Scheme of Work

Cambridge IGCSETM / Cambridge IGCSE (9–1)

Mathematics 0580 / 0980
For examination from 2020

Version 3
Copyright © UCLES 2018 (updated July 2022)
Cambridge Assessment International Education is part of the Cambridge Assessment Group. Cambridge Assessment is the brand name of the University of
Cambridge Local Examinations Syndicate (UCLES), which itself is a department of the University of Cambridge.

UCLES retains the copyright on all its publications. Registered Centres are permitted to copy material from this booklet for their own internal use. However, we
cannot give permission to Centres to photocopy any material that is acknowledged to a third party, even for internal use within a Centre.
Contents
Introduction .................................................................................................................................................................................................................................................. 4
1 Number ..................................................................................................................................................................................................................................................... 7
2 Algebra and graphs ................................................................................................................................................................................................................................ 19
3 Coordinate geometry .............................................................................................................................................................................................................................. 31
4 Geometry ................................................................................................................................................................................................................................................ 34
5 Mensuration ............................................................................................................................................................................................................................................ 38
6 Trigonometry........................................................................................................................................................................................................................................... 41
7 Vectors and transformations................................................................................................................................................................................................................... 44
8 Probability ............................................................................................................................................................................................................................................... 46
9 Statistics ................................................................................................................................................................................................................................................. 49
Scheme of Work

Introduction
This scheme of work has been designed to support you in your teaching and lesson planning. Making full use of this scheme of work will help you to improve both
your teaching and your learners’ potential. It is important to have a scheme of work to ensure that the syllabus is fully covered. You can choose what approach
to take as you know the nature of your institution and the abilities of your learners; what follows is just one possible approach. Always check the syllabus for the
content of your course.
Suggestions for independent study (I) and formative assessment (F) are also included. Opportunities for differentiation are indicated as Extension activities; there is
the potential for differentiation by resource, grouping, expected level of outcome, and degree of support by teacher, throughout the scheme of work. Timings for
activities and feedback are left to the judgment of the teacher, according to the level of the learners and size of the class. Length of time allocated to a task is another
possible area for differentiation.

Guided learning hours

Guided learning hours give an indication of the amount of contact time you need to have with your learners to deliver a course. Our syllabuses are designed around
130 hours for Cambridge IGCSE courses. The number of hours may vary depending on local practice and your learners’ previous experience of the subject. The
table below gives some guidance about how many hours we recommend you spend on each topic area.

Topic Suggested teaching time (hours / % of the course) Suggested teaching order

1 Number Core: 39–46 hours (30–35%); Extended: 19–26 hours (15–20%) 1

2 Algebra and Graphs Core: 19–26 hours; (15–20%); Extended 39–46 hours (30–35%) 3

3 Geometry Core: 10 hours (8%) 4

4 Co-ordinate Geometry 6–9 hours (5–7%) 2

5 Mensuration 10 hours (8%) 5

6 Trigonometry 6–9 hours (5–7%) 6

7 Vectors and Transformations 6–9 hours (5–7%) 7

8 Probability 9 hours (7%) 8

9 Statistics 10 hours (8%) 9

4
 Scheme of Work
Resources
The up-to-date resource list for this syllabus, including textbooks endorsed by Cambridge International, is listed at www.cambridgeinternational.org
Endorsed textbooks have been written to be closely aligned to the syllabus they support and have been through a detailed quality assurance process. As such, all
textbooks endorsed by Cambridge International for this syllabus are the ideal resource to be used alongside this scheme of work as they cover each
learning objective. Past papers and Example Candidate Responses for syllabus 0580 are relevant and applicable to syllabus 0980, so we suggest you visit the
webpage for 0580 on our School Support Hub for further teaching materials.

School Support Hub

The School Support Hub www.cambridgeinternational.org/support is a secure online resource bank and community forum for Cambridge teachers, where you can
download specimen and past question papers, mark schemes and other resources for 0580 (which are also relevant for 0980). We also offer online and face-to-face
training; details of forthcoming training opportunities are posted online. This scheme of work is available as PDF and an editable version in Microsoft Word format; both
are available on the School Support Hub at www.cambridgeinternational.org/support. If you are unable to use Microsoft Word you can download Open Office free of
charge from www.openoffice.org

Resource Plus
Resource Plus
Throughout this scheme of work, you will find references to resources on the Resource Plus platform. Skills Pack: Venn diagrams
Resource Plus is a premium digital teaching and learning resource for Cambridge syllabuses that supports teachers and learners around the world in the most
challenging topics and skills. The topics of focus have been defined by quantitative analysis of exam results, as well as qualitative scrutiny of Principal Examiner’s
reports, engagement with Cambridge teachers, and review of the latest literature and research. Resource Plus for Cambridge IGCSE Mathematics 0580 includes:
Skills Packs containing detailed lesson plans, worksheets and answers; PowerPoint® presentations that can be used in lessons, containing class activities and
notes to guide teaching; Demonstration videos designed to explain difficult concepts to learners; Additional teaching resources including onscreen mathematical
models and templates; and Past paper questions focused on challenging topics.
Resource Plus also offers a wide range of other materials for you to use in your classroom. To try a demo, find out more, or to subscribe, visit
www.cambridgeinternational.org/resourceplus

Websites
This scheme of work includes website links. Cambridge Assessment International Education is not responsible for the accuracy or content of information contained in
these sites. The inclusion of a link to an external website should not be understood to be an endorsement of that website or the site's owners (or their
products/services).
The website pages referenced in this scheme of work were selected when the scheme of work was produced. Other aspects of the sites were not checked and only the
particular resources are recommended.

5
Scheme of Work
How to get the most out of this scheme of work – integrating syllabus content, skills and teaching strategies
We have written this scheme of work for the Cambridge IGCSE Mathematics 0580 and Cambridge IGCSE Mathematics (9–1) 0980 syllabuses and it provides some
ideas and suggestions of how to cover the content of the syllabus. We have designed the following features to help guide you through your course.

Learning objectives help your learners by making it

clear the knowledge they are trying to build. Pass Suggested teaching activities give you lots of
these on to your learners by expressing them as ‘We ideas about how you can present learners with
are learning to / about…’. new information without teacher talk or videos.
Try more active methods which get your
learners motivated and practising new skills.
Syllabus ref. Learning objectives Suggested teaching activities

C1.4 and Use directed Draw a number line from –20 to 20. Point to various numbers (both positive and negative)
E1.4 numbers in practical and ask learners questions such as “what is 5 more than this number?”; “What is 6 less Independent
than
situations, e.g. this number?” You can keep it simple by using only integers. Extension activity: extendstudythe (I) gives
temperature task by using decimals or fractions. your learners
changes, flood levels the opportunity
Extension activities provide your Look at directed numbers in the context of practical situations such as temperature changes,
to develop their
abler learners with further challenge flood levels, bank credits and debits. Learners can investigate a variety of temperature own ideas and
beyond the basic content of the changes involving positive and negative temperatures, using the statistics for over 29 000
understanding
course. Innovation and independent cities on weatherbase.com (www.weatherbase.com). (I) To check their understanding, with direct input
learning are the basis of these learners can then try the past paper question. (F) from you.
activities.
Past and specimen papers

Past/specimen papers and mark schemes are available for the 0580 syllabus to download at
www.cambridgeinternational.org/support (F)

C1.1: Paper 32 Jun 2017 Q 4; Paper 11 Jun 2017 Q 6 and 9; Paper 30 Jun 2017 Q 15
E1.1: Paper 41 Jun 2017 Q 10 Formative assessment (F) is on-going assessment
C1.2: Specimen Paper 1 Q20 and Q21; Paper 21 Jun 17 Q17(a) which informs you about the progress of your learners.
C1.3: Paper
Past papers, specimen 12 Jun
papers and2017 Q1schemes
mark and 6; Paper 33 Jun 2016 Q 6, also consolidates
Don’tC1.1
forget to leave time to review what your learners
are available forE1.3: Specimen
you to downloadPaper
at: 2Q19 and Q27(b) have learnt, you could try question and answer, tests,
www.cambridgeinternational.org/support quizzes, ‘mind maps’, or ‘concept maps’. These kinds of
activities can be found in the scheme of work.
Using these resources with your learners allows you to
check their progress and give them confidence and
understanding.

6
 Scheme of Work

1 Number

Syllabus ref. Learning objectives Suggested teaching activities

C1.1 and Identify and use natural A useful starting point would be to revise positive and negative numbers using a number line and explain the
E1.1 numbers, integers (positive, difference between natural numbers and integers. Learners would find it useful to have a definition of the listed
negative and zero), prime terms (e.g. factor, multiple, square number) which can be found on the Maths Revision website
numbers, square numbers, (www.mathsrevision.net). If the link doesn’t work: from the home page, select ‘GCSE > number > numbers’. (I)
common factors and common
multiples, rational and A fun activity is to allocate a number to each learner in the class and ask them to stand up if their number
irrational numbers (e.g. π , exhibits a property that you call out. For example, you might call out “a multiple of 4”; “a factor of 18”, etc. Use
this to show interesting facts, such as prime numbers will have 2 people standing up (this emphasises that 1 is
2 ), real numbers,
not prime); and square numbers will have an odd number of people standing up. You can use this activity to
reciprocals
highlight common factors/common multiples for pairs of numbers. This could be extended to HCF and LCM.
Includes expressing numbers
A follow-on activity would be for learners to identify a number from a description of its properties. For example,
as a product of prime factors.
say to the class “which number less than 50 has 3 and 5 as factors and is a multiple of 9?” You could also ask
learners to make up their own descriptions and test one another.
Finding the Lowest Common
Multiple (LCM) and Highest
Another interesting task is to look a Fermat’s discovery, which shows that some prime numbers are the sum of
Common Factor (HCF) of two
two squares, e.g. 29 = 25 + 4 = 5 2 + 2 2 . Learners could see what other prime numbers they can form in this
numbers.
P P P P

way, and any they can’t form in this way. Learners can look for a rule that tests if a prime can be made like this.
(I)

