m

Technical Data

co
Page
No.
1 - SELF - TAPPING SCREWS
Head Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Thread, Length Tolerances and Mechanical Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Recommended Hole Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162

2 - TYPE U HAMMERDRIVE SCREWS

Head, Thread and Length Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163

d.
3 - SELF - DRILLING SCREWS
Head Dimensions, Drilling Range and Recess Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164

4 - THREAD ROLLING SCREWS FOR METAL APPLICATIONS

TAP - FIX® - METRIC. Head, Thread and Length Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
TAP - FIX® - UNIFIED. Head, Thread and Length Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166

5 - ROLLED THREAD MACHINE SCREWS

6 - SCREWS FOR PLASTIC

ol
METRIC Series - Head and Length Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
UNIFIED Series - Head and Length Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168

Plas - Fix® 45. Head, Thread and Length Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Plas - Fix® 60. Head, Thread and Length Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
169
170
pm
Plas - Tech® 30. Head, Thread and Length Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Polymate® 40. Head, Thread and Length Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Type BT Screws. Head, Thread and Length Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Type Y Screws. Head, Thread and Length Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
High - Low Screws. Head and Thread Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175

8 - RIVET BUSHES
Rivet Bushes - Round . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Rivet Bushes - Hexagon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
Rivet Bushes - Mini-sert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178

9 - SELF - CLINCHING FASTENERS

Clinch Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
://u

Clinch Flush Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

Clinch Blind Standoffs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Clinch Through Standoffs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Clinch Studs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Clinch Studs - High Strength Non Flush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182

10 - K- SERIES SETZMUTTERN
Standard Spigot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Intermediate Spigot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Long Spigot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184

11 - CD WELD STUDS
tp

Threaded - Type PT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185

Unthreaded - Type UT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Internally Threaded - Type IT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
Coarse Threaded - Type CT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186

12 - Brass Inserts for Plastic

Sonic-Fix (Unheaded and Headed) & Tech-Fix (Unheaded) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
Heat-Fix (Unheaded and Headed) & Fin-Fix (Unheaded and Headed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
Spirol-Fix (Unheaded and Headed) & Expansion-Fix (Unheaded & Headed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Thread-Fix (Unheaded and Headed) & Flow-Fix (Headed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
ht

Terms and Conditions for the Sale of Goods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191

http://upmold.com Upmold Technology Limited 159

SELF-TAPPING
SCREWS

m
TECHNICAL DATA 1
DIN 7504 SELF-DRILLING

Self Tapping Screws Self Tapping Screws

Gimlet Point Blunt Point
Gimlet point self-tapping Blunt point self-tapping screws
SCREWS

co
screws have various references have various references

Self-Tapping Screws
depending on the standard. depending on the standard.
BS 4174 referred to as Type AB BS 4174 referred to as Type B
DIN 7970 referred to as Type B DIN 7970 referred to as Type BZ
ISO 1478 referred to as Type C ISO 1478 referred to as Type F

* Max countersunk head diameters are theoretical diameters of head to

sharp corners and are the diameter to which holes should be countersunk
to enable the screwheads to fit flush with the surface.
DIN 7500 THREAD ROLLING

Manufacturing Standards for Head Tolerances

SCREWS

d.
MACHINE SCREWS
ROLLED THREAD

ol
pm
Tolerances
SCREWS FOR PLASTIC

to BS 4174
FASTENERS FOR
SHEET METAL

://u

Tolerances
to DIN 267
CD WELD STUDS

DEPTH
tp

REF
BRASS INSERTS
FOR PLASTIC

Tolerances to
ht

ISO 4759/1
TECHNICAL DATA
 SELF-TAPPING
SCREWS
m
TECHNICAL DATA 1

DIN 7504 SELF-DRILLING

Self Tapping Screws Self Tapping Screws
Gimlet Point Blunt Point
Gimlet point self-tapping Blunt point self-tapping screws

SCREWS
co
screws have various references have various references

Self-Tapping Screws
depending on the standard. depending on the standard.
BS 4174 referred to as Type AB BS 4174 referred to as Type B
DIN 7970 referred to as Type B DIN 7970 referred to as Type BZ
ISO 1478 referred to as Type C ISO 1478 referred to as Type F

DIN 7500 THREAD ROLLING

Manufacturing Standards for Thread, Length Tolerances and Mechanical Properties

SCREWS
d.

MACHINE SCREWS
ROLLED THREAD
ol
pm

SCREWS FOR PLASTIC

FASTENERS FOR
SHEET METAL
://u

CD WELD STUDS

Dimensions in Millimetres
tp

BRASS INSERTS
FOR PLASTIC
ht

TECHNICAL DATA
SELF-TAPPING
SCREWS

m
TECHNICAL DATA 1
DIN 7504 SELF-DRILLING
SCREWS

co
Self-Tapping Screws
Due to the variety of the hardness of metals and the different operating
conditions, it may be found necessary to vary these dimensions which
should be used only as a guide.
DIN 7500 THREAD ROLLING

Recommended Hole Sizes

SCREWS

d.
MACHINE SCREWS
ROLLED THREAD

ol
pm
SCREWS FOR PLASTIC
FASTENERS FOR
SHEET METAL

://u
CD WELD STUDS

tp
BRASS INSERTS
FOR PLASTIC

ht
TECHNICAL DATA
ht
tp
TECHNICAL DATA 2

Head, Thread and Length Tolerances

://u

http://upmold.com
pm
ol
Type U Hammer Drive Screws

d.
co

Upmold Technology Limited

Dimensions in Millimetres
Dimensions in Inches
Standard BS4174
Manufacturing

163
TECHNICAL DATA BRASS INSERTS CD WELD STUDS FASTENERS FOR SCREWS FOR PLASTIC ROLLED THREAD DIN 7500 THREAD ROLLING DIN 7504 SELF-DRILLING SELF-TAPPING
FOR PLASTIC SHEET METAL MACHINE SCREWS SCREWS SCREWS SCREWS
SELF-TAPPING
SCREWS

m
TECHNICAL DATA 3
DIN 7504 SELF-DRILLING
SCREWS

co
Self-Drilling Screws Manufacturing
Standard DIN 7504
DIN 7500 THREAD ROLLING

Head Dimensions, Drilling Range and Recess Sizes

SCREWS

d.
DIN 7504
DIN 7504 - N DIN 7504 - P Similar
MACHINE SCREWS

Raised Csk (80o)

ROLLED THREAD

Pan Csk (80˚) Flange

ol
pm
SCREWS FOR PLASTIC

Dimensions in Millimetres

SELF-DRILLING SCREWS
WITH WINGS AND UNDERHEAD RIBS
RECESS SIZE
METRIC

METRIC
GAUGE

GAUGE
FASTENERS FOR
SHEET METAL

C/R H SQ-DRIVE T-DRIVE DRILL DRILL

POINT LENGTH
://u

1 - T10 8 4.2 2 4.50 - 5.50 4.2 8

2 1 T15 10 4.8* 2 4.50 - 5.50 4.8* 10

2 2 T15
2 2 T20 10 4.8** 3 6.00 - 7.00 4.8** 10
2 - T25
CD WELD STUDS

12 5.5 3 7.00 - 8.00 5.5 12

3 - T27
3 - T30 14 6.3 3 8.00 - 8.00 6.3 14

4.8* - Screw Lengths under 13mm (INCL.)

