Scribd
Upload
70 views1 page

PH ORP 3000 Controller

The pH/ORP 3000 controller is a microprocessor-based instrument for monitoring and controlling pH and ORP levels. It has sophisticated software and is simple to use. The controller can be used in applications like water treatment, food industry, swimming pools, and more. It has features like temperature readout, calibration parameters, set points, alarms, automatic or manual temperature compensation, and min/max timing alarms. It also has electrical and mechanical features such as isolated analog outputs, dual set points, EEPROM storage, and overload protection.

Uploaded by

arkadi oikhman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
70 views1 page

PH ORP 3000 Controller

The pH/ORP 3000 controller is a microprocessor-based instrument for monitoring and controlling pH and ORP levels. It has sophisticated software and is simple to use. The controller can be used in applications like water treatment, food industry, swimming pools, and more. It has features like temperature readout, calibration parameters, set points, alarms, automatic or manual temperature compensation, and min/max timing alarms. It also has electrical and mechanical features such as isolated analog outputs, dual set points, EEPROM storage, and overload protection.

Uploaded by

arkadi oikhman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

HEFER SYSTEMS & CONTROLS LTD.

WATER & WASTE WATER TECHNOLOGIES


PROCESS ANALYTICAL EQUIPMENT

The pH/ORP 3000 controller is a micro-processor


based instrument with a very sophisticated software yet,
very simple to use.
The controller can be used in many applications such as
Water treatment, Food industry, Swimming pools,
Biotechnology, Waste water and many more.

Software features: Electrical and mechanical features:

Temperature readout. 0/20 mA or 4/20 mA programmable


Calibration parameters display. isolated output.
Set-point and alarm conditions display. Dual set-points with hysteresis, delay and
Automatic or manual Temperature min/max programmable functions.
compensation. Min/max and set points timing alarm relay.
Operating mode: automatic and manual. EEPROM parameter storage.
Automatic overload protection and reset
Extractable terminal blocks.
96X96 (1/4" DIN) housing.
Technical Specifications:

PARAMETER RANGE/UNITS/DESCRIPTION
Input pH ORP
Units/Range 0-14 +/-1000mv
Resolution 0.01 pH units 1MV
Accurity +/- 1% of the reading
Power Supply 110/220 +/- 10 %, 50/60 HZ
Inputs pH elect., Antimony, Pt 100 ORP electrode
Temp. Comp. -10 - 110 deg. C No T.C
Outputs 4 – SPDT, 5A, dry contact for control, alarm& Auto clean
Analog Output 1 – Isolated 4-20 Ma for pH or ORP
Display LCD, 1X16
Enclosure Panel mount, 96X96 housing

For choosing the electrode, please refer to the electrodes brochures.


Please choose a Pt-100/1000 T.C for this instrument.
For an IP-65 wall mount enclosure, please add the letter E at the end of the P.N.
For a splash proof – clear door, please add the letter D at the end of the P.N.

HEFER SYSTEMS & CONTROLS LTD.


Tel: 972-9-8995069 Fax: 972-9-8995112 E-mail: [email protected] Web: www.hefer.co.il

You might also like