Scribd
Upload
28 views

Transcribeme Test

Speaker 2 had issues with a machine's balancing sensors and circuit board. The left side sensors and readings were incorrect. A service technician needs to calibrate the machine, which will cost around $4,000 for the service plus $2,000-$2,500 for a new circuit board, totaling $6,500-$7,000. Speaker 1 and 2 then jokingly discuss using that money to buy a used car like a Toyota or the rare Edsel, but agree it would be nice to dream.

Uploaded by

Awais Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as ODT, PDF, TXT or read online on Scribd
28 views

Transcribeme Test

Speaker 2 had issues with a machine's balancing sensors and circuit board. The left side sensors and readings were incorrect. A service technician needs to calibrate the machine, which will cost around $4,000 for the service plus $2,000-$2,500 for a new circuit board, totaling $6,500-$7,000. Speaker 1 and 2 then jokingly discuss using that money to buy a used car like a Toyota or the rare Edsel, but agree it would be nice to dream.

Uploaded by

Awais Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as ODT, PDF, TXT or read online on Scribd
You are on page 1/ 1

Speaker 1: 

 Okay. Well, Steve,


 
I'd like to ask you how your day was, I
understand you had some problems with a machine, can you tell me about it? Well, I do the dishes
or just start talking.

Speaker 2: So how between the balancing machine, we found out that the low sensors on the left
side or in white side of both work by swapping the cables like the indication on the screen still
shows no load values and grounds on the left side. I inspected the circuit board. See if there isn't
loose connections on the current load Louisville is in connection with an error signal to actually
show you anything this is trying to show us something that is not the correct value. And coupled
with that, the the timing on the weight and balance, I'm going to show you that 90 degrees off axis
chizzy to zero degrees 12 o'clock. At zero degrees at 12 o'clock, we put that out there. And it shows
you that 90 degrees instead of zero, and if I put them at 90 degrees, it shows 180 degrees, etc. So
there's a definite problem with the calculation. So we need to get Hoffman America out there to do a
calibration on the units. Or at least look at it but since I think the data acquisition board is having a
problem. We've actually looked on eBay account on a low price. It will still need to be calibrated.
Regardless,

Speaker 1:   let me interrupt you to ask


you a quick question. How much do you think that this might cost the company?
Speaker 2: Well, to get the
service takeout they quoted us $4,000.
Speaker 1:  Okay. 
Speaker 2: And the board might be $2,000 or $2,500 on top of the service tech company. So, it
might be $6,500 $7,000 I don't know.
Speaker 1:  Wow,I could buy a nice used Toyota.
Speaker 2: Yeah.

Speaker 1: maybe good.


Speaker 2:  Actually, some places you can get a nice car.

Speaker 1: A Celica or an Edsel?


Speaker 2: Edsel that's working maybe not?
Speaker 1:  Well,you know, we can dream Can't We?

Speaker 2: You know, to dream, the impossible dream, finding a car that works in $23000 dollars.
Speaker 1: Well, nine, nine out of 10 car lovers, so we'd love to have an Edsel in working
conditions. So I've heard from Jay Leno's Garage.

Speaker 2: I didn't hear that before. I'm sure I'm not one of the nine I must be the one out of the 10.
That doesn't. Sort of the nine other people that do.
Speaker 1: That could be well, thank you for telling me all about your day. And I'm sure that the
future transcribers of GoTranscript will appreciate it as well.

You might also like