars laid on 12mm
(Average) thick base of cement mortar 1:3 (1 cement : 3 coarse
sand) and jointed with grey cement slurry including rubbing
12.46
and polishing etc. complete (single stone is to be used for
risers and treads of steps and width of stone for skirting and
dado shall be equal to the height of skirting & dado and length
of 1.0 m).
12.46.3 Granite stone lakha red/ shahi red 28.92 sqm 4273 123575
12.44 Extra for nosing in Granite stone for treads. 41.53 sqm 126 5233

11 WATER TANK
Providing and placing on terrace (at all floor levels)
polyethylene water storage tank ISI : 12701 marked with cover
19.42 and suitable locking arrangement and making necessary holes 1000 LTR. 7.3 7300
for inlet, outlet and overflow pipes but without fittings and the
base support for tank
12 50 MM PIPE
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply
including all CPVC plain & brass threaded fittings. This
19.6
included jointing of pipes & fittings with one step CPVC
solvent cement, trenching, refilling & testing of joints
complete
19.6.6 50 mm nominal outer dia pipes 13 M 476 6188
13 40 MM PIPE
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply
including all CPVC plain & brass threaded fittings i/c fixing the
19.4 pipe with clamps at 1.00 m spacing. This includes jointing of
pipes & fittings with one step CPVC solvent cement and
testing of joints complete as per direction of Engineer in
Charge.
19.4.5 40 mm nominal outer dia .Pipes. 11.2 M 362 4054

14 25 MM PIPE
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply
including all CPVC plain & brass threaded fittings i/c fixing the
pipe with clamps at 1.00 m spacing. This includes jointing of
19.5
pipes & fittings with one step CPVC solvent cement and the
cost of cutting chases and making good the same including
testing of joints complete as per direction of Engineer in
Charge.
19.5.3 25 mm nominal outer dia .Pipes. 12 M 213 2556
15 20 MM PIPE
 19.5.2 20 mm nominal outer dia .Pipes. 15 M 167 2505

16 75 MM PIPE
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)
pipes, having thermal stability for hot & cold water supply
including all CPVC plain & brass threaded fittings. This
19.6
included jointing of pipes & fittings with one step CPVC
solvent cement, trenching, refilling & testing of joints
complete
19.6.8 75 mm nominal inner dia pipes 12 M 1682 20184
17 BIB COCK
Providing and fixing 15 mm nominal bore C.P. brass fittings of
19.14 approved make and conforming to IS:8931 including C.P.
brass extension if required:
Providing and fixing 15 mm nominal bore C.P. brass fittings of
19.14.1 approved make and conforming to IS:8931 including C.P. 6 EACH 382 2292
brass extension if required:
18 ANGLE COCK
19.14.7 12 EACH 382 4584
Angle valve for basin mixer and geyser points (450 grams)

19 PILLER COCK
19.14.4 Piller Cock (400 grams) 6 EACH 398 2388
20 TWO WAY BIB COCK
19.14.5 Two way bib cock (800 grams) 4 EACH 708 2832
21 WALL MIXTURE
19.14.10 Wall mixer with elegant knob (1400 grams) 4 EACH 1787 7148
22 SHOWER
19.14.15 Shower rose (revolving type) (150mm) 4 EACH 269 1076
23 JET SPRAY
CP brass water jet to be fixed in seat cover of WC with flexible
19.14.20 4 EACH 577 2308
connection pipe
24 HEALTH FOUCET
Health foscet (hand jet) with flexible connection pipe (for
19.14.19 4 EACH 774 3096
WC)
25 DRAIN JALLI
Providing and fixing stainless steel drain jali of approved
19.15 10 EACH 51 510
make/quality.
26 COMMODE
Providing and fixing vitreous china water closet (European
type W.C. pan) with white ISI marked plastic seat and lid, 10
litre low level white P.V.C. flushing cistern (same colour),
18.4
conforming to IS : 7231, with all fittings and fixtures complete
including cutting and making good the
walls and floors wherever required :
18.4.1 White pedestal type 4 EACH 2882 11528
27 CISTERN
Providing and fixing 10 litre capacity P.V.C. low level flushing
18.7 cistern conforming to IS : 7231, with all fittings and fixtures
complete.
 18.7.1 White 4 EACH 729 2916
28 BASIN

18.18 Providing and fixing white vitreous china wash basin including
making all connections but excluding the cost of fittings :
18.18.1 White Size 550x450 mm 4 EACH 936 3744

29 SINK

Providing and fixing white vitreous china laboratory sink with

C.I. brackets, C.P. brass chain with rubber plug 40mm C.P
18.23
brass waste and 40mm C.P. brass trap with necessary C.P.
brass unions complete including painting of brackets, cutting
and making good the wall wherever required :
18.23.1 Size 450x300x150mm 2 EACH 2504 5008

30 WASTE PIPE
Providing and fixing flexible P.V.C. waste pipe for sink or wash
18.25
basin including P.V.C. waste fittings complete.
18.25.1 32 mm dia 6 EACH 68.5 411
31 NAHANI TRAP
Providing and fixing on wall face UV stabilized Unplasticised -
PVC moulded fittings/ accessories having 3.2mm wall
18.77 thickness for Rigid PVC pipes conforming to IS : 13592 (heavy)
jointing with seal ring conforming to IS : 5382 leaving 10 mm
gap for thermal expansion.
18.77.6 Nahani trap 110x75mm 10 EACH 90.5 905
32 P-TRAP
18.77.5 "P" trap 110mmx110mm long 4 EACH 227 908
33 WYE
18.77.2 Double "Y" with or without door
18.77.2.1 75 mm 4 EACH 129 516
34 L-BOW/TEE
18.77.1 Tee/ Tee with door/ Bend 45°/ Bend 90°
18.77.1.1 75 mm 8 EACH 113 904

TOTAL 2207478