4.8** - Screw Lengths over 13mm
tp
BRASS INSERTS
FOR PLASTIC

ht
TECHNICAL DATA
 SELF-TAPPING
SCREWS
m
TECHNICAL DATA 4

DIN 7504 SELF-DRILLING

SCREWS
co
Tap-Fix Screws
METRIC Series
® Thread and Heads to
DIN 7500
METRIC Series Thread Rolling Screws for Metal Applications

DIN 7500 THREAD ROLLING

Head, Thread and Length Tolerances

SCREWS
d.
Pan FORM C DIN 7985 Csk (90˚) FORM C DIN 965 Indented Washer Hex (Form D Equiv.) Socket Cap (Form E Equiv.)
HEX WASHER TOTAL DEPTH
Pozi Pozi A/F Max. Depth Max. DIA. MAX. DEPTH MAX. MAX. T-DRIVE A/F
- - - - - - - -

MACHINE SCREWS
ROLLED THREAD
ol
- - - - - - - -
5.0 1.90 6.30 2.40 - - - -
- - - - - - - -
5.5/7 2.80/3.20 8.30/8.80 3.50/4.10 7.22 4.00 T20 3.00
8 3.40 10.40 4.50 8.72 5.00 T25 4.00
10 4.00 13.00 5.20 10.22 6.00 T30 5.00
13 5.60 16.90 7.00 13.27 8.00 T40 6.00
17 7.16 22.10 9.00 16.27 10.00 T50 8.00
pm

SCREWS FOR PLASTIC

Cp

FASTENERS FOR
SHEET METAL
://u

CD WELD STUDS
tp

Dimensions in Millimetres
BRASS INSERTS
FOR PLASTIC
ht

TECHNICAL DATA

http://upmold.com Upmold Technology Limited 165

SELF-TAPPING
SCREWS

m
TECHNICAL DATA 4
DIN 7504 SELF-DRILLING
SCREWS

co
Tap-Fix Screws ®
UNIFIED Series

UNIFIED Series Thread Rolling Screws for Metal Applications

DIN 7500 THREAD ROLLING

Head, Thread and Length Tolerances

SCREWS

d.
Pan Csk (80˚)
MACHINE SCREWS

Pozi Pozi
ROLLED THREAD

ol
pm
SCREWS FOR PLASTIC

Cp
FASTENERS FOR
SHEET METAL

://u
CD WELD STUDS

tp
BRASS INSERTS
FOR PLASTIC

Dimensions in Inches
ht
TECHNICAL DATA

166 Upmold Technology Limited http://upmold.com

 SELF-TAPPING
SCREWS
m
TECHNICAL DATA 5

DIN 7504 SELF-DRILLING

SCREWS
co
Rolled Thread Machine Screws METRIC Series

DIN 7500 THREAD ROLLING

Head and Length Tolerances

SCREWS
d.
HEAD DIMENSIONS
SCREW SIZE

SCREW SIZE
PAN DIN 7985 CSK DIN 965

RECESS RECESS

MACHINE SCREWS
DIA. DEPTH DIA. DEPTH

ROLLED THREAD
ol
MAX. MAX. Pozi T-Drive MAX. REF. Pozi T-Drive
M1.6 3.20 1.42 0 T5 3.00 0.96 0 T5 M1.6
M2 4.00 1.72 1 T6 3.80 1.20 1 T6 M2
M2.5 5.00 2.12 1 T8 4.70 1.50 1 T8 M2.5
M3 6.00 2.52 1 T10 5.60 1.65 1 T10 M3
M3.5 7.00 2.82 2 T15 6.50 1.93 2 T15 M3.5
pm

SCREWS FOR PLASTIC

M4 8.00 3.25 2 T20 7.50 2.20 2 T20 M4
M5 10.00 3.95 2 T25 9.20 2.50 2 T25 M5
M6 12.00 4.75 3 T30 11.00 3.00 3 T30 M6
M8 16.00 6.15 4 T40 14.50 4.00 4 T40 M8

LENGTH TOLERANCES
SCREW SIZE

SCREW SIZE

FASTENERS FOR
SHEET METAL
NOM LENGTH MM TOL. MM
://u

4mm to 6mm ±0.25

8mm to 10mm ±0.30
12mm to 18mm ±0.35
M2 - M10

M2 - M10

20mm to 30mm ±0.40

CD WELD STUDS

35mm to 50mm ±0.50

55mm to 80mm ±1.00
85mm to 100mm ±1.15

Dimensions in Millimetres
tp

BRASS INSERTS
FOR PLASTIC
ht

TECHNICAL DATA

http://upmold.com Upmold Technology Limited 167

SELF-TAPPING
SCREWS

m
TECHNICAL DATA 5
DIN 7504 SELF-DRILLING
SCREWS

co
Rolled Thread Machine Screws UNIFIED Series
UNC
DIN 7500 THREAD ROLLING

Head and Length Tolerances

SCREWS

d.
HEAD DIMENSIONS
SCREW SIZE

SCREW SIZE
PAN ANSI B1.1 CSK ANSI B1.1

DIA. DEPTH RECESS DIA. DEPTH RECESS

MACHINE SCREWS
ROLLED THREAD

ol
MAX. MAX. Pozi MAX. REF. Pozi
2-56 0.167 0.062 1 0.172 0.051 1 2-56
4-40 0.219 0.080 1 0.225 0.067 1 4-40
6-32 0.270 0.097 2 0.279 0.083 2 6-32
8-32 0.322 0.115 2 0.332 0.100 2 8-32
10-24 0.373 0.133 2 0.385 0.116 2 10-24
1/4-20 0.492 0.175 3 0.507 0.153 3 1/4-20
pm
SCREWS FOR PLASTIC

LENGTH TOLERANCES
SCREW SIZE

SCREW SIZE

NOM LENGTH INCHES TOL. INCHES

+ .00
2-56 UNC - 1/4-20 UNC

2-56 UNC - 1/4-20 UNC

3/16” - 1”
- .03
FASTENERS FOR
SHEET METAL

+ .00
://u

1 1/8” - 1 1/4”
- .06

Dimensions in Inches
CD WELD STUDS

tp
BRASS INSERTS
FOR PLASTIC

ht
TECHNICAL DATA

168 Upmold Technology Limited http://upmold.com

 SELF-TAPPING
SCREWS
m
TECHNICAL DATA 6

DIN 7504 SELF-DRILLING

45o

SCREWS
co
Plas-Fix Screws ® METRIC Series
45˚ Thread

METRIC Series Thread Rolling Screws for Plastic Applications

DIN 7500 THREAD ROLLING

Head, Thread and Length Tolerances

SCREWS
d.
Pan Csk (90˚) Flange

MACHINE SCREWS
Pozi Pozi

ROLLED THREAD
Pozi

1
ol 1
pm

SCREWS FOR PLASTIC

6 x 2.5 10.0 3.5 2 T25 10.0 2.5 T25 12.0 2.9 T25

Typical Soft Plastics:

NYLON, ABS
Typical Hard Plastics:
POLYCARBONATE & MODIFIED PPO

FASTENERS FOR
SHEET METAL
://u

CD WELD STUDS
tp

6 x 2.5 6.06 5.91 5.95 5.80 10.6 4.55 5.05

Dimensions in Millimetres
BRASS INSERTS
FOR PLASTIC
ht

TECHNICAL DATA

http://upmold.com Upmold Technology Limited 169

SELF-TAPPING
SCREWS

m
TECHNICAL DATA 6
DIN 7504 SELF-DRILLING

60o

v
SCREWS

co
Plas-Fix Screws ® INCH Series
60˚ Thread

INCH Series Thread Rolling Screws for Plastic Applications

DIN 7500 THREAD ROLLING

Head, Thread and Length Tolerances

SCREWS

d.
Pan Csk (80˚) Flange
MACHINE SCREWS

Pozi Pozi Pozi

ROLLED THREAD

ol
pm
SCREWS FOR PLASTIC

Typical Soft Plastics:

NYLON, ACETAL, ABS
Typical Hard Plastics:
INCLUDE GLASS FILLED VARIETIES, DMC AND IN CERTAIN CASES
PHENOLICS AND SIMILAR
FASTENERS FOR
SHEET METAL

