Scribd
Upload
1K views7 pages

Denso sh7058 896xxx Hino

This document provides instructions for connecting to the DENSO SH7058 896xxx HINO ECU. Two different flat cables are required - one for reading (F34NTF53) and one for writing (F34NTF51). The ECU can be connected directly using cable F32GN037C/D or through the DIMA adapter, which requires F34DM016 for reading and F34DM019 for writing. Power must be supplied to the ECU for all connection methods.

Uploaded by

Slamat Agung
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views7 pages

Denso sh7058 896xxx Hino

This document provides instructions for connecting to the DENSO SH7058 896xxx HINO ECU. Two different flat cables are required - one for reading (F34NTF53) and one for writing (F34NTF51). The ECU can be connected directly using cable F32GN037C/D or through the DIMA adapter, which requires F34DM016 for reading and F34DM019 for writing. Power must be supplied to the ECU for all connection methods.

Uploaded by

Slamat Agung
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

DENSO SH7058 896xxx HINO

plugin 347 – 487 – 579 – 601 - 629

https://ecu.design
DENSO SH7058 896xxx HINO

DIRECT CONNECTION
In order to connect to the ECU use the CABLE F32GN037C/D.
Make sure that the POWER led (red) on Trasdata is ON.
Use this connection with the DIMA too.

ECU CONNECTOR

WARNING :
on this ECU you must use two different flat cables: one is for the READING procedure and one is
for the WRITING procedure.

https://ecu.design
DENSO SH7058 896xxx HINO

DIRECT CONNECTION – ECU READING:


For the READING procedure use the FLAT cable F34NTF53

https://ecu.design
DENSO SH7058 896xxx HINO

https://ecu.design
DENSO SH7058 896xxx HINO

DIRECT CONNECTION – ECU WRITING:


For the WRITING procedure use the FLAT cable F34NTF51

https://ecu.design
DENSO SH7058 896xxx HINO

DIMA CONNECTION – ECU READING


Power the ECU with the F32GN037C/D wiring. Use the DIMA adapter F34DM016.

https://ecu.design
DENSO SH7058 896xxx HINO

DIMA CONNECTION – ECU WRITING


Power the ECU with the F32GN037C/D wiring. Use the DIMA adapter DIMA F34DM019.

https://ecu.design

You might also like