Look at how to write any integer as a product of prime numbers. One method that can be used is the factor tree
approach which can be found online. Demonstrate this technique to your learners, then ask them to practise
using the method to write other numbers as products of primes. Then ask learners to look at finding the product
of primes of other numbers, for example 60, 450, 42, 315, but this time they should be encouraged to look for
alternative methods, for example by researching on the internet; another useful method is the repeated division
method. (I)

Give learners a definition of the terms rational, irrational and real numbers, which you can find on the Maths is
Fun website (www.mathsisfun.com). If the link doesn’t work, from the home page: click on ‘Index > 10 upwards
> numbers > Irrational Numbers. The website also includes questions on rational and irrational numbers for
learners to try. These start simple and soon become more challenging. (I) (F)

Understand notation of Venn It is useful to start by introducing/revising simple Venn diagrams. For example, group people who wear glasses
C1.2
diagrams. in one circle and people with brown hair in another circle, and ask learners to describe the people in the

7
Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

overlapping region. You can encourage learners to actively participate by asking them to place physical objects
Definition of sets into the regions of a Venn diagram. You could even get learners to create their own version of the Venn
e.g. diagram by moving around the classroom based on their appearance; for example, as per the glasses and hair
A = {x: x is a natural number} colour example above. You could introduce the idea of a union in the intersection visually, and then link this to
the notation that they need to use. (I)
B = {a,b,c,…….}
There is some useful material on sets and set notation on the Maths Is Fun website (www.mathsisfun.com).
Notation
Search for ‘Introduction to Sets’ and ‘Sets and Venn Diagrams’ These resources also include some multiple
Number of elements in set A;
choice questions that learners could use to check their understanding. (F)
n(A)
Universal set
Union of A and B; Venn diagrams are a great way to visualise the structure of set relationships. They can be used to help
A∪ B visualise a broad range of problems across the mathematics curriculum where you want to explore the
relationships between groups. For example, they can be used to help solve probability questions (see syllabus
Intersection of A and B;
ref. C8 .1, C8 .5, E8 .6, below). They can also be used across strands as a way of enhancing conceptual
A∩ B understanding by the use of multiple representations.

While Venn diagrams work well for two or even three sets, they very quickly break down when the number of
sets gets beyond three. It is important that learners understand that they a tool for visualising a problem but not
really the solution to the problem that itself.

Resource Plus
Skills Pack: Venn diagrams

This Skills Pack includes lessons that cover the following:

• using Venn diagrams
• formal notation used with Venn diagrams
• constructing Venn diagrams to solve problems
• calculating simple probabilities using Venn diagrams.

E1.2 Use language, notation and It is useful to start with revising simple Venn diagrams. For example, group people who wear glasses in one
Venn diagrams to describe circle and people with brown hair in another circle, and ask learners to describe the people in the overlapping
sets and represent region.
relationships between sets.

Definition of sets

8
 Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

e.g. A = {x: x is a natural This can be extended to general Venn diagrams concentrating more on the shading of the regions representing
number} the sets A ∪ B , A ∩ B , A '∪ B , A ∪ B ' , A '∩ B , A ∩ B ' , A '∪ B ' and A '∩ B ' helping learners to understand
B = {(x,y): y = mx + c} the notation.
C = {x: a Y x Y b}
D = {a, b, c, …} Learners would find it useful to know that ( A ∪ B ) ' is the same as A '∩ B ' and that ( A ∩ B ) ' is the same as
A '∪ B ' . Make sure that learners understand the language associated with sets and Venn diagrams.

Learners need to be able to distinguish between a subset and a proper subset.

The work on Venn diagrams can be extended to look at unions and intersections when there are three sets.
Notation
Number of elements in set A; (A)
“…is an element of…” A; ∈ Resource Plus
“…is not an element of…”; ∉ Skills Pack: Venn diagrams
Complement of set A; A'
The empty set; ∅ This Skills Pack includes lessons that cover the following:
Universal set; • using Venn diagrams
A is a subset of B; A ⊆ B • formal notation used with Venn diagrams
A is a proper subset of B; A ⊂ B • constructing Venn diagrams to solve problems
A is not a subset of B; A⊈B • calculating simple probabilities using Venn diagrams.
A is not a proper subset of B; A ⊄
B
Union of A and B; A ∪ B
Intersection of A and B; A ∩ B

C1.3 and Calculate with squares, Using simple examples, illustrate squares, square roots, cubes and cube roots of integers.
E1.3 square roots, cubes and cube
roots and other powers and Extend this by asking more able learners to find the square and cube of fractions and decimals without using a
roots of numbers, e.g. work calculator; you might need to cover topic 1.8 first to help with this.
2
out 3 × 4 16
Show how to find the square root of an integer by repeated subtraction of consecutive odd numbers until you
reach zero. For example, for 25 subtract in turn 1, 3, 5, 7, and then 9 to get to 0. Five odd numbers have been
subtracted so the square root of 25 is 5. Ask learners to investigate this method for other, larger, square
numbers. (I)

Explain to learners that the square number 121 is palindromic (when the digits are reversed it is the same
number). Challenge learners to find all the palindromic square numbers less than 1000. (I)

To check their understanding, learners can then try the specimen paper question. (F)

9
Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

C1.4 and E1.4 Use directed numbers in Draw a number line from –20 to 20. Point to various numbers (both positive and negative) and ask learners
practical situations, e.g. questions such as “what is 5 more than this number?”; “What is 6 less than this number?” You can keep it
temperature changes, flood simple by using only integers. Extension activity: extend the task by using decimals or fractions.
levels
Look at directed numbers in the context of practical situations such as temperature changes, flood levels, bank
credits and debits. Learners can investigate a variety of temperature changes involving positive and negative
temperatures, using the statistics for over 29 000 cities on weatherbase.com (www.weatherbase.com). (I) To
check their understanding, learners can then try the past paper question. (F)

C1.5 and E1.5 Use the language and notation Give learners a definition of the relevant terms (e.g. numerator, denominator, equivalent fractions, simplify,
of simple vulgar and decimal vulgar fraction, improper fraction, mixed number, decimal fraction, and percentage). Ask learners to produce a
fractions and percentages in crossword with the terms defined. Ask them to add any other terms that they can think of to do with fractions,
appropriate contexts. decimals and percentages. Crosswords can be easily created using the excellent online software at
EclipseCrossword.com (www.eclipsecrossword.com) (I)
Recognise equivalence and
convert between these forms. Use clear examples and questions to cover converting between fractions, decimals and percentages. Learners
should understand how to use place value (units, tenths, hundredths, etc.) to change a simple decimal into a
fraction. For example 0.3 has 3 in the tenths column so it is 3 .
10

Includes the conversion of Look at the online lesson ‘converting repeating decimals to fractions’ at Basic-Mathematics.com (www.basic-
recurring decimals to fractions, mathematics.com) to demonstrate how to convert recurring decimals to fractions. It uses the following method:
e.g. change 0.7 to a fraction x = 0.15151515….
100x = 15.15151515… subtract these to get
15 5
99x = 15 so x = =
99 33

To check their understanding, learners can then try the past paper question. (F)

C1.6 and E1.6 Order quantities by magnitude A good active learning approach to this topic is to give learners a set of cards with the symbols =, ≠, >, <, ≥, ≤.
and demonstrate familiarity Ask them to choose which card should go in between pairs of quantities that you give them. For example, 400
with the symbols m and 4000 cm; 20% and 0.2; –8 and –10, etc. Extend this by asking learners to consider when, or if, more
=, ≠, >, <, ≥ , ≤ than one card can be used (e.g. ≠ can be used in place of > or <).

Give learners a list of fractions, decimals and percentages. Ask them to order these by magnitude using the
inequality signs.

To check their understanding, learners can then try the past paper question. (F)

10
 Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

C1.7 and E.17 Understand the meaning of Start with by revising the meaning of positive indices and the basic rules of indices such as 33 × 35 = 38, 54 ÷ 53
indices (fractional, negative = 51 = 5, etc. Give simple examples to revise writing an integer as a product of prime numbers, including writing
and zero) and use the rule of answers using index notation. Try to avoid using 2 as the number you work with initially as this can encourage
indices the misconception that 23 means 2 × 3 because of the exception that is 22 . This exception can be discussed
once the concept is secure.
1
52 = 5
1
An interesting challenge for learners is the puzzle ‘Power Crazy’ on the Nrich website (https://nrich.maths.org).
Find the value of 5–2 , 100 2 , Ask learners to work in groups to complete the challenge. This can be extended to ‘Excel investigation: Power
–2 Crazy’ on the same website. This example also illustrates that a spreadsheet can be used as a tool to make
83 calculations, but we need our brains to solve the problem using reasoning.
Work out 2 –3 × 24 , (23 ) 2 ,
(2 –3 ÷ 24 ) Move on to negative, zero and fractional indices.
2 3
Useful examples are 2=–1
= 2=
2(2–3) 1 and 2= 0
= 2=
2(3–3) 1
2 3
2 23
You can move on to introducing fractional indices by relating them to roots (of positive integers), for example
Use the standard form A × 10n 1 1 1 3
where n is a positive or 4 2 × 4 2 = 41 = 4 so 4=
2
4 2 . The rules of indices can be used to show how values such as 16 4 can be
=
negative integer, and 1 ≤ A < simplified. Learners should try lots of examples and questions. (I)
10. The next step is to introduce standard form. The Maths Is Fun website (www.mathsisfun.com) can be used to
make links between the rules of indices and standard notation. Search for ‘Index notation and powers of 10’ .
Convert numbers into and out
of standard form.
Learners could explore the f following problem:
Calculate with values in Using a = 6 × 103 and b = 3 × 102 determine which of these calculations gives the largest solution and which
standard form. gives the smallest.
a×b a÷b b×a b÷a
It is important learners understand that standard form is way of writing very large and very small numbers. For
example, it is used on a scientific calculator when a number is too large or too small to fit on the screen. Being
able to write numbers in standard form depends on a secure understanding of place value. This understanding
is fundamental in manipulating large and small numbers, both mentally and in written form.