://u
CD WELD STUDS

Dimensions in Inches
tp
BRASS INSERTS
FOR PLASTIC

ht
TECHNICAL DATA

170 Upmold Technology Limited http://upmold.com

 SELF-TAPPING
SCREWS
m
TECHNICAL DATA 6

DIN 7504 SELF-DRILLING

30o

SCREWS
co
Plas-Tech 30 Screws ® METRIC Series
30˚ Thread

METRIC Series Thread Forming Screws for Plastic Applications

DIN 7500 THREAD ROLLING

Head, Thread and Length Tolerances

SCREWS
d.
METRIC SERIES HEAD DIMENSIONS
SCREW SIZE

SCREW SIZE
Pan Csk (90º) Flange

MACHINE SCREWS
ROLLED THREAD
2.2 x 0.98

2.5 x 1.12

3.0 x 1.34

3.5 x 1.57
DIA. MAX

Pozi

3.90

4.40

5.30

6.10
T-Drive

4.20

5.60

6.90
-
DEPTH MAX

Pozi

1.50

1.70

2.00

2.50
ol
T-Drive

1.60

2.10

2.30
Pozi
RECESS SIZE

2
T-Drive

T6

T7

T10

T10
Absolute
Max. Dia.
(Sharp Edge)

3.80

4.70

5.50

7.30
DEPTH
REF

1.30

1.75

2.05

2.80
RECESS SIZE

Pozi

2
T-Drive

T6

T8

T8

T15
DIA.
MAX

4.40

5.00

6.00

7.00
DEPTH
MAX

1.60

1.80

2.10

2.40
RECESS SIZE

Pozi

2
T-Drive

T6

T6

T10

T10
2.2 x 0.98

2.5 x 1.12

3.0 x 1.34

3.5 x 1.57
pm
4.0 x 1.79 7.00 7.50 2.70 2.60 2 T20 8.40 3.25 2 T20 8.00 2.50 2 T20 4.0 x 1.79

SCREWS FOR PLASTIC

5.0 x 2.24 8.80 - 3.40 - 2 T20 9.30 3.40 2 T20 10.00 3.20 2 T20 5.0 x 2.24

6.0 x 2.69 10.50 - 4.00 - 3 T25 11.30 3.80 2 T30 12.00 4.00 3 T25 6.0 x 2.69

Typical Soft Plastics:

NYLON, ABS
d1 d
Typical Hard Plastics:
POLYCARBONATE & MODIFIED PPO

FASTENERS FOR
SHEET METAL
://u

CD WELD STUDS
tp

6.0 x 2.69 6.20 6.00 3.19 4.20 4.50 4.80 5.10

Dimensions in Millimetres
BRASS INSERTS
FOR PLASTIC
ht

TECHNICAL DATA

http://upmold.com Upmold Technology Limited 171

SELF-TAPPING
SCREWS

m
TECHNICAL DATA 6
DIN 7504 SELF-DRILLING

40o

v
SCREWS

co
Polymate Screws ® METRIC Series
40˚ Twin Thread

METRIC Series Thread Forming Screws for Plastic Applications

DIN 7500 THREAD ROLLING

Head, Thread and Length Tolerances

SCREWS

d.
METRIC SERIES HEAD DIMENSIONS

SCREW SIZE
SCREW SIZE
MACHINE SCREWS

PAN CSK Flange

ROLLED THREAD

3.0 x 1.20

3.5 x 1.40
DIA. DEPTH
MAX. MAX.

5.60
6.90
7.50
2.20
2.60
2.80
Pozi
RECESS

1
2
2
T-Drive

T10
T10
T20
ol ABSOLUTE
MAX. DIA.
(Sharp
Edge)

6.00
7.00
8.00
DEPTH
REF.

1.50
1.85
2.10
RECESS
Pozi

1
2
2
T8
T15
T20
DIA. DEPTH
T-Drive MAX. MAX.

6.00
7.00
8.00
2.22
2.52
2.62
1
2
2
RECESS
Pozi T-Drive

T10
T10
T20
3.0 x 1.20

3.5 x 1.40
pm
4.0 x 1.60 4.0 x 1.60
SCREWS FOR PLASTIC

5.0 x 2.00 9.50 3.55 2 T20 10.00 2.60 2 T20 10.00 3.35 2 T20 5.0 x 2.00

6.0 x 2.40 10.80 3.95 3 T25 12.00 3.10 3 T25 12.00 4.15 3 T25 6.0 x 2.40

Typical Soft Plastics:

d1 d
NYLON, ABS
Typical Hard Plastics:
POLYCARBONATE & MODIFIED PPO
FASTENERS FOR
SHEET METAL

THREAD STANDARDS & HOLE SIZES LENGTH TOLERANCES

://u

BODY DIAMETER SUGGESTED HOLE SIZES

SCREW SIZE

NOM
NOM TOL
LENGTH
d d1 POLY POLY SIZE MM
ABS NYLON MM
MAX MIN NOM PROP CARB
UP TO 10.00
3.0 x 1.20 3.00 2.85 1.50 2.75 2.60 2.50 2.75 +0.00 / -0.80
2.5 - 5.0 10.00 to 20.00
CD WELD STUDS

3.5 x 1.40 3.50 3.35 2.00 3.35 3.15 3.05 3.35

OVER 20.00 +0.00 / -1.30
4.0 x 1.60 4.00 3.85 2.20 3.65 3.55 3.55 3.65
6.0 All lengths +0.00 / -1.30
5.0 x 2.00 5.00 4.85 2.70 4.35 4.40 4.25 4.55
6.0 x 2.40 6.00 5.85 3.70 5.35 5.20 5.80 5.35 Dimensions in Millimetres
tp

Hole sizes are shown for guidance only

BRASS INSERTS
FOR PLASTIC

ht
TECHNICAL DATA

172 Upmold Technology Limited http://upmold.com

 SELF-TAPPING
SCREWS
m
TECHNICAL DATA 6

DIN 7504 SELF-DRILLING

SCREWS
co
Type BT Thread Cutting Screws Manufacturing
Standard BS4174

* Max countersunk head diameters are theoretical diameters of head to

sharp corners and are the diameter to which holes should be countersunk
to enable the screwheads to fit flush with the surface.

DIN 7500 THREAD ROLLING

Head and Thread Dimensions and Recommended Hole Sizes

SCREWS
d.
POZI
Pan Flange Csk (80˚)

MACHINE SCREWS
ROLLED THREAD
ol Dimensions in Millimetres
pm

SCREWS FOR PLASTIC

FASTENERS FOR
SHEET METAL
://u

CD WELD STUDS
tp

BRASS INSERTS
FOR PLASTIC

Dimensions in Millimetres
ht

TECHNICAL DATA

http://upmold.com Upmold Technology Limited 173

SELF-TAPPING
SCREWS

m
TECHNICAL DATA 6
DIN 7504 SELF-DRILLING
SCREWS

co
Type Y Thread Cutting Screws Manufacturing
Standard BS4174

* Max countersunk head diameters are theoretical diameters of head to

sharp corners and are the diameter to which holes should be countersunk
to enable the screwheads to fit flush with the surface.
DIN 7500 THREAD ROLLING

Head and Thread Dimensions and Recommended Hole Sizes

SCREWS

d.
POZI
Pan Flange Csk (80˚)
MACHINE SCREWS
ROLLED THREAD

ol Dimensions in Millimetres
pm
SCREWS FOR PLASTIC
FASTENERS FOR
SHEET METAL

://u
CD WELD STUDS

tp
BRASS INSERTS
FOR PLASTIC

ht
TECHNICAL DATA

174 Upmold Technology Limited http://upmold.com

 SELF-TAPPING
SCREWS
m
TECHNICAL DATA 6

DIN 7504 SELF-DRILLING

SCREWS
co
High-Low Threadforming Screws
* Countersunk head diameters are theoretical diameters of head to sharp
corners and are the diameter to which holes should be countersunk to
enable the screwheads to fit flush with the surface.

DIN 7500 THREAD ROLLING

Head and Thread Dimensions and Recommended Hole Sizes

SCREWS
d.
POZI
Pan Flange Csk (80˚)

MACHINE SCREWS
ROLLED THREAD
ol
pm

SCREWS FOR PLASTIC

N.B. As there are no BS Standards for HIGH-LOW head sizes,
they are generally offered 1 diameter smaller than self-
Tolerances to DIN 267
tapping screws. However, this should be checked prior to Dimensions in Millimetres
ordering if this factor is important.

