Scribd
Upload
462 views2 pages

Prime Coat - Product Data Sheet

This document provides information on ITER PRIME HC, a solvent-based bituminous prime coat manufactured from kerosene and 60/70 penetration graded bitumen. ITER PRIME HC is used to prime granular road surfaces by penetrating and binding surface layers. It stabilizes surface fines, promotes bonding to subsequent layers, seals pores to prevent moisture migration, and provides adhesion between layers. The product should be heated and applied according to instructions before the primed surface dries for at least 48 hours.

Uploaded by

naina
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
462 views2 pages

Prime Coat - Product Data Sheet

This document provides information on ITER PRIME HC, a solvent-based bituminous prime coat manufactured from kerosene and 60/70 penetration graded bitumen. ITER PRIME HC is used to prime granular road surfaces by penetrating and binding surface layers. It stabilizes surface fines, promotes bonding to subsequent layers, seals pores to prevent moisture migration, and provides adhesion between layers. The product should be heated and applied according to instructions before the primed surface dries for at least 48 hours.

Uploaded by

naina
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Bituminous Emulsions

ITER PRIME HC
Bituminous Emulsions

Solvent Based Bituminous Prime Coat

Description ITER PRIME HC A Hydro carbon (Solvent) base


cutback asphalt (medium curing type) manufactured
from kerosene and 60/70 penetration graded
bitumen. Its is produced using a shear mixer to
ensure high grade dispersion of bitumen & effective
penetration

Uses ITER PRIME HC Used for:


Priming granular road surfaces as they can
penetrate and bind the surface layers and create
water proofing
Stabilizing or binding the surface fines together
and promoting bond to the HMA layer.
ROAD APPLICATIONS

ROAD APPLICATIONS
Advantages ITER PRIME HC Coats and bonds loose mineral particles on the surface of the
base course
Seals surface pores and makes the surface of the base course water-resistant
Hardens and toughens the base course
Plugs capillary voids in the base course surface to prevent migration of
moisture
Provides adhesion between base course and the succeeding course

Application ITER PRIME HC. Immediately before applying the prime coat, the full width
Instructions of the surface to be primed shall be swept with a power broom to remove all
loose dirt and other objectionable material. The primer shall be heated at
the time of application to a temperature specified by the Engineer in
accordance with the limits provided. The primed surface shall be allowed to
dry not less than 48 hours without being disturbed.

ITER PRIME HC may be removed from tools before it has set by washing in
Cleaning
clean, warm water. If the product dries it can be removed with solvents like
petrol or kerosene

Coverage Normal Application rate: 0.5 to 1.4 Kg/M2


Product Data Sheet

Storage
Product Data Sheet

Store under cover at temperature between 5OC & 40OC

Shelf Life Long Life in air tight closed containers under 5OC & 50OC

Manufactured By: ITERCHIMICA GULF W L L


Iterchimica Gulf W L L,
Tel. : +974- 4462 1830– Fax: +974- 4462 2582
P B No: 50441, Doha- Qatar.
E-mail: [email protected] Website: www.qadco.qa
Bituminous Prime Coat
ITER PRIME HC
Bituminous Prime Coat

Solvent Based Bituminous Prime Coat

Packing Bulk (Road tanker) and 200 Litres Drum

Health & Safety Please refer to health and safety data sheet

Technical Data
Property Unit Result Test Method
Kinematic Viscosity at 140 °F cSt 86 ASTM 2027
Flash Point °F 108 ASTM 2027
Distillate Test: % 16 ASTM 2027
Distillate, vol. % of total distillate to % 34
680 °F: % 76
a) to 437 °F
b) to 500 °F
c) to 600 °F
Residue From Distillation to 680 °F % 63 ASTM 2027
Viscosity at 140 °F P 845 ASTM 2027
ROAD APPLICATIONS

Solubility in tri-choloro ethylene % 99.5 ASTM 2027

ROAD APPLICATIONS
Ductility 77 °F Cm. 110 ASTM 2027
Water % 0.15 ASTM 2027

Product Data Sheet


Product Data Sheet

Statements made in this bulletin are for the assistance of our


Disclaimer customers. They are based on our experience and judgment but
must not be regarded as amounting to a legal warranty or as
involving any liability on our part.
Manufactured By: ITERCHIMICA GULF W L L
Iterchimica Gulf W L L,
Tel. : +974- 4462 1830– Fax: +974- 4462 2582
P B No: 50441, Doha- Qatar.
E-mail: [email protected] Website: www.qadco.qa

You might also like