This video ‘Powers of ten and the relative size of things in the universe’ available on the Eames office official
website (www.eamesoffice.com); it is also available on YouTube
(https://www.youtube.com/watch?v=0fKBhvDjuy0). This is very good for helping learners to understand the
concept of magnitude.

11
Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

The next step is to give learners a range of examples showing how to write numbers in standard form and vice-
versa. Emphasise to learners that different calculators display standard form in different ways and check that
they know how to input numbers in standard form into their calculator.

Extend this by using the four rules of calculation with numbers in standard form, both with and without a
calculator. Emphasise common errors, for example, if learners are asked to work out the answer to 2.4 × 104 –
2 × 104 in standard form it is common to see an answer of 0.4 × 104. Point out that although 2.4 × 104 – 2 × 104
= 0.4 × 104 the answer is not in standard form, since 0.4 is less than 1.

Ask learners to try the ‘Standard form worksheet’ from the TES website (www.tes.com).

C1.8 and E1.8 Use the four rules for A good starting activity is to ask learners to work in groups to use four 4s and the four rules for calculations to
calculations with whole obtain all the whole numbers from 1 to 20, e.g. 4 + 4 × 4 – 4 = 16.
numbers, decimals and
fractions (including mixed The next step is to look at long multiplication, and short and long division. You can see the traditional and
numbers and improper repeated subtraction (chunking) examples on the BBC bitesize website
fractions), including correct (www.bbc.co.uk/schools/gcsebitesize/maths); if the link doesn’t work, search for ‘Long multiplication and
ordering of operations and use division’ on the BBC Bitesize website. This should be revision for most but is worth spending a bit of time on to
of brackets. ensure learners are confident in the methods.

Applies to positive and Clarify the order of operations, including the use of brackets. Highlight common errors such as working from left
negative numbers. to right instead of using the order of operations rule, BIDMAS (Brackets Indices Division Multiplication Addition
and Subtraction). Give learners some examples that illustrate the rules for multiplying and dividing with negative
numbers.

Extend this to using the four rules with fractions (including mixed numbers) and decimals. It is important that
learners can do these calculations both with and without the use of a calculator as they may be expected to
show working. learners to try the practice questions. (I)

C1.9 and E1.9 Make estimates of numbers, A simple starting point is to revise rounding numbers to the nearest 10, 100, 1000, etc., or to a set number of
quantities and lengths, give decimal places. Show learners how to round a number to a given number of significant figures, explaining the
approximations to specified difference and similarities between significant figures and decimal places.
numbers of significant figures
and decimal places and round It is helpful to explain common misconceptions such as 43.98 to 1 d.p. is 44.0 not 44. Emphasise that for this
off answers to reasonable syllabus, non-exact answers are required to three significant figures unless the question says otherwise.
accuracy in the context of a Revision of estimating and rounding can be found on the Math.com website (www.math.com); if the link doesn’t
given problem. work, search for ‘Estimating and rounding decimals’.

12
 Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

C1.10 and Give appropriate upper and Start this topic with examples to determine upper and lower bounds for data. Use simple examples and then
E1.10 lower bounds for data given to progressively harder ones, such as: ‘a length, l, measured as 3 cm to the nearest millimetre has lower bound
a specified accuracy, e.g. 2.95 cm and upper bound 3.05 cm’. Emphasise that the bounds, in this case, are not 2.5 and 3.5, which would
measured lengths. be a common misconception. Show learners how this information can be written using inequality signs, e.g.
2.95 cm ≤ l < 3.05 cm.

Obtain appropriate upper and For extended learners, move on to looking at upper and lower bounds for quantities calculated from given
lower bounds to solutions of formulae.
simple problems given data to
a specified accuracy, e.g. the To check their understanding, learners can then try the past paper question. (F)
calculation of the perimeter or
the area of a rectangle. Resource Plus
Skills Pack: Accuracy and bounds

This Skills Pack includes lessons that cover the following:

• accuracy and bounds to the nearest 10, 100 or 1000
• … to 3 decimal places
• … to significant figures
• substituting bounds into formulae.

C1.11 and Demonstrate an Learners will find it useful to have a definition of ratio with a practical demonstration, for example the ratio of
E1.11 understanding of ratio and different coloured beads on a necklace.
proportion.
Look at examples illustrating how a quantity can be divided into a number of unequal parts. For instance: ‘share
Calculate average speed. $360 in the ratio 2 : 3 : 7’. Move on to writing ratios in an equivalent form, e.g. 6 : 8 can be written as 3 : 4,
leading on to the form 1 : n.
Use common measures of
rate. An interesting alternative to exercise questions is the ratio jigsaw called ‘Tarsia – ratio (general)’ on the TES
website (www.tes.co.uk) which learners can work in groups to complete. A fun homework task would be for
To include numerical problems learners to produce their own ‘ratio’ jigsaw. They can produce their own jigsaw using blank equilateral triangles
involving direct and inverse and paper. However, if they prefer to do this task electronically then Tarsia software can be downloaded from
proportion. Use ratio and the internet. (I)
scales in practical situations.
Formulae for other rates will The next step is to look at ratio problems where you are not given the total. For example, ‘Two lengths are in
be given in the question e.g. the ratio 4 : 7. if the shorter length is 48 cm, how long is the longer length?’
pressure and density. Extend this to examples where you are given the difference. For example, ‘The mass of two objects are in the
ratio 2 : 5. One object is 36 g heavier than the other, what is the mass of each object?

13
Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

The Nrich website (https://nrich.maths.org) has a series of problems of different levels of difficulty. Search for
‘ratio and proportion’ to obtain a list. They also have a set of problems on ‘Ratio, proportion and rates of
change’ as well as some short problems; search for ‘Ratio proportion and rates of change – short problems’. (I)

The Maths Is Fun website (www.mathsisfun.com) has a good summary of the difference between direct and
inverse proportion; search for ‘Directly proportional and inversely proportional’.

Two variables are proportional if there is always a constant ratio between them. The constant is called
the constant of proportionality. To express the statement "y is directly proportional to x" mathematically, write
y = cx, where c is the proportionality constant. This can also be written as y ∝ x . To express the statement "y is
inversely proportional to x" mathematically, write an equation y = c or "y is directly proportional to 1 .
x x
1
This can be demonstrated visually by drawing a graph of y against , as per the example here
x
(https://www.desmos.com/calculator/audngjzwg8).

There is a lack of an explicit consensus of the role of a negative constant of proportionality.

Look at drawing graphs to determine whether two quantities are in direct proportion. Ask learners to solve a
variety of problems involving direct proportion by either the ratio method or the unitary method. Look at
quantities in inverse proportion, for example, the number of days to perform a job and the number of people
working on the job. You will be able to link proportion to measures of rate and scales, for example exchange
rates, average speed, density, map scales and other practical examples. For some ideas, read the online blog
‘It started with a map, November 2012’ from colinbillett (https://colinbillett.wordpress.com).
Increase and decrease a For extended learners provide some good examples and questions on increasing and decreasing a quantity by
quantity by a given ratio. a given ratio.

Use specimen paper for question one which includes percentage change and compound interest questions to
check students understanding (F).
Use specimen paper 4, Q1(a) to check students’ ability to apply ratio, percentages and fraction in context and
Specimen Paper 3, Q4(a) (b) to further check their understanding of ratio in context and also compound
interest (F).

C1.12 and Calculate a given percentage The best starting point is to revise converting between percentages and decimals. You can use examples that
E1.12 of a quantity. require the learners to find percentages of quantities, such as: to find 15% of $24 they would calculate 0.15 ×
24 = 3.6 so the answer is $3.60. (Remind learners that in money calculations it is conventional to use 2 d.p. for

14
 Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

Express one quantity as a dollar answers). You should encourage learners to practice mental arithmetic methods too, for example: divide
percentage of another. by 10 to find 10%, halve this to find 5% and add these results to find 15%.

Calculate percentage increase Then, use examples to show how to express one quantity as a percentage of another including where there is a
or decrease. mixture of units.

Extend the work on finding percentages of quantities to looking at how to calculate percentage increases and
decreases. For example, to increase something by 15% you need to multiply by 1.15; to decrease something
by 15% you need to multiply by 0.85. Provide practice examples. (I)
Eliminate the misconception that increasing a quantity by 50% and then decreasing the resulting quantity by
50% leads back to the original value.

Carry out calculations For extended learners you will need to move on to calculations involving reverse percentages. There are two
involving reverse percentages, good videos explaining two different approaches for reverse percentages questions:
e.g. finding the cost price • ‘Reverse percentages’ on YouTube by ‘MrArnoldsMaths’ (https://www.youtube.com/watch?v=OQ9T1-0Up6I)
given the selling price and the • ‘Reverse percentages’ on the B grade maths website (http://bgrademaths.blogspot.co.uk)
percentage profit. Ask learners to compare these methods and to decide which method they think is easier.