FASTENERS FOR
SHEET METAL
://u

CD WELD STUDS

Dimensions in Millimetres
tp

BRASS INSERTS
FOR PLASTIC
ht

TECHNICAL DATA

http://upmold.com Upmold Technology Limited 175

SELF-TAPPING
SCREWS

m
TECHNICAL DATA 8
DIN 7504 SELF-DRILLING
SCREWS

co
Rivet Bushes B A

C
DIN 7500 THREAD ROLLING

Round
SCREWS

d.
Technical Data
METRIC M2.5 M3 M3.5 M4 M5 M6 M8 M10 M12

BSW/F - 1/8” - 5/32” 3/16” 1/4” 5/16” 3/8” 1/2”

Thread Form Range BA 8 6,5 4 3 2 0 - - -
MACHINE SCREWS
ROLLED THREAD

ol
UNC 2 4 6 8 10 1/4” 5/16” 3/8” 1/2”
UNF 2 4 6 8 10 1/4” 5/16” 3/8” 1/2”

Diameter of spigot METRIC 5.54 5.54 6.73 6.73 7.92 9.52 12.70 15.87 19.05
A
+ 0.00mm - 0.13mm IMPERIAL .218 .218 .265 .265 .312 .375 .500 .625 .750

Diameter of body METRIC 7.92 7.92 9.52 9.52 11.10 12.70 15.87 19.05 25.40
B
pm
+/- 0.13mm
SCREWS FOR PLASTIC

IMPERIAL .312 .312 .375 .375 .437 .500 .625 .750 1.000

Depth of body METRIC 3.17 3.17 3.17 3.17 3.81 5.08 6.35 7.62 10.16
C
+ / - 0.13mm IMPERIAL .125 .125 .125 .125 .150 .200 .250 .300 .400

Recommended hole size METRIC 5.54 5.54 6.73 6.73 7.92 9.52 12.70 15.87 19.05
+ 0.05mm - 0.00mm IMPERIAL .218 .218 .265 .265 .312 .375 .500 .625 .750

Test Results*
FASTENERS FOR

Torsional Resistance in ‘Nm’ (Newton Meters) Pull Out in ‘N’ (Newtons)

SHEET METAL

1.0mm 1.2mm 1.5/1.6mm 2.0mm 2.5mm 3.0mm 1.0mm 1.2mm 1.5/1.6mm 2.0mm 2.5mm 3.0mm
(20swg) (18swg) (16swg) (14swg) (12swg) (10swg) (20swg) (18swg) (16swg) (14swg) (12swg) (10swg)
://u

M3 3.2 3.9 4.4 4.7 5.6 6.9 1649 1730 1741 1810 1950 2021
M4 7.0 7.9 8.4 9.8 9.4 9.6 2610 2716 2841 3250 3271 2124
M5 9.2 10.4 11.6 13.0 16.0 17.2 3620 3551 3829 4210 4310 4400
M6 16.2 16.8 18.9 24.2 25.4 28.3 3944 4418 4715 5230 5145 5010
M8 25.4 26.9 33.2 34.4 34.7 39.2 4740 4885 5374 5489 6219 6384
CD WELD STUDS

M10 32.8 38.4 41.8 42.9 45.3 48.9 4936 5245 5490 5820 6481 6539
* These tests have been conducted using steel product in cold rolled steel, in a controlled test environment. These performance figures
should be used for guidance only.

tp

How Rivet Bushes Work

Profiled
Punch
BRASS INSERTS
FOR PLASTIC

Sheet Anvil

Rivet Bushes can be installed using a variety of methods, ideally

a press incorporating a profile punch. However, they can be
ht

installed using a simple hammer and ball bearing.

TECHNICAL DATA

176 Upmold Technology Limited http://upmold.com

 SELF-TAPPING
SCREWS
m
TECHNICAL DATA 8

DIN 7504 SELF-DRILLING

SCREWS
co
Rivet Bushes B A

DIN 7500 THREAD ROLLING

Hexagon

SCREWS
d.
Technical Data
METRIC M2.5 M3 M3.5 M4 M5 M6 M8 M10 M12

BSW/F - 1/8” - 5/32” 3/16” 1/4” 5/16” 3/8” 1/2”

Thread Form Range BA 8 6,5 4 3 2 0 - - -

MACHINE SCREWS
ROLLED THREAD
Diameter of spigot
+ 0.00mm - 0.13mm

Width across flats

+/- 0.115m
A

B
olUNC

UNF

METRIC

IMPERIAL

METRIC
2
2
5.54
.218
7.92
5.54
.218
7.92
4
4
6
6
6.73
.265
7.92
8
8
6.73
.265
7.92
.312
9.52
10
10
7.92
1/4”
1/4”
9.52
.375
11.10
5/16”
5/16”
3/8”
3/8”
12.70 15.87 19.05
.500 .625
14.27 19.05 22.22
1/2”
1/2”

.750
pm

SCREWS FOR PLASTIC

IMPERIAL .312 .312 .312 .312 .375 .437 .562 .750 .875
Depth of body METRIC 3.17 3.17 3.17 3.17 3.81 5.08 6.35 7.62 10.16
+ / - 0.13mm C
IMPERIAL .125 .125 .125 .125 .150 .200 .250 .300 .400

Recommended hole size METRIC 5.54 5.54 6.73 6.73 7.92 9.52 12.70 15.87 19.05
+ 0.05mm - 0.00mm IMPERIAL .218 .218 .265 .265 .312 .375 .500 .625 .750

Test Results*

FASTENERS FOR
Torsional Resistance in ‘Nm’ (Newton Meters) Pull Out in ‘N’ (Newtons)

SHEET METAL
1.0mm 1.2mm 1.5/1.6mm 2.0mm 2.5mm 3.0mm 1.0mm 1.2mm 1.5/1.6mm 2.0mm 2.5mm 3.0mm
(20swg) (18swg) (16swg) (14swg) (12swg) (10swg) (20swg) (18swg) (16swg) (14swg) (12swg) (10swg)
://u

M3 3.1 4.0 4.2 4.8 5.6 6.8 1656 1720 1748 1822 1945 2016
M4 7.3 8.0 8.2 9.4 9.4 9.7 2640 2710 2814 3223 3287 3156
M5 9.8 10.1 11.5 13.2 15.9 17.1 3514 3584 3820 4199 4208 4357
M6 16.1 17.0 19.2 23.9 25.6 28.4 3920 4425 4690 5210 5120 5040
M8 25.9 27.1 34.0 34.6 35.1 38.9 4710 4916 5360 5480 6210 6387
CD WELD STUDS

M10 32.3 37.2 42.3 43.8 44.8 49.8 4982 5210 5560 5810 6490 6538
* These tests have been conducted using steel product in cold rolled steel, in a controlled test environment. These performance figures
should be used for guidance only.
tp

How Rivet Bushes Work

Profiled
Punch
BRASS INSERTS
FOR PLASTIC

Sheet Anvil

Rivet Bushes can be installed using a variety of methods, ideally

a press incorporating a profile punch. However, they can be
ht

installed using a simple hammer and ball bearing.

