Scribd
Upload
295 views

Two Way Slab Design

This document provides design details for a two-way rectangular edge supported concrete slab using ACI coefficients. The slab has short and long spans of 16 feet and 18 feet respectively, with all sides being continuously supported. Material properties, load assumptions, and thickness calculation are presented. Moment calculations are shown for the slab under factored dead and live loads. Reinforcement requirements are determined using ACI coefficients and design equations, with rebar sizes and spacing reported.

Uploaded by

Muhammad Faisal
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
295 views

Two Way Slab Design

This document provides design details for a two-way rectangular edge supported concrete slab using ACI coefficients. The slab has short and long spans of 16 feet and 18 feet respectively, with all sides being continuously supported. Material properties, load assumptions, and thickness calculation are presented. Moment calculations are shown for the slab under factored dead and live loads. Reinforcement requirements are determined using ACI coefficients and design equations, with rebar sizes and spacing reported.

Uploaded by

Muhammad Faisal
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

TWO-WAY RECTANGULAR EDGE SUPPORTED

SLAB DESIGN USING ACI COEFFICIENTS


GENERAL INFORMATION
Project Name

con

Sub-Project Name

Engineer Name

Date

April 14, 2012

Slab No.

Location/Remarks

MIDDLE SLAB

GEOMETRY DATA
Short Span, la (ft)

16.000

Case No. (1 to 9)

Long Span, lb (ft)

18.000

Case Description

All Sides Continuous

MATERIAL DATA
f'c (ksi)
fy (ksi)

LOADING DATA

2.40

1:2:4 Conc. Mix

40.00

Grade 40 Steel

Finishes (psf)

40.00

Additional Dead Load,if any(psf)

40.00

Live Load (psf)

60.00

SLAB THICKNESS
Calc. h (in.) = Perimeter/180

Used h (min. 5 in.)

4.53

5.50

LOAD CALCULATION
Selfweight @ 12.5 psf/in.

Factored Loads

68.75

Total Dead Load (psf)

148.75

Wud (psf)

208.25

Dead Load Factor

1.40

Wul (psf)

102.00

Live Load Factor

1.70

Wu (psf)

310.25

ANALYSIS AND DESIGN CALCULATION


ACI Coefficients

m=la/lb

0.88

-ve (D+L)

+ve (D)

+ve (L)

12.00 in.

Ca

0.0570

0.0228

0.0352

da

4.50 in.

Cb

0.0346

0.0132

0.0208

db

4.25 in.

-ve Ma

4.53

(max.)

+ve Ma

2.13

As(max.)

-ve Mb

3.48

(min.)

+ve Mb

1.58

As(min.)

Moments (ft-kip/ft)

Max. Spacing of Rebars (2h)

0.0223
1.20 in.2
0.0020
0.13 in.2

11.00 in.
Area of Steel and Reinf. Spacing

Moments
(ftkip/ft)

(reqd.)

As(reqd.)
in.2

As(used)
in.2

#3-Calc.

#3-Used

-ve Ma

0.0066

0.36

0.36

3.00

3.00

6.00

6.00

+ve Ma

0.0030

0.16

0.16

8.00

8.00

14.00

11.00

-ve Mb

0.0057

0.29

0.29

4.00

4.00

8.00

8.00

+ve Mb

0.0025

0.13

0.13

10.00

10.00

18.00

11.00

Prepared by M.ANIQ,MMP

Reinf. Spacing (in.)


#4-Calc.

#4-Used

Page 1 of 1

You might also like