The STEM learning website (https://www.stem.org.uk/resources) has an excellent lesson on reverse

percentages; search for ‘Using Percentages to Increase Quantities N7.’ The resource makes links between
percentages, decimals and fractions and represents percentage increase and decrease as a multiplication and
recognises the inverse relationship between increases and decrease. This material tackles the misconception
that an increase of 50% followed by a decrease in 50% will take you back to the original value.

‘Singapore Maths’ bar modelling can be used effectively to visualise reverse percentage problems. The Great
Maths Teaching Ideas website (www.greatmathsteachingideas.com) includes an introduction on how to use a
bar model with basic proportional reasoning problems; search for ‘Bar modelling – a powerful visual approach
for introducing number topics’. This can be easily extended to include reverse percentage problems.

C1.13 and Use a calculator efficiently. Start this topic by using examples to show how to estimate the answer to a calculation by rounding each figure
E1.13 in the calculation to 1 significant figure. Learners then check their estimates by doing the original calculation
Apply appropriate checks of using a calculator. Find good examples and ask learners to practice. (I)
accuracy.
An interesting extension activity, linking this work to percentages, would be to investigate the percentage error
produced by rounding calculations using addition/subtraction and multiplication/division. (You would need to
explain percentage error beforehand.)

15
Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

C1.14 and Calculate times in terms of the A basic starting point would be to revise the units used for measuring time, with examples showing how to
E1.14 24-hour and 12-hour clock. convert between hours, minutes and seconds. It is useful to use television schedules and bus/train timetables
to help with calculations of time intervals, and conversions between 12-hour and 24-hour clock formats.
Read clocks, dials and
timetables. Ask learners to work in pairs or small groups to create a timetable for buses or trains running between two local
towns. To extend a topic that is relatively easy for more able learners, there is an interesting case study online
called ‘Scheduling an aircraft’ on the Centre for Innovation in Mathematics Teaching website (www.cimt.org.uk).

It is useful for learners to look at world time differences and the different time zones. You could ask them to
research and annotate a world map with times in various cities assuming it is 12:00 pm where you live. Times
can be found online at timeanddate.com (www.timeanddate.com) by searching for the worldclock. (I)

A common error associated with time calculations occurs when learners use a calculator and are given a
decimal answer, e.g. ‘5.3’. Make sure your learners understand that this means ‘5 hours 18 minutes’ not ‘5
hours 3 minutes’ or ‘5 hours 30 minutes’. You can illustrate this using the online decimal time converter at
springfrog.com (www.springfrog.com), which can be found by searching for the ‘Convert between hours
minutes & seconds and decimal time’ page.

C1.15 and Calculate using money and Use examples to show how to solve straightforward problems involving exchange rates. It is useful for learners
E1.15 convert from one currency to if you link this work to syllabus section 2.9 (using conversion graphs). Up-to-date exchange rates can be found
another. from a daily newspaper or online.

To check their understanding, learners can then try the past paper question. (F)

Resource Plus
Skills Pack: Unit conversions
The Skills Pack includes lessons on:
• converting between simple units of measure
• area and volume
• compound measures
• interpreting travel and conversion graphs.

C1.16 and Use given data to solve Look at simple problems on personal and household finance, using practical examples where possible. For
E1.16 problems on personal and example, taking information from published tables or advertisements. It would be useful for learners if you
household finance involving introduce a range of simple words and concepts to describe different aspects of finance, such as tax,
earnings, simple interest and percentage profit, deposit, loan.
compound interest.
Two websites with a lot of resources linked to personal finance ranging in difficulty are:

16
 Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

Includes discount, profit and • Young money (www.young-money.org.uk)

loss. • Make money make sense (www.moneymakesense.co.uk)
Both these websites cover the key areas of banks, bills, borrowing, budgeting, debt and wages. The second
Extract data from tables and website also covers ethical considerations. The resources are quite UK-specific in the detail but could easily be
charts. adapted for use in other countries.

Includes discount, profit and Introduce the formula I = PRT, where I = interest earned, P is the investment, R is the percentage rate and T is
loss. the time. Use this formula to solve a variety of problems involving simple interest, including those requiring
learners to use rearranged versions of the formula.
Knowledge of compound
interest formula is required. Learners are required to calculate compound interest, ideally in a single calculation, using the formula:

( )
n
Value of investment = P 1 + r where P is the amount invested, r is the percentage rate of interest and n is
100
the number of years of compound interest. For example, the compound interest earned on an investment of
$500 over 4 years at a rate of 3% interest is 500 × 1.034.

An interesting homework task is to ask learners to research the cost of borrowing money from different banks.
(I)

E1.17 Use exponential growth and Khan Academy (www.khanacademy.org/) provides some good examples to introduce the topic of exponential
decay in relation to population growth and decay; search for ‘Exponential growth & decay word problems’. This site uses the approach n = akt
and finance, e.g. depreciation, where n = number at time t, a is the initial value and k is the rate. Ask learners to compare the similarities
growth of bacteria. between this exponential growth formula and the compound interest formula.

Past and specimen papers

Past/specimen papers and mark schemes are available for the 0580 syllabus to download at www.cambridgeinternational.org/support (F)

C1.1: Paper 32 Jun 2017 Q 4; Paper 11 Jun 2017 Q 6 and 9; Paper 30 Jun 2017 Q 15
E1.1: Paper 41 Jun 2017 Q 10
C1.2: Specimen Paper 1 Q20 and Q21; Paper 21 Jun 17 Q17(a)
C1.3: Paper 12 Jun 2017 Q1 and 6; Paper 33 Jun 2016 Q 6, also consolidates C1.1
E1.3: Specimen Paper 2 Q19 and Q27(b)
C1.4: Paper 11 Jun 2017 Q10; Paper 12 Jun 2017 Q7
C.1.6: Paper 13 Nov 2017 Q5(b); Paper 12 Nov 17 Q5
E 1.10: Paper 21 Jun 17 Q2(d); Paper 22 Jun 16 Q 13
C1.14: Paper 31 Jun 2017 Q6

17
Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

C1.9: Paper 13 Nov 2017 Q10; Paper 21 Nov 17 Q3

C 1.11: Specimen Paper 4 Q1(a); Specimen Paper 3 Q4(a) (b)
E1.11: Specimen Paper 4 Q1
C1.15: Paper 12 Jun 2017 Q19
C1 .16: Paper 12 Jun 2017 Q 23; Specimen Paper 4 Q1 (b) and (c).
E1.16: Specimen Paper 4 Q1 (d)

18
 Scheme of Work

2 Algebra and graphs

Syllabus ref. Learning objectives Suggested teaching activities

C2.1 and Use letters to express An effective start to this topic is revising basic algebraic notation. For example, a + a = 2a, b × c = bc
E 2.1 generalised numbers and (emphasising that cb is the same as bc but that the convention is to write letters in alphabetical order). Also
express basic arithmetic look at simple examples with indices d × d = d2 and e × e × e × e = e4. Explain to learners how to substitute
processes algebraically. numbers into a formula, including formulae that contain brackets.

Substitute numbers for words Ask learners to work in groups to look at the difference between simple algebraic expressions which are often
and letters in formulae. confused. For example, ‘Find the difference between 2x, 2 + x and x2 for different values of x’. Ask learners “is
there a number that makes them all equal?”
Rearrange simple formulae.
Once the basics are secure move on to transforming simple formulae, for example rearranging y = ax + b to
Construct simple expressions make x the subject. Learners need to understand how to construct simple expressions and equations from
and set up simple equations. word problems.

Extension activity: The puzzle ‘Perimeter expressions’ on the Nrich website (https://nrich.maths.org) is an
excellent activity. (I)

Substitute numbers for words For extended learners you will need to build on all of the work above. Moving on to more complicated formulae
and letters in complicated when substituting, for example those with many orders of operations to consider. You can link the work on
formulae. transforming formulae to the work on solving equations, asking learners to think about the balance method
used in both.
Construct and transform
complicated formulae and A useful assessment tool is Paper 21Jun 2013 Q15. (I) Examples of constructing more complicated equations
equations, e.g. transform and expressions can be found in Paper 41 Jun 2013 Q5 (a)(b)(c). (F)
formulae where the subject
appears twice. 2 2 2
The final step is to explain to learners how to transform complex formulae such as x + y = r , s = ut + ½at ,
2

expressions involving square roots, etc. You can use a series of examples to illustrate how to transform
1 1 1
formulae containing algebraic fractions (with possible links to the work in topic 2.3) for example = + .
𝑓𝑓 𝑢𝑢 𝑣𝑣

The most challenging formula to transform, which deserves time spending on it, is where the subject appears
twice. Using examples showing the factorising and dividing through methods, you can discuss the benefits of
each. You can link this work to topic 2.2.
A good past paper question on this topic is Nov 2012 Q16. (F)

19
Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

C2.2 and E2.2 Manipulate directed numbers. An important starting point is to revise all aspects of directed numbers with all four operations and link this to
positive and negative algebraic terms with the four operations. The inability to deal with negative numbers can
Use brackets and extract otherwise cause an unnecessary stumbling block in algebraic work.
common factors, e.g.
expand 3x(2x – 4y) You will need to use examples, with both positive and negative numbers, to illustrate expanding brackets. Start
factorise 9x2 + 15xy simply with a single term being multiplied over a bracket containing two or more terms. Extend this technique to
multiplying two simple linear brackets together for example (x – 3)(x + 7). It may be useful to build on the grid
Expand products of algebraic method of multiplication linked to the partitioning of numbers. Learners may then find it useful to see a 2 × 2
expressions (two brackets algebraic multiplication grid to help with their understanding. It is important to stress the doing and undoing link
only), e.g. expand (x + 4)(x – between expanding brackets and factorising
7); for extended include
products of more than two The next step is to use examples, with both positive and negative numbers, to illustrate factorising simple
brackets, e.g. (x + 4)(x – 7)(2x expressions with one bracket. Explain that factorising is the reverse of expanding.
+ 1)
For extended learners, move on to examples where they will need to find the products of algebraic expressions,
Factorise where possible for example (x2 + 3x – 4)(x – 5). Building on the earlier factorising work, use examples to show learners how to
expressions of the form: factorise three-term quadratic equations, initially where the coefficient of x2 is 1.
ax + bx + kay + kby
a2x2 – b2y2 Include examples of simple difference of two squares, such as x2 – 16, emphasising that these can be solved
a2 + 2ab + b2 using the same method as three-term quadratics bearing in mind that the coefficient of the x term is 0. There
ax2 + bx + c are some good questions to get your learners practicing factorising simple quadratics on slide 5 of the
PowerPoint presentation ‘Factorising quadratic expressions’ on the TES website (www.tes.co.uk).