TECHNICAL DATA

http://upmold.com Upmold Technology Limited 177

SELF-TAPPING
SCREWS

m
TECHNICAL DATA 8
DIN 7504 SELF-DRILLING
SCREWS

co
Rivet Bushes B A

C
DIN 7500 THREAD ROLLING

Round - Mini-sert
SCREWS

d.
Technical Data
METRIC M2 M2.5 M3 M3.5 M4 M5 M6 M8 M10 M12

BSW/F - - 1/8” - 5/32” 3/16” 1/4” 5/16” 3/8” 1/2”

Thread Form Range BA 8 - 6,5 4 3 2 0 - - -
MACHINE SCREWS
ROLLED THREAD

2 - 4 6 8 10 1/4” 5/16” 3/8” 1/2”

ol
UNC

UNF 2 - 4 6 8 10 1/4” 5/16” 3/8” 1/2”

Diameter of spigot METRIC 3.50 4.19 4.19 5.41 5.41 6.40 7.70 9.70 12.70 15.87
A
+ 0.00mm - 0.13mm IMPERIAL .138 .165 .165 .213 .213 .252 .303 .382 .500 .625

Diameter of body METRIC 5.00 5.50 5.50 7.00 7.00 8.50 10.00 12.00 16.00 19.00
B
pm
+/- 0.15mm .197 .217 .217 .276 .276 .335 .394 .472 .625 .750
SCREWS FOR PLASTIC

IMPERIAL

Depth of body METRIC 2.30 2.80 2.80 3.20 3.20 3.80 5.10 6.50 7.60 10.20
C
+ / - 0.13mm IMPERIAL .097 .110 .110 .126 .126 .150 .201 .256 .300 .400

Recommended hole size METRIC 3.50 4.19 4.19 5.41 5.41 6.40 7.70 9.70 12.70 15.87
+ 0.05mm - 0.00mm IMPERIAL .138 .165 .165 .213 .213 .252 .303 .382 .500 .625

Test Results*
FASTENERS FOR

Torsional Resistance in ‘Nm’ (Newton Meters) Pull Out in ‘N’ (Newtons)

SHEET METAL

1.0mm 1.2mm 1.5/1.6mm 2.0mm 2.5mm 3.0mm 1.0mm 1.2mm 1.5/1.6mm 2.0mm 2.5mm 3.0mm
(20swg) (18swg) (16swg) (14swg) (12swg) (10swg) (20swg) (18swg) (16swg) (14swg) (12swg) (10swg)
://u

M3 1.2 1.4 1.8 2.0 2.2 2.3 1126 1284 1592 1693 1710 1792
M4 2.6 2.9 3.4 4.0 4.4 4.6 1599 1689 1784 2004 2216 2380
M5 5.1 5.3 5.5 5.8 6.1 6.4 1902 2203 2428 2607 2698 2693
M6 6.7 6.8 7.9 9.6 9.6 9.8 2372 2487 2610 2692 2716 2784
CD WELD STUDS

M8 8.8 9.3 9.7 10.4 10.5 11.7 2684 2711 2792 2869 2981 3311
* These tests have been conducted using steel product in cold rolled steel, in a controlled test environment. These performance figures
should be used for guidance only.
tp

How Rivet Bushes Work

Profiled
Punch
BRASS INSERTS
FOR PLASTIC

Sheet Anvil

Rivet Bushes can be installed using a variety of methods, ideally

a press incorporating a profile punch. However, they can be
ht

installed using a simple hammer and ball bearing.

TECHNICAL DATA

178 Upmold Technology Limited http://upmold.com

 SELF-TAPPING
SCREWS
m
TECHNICAL DATA 9

DIN 7504 SELF-DRILLING

SCREWS
co
Self-Clinching Fasteners D B

h H

DIN 7500 THREAD ROLLING

Clinch Nuts

SCREWS
d.
Technical Data

Thread D B H h Minimum Rec. Hole Size Minimum Distance

Code
& Pitch Max +/- 0.2 + / 0.1 max Sheet Thickness + 0.08 - 0.00 to edge of Sheet

-0 0.77 0.8 - 1

MACHINE SCREWS
ROLLED THREAD
M2.5

ol
0.45 -1 4.22 6.3 1.5 0.97 1.0 4.25 4.8
-2 1.38 1.4
-0 0.76 0.8
M3
0.5 -1 4.22 6.3 1.5 0.97 1.0 4.25 4.8
-2 1.37 1.4
-0 0.76 0.8
M3 Alt*
0.5 -1 4.73 7.1 1.5 0.97 1.0 4.75 5.6
pm

SCREWS FOR PLASTIC

-2 1.37 1.4
Metric (dimensions in ‘mm’)

-0 0.76 0.8
M3.5
0.6 -1 4.73 7.1 1.5 0.97 1.0 4.75 5.6
-2 1.37 1.4
-0 0.76 0.8
M4
0.7 -1 5.38 7.9 2.0 0.97 1.0 5.4 6.9
-2 1.37 1.4
-0 0.76 0.8
M5
-1 6.38 8.7 2.0 0.97 1.0 6.4 7.1

FASTENERS FOR
0.8

SHEET METAL
-2 1.37 1.4
M6 -1 1.37 1.4
8.72 11.05 4.1 8.75 8.6
://u

1.0 -2 2.21 2.3

M8 -1 1.37 1.4
1.25 10.44 12.65 5.5 10.5 9.7
-2 2.21 2.3
M10 -1 2.21 2.31
1.5 13.97 17.35 7.48 14 13.5
-2 3.05 3.18
CD WELD STUDS

Steel Self Clinch Nuts are suitable for use in sheet steel with a maximum hardness of HRB80.
Stainless Steel Self Clinch Nuts are suitable for use in sheet steel with a maximum hardness of HRB70.
For Sheet Steel with a greater hardness, Rivet Bushes are recommended.

How Self-Clinching Fasteners Work

tp

Punch

Nut
BRASS INSERTS
FOR PLASTIC

Sheet Anvil

Self Clinching fasteners must be squeezed into place by applying a

constant squeezing action and not a blow (or Trauma) type force. In
ht

short, an automated press of some type must be used for installation.

TECHNICAL DATA

http://upmold.com Upmold Technology Limited 179

SELF-TAPPING
SCREWS

m
TECHNICAL DATA 9
DIN 7504 SELF-DRILLING

CODE 1 CODE 2
& ABOVE
SCREWS

co
Self-Clinching Fasteners B D D

H H
DIN 7500 THREAD ROLLING

Clinch Flush Nuts

SCREWS

d.
Technical Data
Thread D B h Minimum Rec. Hole Size Minimum Distance
Code
& Pitch Max +/- 0.2 max Sheet Thickness + 0.08 - 0.00 to edge of Sheet

M2.5 -1 1.5 1.5

0.45 4.35 4.8 4.4 6.0
-2 2.3 2.4
MACHINE SCREWS

M3 -1 1.5 1.5
ROLLED THREAD

4.35 4.8 4.4 6.0

0.5 -2

ol 2.3 2.4
Metric (dimensions in ‘mm’)

M3 Alt* -1 1.5 1.5

0.6 5.35 6.4 5.4 6.5
-2 2.3 2.4
M3.5 -1 1.5 1.5
0.6 5.35 6.4 5.4 6.5
-2 2.3 2.4
M4 -1 1.5 1.5
0.7 7.35 7.9 7.4 7.2
-2 2.3 2.4
pm
SCREWS FOR PLASTIC

M5 -1 1.5 1.5
0.8 7.85 9.5 7.9 8.8
-2 2.3 2.4
M6 -3 3.1 3.2
1.0 8.70 9.5 8.75 8.8
(- 4) 3.9 4.0
Stainless Steel Clinch Flush Nuts are suitable for use in sheet steel with a maximum hardness of HRB70.

Clinch Blind Standoffs

FASTENERS FOR
SHEET METAL

://u

Technical Data
C
Thread A Minimum
+ 0.0 Length in mm + / - 0.20
& Pitch Nom Minimum Rec. Hole Size Distance
- 0.13
Sheet Thickness + 0.08 - 0.00 to
edge of Sheet
Length Codes 6 8 10 12 14 16 18 20 22 25
M3
CD WELD STUDS

4.18 4.8 6 8 10 12 14 16 18 20 22 25 1.0 4.2 6

Metric (dimensions in ‘mm’)

0.5
M3 Alt
0.5 5.39 6.4 6 8 10 12 14 16 18 20 22 25 1.0 5.4 6.8
M4
0.7 7.10 7.9 6 8 10 12 14 16 18 20 22 25 1.3 7.2 8
M5
7.10 7.9 6 8 10 12 14 16 18 20 22 25 1.3 7.2 8
tp

0.8

Dimensions
BRASS INSERTS
FOR PLASTIC

Length (mm) 6 8 10 12 14 16 18 20 22 25

B’ Dim. (min) n/a 4 5 6.5 9.5

Steel Clinch Blind Standoffs are suitable for use in sheet steel with a maximum hardness of HRB70.
Stainless Steel Clinch Blind Standoffs are suitable for use in sheet steel with a maximum hardness of HRB70.
ht

For Sheet Steel with a greater hardness, Rivet Bushes are recommended.
TECHNICAL DATA

