VF5001-002.

00-14/03

The principle of F5001 Electromagnetic Flow Meter is based on Faraday's law of electromagnetic induction,
according to which the sensor converts the flow into an electrical voltage proportional to the velocity of the
flow. The processed signal will be multiplied by the pipe cross-sectional area and resulted in flow volume.

Features
F5001 Electromagnetic Flow Meter offers you cost-effective Accuracy: 0.5%, 0.3%,
flow measurement with high accuracy. Repeatability: 0.25%,
Working Temperature:
Small influence by density, viscosity, temperature, Remote Version: -4 to +248 F(-20 to 120) ) for sensor,
pressure, or conductivity of the medium, -14 to 122 F(-10 to 50 ) for transmitter
No moving parts in the measuring pipe, and not Compact Version: -14 to 149 F(-10 to 65 )
sensitive to vibration, Working Pressure: 90 to 6090psi(6 to 420bar)
Various lining material and electrode chosen for Size:1/2" to 88"(15 to 2200mm)
different medium, Humidity: (5% to 95%) RH,
SMT(surface mounted technology), Ambient Magnetic Strength: 400A/m,
Low requirement of straight pipe (5D:2D), Conductivity: 5 /cm,
IP67 for compact version ,and IP68 for remote version, Power Supply: 16 to 36V DC
SMART: low-consumption, small zero-point drift, 85 to 265V AC (50/60Hz)
self-examination, nonlinear correction, bi-directional Measuring Tube: SS304,
measurement, high reliability, Electrode Material: SS316L, Hastelloy, Titanium,
Explosion-proof: Exdeia CT4. Tantalum, Platinum/Lridium, Monel, Tungsten Carbide, etc.
Tube Lining: PTFE, Synthetic Rubber, FEP, etc.
Multiple Output Signal: Current (4 to 20)mA/(0 to 10)mA,
Frequency (1 to 5000)Hz, HART/Modbus Protocol.
Application
F5001 Electromagnetic Flow Meter offer you cost-effective flow measurement with high accuracy for a wide range
of process conditions. And it can be applied to the supply, distribution, conveyance and discharge of water and
waste water in such fields as process industry, waste water treatment, chemical industry, steel industry, mining,
pulp & paper, irrigation, power generation.

The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are currently in effect.

GPE
Otherwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed andare no longer in effect.

www.gpeus.com [email protected]
 Table 1
Model 1 2 4 5 6 7 8 9
Size Note
F5001 _ PN Power supply Lining Electrode Structure Output signal Connection
(mm)
015 1/2"(15mm)
020 3/4"(20mm)
032 1 1/4"(32mm)
040 1 1/2"(40mm)
050 2"(50mm)
065 2 1/2"(65mm)
080 3"(80mm)
100 4"(100mm)
125 5"(125mm)
150 6"(150mm)
200 8"(200mm)
250 10"(250mm)
300 12"(300mm)
X X mm(Refer to Table2)
0 90psi(6bar)
1 145psi(10bar)
2 230psi(16bar)
3 360psi(25bar)
4 580psi(40bar)
5 915psi(63bar)
6 1450psi(100bar)
7 2320psi(160bar)
8 3625psi(250bar)
9 6090psi(420bar)
A AC 85 to 265V
D DC 18 to 36V
B Battery
P PTFE
R Rubber
O Others
1 SS316L
2 HastelloyC
3 Titanium
4 Tantalum
6 Tungsten Carbide
7 Platinum/Iridium
1 Compact version (Round Transmitter(
2 Compact version (Square Transmitter(
Table 2 3 Remote Version
Size Code Size Code 4 Remote Version (IP68)
16"(400mm) 400 48"(1200mm) 121 P 4 to 20mA/Pulse
18"(450mm) 450 56"(1400mm) 141 R RS-485
20"(500mm) 500 64"(1600mm) 161 H HART
24"(600mm) 600 72"(1800mm) 181 O Others
28"(700mm) 700 80"(2000mm) 201 1 ANSI
32"(800mm) 800 88"(2200mm) 221 2 DIN
36"(900mm) 900 3 JIS
40"(1000mm) 101 4 Others

The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are currently in effect.

GPE
Otherwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed andare no longer in effect.

www.gpeus.com [email protected]