A really challenging topic is that of factorising quadratics where the coefficient of x2 is not 1. It is worth
spending a considerable amount of time on this topic, including revisiting it throughout the course to ensure
methods are not forgotten. A higher order thinking skill is to ask learners to compare different methods for
tackling a question. This is particularly useful for more able learners. Ask them to compare the two different
methods for factorising quadratics of the form ax2 + bx + c, where a ≠ 1. The first method can be found on slide
16 of the power point presentation listed above, (which uses splitting the x term into two terms and then
factorising by grouping). The second method can be found on Mr Barton Maths website
(http://mrbartonmaths.com) in his eBook ‘The Maths E-Book of Notes and Examples’ in the section ‘More
factorising quadratics’. He uses a trial and error approach.

Finally, give learners example problems requiring them to factorise the difference of two squares, for example
16x2 – 25y2. It is also worth mentioning two-term quadratic factorising examples such as 18x2 – 24x.
Emphasise that these are often poorly answered. Point out that because they are quadratics learners often try
to use two sets of brackets instead of just the one set of brackets required.

20
 Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

E2.3 Manipulate algebraic fractions, Building on the work on factorising in topic 2.2, show learners how to factorise and simplify rational expressions
e.g. 2
such as 2x − 2 x .
(note there is x + x − 4 , 2 x − 3( x − 5) , x − 5x + 6
no C2.3) 3 2 3 2
3a × 9a , 3a ÷ 9a , Provide learners with plenty of examples and questions. It is worth linking this work on simplifying rational
4 10 4 10 expressions to the work on using the four rules with algebraic fractions, so that learners always give the most
1 + 2 simplified answer. (I)
x−2 x−3
You will need to spend time revising adding and subtracting simple fractions with learners, for example 2 + 3 .
Factorise and simplify rational 5 8
2 Explain the process of finding a common denominator by, in this case, multiplying the two denominators. Ask
expressions, e.g. 2x − 2 x
x − 5x + 6 learners to discuss when the lowest common denominator doesn’t need to be the product of the two
denominators, e.g. 3 + 5 .
10 8

The next step is to move on to algebraic fractions starting with numerical denominators, for example x + x − 4 ,
3 2
3( x − 5)
2x − then extending this to algebraic denominators such as 1 + 2 . You will need to emphasise
3 2 x−2 x−3
common errors that occur when subtracting algebraic fractions. For example, in 3 − 4 explain that it is
x−5 x+ 2
common to see sign errors on the numerator when x – 5 is multiplied by –4.

Move on to examples demonstrating multiplying and dividing with numerical fractions, reminding learners that
instead of dividing by a fraction you multiply by its reciprocal.

Extend this by looking at algebraic fractions such as 3a × 9a , 3a ÷ 9a .

4 10 4 10

Provide example questions for learners to practice. Paper 21 Jun 2013 Q22 is also worth doing. (I) (F)

C2.4 ad E2.4 Use and interpret positive, A good starting point is to give learners examples that revise the rules of indices work from Unit 1 topic 1.7.
negative and zero indices. Extend this to using and interpreting positive, negative and zero indices and using the rules of indices with
algebraic terms. For example, simplify: 3x4 × 5x, 10x3 ÷ 2x2, (x6)2.
Use the rules of indices, e.g.
simplify 3x4 × 5x, 10x3 ÷ 2x2,
(x6)2 and for extended

21
Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

1 1 1
learners, e.g. 3 x −4 × 2 x 2 , For extended learners, move on to looking at fractional indices. For example, simplify: 3 x −4 × 2 x 2 , 2 x 2 ÷ 2 x −2 ,
3 3 5
1 3 3
2 x 2 ÷ 2 x −2 ,  2 x 5   2 x 5  , and solving exponential simple equations such as, 32x = 2.
5  3   3 
   

Use and interpret fractional

indices, e.g. 32x = 2

C2.5 and E2.5 Derive and solve simple linear Begin this work with revising how to solve simple linear equations, including those with negatives, for example
equations in one unknown. 3x + 2 = –1. You should also include examples showing how to solve linear equations with brackets such as
5(x + 4) = 3(x + 10).
Derive and solve simultaneous
linear equations in two For a fun active learning resource, ask learners to work in groups to complete the ‘Simple equations jigsaw’
unknowns. activity from the TES website (www.tes.com . Many more jigsaws are available at Mr Barton Maths website
(http://mrbartonmaths.com), which also contains the link for downloading the Tarsia software to view the
Derive and solve simultaneous jigsaws.
equations, involving one linear
and one quadratic. Simultaneous equations can be set up for a range of real life problems. A good introduction to simultaneous
equations is to use a non-algebraic approach that builds on learners’ informal approaches to these problems.
Derive and solve quadratic For example, 3 coffees and 2 teas cost $6.50, and 5 coffees and 2 teas cost $9.50. Showing learners how the
equations by factorisation, simultaneous equation from these statements can be formed and emphasising that the cost of tea and coffee
completing the square and by does not change. You can start with concrete examples and visual images to build on learners informal
use of the formula. understanding. It is important for learners to understand that to solve problems that involve two unknowns it is
necessary for them to have two equations. The aim of solving simultaneous equations is to remove one of the
Derive and solve linear unknowns, then they can approach the problem using what they already know about solving simple linear
inequalities, including equations in one unknown.
representing and interpreting
inequalities on a number line; Extend this by looking at examples to illustrate how to solve simultaneous linear equations with two unknowns
interpretation of results may be by elimination, substitution and finding approximate solutions using graphical methods (linking to topic 2.10).
required. You can use software packages such as Desmos (www.desmos.com) or Geogebra Graphing Calculator
(www.geogebra.org) to allow learners to explore the solutions of simultaneous equations graphically. (I)

Extended learners need solve simultaneous equations involving one linear and one quadratic equation. They
can also be asked to compare the two methods for solving simultaneous equations (elimination and
substitution) and discuss which methods they might use and why for specific examples. In many cases,
substitution may be more appropriate when a quadratic equation is involved.

22
 Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

Extended learners will then need to explore all the different methods for solving quadratic equations, namely by
factorisation, using the quadratic formula and completing the square (for real solutions only). The Maths is Fun
website (www.mathsisfun.com) has a good explanation of completing the square that uses multiple
representations to help secure learners conceptual understanding of the process. (If the link breaks, search
‘Completing the square’.)

The best starting point is using examples of the form ax2 + bx + c = 0 then extend this by looking at equations
requiring rearranging into this form first. Paper 41 Jun 2017 Q8(b), is a good example. (F)(I)

A more challenging activity involves learners needing to construct their own equations from information given
and then solve them to find the unknown quantity or quantities. This could involve the solution of linear
equations, simultaneous equations or quadratic equations.

To introduce the topic of solving linear inequalities, it is a good idea starting with just numbers, for example
7 > 5, showing that that multiplying or dividing an inequality by a negative number reverses the inequality sign,
i.e. –7 < –5.

Use examples to illustrate how to solve simple linear inequalities including representing the inequality on a
number line. Interpretation of results may be required. You can use software packages such as Geogebra
(www.geogebra.org) to create interactive activities for learners to explore and demonstrate their understanding
of inequalities on a number line. You can also explore the resources on the Geogebra website for some
examples by searching for inequalities on a number line. (I)(F)

The most challenging inequalities for learners to solve are those where the inequality needs to be split into two
parts and each part solved separately. Paper 22 Jun 2017 Q13 and Paper 23 Jun 2017 Q16 are good
examples of inequalities questions. (F)

E2.6 Represent inequalities A good starting point is to begin by asking learners to draw several straight lines on a set of axes, possibly on
graphically and use this mini white boards, for example y = 2, x = –5, y = 3x and x + 2y = 10. Ask learners to consider a point on one
(note there is representation to solve simple side of each of these lines, the origin if possible, and use substitution to see if the inequalities y < 2, x > – 5, y <
no C2.6) linear programming problems. 3x and x + 2y > 10 are true for their chosen point. Ask learners to work in groups to do their own examples.

The conventions of using Extend this work by asking learners to look at examples illustrating how to solve linear programming problems
broken lines for strict by graphical means, highlighting the convention of using broken lines for strict inequalities < and > and solid
inequalities and shading lines for the inequalities ≤ and ≥.
unwanted regions will be
expected.

23
Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

Finally, learners will need to understand how to construct inequalities from constraints given, showing that
several possible solutions to a problem exist, indicated by the unshaded region on a graph. Provide learners
with examples and questions.