180 Upmold Technology Limited http://upmold.com

 SELF-TAPPING
SCREWS
m
TECHNICAL DATA 9

DIN 7504 SELF-DRILLING

SCREWS
co
Self-Clinching Fasteners

DIN 7500 THREAD ROLLING

Clinch Through Standoffs

SCREWS
d.
Technical Data
C
Thread A Minimum
+ 0.0 D Length in mm + / - 0.20
& Pitch Nom Minimum Rec. Hole Size Distance
- 0.13
Sheet Thickness + 0.08 - 0.00 to
edge of Sheet
Length Codes 6 8 10 12 14 16 18 20 22 25

MACHINE SCREWS
M2.5

ROLLED THREAD
4.18 3.2 3.2 6 8 10 12 14 16 18 20 22 25 1.0 4.2 6

ol
0.5
Metric (dimensions in ‘mm’)

M3
0.5 4.18 3.2 4.8 6 8 10 12 14 16 18 20 22 25 1.0 4.2 6
M3 Alt
0.5 5.39 3.2 6.4 6 8 10 12 14 16 18 20 22 25 1.0 5.4 6.8
M4
0.7 7.10 4.8 7.9 6 8 10 12 14 16 18 20 22 25 1.3 7.2 8
M5
0.8 7.10 5.2 7.9 6 8 10 12 14 16 18 20 22 25 1.3 7.2 8
pm

SCREWS FOR PLASTIC

Dimensions
Length (mm) 6 8 10 12 14 16 18 20 22 25

B’ Dim. (Nom) n/a 4 4 8 8 11 11

Steel Clinch Through Standoffs are suitable for use in sheet steel with a maximum hardness of HRB70.
Stainless Steel Clinch Through Standoffs are suitable for use in sheet steel with a maximum hardness of HRB70.
For Sheet Steel with a greater hardness, Rivet Bushes are recommended.

FASTENERS FOR
SHEET METAL
Clinch Studs
://u

Technical Data
Metric (Dimensions in mm) CD WELD STUDS

Min Hole
Thread D H Min Distance
Rec Sheet + 0.08
Size + / - 0.4 Max to edge of sheet
Thickness - 0.0

M2.5 4.1 1.95 1.0 2.5 5.4

M3 4.6 2.1 1.0 3.0 5.6
tp

M4 5.9 2.4 1.0 4.0 7.2

M5 6.5 2.7 1.0 5.0 7.2
BRASS INSERTS

8.2 3.0 1.6 6.0 7.9

FOR PLASTIC

M6

M8 9.6 3.7 2.4 8.0 9.0

Steel Clinch Studs are suitable for use in sheet steel with a maximum hardness of HRB70.
Stainless Steel Clinch Studs are suitable for use in sheet steel with a maximum hardness of HRB70.
ht

For Sheet Steel with a greater hardness, Rivet Bushes are recommended.
TECHNICAL DATA

http://upmold.com Upmold Technology Limited 181

SELF-TAPPING
SCREWS

m
TECHNICAL DATA 9
DIN 7504 SELF-DRILLING

B L
SCREWS

co
Self-Clinching Fasteners
D H
DIN 7500 THREAD ROLLING

High Strength Clinch Studs - Non Flush

SCREWS

d.
Technical Data
Metric (Dimensions in mm)

Min Hole
Thread D H B Min Distance
Rec Sheet + 0.13
Size + / - 0.4 Max Max to edge of sheet
Thickness - 0.0
MACHINE SCREWS
ROLLED THREAD

M8

M10
12.5
15.7
3.5
4.1

ol 1.78
2.30
2.0
2.4
8.0
10.0
12.7
13.7

Steel High Strength Clinch Studs are suitable for use in sheet steel with a maximum hardness of HRB85.
pm
SCREWS FOR PLASTIC
FASTENERS FOR
SHEET METAL

://u
CD WELD STUDS

tp
BRASS INSERTS
FOR PLASTIC

ht
TECHNICAL DATA

182 Upmold Technology Limited http://upmold.com

 SELF-TAPPING
SCREWS
m
TECHNICAL DATA 10

DIN 7504 SELF-DRILLING

Setzmutter
K-SERIES

SCREWS
co
A/F h

h1

d1

d2

DIN 7500 THREAD ROLLING

Standard Spigot

SCREWS
d.
Metric (Dimensions in mm)

Spigot Length
Thread Across Hole Material
h d1 d2
Size Flats A/F Diameter Thickness
h1

MACHINE SCREWS
ROLLED THREAD
+ 0.00 + 0.05

ol
M2.5 3.00 + / - 0.13 0.90 - 0.13
5.50 + / - 0.1 4.50 4.50 - 0.13
4.70 + / - 0.13 1 mm

+ 0.00 + 0.05
M3 3.00 + / - 0.13 0.90 - 0.13
5.50 + / - 0.1 4.50 4.50 - 0.13
4.70 + / - 0.13 1 mm

+ 0.00 + 0.05
M4 3.20 + / - 0.13 0.90 - 0.13
7.00 + / - 0.1 5.50 5.50 - 0.13
5.70 + / - 0.13 1 mm

+ 0.00 + 0.05
M5 4.00 + / - 0.13 0.90 - 0.13
8.00 + / - 0.1 6.50 6.50 - 0.13
6.75 + / - 0.13 1 mm
pm

SCREWS FOR PLASTIC

+ 0.00 + 0.05
M6 5.00 + / - 0.13 0.90 - 0.13
10.00 + / - 0.1 8.00 8.00 - 0.13
8.30 + / - 0.13 1 mm

+ 0.00 + 0.05
M8 6.50 + / - 0.15 1.80 - 0.15
13.00 + / - 0.13 10.00 10.00 - 0.15
10.30 + / - 0.15 2 mm

+ 0.00 + 0.05
M10 8.00 + / - 0.15 1.80 - 0.15
15.00 + / - 0.13 12.50 12.50 - 0.15
12.85 + / - 0.15 2 mm

+ 0.00 + 0.05
M12 10.00 + / - 0.15 2.80 - 0.15
17.00 + / - 0.15 14.50 14.50 - 0.15
14.85 + / - 0.15 3 mm

FASTENERS FOR
+ 0.00 + 0.05

SHEET METAL
M16 13.00 + / - 0.20 2.40 - 0.15
22.00 + / - 0.20 18.50 18.50 - 0.20
18.85 + / - 0.20 3 mm

+ 0.00 + 0.05
://u

M20 16.00 + / - 0.20 3.90 - 0.20

27.00 + / - 0.20 23.00 23.00 - 0.20
23.40 + / - 0.20 4 mm

Minimum Case Hardness Hv0.3 610. Tested to ISO 898.

CD WELD STUDS
tp

BRASS INSERTS
FOR PLASTIC
ht

TECHNICAL DATA

http://upmold.com Upmold Technology Limited 183

SELF-TAPPING
SCREWS

m
TECHNICAL DATA 10
DIN 7504 SELF-DRILLING

Setzmutter
K-SERIES
SCREWS

co
A/F h

h1

d1

d2
DIN 7500 THREAD ROLLING

Intermediate Spigot
SCREWS

d.
Metric (Dimensions in mm)

Spigot Length
Thread Across Hole Material
h d1 d2
Size Flats A/F Diameter Thickness
h1
MACHINE SCREWS
ROLLED THREAD

+ 0.00 + 0.05

ol
M2.5 3.00 + / - 0.13 1.40 - 0.13
5.50 + / - 0.1 4.50 4.50 - 0.13
4.70 + / - 0.13 1.5 mm

+ 0.00 + 0.05
M3 3.00 + / - 0.13 1.40 - 0.13
5.50 + / - 0.1 4.50 4.50 - 0.13
4.70 + / - 0.13 1.5 mm

+ 0.00 + 0.05
M4 3.20 + / - 0.13 1.40 - 0.13
7.00 + / - 0.1 5.50 5.50 - 0.13
5.70 + / - 0.13 1.5 mm

