Scribd
Upload
43 views

Manufacturing Processes Primary

The document classifies manufacturing processes into six major groups: 1) primary shaping processes which produce finished products directly from raw materials like casting, powder metallurgy, and forging, 2) secondary machining processes which further process primary products to achieve precise shapes and sizes using tools, 3) metal forming processes, 4) joining processes, 5) surface finishing processes, and 6) processes that change material properties. Primary shaping produces parts that may require further machining for finishing, like castings that are re-melted and poured into molds to create intricate shapes. Secondary machining removes unwanted material using cutting tools to produce precise dimensions and finishes on flat and cylindrical surfaces.

Uploaded by

Kodok Super
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
43 views

Manufacturing Processes Primary

The document classifies manufacturing processes into six major groups: 1) primary shaping processes which produce finished products directly from raw materials like casting, powder metallurgy, and forging, 2) secondary machining processes which further process primary products to achieve precise shapes and sizes using tools, 3) metal forming processes, 4) joining processes, 5) surface finishing processes, and 6) processes that change material properties. Primary shaping produces parts that may require further machining for finishing, like castings that are re-melted and poured into molds to create intricate shapes. Secondary machining removes unwanted material using cutting tools to produce precise dimensions and finishes on flat and cylindrical surfaces.

Uploaded by

Kodok Super
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

CLASSIFICATION OF MANUFACTURING

PROCESSES

CLASSIFICATION OF MANUFACTURING PROCESSES

CLASSIFICATION OF MANUFACTURING
PROCESSES
For producing of products materials are needed. Therefore it is therefore important to know
the  characteristics of the available engineering materials. Raw materials used manufacturing
of  products, tools, machines and equipment in factories or industries are extracted from
ores.  The ores are suitably converted the metal into a molten form by reducing or refining
processes  in foundries. This molten metal is poured into moulds for providing commercial
castings,  called ingots. Such ingots are then processed in rolling mills to obtain market form
of material supply in form of bloom, billets, slabs and rods.

These forms of material supply are  further subjected to various manufacturing processes for
getting usable metal products of different shapes and sizes in various manufacturing shops. All
these processes used in  manufacturing concern for changing the ingots into usable products
may be classified into six  major groups as primary shaping processes, secondary machining
processes, metal forming  processes, joining processes, surface finishing processes and
processes effecting change in properties. These are discussed as under.
1.7.1 Primary Shaping Processes
Primary shaping processes are manufacturing of a product from an amorphous material. Some
processes produces finish products or articles into its usual form whereas others do not, and
require
Shares further working to finish component to the desired shape and size. Castings need re-
melting of scrap and defective ingots in cupola or in some other melting furnace and
then pouring of the molten metal into sand or metallic moulds to obtain the castings. Thus
the intricate shapes can be manufactured. Typical examples of the products that are produced
by casting process are machine beds, automobile engines, carburetors, flywheels etc. The
parts produced through these processes may or may not require to under go further
operations.

Some of the important primary shaping processes is:

(1) Casting,

(2) Powder metallurgy,

(3) Plastic technology,

(4) Gas cutting,

(5) Bending and

(6) Forging.

1.7.2. Secondary or Machining Processes


As large number of components require further processing after the primary processes.
These components are subjected to one or more number of machining operations in machine
shops, to obtain the desired shape and dimensional accuracy on flat and cylindrical jobs. Thus,
the  jobs undergoing these operations are the roughly finished products received through
primary shaping processes. The process of removing the undesired or unwanted material from
the work piece or job or component to produce a required shape using a cutting tool is known
as machining.

You might also like