C2.7 and E2.7 Continue a given number Give learners the definition of a sequence of numbers. Begin by asking them to work in groups to investigate
sequence. some simple sequences, such as finding the next two numbers in a sequence of even, odd, square, triangle or
Fibonacci numbers.
Recognise sequences of
square, cube and triangular Extend this to looking at finding the term-to-term rule for a sequence. For example, the sequence 3, 9, 15, 21,
numbers. 27, ..., has a term-to-term rule of +6; the sequence 40, 20, 10, 5, 2.5, …, has a term to term rule of ÷2.
Learners will need to have some appreciation of the limitations of a term-to-term rule, i.e. that they are not very
Recognise patterns in useful for finding terms that are a long way down the sequence. This leads on nicely to finding the position-to-
sequences including the term term rule for a sequence by examining the common difference, for example the nth term in the sequence 3, 9,
to term rule and relationships 15, 21, 27, …, is 6n – 3.
between different sequences;
subscript notation might be The Nrich website (https://nrich.maths.org) has a nice activity called ‘Seven squares – group worthy task’ that
used. looks at challenges learners to describe generic patterns verbally, numerically and algebraically. It does not
assume prior knowledge of algebra and could be a good way to introduce, practise or assess algebraic fluency.
Find and use the nth term of You could use mini whiteboards or coloured matchsticks to support this activity. (F)
sequences in linear, simple
quadratic and cubic An interesting investigation is to look at square tables placed in a row so that 4 people can sit around one table,
sequences; for extended 6 people can sit around 2 tables joined, 8 people can sit around 3 tables joined, and so on. Ask learners to
learners this is required for work out how many people can sit around n tables. To add an extra challenge, ask learners to investigate
linear, quadratic, cubic and tables of different shapes and sizes, and to try to relate the nth term formula to the practical situation explaining
exponential sequences and how the numbers in the formula relate to the arrangements of the tables. (I)
simple combinations of these.
Extension activity: With more able learners you could look at deriving the formula for a linear sequence with
nth term = a + (n – 1)d where a is the first term and d is the common difference, this formula is not essential
knowledge. (I)

Another approach is looking at patterns and relationships between different sequences. For example, the
sequence 2, 5, 10, 17, 26, …, is the square numbers + 1. You can give learners several examples of these
asking them to find the nth term, using just simple quadratic and cubic sequences, i.e. of the form an2 ± c or an3
± c. (I)

For extended learners, extend the Core work by looking at examples of finding the nth term of harder quadratic
sequences.

24
 Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

Other methods for finding nth terms are possible. Ask learners to search online for alternative methods for
finding nth terms. (I)

Subscript notation may be used. The introduction to sequences on the Maths is Fun website
(http://www.mathsisfun.com) includes an explanation of subscript notation. Search for ‘Sequences’.

Finally, learners will need to look at exponential sequences with a common multiplier (or ratio) instead of a
common difference.

Extension activity: With more able learners, derive the formula for the nth term = ar (n-1) where a is the first
term and r is the common ratio, this formula is not essential knowledge.

E2.8 Express direct and inverse Learners will need to be able to solve a variety of problems involving direct or inverse variation.
(note there is proportion in algebraic terms
no C2.8) and use this form of Encourage efficient notation that moves from the question to each step in turn. For example,
expression to find unknown • y varies directly with x (or y is directly proportional to x) to y ∝ x ⇒ y = kx
quantities. 1
• t varies inversely as the square root of v to v ⇒ t ∝ 2 ⇒ t = 2
𝑘𝑘
𝑣𝑣 𝑣𝑣
where k is a constant.

Emphasise the common error of reversing direct and inverse variation. Once the formula has been established
ask learners to use given values to work out the value of the constant, k, and then use the formulae with the
evaluated k.

E2.9 Use function notation, e.g.

Give learners a definition of a function, f(x): that it is a rule applied to values of x. Look at evaluating simple
(note there is f(x) = 3x – 5, f: x ⟼ 3x – 5, to
functions for specific values, for example linear functions, describing the functions using f(x) notation and
no C2.9) describe simple functions.
mapping notation.
Find inverse functions f –
1(x). The next step is to introduce the inverse function as an operation which ‘undoes’ the effect of a function.
Form composite functions as Demonstrate how learners can evaluate simple inverse functions for specific values, describing the
defined by gf(x) = g(f(x)). functions using the f-1(x) notation and mapping notation. Link this to the work on transforming formulae
from topic 2.1. Explain to learners that to find the inverse of the function f(x) = 2x – 5, a useful method is to
rewrite this as
y = 2x – 5, then to interchange the x and y to get x = 2y – 5, then to make y the subject y = (x + 5)/2 and
finally to re-write using the inverse function notation as f-1(x) = (x + 5)/2.

Using linear and/or quadratic functions, f(x) and g(x), show learners how to form composite functions such
as gf(x), and how to evaluate them for specific values of x. Ask learners to investigate for a variety of

25
Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

different functions gf(x) and fg(x) to see that these are not often the same. Emphasise that it is important
that learners know the correct order to apply the functions.

Provide learners with examples and questions, either prepared yourself or from textbooks.

Extension activity: The video ‘Finding inverse functions: linear’ on the Khan academy website
(www.khanacademy.org) also talks about what the graph of an inverse function looks like. Knowing that the
graph of an inverse function is a reflection in the line y = x is a useful extension for the more able learners.

C2.10 and Interpret and use graphs in A good starting point is to draw and use straight line graphs to convert between different units, for example
E2.10 practical situations including between metric and imperial units, or between different currencies. Exchange rates can be found online and
travel graphs and conversion can be useful for setting questions. Learners need to be confident in solving problems using compound
graphs, e.g. interpret the measures. It will be useful to link this work to the work from topic 1.11 and 1.15.
gradient of a straight line graph
as a rate of change. It is important for learners to be able to draw a variety of graphs from given data, for example to determine
whether two quantities are in proportion, e.g. y and x (or for more able learners y and x2). You will be able to
Draw graphs from given data. link this to the work in topic 2.8 on direct and inverse variation (for extended learners).

Apply the idea of rate of For extended learners, you will want to provide examples of how to draw and use distance–time graphs to
change to simple kinematics calculate average speed (linking this to the calculating gradients work in topic 5.2). Learners should be able to
involving distance–time and interpret the information shown in travel graphs and to be able to draw travel graphs from given data. Ask
speed–time graphs, learners to draw a travel graph for an imaginary journey and to write a set of questions about this journey. For
acceleration and deceleration; example, “What was the average speed?” (I) When learners have drawn their graphs and written their question
may include estimation and they can then give these to other members of a group to answer.
interpretation of the gradient of
a tangent at a point. The STEM learning e-library (https://www.stem.org.uk/resources) has an example of a lesson that can be used
to deepen or assess learners understanding in this section. Search for ‘Interpreting distance–time graphs A6’.
Calculate distance travelled as (I)(F)
area under a speed–time You will need to ensure that learners have studied topic 4.2 and that they can confidently calculate areas of
graph. rectangles, triangles, trapeziums and compound shapes derived from these.

Extend this work by looking at examples of speed–time graphs being used to find acceleration and deceleration
and to calculate distance travelled as area under a linear speed–time graph.

Challenge can be provided by looking at examples where learners are required to convert between different
units. For example, where different units are being used in the question and in the graph.
Resource Plus
Skills Pack: Unit conversions

26
 Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

The Skills Pack includes lessons on:

• converting between simple units of measure
• area and volume
• compound measures
• interpreting travel and conversion graphs.

C2.11 Construct tables of values for Begin this topic by drawing a series of lines with x = constant and y = constant. Ask learners to identify the
functions of the form ax + b, equations of the lines that you have drawn. Emphasise the importance of using a ruler and a sharp pencil in
±x2 + ax + b, a (x ≠ 0), mathematical diagrams throughout this topic.
x
where a and b are integer Move on to examples of drawing diagonal straight-line graphs from a table of values where the gradient and
constants. intercept are integers. You can link this to the work on gradient in topic 5.2.

Draw and interpret such Extension activity: ‘Graphing linear equations’ is an online lesson from math.com (http://www.math.com)
graphs. where learners can work as a group to explore and compare the methods for drawing lines from equations.

Solve linear and quadratic Extend this to looking at drawing quadratic functions of the form ± x2 + ax + b, and simple reciprocal functions
equations approximately, such as
including finding and a (x ≠ 0). Learners should be able to draw a variety of these graphs confidently and accurately from a table of
interpreting roots by graphical x
methods. values.

Recognise, sketch and Introduce the terms parabola and hyperbola (although these are not required).
interpret graphs of functions;
linear and quadratic only. You can then discuss with learners the symmetry properties of a quadratic graph and how this is useful;
Knowledge of turning points is knowledge of turning points is not required.
not required.
The STEM learning e-library (https://www.stem.org.uk/resources) has an example of a good lesson that could
be used to consolidate or assess learners’ ability to identify and interpret different graphs. Search for
‘Interpreting functions graphs and tables’. Note the software mentioned in the lesson is not necessary for the
activity but can enrich it if available. (I)(F)

The next step is to show how the solutions to a quadratic equation may be approximated using a graph. Extend
this work to show how the solution(s) to pairs of equations (for example y = x2 – 2x – 3 and y = x) can be
estimated using a graph. This work can be linked to the work on simultaneous equations from topic 2.5.

E2.11 Construct tables of values and Software drawing packages such as Geogebra (www.geogebra.org) are useful for learners to use to
draw graphs for functions of investigate different features of graphs. Geogebra is free to download.