+ 0.00 + 0.05
M5 4.00 + / - 0.13 1.40 - 0.13
8.00 + / - 0.1 6.50 6.50 - 0.13
6.75 + / - 0.13 1.5 mm
pm
SCREWS FOR PLASTIC

+ 0.00 + 0.05
M6 5.00 + / - 0.13 1.40 - 0.13
10.00 + / - 0.1 8.00 8.00 - 0.13
8.30 + / - 0.13 1.5 mm

Minimum Case Hardness Hv0.3 610. Tested to ISO 898.

h
A/F
h1
FASTENERS FOR
SHEET METAL

d1
://u

Long Spigot d2

Metric (Dimensions in mm)

Spigot Length
CD WELD STUDS

Thread Across Hole Material

h d1 d2
Size Flats A/F Diameter Thickness
h1

+ 0.00 + 0.05
M2.5 3.00 + / - 0.13 1.80 - 0.13
5.50 + / - 0.1 4.50 4.50 - 0.13
4.70 + / - 0.13 2 mm

+ 0.00 + 0.05
M3 3.00 1.80 5.50 4.50 4.50 4.70 2 mm
tp

+ / - 0.13 + / - 0.1 + / - 0.13

- 0.13 - 0.13

+ 0.00 + 0.05
M4 4.50 + / - 0.13 1.80 - 0.13
7.00 + / - 0.1 5.50 5.50 - 0.13
5.70 + / - 0.13 2 mm
BRASS INSERTS
FOR PLASTIC

+ 0.00 + 0.05
M5 5.00 + / - 0.13 1.80 - 0.13
8.00 + / - 0.1 6.50 6.50 - 0.13
6.75 + / - 0.13 2 mm

+ 0.00 + 0.05
M6 5.00 + / - 0.13 1.80 - 0.13
10.00 + / - 0.1 8.00 8.00 - 0.13
8.30 + / - 0.13 2 mm
ht

Minimum Case Hardness Hv0.3 610. Tested to ISO 898.

TECHNICAL DATA

184 Upmold Technology Limited http://upmold.com

 SELF-TAPPING
SCREWS
m
TECHNICAL DATA 10
11
D

DIN 7504 SELF-DRILLING

SCREWS
co
L2

CD Weld Studs
L

B
A
a
L1
D2

DIN 7500 THREAD ROLLING

D1

Threaded - PT

SCREWS
d.
Metric (Dimensions in mm)

L D1 D2 L1 B a
D + 0.6 A L2
+ / - 0.2 + / - 0.08 + / - 0.05 max. + / - 1º
- 0.0

MACHINE SCREWS
ROLLED THREAD
M3 4.5 0.60

ol 0.55 0.7 - 1.4 1.5

See Dimensions

M4 5.5 0.65
L
M5 6.5 3º
0.80 2 - 0.3
M6 7.5 0.75 0.8 - 1.4
M8 9.0 0.85 3
pm

SCREWS FOR PLASTIC

D

L2
L

FASTENERS FOR
SHEET METAL
a
L1
Unthreaded - UT D2
://u

D1

Metric (Dimensions in mm)

L
D D1 D2 L1 a
+ / - 0.1
+ 0.6 A L2
CD WELD STUDS

+ / - 0.2 + / - 0.08 + / - 0.05 + / - 1º

- 0.0

ø3 4.5 0.60
0.55 0.7 - 1.4
See Dimensions

ø4 5.5 0.65
L
ø5 6.5 3º
- 0.3
tp

0.80
ø6 7.5 0.75 0.8 - 1.4
ø 7,1 9.0 0.85
BRASS INSERTS
FOR PLASTIC
ht

TECHNICAL DATA

http://upmold.com Upmold Technology Limited 185

SELF-TAPPING
SCREWS

m
TECHNICAL DATA 11 D
D3
DIN 7504 SELF-DRILLING

B
SCREWS

co
CD Weld Studs
L
L2

A
a
L1
DIN 7500 THREAD ROLLING

D2
D1
Internally Threaded - IT
SCREWS

d.
Metric (Dimensions in mm)

L
D D1 D2 L1 B a
+ / - 0.1
+ 0.6 A D3 C L2
+ / - 0.2 + / - 0.08 + / - 0.05 + / - 0.05 + / - 1º
- 0.0
MACHINE SCREWS

ø5
ROLLED THREAD

6.5 M3 5 2.5

ol
See Dimensions

0.80
ø6 7.5 M4 6 3
0.8 - 1.4

L
0.75 3º
ø 7,1 M5 3 - 0.3
9.0 0.85 7.5
ø8 M6 3
pm
SCREWS FOR PLASTIC

L2
L

A
a
L1
FASTENERS FOR
SHEET METAL

D2
D1
Coarse Threaded - CT
://u

Metric (Dimensions in mm)

L
D D1 D2 L1 a
CD WELD STUDS

+ / - 0.1
+ 0.6 A L2
+ / - 0.2 + / - 0.08 + / - 0.05 + / - 1º
- 0.0

L
ø5 See
Dimensions 6.5 0.75 0.80 0.8 - 1.4 3º
- 0.3
tp
BRASS INSERTS
FOR PLASTIC

ht
TECHNICAL DATA

186 Upmold Technology Limited http://upmold.com

 SELF-TAPPING
SCREWS
m
TECHNICAL DATA 12
10

DIN 7504 SELF-DRILLING

SCREWS
co
Brass Inserts for Plastic

DIN 7500 THREAD ROLLING

Sonic-Fix Unheaded (UHDSONFIX) Headed (HDSONFIX)

SCREWS
d.
Metric M2 M2.5 M3 M3.5 M4 M5 M6 M8 M10

10.24 1/4-20 5/16-18 3/8-16

Thread Size
UNC UNC UNC UNC
Unified 2.56 UNC - 4.40 UNC 6.32 UNC 8.32 UNC
10.32 1/4-28 5/16-24 3/8-24

MACHINE SCREWS
UNF UNF UNF UNF

ROLLED THREAD
L mm

W mm

T mm

H mm

N mm
ol 4.0
3.6
0.53
4.8
3.1
5.7
4.6
0.61
5.5
3.9
5.7
4.6
0.61
5.5
3.9
7.1
5.4
0.76
6.4
4.7
8.1
6.3
0.91
7.1
5.5
9.5
7.1
1.09
7.9
6.3
12.7
8.7
1.35
9.5
7.9
12.7
10.2
1.35
11.1
9.5
12.7
12.6
1.60
14.0
11.8
pm

SCREWS FOR PLASTIC

Recommended Hole Size mm (-0.0/+0.1) 3.2 4.0 4.0 4.8 5.6 6.4 8.0 9.6 11.9
Minimum Wall Thickness mm 1.3 1.6 1.6 1.8 2.1 2.6 3.3 4.5 6.0

FASTENERS FOR
SHEET METAL
Tech-Fix Unheaded (UHDTECFIX)
://u

Metric M2 M2.5 M3 M3.5 M4 M5 M6 M8 M10

10.24 1/4-20 5/16-18 3/8-16

Thread Size
CD WELD STUDS

UNC UNC UNC UNC

Unified 2.56 UNC - 4.40 UNC 6.32 UNC 8.32 UNC
10.32 1/4-28 5/16-24 3/8-24
UNF UNF UNF UNF

L mm 4.0 5.7 5.7 7.1 8.1 9.5 12.7 12.7 12.7

W mm 3.5 4.4 4.4 5.2 6.1 6.8 8.5 10.0 12.3
tp

N mm 3.1 3.9 3.9 4.7 5.5 6.3 7.9 9.5 11.8

Recommended Hole Size mm (-0.0/+0.1) 3.2 4.0 4.0 4.8 5.6 6.4 8.0 9.6 11.9
BRASS INSERTS

Minimum Wall Thickness mm 1.3 1.6 1.6 1.8 2.1 2.6 3.3 4.5 6.0
FOR PLASTIC
ht

TECHNICAL DATA

http://upmold.com Upmold Technology Limited 187

SELF-TAPPING
SCREWS

m
TECHNICAL DATA 12
DIN 7504 SELF-DRILLING
SCREWS

co
Brass Inserts for Plastic
DIN 7500 THREAD ROLLING

Heat-Fix Unheaded (UHDHEAFIX) Headed (HDHEAFIX)

