Scribd
Upload
142 views

SKV FM QA 07 Sampling Plan

This document outlines a sampling plan for incoming inspections with an acceptance quality level (AQL) of 0%. It provides the sample size requirements for dimensional and visual inspections according to inspection levels G2 and S2 of the IS-2500 standard. Sample sizes range from 2 to 13 pieces for dimensional inspection and 3 to 315 pieces for visual inspection depending on the lot size, with no allowable rejections.

Uploaded by

Saurabh Bhadouriya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
142 views

SKV FM QA 07 Sampling Plan

This document outlines a sampling plan for incoming inspections with an acceptance quality level (AQL) of 0%. It provides the sample size requirements for dimensional and visual inspections according to inspection levels G2 and S2 of the IS-2500 standard. Sample sizes range from 2 to 13 pieces for dimensional inspection and 3 to 315 pieces for visual inspection depending on the lot size, with no allowable rejections.

Uploaded by

Saurabh Bhadouriya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Sampling Plan for Incoming Inspection

QPMC
(with Acceptance Quality Level (AQL) 0%)
Sample Size as per Sample Size as per
Lot Size Inspection Level G2, IS-2500 Rejection Number Inspection Level S2, IS-2500 Rejection Number
(Dimensional) (Visual)

2 to 8 2 0 3 0

9 to 15 2 0 3 0

16 to 25 2 0 3 0

26 to 50 3 0 3 0

51 to 90 3 0 13 0

91 to 150 3 0 13 0

151 to 280 5 0 13 0

281 to 500 5 0 20 0

501 to 1200 5 0 32 0

1201 to 3200 8 0 50 0

3201 to 10000 8 0 80 0

10001 to 35000 8 0 125 0

35001 to 150000 13 0 200 0

150001 to 500000 13 0 315 0

500001 and over 13 0 315 0

NOTE :

1. For initial lots, sample size to be checked is 5 numbers for dimensional and visual inspection.

Prepared by Approved by

SKV-FM-QA-07, Rev No.00, Rev. Date: 01.02.2023

You might also like