27
Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

the form axn (and simple sums

of these) and functions of the Start by asking learners to draw functions of the form a/x2; a/x; ax3; ax; where a is a constant, using a graph
form abx + c, where a and c drawing package like Geogebra. Ask learners to work in groups to use the software to gain an awareness of
are rational constants, b is a what each of the different types of graphs look like. Learners should recognise common types of functions from
positive integer, and n = –2, – their graphs, for example from the parabola, hyperbola, quadratic, cubic and exponential graphs.
1, 0, 1, 2, 3; sums would not
include more than three The Maths is Fun website (https://www.mathsisfun.com) can be used to explore the effect of transforming
functions. graphs. Search for ‘Function transformations’. This page explains how all transformations can be done in one
go using the arrangement: af(b(x + c)) + d. Remind students that for quadratic equations completing the square
Solve associated equations arranges the quadratic function in this form.
approximately, including
finding and interpreting roots GeoGebra can be used to allow learners to explore transformations of functions independently, and you can
by graphical methods; Find also find existing examples in the resource section of the Geogebra website. (I)
turning points of quadratics by
completing the square. Once learners understand the effect of transforming a quadratic equation written in the form af(b(x + c)) + d,
they will be able to derive how they find the turning point for different quadratic equations by completing the
Draw and interpret graphs square and relating this to a transformation of the graph of x2.
representing exponential
growth and decay problems. The STEM learning e-library (www.stem.org.uk) has a good resource to consolidate or assess students
understanding of how to use transformations of the graph of x2 to identify key properties such as turning points;
Recognise, sketch and it is called ‘Linking the properties and forms of quadratic functions C1’. (I) (F)
interpret graphs of functions;
linear, quadratic, cubic, The Maths is Fun website (www.mathsisfun.com) also has a useful page describing different asymptotes. This
reciprocal and exponential. includes questions for learners to explore on their own, including detailed explanations to support the solutions.
Learners could explore these questions alongside the use of GeoGebra graphing calculator package. (I)
Knowledge of turning points
and asymptotes is required. Move on to asking learners to draw the graphs from tables of values. A useful video ‘Exponential
function graph’ can found on the Khan academy website (www.khanacademy.org). Extend the work to include
simple sums of not more than three functions in the form axn, where a is a rational constant, and n = –2, –1, 0,
1, 2, 3. Ask learners to solve associated equations approximately using these graphs.

Learners should be encouraged to sketch a range of graphs by recognising key points on these graphs. They
should realise that sketching a graph is different from drawing a graph and that both are useful; they may be
asked to do both. Learners should understand that a sketch of a graph does not need to be 100% accurate and
to scale; it is important however, that the most important features are there and clearly labelled. Questions that
they could be encouraged to ask themselves should include:
• What happens when x = 0? When y = 0?
• What happens when x tends towards infinity?

28
 Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

• Are there any asymptotes? Horizontal? Vertical? Oblique?

• They could also link this to trigonometrical functions by considering whether the graph is going to be
periodic. (Links to topic E6.3).

The final step is to look at examples of how to draw and interpret graphs representing exponential growth and
decay problems. It will be useful to learners to link this to the work from topic 1.17.

E2.12 Estimate gradients of curves Ensure learners have studied topic 5.2 (finding the gradient of a straight line) before beginning this topic.
by drawing tangents.
Learners should already be able to confidently find the gradient of a straight line. Give learners a definition of
the term tangent. Move on to looking at examples that show how to find the gradient at a point on a curve by
drawing a tangent at that point.

E2.13 Understand the idea of a Link this work to work learners have already done on the gradient of a straight line graph and distance–time
graphs. Remind them about the equation for finding the gradient of a straight line.
derived function.
The Maths is Fun website (www.mathsisfun.com) provides good introductions to calculus. Search ‘Introduction
Use the derivatives of to Calculus’ and ‘Introduction to derivatives’.
functions of the form axn, and
simple sums of not more than Introduce learners to this general formula and use this to explore what happens to functions of the
three of these, where a is a form axn as the change in x tends towards zero:
rational constant and n is a
positive integer or 0.  y f ( x + x) − f ( x)
=
x x
Apply differentiation to The STEM learning e-library( www.stem.org.uk) has a good resource that could be used to consolidate or
gradients and turning points assess students understanding of derivatives of functions of the form axn . Search ‘Matching functions and
(stationary points), e.g. 2x3 derivatives’ (I)(F)
+x–7

Discriminate between
maxima and minima by any
method.

Past and specimen papers

Past/specimen papers and mark schemes are available for the 0580 syllabus to download at www.cambridgeinternational.org/support (F)

29
Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

E 2.1: Paper 3 Jun 2017 Q23; Paper 42 Nov 2017Q8

C2.2: Paper 21 Jun 2017Q5
E2.2: Paper 22 Jun 2017 Q22(b)
E2.3: Paper 23 Nov 2017 Q2( c); Paper 21 Nov 2017 Q19
E2.4: Paper 22 Jun 2017 Q22(a)
C2.5: Paper 43 Jun 2017 7(a); Paper 22, Nov 2016 Q8
E2.5: Specimen Paper 2 Q28; Paper 41 Jun 2017 Q8b (Quadratics); Paper 22 Jun 2017 Q13 (Inequality); Paper 23 Jun 2017 Q16(Inequality)
E2.6: Paper 23, Jun 2017 Q11
C2.7: Paper 41, Jun 2017, Q9
E2.8: Paper 22 Jun 2017 Q21
E2.9: Specimen Paper 4 Q7; Paper 41 Nov 2017 Q4; Paper 23 Jun 2017 Q12
E2.11: Specimen Paper 4 Q3(iv)
E2.13: Specimen Paper 4 Q11

30
 Scheme of Work

3 Coordinate geometry

Syllabus ref. Learning objectives Suggested teaching activities

C3.1 and E3.1 Demonstrate familiarity with Revise coordinates in two dimensions. Draw a picture by joining dots on a square grid. Draw x and y axes on
Cartesian coordinates in two the grid and write down the coordinates of each dot. (I)
dimensions.
Ask other learners to draw these pictures from a list of coordinates only.

C3.2 and E3.2 Find the gradient of a straight Use a diagram to help you define a line with a positive gradient as one sloping upwards, and a line with a
line. negative gradient as one sloping downwards.

Calculate the gradient of a Use simple examples to show how to calculate the gradient (positive, negative or zero) of a straight line from
straight line from the a graph using vertical distance divided by horizontal distance in a right-angled triangle:
coordinates of two points on it.
change in y coordinates
gradient =
change in x coordinates

Extend this to consider the gradient of the line x = constant.

Use examples to show how to calculate the gradient of a straight line from the coordinates of two points on it,
change in y coordinates
firstly by drawing the line and then without drawing the line. Use gradient = . Explain
change in x coordinates
the common error of subtracting the coordinates the opposite way around on the numerator to the
denominator causing the sign to be incorrect. The Maths is Fun website (www.mathsisfun.com) has a clear
explanation for this objective. Search “Equation of a line from two points”.

The underground maths website (https://undergroundmathematics.org) uses an interactive applet to help

learners explore how to calculate the gradient of a straight line from the coordinates of two points. You can
use this to arrive at the general formula y−y1=m(x−x1). The link includes a clear explanation and examples,
and links it to the work learners have already done on transformations of graphs (E2.11). Search for ‘The
equation of a straight line’. (I)
Resource Plus
Skills Pack: Straight line graphs
The Skills Pack includes a lesson on finding the gradient of a straight line.

31
Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

E3.3 Calculate the length and the Revise Pythagoras’ theorem from Unit 4. Use examples to show how to calculate the length of a straight line
coordinates of the midpoint of a segment from the coordinates of its end points using a sketch.
(note there is straight line from the
no C3.3) coordinates of its end points. Extension activity: To challenge the learners, do this using the formula �(𝑥𝑥1 − 𝑥𝑥2 )2 + (𝑦𝑦1 − 𝑦𝑦2 )2 .

Use examples to show how to find the coordinates of the midpoint of a straight line from the coordinates of its
end points. Include examples working backwards, e.g. when an end point and a midpoint are known, find the
other end point. (I)

C3.4 and E3.4 Interpret and obtain the Revise drawing a graph of y = mx + c from a table of values. Interpret the meaning of m and c from the
equation of a straight line graph equation using the terms gradient and intercept. Starting with a straight line graph, show how its equation (y =
in the form mx + c) can be obtained. (I)
y = mx + c.
To interpret the meaning of an equation, explain how an equation simply gives the relationship between the x
Problems will involve finding the and y coordinates on the line, e.g. for the equation y = 2x this means the y ordinate is always double the x
equation where the graph is ordinate. Use this to identify if a point lies on the line, e.g. which of these points: (2, 8), (–4, 8), (7, 14), (20,
given. 10), (0, 0) lies on the line y = 2x?

Ask learners to come up similar questions. (I) Then give these questions to others in a group to identify which
points do not lie on a given line.

Resource Plus
Skills Pack: Straight line graphs
The Skills Pack includes a lesson on interpreting and obtaining the equation of a straight line
graph.

C3.5 and E3.5 Determine the equation of a Use examples to show how to find the equation of a straight line parallel to a given line, e.g. find the equation
straight line parallel to a given of a line parallel to y = 4x – 1 that passes through (0, –3).
line.
Resource Plus
e.g. find the equation of a line Skills Pack: Straight line graphs
parallel to y = 4x – 1 that The Skills Pack includes a lesson on determining the equation of a straight line parallel to a
passes through given line.
(0, –3).

32
 Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

E3.6 Find the gradient of parallel and Use examples to show that parallel lines have the same gradient. Include examples where the equation is
perpendicular lines, e.g. given implicitly, e.g. which of these lines are parallel? y = 2x, y + 2x = 10, y – 2x + 3, 2y = 2x + 7, etc.
(note there is
no C3.6) find the gradient of a line Use an odd-one-out activity with three or more examples, where one of the lines is not parallel to the others
perpendicular to y = 3x + 1 and ask learners to identify which one is the odd-one-out and why. Ask learners to come up with their own set
of odd one out examples.
find the equation of a line
perpendicular to one passing Find the gradient of perpendicular lines by using the fact that if two lines are perpendicular the product of their
through the coordinates (1, 3) gradients is –1, e.g. find the gradient of a line perpendicular to y = 3x + 1.
and (–2, –9).
Use a variety of examples linking earlier topics from this unit, e.g. find the equation of a line perpendicular to
one passing through the coordinates (1, 3) and (–2, –9).