SCREWS

d.
Metric M2 M2.5 M3 M3.5 M4 M5 M6 M8

10.24 1/4-20 5/16-18

Thread Size
UNC UNC UNC
Unified 2.56 UNC - 4.40 UNC 6.32 UNC 8.32 UNC
10.32 1/4-28 5/16-24
MACHINE SCREWS

UNF UNF UNF

ROLLED THREAD

L mm

W mm

T mm

H mm

N mm
ol
3.9
3.5
0.51
4.8
3.1
5.8
4.4
0.58
5.5
3.9
5.8
4.4
0.58
5.5
3.9
7.1
5.2
0.74
6.4
4.7
8.1
6.1
0.89
7.1
5.5
9.5
6.9
1.07
7.9
6.3
12.7
8.5
1.32
9.5
7.9
12.7
10.0
1.32
11.1
9.5
pm
SCREWS FOR PLASTIC

Recommended Hole Size mm (-0.0/+0.1) 3.2 4.0 4.0 4.8 5.6 6.4 8.0 9.6
Minimum Wall Thickness mm 1.4 1.8 1.8 2.1 2.4 2.8 3.6 5.0
FASTENERS FOR
SHEET METAL

Fin-Fix Unheaded (UHDFINFIX) Headed (HDFINFIX)

://u

Metric M2 M2.5 M3 M3.5 M4 M5 M6 M8

10.24 1/4-20 5/16-18

Thread Size
CD WELD STUDS

UNC UNC UNC

Unified 2.56 UNC - 4.40 UNC 6.32 UNC 8.32 UNC
10.32 1/4-28 5/16-24
UNF UNF UNF

L mm 4.0 4.8 4.8 6.4 7.9 9.5 12.7 12.7

W mm 3.7 4.5 4.5 5.3 6.1 7.0 8.6 10.2
tp

T mm 0.45 0.58 0.58 0.74 0.89 1.07 1.32 1.32

H mm 4.8 5.5 5.5 6.4 7.1 7.9 9.5 11.0
BRASS INSERTS

N mm 3.1 3.9 3.9 4.7 5.5 6.3 7.9 9.5

FOR PLASTIC

Recommended Hole Size mm (-0.0/+0.1) 3.2 4.0 4.0 4.8 5.6 6.4 8.0 9.6
Minimum Wall Thickness mm 1.6 2.0 2.0 2.4 2.8 3.2 4.0 4.8
ht
TECHNICAL DATA

188 Upmold Technology Limited http://upmold.com

 SELF-TAPPING
SCREWS
m
TECHNICAL DATA 12
10

DIN 7504 SELF-DRILLING

SCREWS
co
Brass Inserts for Plastic

DIN 7500 THREAD ROLLING

Spirol-Fix Unheaded (UHDSPIFIX) Headed (HDSPIFIX)

SCREWS
d.
Metric M2 M2.5 M3 M3.5 M4 M5 M6 M8 M10

10.24 1/4-20 5/16-18 3/8-16

Thread Size
UNC UNC UNC UNC
Unified 2.56 UNC - 4.40 UNC 6.32 UNC 8.32 UNC
10.32 1/4-28 5/16-24 3/8-24

MACHINE SCREWS
UNF UNF UNF UNF

ROLLED THREAD
L mm

W mm

T mm

H mm

N mm
ol 4.1
3.3
0.51
4.8
3.0
5.3
4.2
0.58
5.5
3.7
5.3
4.2
0.58
5.5
3.7
6.3
5.0
0.74
6.4
4.5
7.4
5.8
0.89
7.1
5.3
8.3
6.6
1.07
7.9
6.1
9.2
8.2
1.32
9.5
7.7
9.2
9.7
1.32
11.1
9.3
9.2
12.7
1.57
14.0
12.3
pm
3.1 3.8 3.8 4.6 5.4 6.2 7.8 9.3 12.3

SCREWS FOR PLASTIC

Recommended Hole Size mm (-0.0/+0.1)

Minimum Wall Thickness mm 1.6 2.0 2.0 2.5 2.5 2.5 2.8 3.8 5.0

FASTENERS FOR
SHEET METAL
Expansion-Fix Unheaded (UHDEXPFIX) Headed (HDEXPFIX)
://u

Metric M2 M2.5 M3 M3.5 M4 M5 M6 M8

10.24 1/4-20 5/16-18

Thread Size
CD WELD STUDS

UNC UNC UNC

Unified 2.56 UNC - 4.40 UNC 6.32 UNC 8.32 UNC
10.32 1/4-28 5/16-24
UNF UNF UNF

L mm 3.9 4.7 4.7 6.3 7.9 9.4 12.6 12.6

T mm 0.43 0.51 0.51 0.66 0.82 0.99 1.25 1.25
tp

H mm 4.8 5.5 5.5 6.4 7.1 7.9 9.5 11.1

W max mm 3.2 4.0 4.0 4.7 5.5 6.3 7.9 9.5
BRASS INSERTS

Recommended Hole Size mm (-0.0/+0.1) 3.2 4.0 4.0 4.8 5.6 6.4 8.0 9.6
FOR PLASTIC

Minimum Wall Thickness mm 2.4 3.2 3.2 3.6 4.0 4.8 6.0 7.0
ht

TECHNICAL DATA

http://upmold.com Upmold Technology Limited 189

SELF-TAPPING
SCREWS

m
TECHNICAL DATA 12
DIN 7504 SELF-DRILLING
SCREWS

co
Brass Inserts for Plastic
DIN 7500 THREAD ROLLING

Thread-Fix Unheaded (UHDTHRFIX) Headed (HDTHRFIX)

SCREWS

d.
Metric M2.5 M3 M3.5 M4 M5 M6 M8 M10

10.24 1/4-20 5/16-18 3/8-16

Thread Size
UNC UNC UNC UNC
Unified - 4.40 UNC 6.32 UNC 8.32 UNC
10.32 1/4-28 5/16-24 3/8-24
MACHINE SCREWS

UNF UNF UNF UNF

ROLLED THREAD

L mm

T mm

H mm

W mm max

Recommended Hole Size Thermoplastics mm

ol
6.0
0.58
6.0
4.5
4.0 - 4.1
0.58
6.0

6.5
5.0
4.5 - 4.6
8.0
0.73
7.5
6.0
5.3 - 5.4
8.0
0.89
8.0
6.5
5.8 - 5.9
10.0
1.06
9.5
8.0
7.1 - 7.2
14.0
1.32
12.0
10.0
8.6 - 8.8
15.0
1.32
14.0
12.0
18.0
1.57
16.0
14.0
10.6 - 10.8 12.6 - 12.8
pm
SCREWS FOR PLASTIC

Recommended Hole Size Thermosets mm 4.1 - 4.3 4.6 - 4.8 5.5 - 5.7 6.0 - 6.2 7.3 - 7.6 9.0 - 9.4 11.0 - 11.4 13.0 - 13.4
FASTENERS FOR
SHEET METAL

Flow-Fix Unheaded (UHDFLOFIX)

://u

Metric M2 M2.5 M3 M3.5 M4 M5 M6 M8 M10

10.24 1/4-20 5/16-18 3/8-16

Thread Size
UNC UNC UNC UNC
Unified 2.56 UNC - 4.40 UNC 6.32 UNC 8.32 UNC
10.32 1/4-28 5/16-24 3/8-24
CD WELD STUDS

UNF UNF UNF UNF

L mm 5.5 6.4 7.3 9.5 10.2 11.2 14.4 16.5 17.9

W mm 3.4 4.3 4.7 5.5 6.3 7.3 9.8 11.4 13.8
A min. mm 3.6 4.0 4.6 6.0 6.7 7.4 8.1 11.1 11.9
tp

C mm 1.0 1.2 1.3 1.6 1.8 2.0 2.0 2.3 2.4

BRASS INSERTS
FOR PLASTIC

ht
TECHNICAL DATA

190 Upmold Technology Limited http://upmold.com