You could use the following resources to assess learners’ understanding of this objective along with objective
E.3.2 and C3.4) (I) (F):
• Parallel lines: http://www.mathsisfun.com/algebra/line-parallel-perpendicular.html
• Lots of lines!: https://undergroundmathematics.org/geometry-of-equations/lots-of-lines

Resource Plus
Skills Pack: Straight line graphs
The Skills Pack includes a lesson on finding the gradient of parallel and perpendicular
lines.

Past and specimen papers

Past/specimen papers and mark schemes are available for the 0580 syllabus to download at www.cambridgeinternational.org/support (F)

E3.2: Paper 41 Jun 2017 Q7(a)

C3.4: Specimen Paper 3 Q7(a); Specimen Paper 2 Q5
E3.6: Paper 41 Jun 2017 Q7 (c) and (d)

33
Scheme of Work

4 Geometry

Syllabus ref. Learning objectives Suggested teaching activities

C4.1 and Use and interpret the geometrical Use flashcards at Quizlet (https://quizlet.com) to look at the geometrical terminology.
E4.1 terms: point, line, parallel,
bearing, right angle, acute, Introduce the terminology for bearings, similarity and congruence briefly as similar shapes and three-figure
obtuse and reflex angles, bearings will be studied in more detail in topics 3.4 and 6.1.
perpendicular, similarity and
congruence. Illustrate common solids, e.g. cube, cuboid, tetrahedron, cylinder, cone, sphere, prism, pyramid. Define the
terms vertex, edge and face.
Use and interpret vocabulary of
triangles, quadrilaterals, circles, Explore some geometric solids and their properties on the Illuminations website
polygons and simple solid figures (https://illuminations.nctm.org) (I); search for ‘Geometric solids’.
including nets.

C4.2 and Measure and draw lines and Reinforce accurate measurement of lines and angles through various exercises. For example, each learner
E4.2 angles. draws two lines that intersect. Measure the length of each line to the nearest millimetre and one of the angles
to the nearest degree. Each learner should then measure another learner’s drawing and compare answers.
Construct a triangle given the
three sides using a ruler and a Ask learners to draw any triangle and then measure the three angles and check that they add up to 180°.
pair of compasses only.
Show how to construct a triangle using a ruler and a pair of compasses only, given the lengths of all three
sides. The Maths is fun website (www.mathsisfun.com) has a useful animation, ‘Constructing a triangle with 3
known sides’, to demonstrate.

34
 Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

C4.3 and Read and make scale drawings. Use an example to revise the topic of scale drawing.
E4.3
Show how to calculate the scale of a drawing given a length on the drawing and the corresponding real
length. Point out that measurements do not need to be included on a scale drawing and that many scale
drawings usually have a scale written in the form 1 : n.

Draw various situations to scale and interpret results. For example, ask learners to draw a plan of a room in
their house to scale and use it to determine the area of carpet needed to cover the floor, plan an orienteering
course, etc. (I)

Explore the set of resources on the Khan Academy website (https://www.khanacademy.org/) by searching for
‘scale drawings’.

C4.4 and Calculate lengths of similar If necessary, revise what is meant by ‘similar’ and provide examples. Give learners practice of calculating
E4.4 figures. lengths in similar figures.

For extended learners, expand on the work on calculating lengths of similar figures to using the relationships
Use the relationships between between areas, surface areas and volumes of similar shapes and solids.
areas of similar triangles, with
corresponding results for similar
figures and extension to volumes
and surface areas of similar
solids.

C4.5 and Recognise congruent shapes. Discuss the conditions for congruent triangles. Point out that when naming triangles that are congruent, it is
E4.5 usual to state letters in corresponding order. For example, stating that ΔABC is congruent to ΔEFG implies
that the angle at A is the same as the angle at E.

Extend the work on congruent shapes to introduce similar triangles/shapes. Use the fact that corresponding
sides are in the same ratio to calculate the length of an unknown side. Link this work to work on
transformations since rotation, reflection and translation leave shapes congruent and enlargements form
similar shapes.

Use the basic congruence criteria The Khan Academy website (https://www.khanacademy.org) has a number of resources under ‘Triangle
for triangles (SSS, ASA, SAS, congruence’ that include the basic congruent criteria.
RHS).

35
Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

C4.6 Recognise rotational and line Define the terms line of symmetry and order of rotational symmetry for two dimensional shapes. Revise the
symmetry (including order of symmetries of triangles (equilateral, isosceles) and quadrilaterals (square, rectangle, rhombus, parallelogram,
rotational symmetry) in two trapezium, kite) including considering diagonal properties. Discuss the infinite symmetry properties of a circle.
dimensions. Includes properties
of triangles, quadrilaterals and You can use classifying and ‘odd-one-out’ activities to engage learners with comparing and contrasting the
circles directly related to their properties of these shapes related to their symmetries. An example of this type of activity can be found on the
symmetries. STEM e-library (www.stem.org.uk); search for ‘Classifying shapes SS1’.

For extended learners, define the terms plane of symmetry and order of rotational symmetry for three
E4.6 Recognise symmetry properties dimensional shapes. Use diagrams to illustrate the symmetries of cuboids (including a cube), prisms
of the (including a cylinder), pyramids (including a cone). Look at diagrams for the symmetry properties of a circles
prism (including cylinder) and the paying attention to chords and tangents.
pyramid (including cone).

Use the following symmetry

properties of circles:
• equal chords are equidistant
from the centre
• the perpendicular bisector of
a chord passes through the
centre
• tangents from an external
point are equal in length.

C4.7 and Calculate unknown angles using Revise basic angle properties by drawing simple diagrams that illustrate angles at a point; angles on a straight
E4.7 the line and intersecting lines; angles formed within parallel lines and angle properties of triangles and
following geometrical properties: quadrilaterals.
• angles at a point
• angles at a point on a straight Define the terms irregular polygon, regular polygon, concave and convex. Use examples that include:
line and intersecting straight triangles, quadrilaterals, pentagons, hexagons and octagons. Show that each exterior angle of a regular
lines polygon is 360°/n, where n is the number of sides, and that the interior angle is 180° minus the exterior angle.
• angles formed within parallel Solve a variety of problems that use these formulae. Draw a table of information for regular polygons. Use as
lines headings: number of sides, name, exterior angle, sum of interior angles, interior angle. (I)
• angle properties of triangles
and quadrilaterals Use diagrams to show the angle in a semicircle and the angle between tangent and radius of a circle are 90°.
• angle properties of regular Use the dynamic pages on timdevereux.co.uk to see the circle theorems come to life.
polygons
• angle in a semicircle

36
 Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

• angle between tangent and Provide the solution to an examination style question on the topic of angles that contains a mistake in the
radius of a circle working. Ask learners to identify the mistake.
• angle properties of irregular
polygons For extended learners, move on to look at angle properties of irregular polygons. By dividing an n-sided
• angle at the centre of a circle polygon into several triangles, show that the sum of the interior angles is 180(n – 2) degrees and that the
is twice the angle at the interior and exterior angles sum to 180°.
circumference
• angles in the same segment Explain the theory that angles in opposite segments are supplementary. Investigate cyclic quadrilaterals. For
are equal example, explain why all rectangles are cyclic quadrilaterals. What other quadrilateral is always cyclic? Is it
• angles in opposite segments possible to draw a parallelogram that is cyclic?, etc. Use examples to show that the angle at the centre of a
are supplementary; cyclic circle is twice the angle at the circumference and that angles in the same segment are equal.
quadrilaterals
• alternate segment theorem. Introduce learners to the process of proof by demonstrating one of the circle theorems and then asking them
to reproduce the proof independently, or by creating a proof and then cutting it up and asking learners to
Candidates will be expected to reconstruct it. This second approach can be made more challenging by leaving steps out of the proof for
use the correct geometrical learners to identify and complete. You could also ask learners to provide feedback on exemplars. (I)
terminology when giving reasons
for answers. Solve a variety of problems using all the circle theorems making sure that learners know the correct language
for describing the reasoning for their answers.

Past and specimen papers

Past/specimen papers and mark schemes are available for the 0580 syllabus to download at www.cambridgeinternational.org/support (F)

C4.2: Specimen Paper Q10

C4.4: Paper 12 Jun 2017 Q18
E4.4: Paper 21 Jun 2017 Q11; Paper 21 Nov 2017 Q20
C4.5: Specimen Paper 3 Q9(c)
C4.7: Paper 21 Jun 2017 Q14
E4.7: Paper 22 Jun 2017 Q26; Specimen Paper 2 Q26

37
Scheme of Work

5 Mensuration

Syllabus ref. Learning objectives Suggested teaching activities

C5.1 and Use current units of mass, length, A good starting point is to use practical examples to illustrate how to convert between: millimetres,
E5.1 area, volume and capacity in centimetres, metres and kilometres; grams, kilograms and tonnes; millilitres, centilitres and litres. For
practical situations and express example, by looking at various measuring scales.
quantities in terms of larger or
smaller units. Extend this work to look at converting between units of area mm2, cm2 and m2 and volume mm3, cm3 and m3.

Convert between units including More able learners will probably find it interesting to explore the link between the work on converting between
units of area and volume. area units to the work on ratio and similar shapes, and can look at using scales on maps to work with areas.

Resource Plus
Skills Pack: Unit conversions
The Skills Pack includes lessons on:
• converting between simple units of measure
• area and volume
• compound measures
• interpreting travel and conversion graphs.

C5.2 Carry out calculations involving Begin this topic by reminding learners how to calculate the perimeter and area of a rectangle, square and a
the perimeter and area of a triangle. This can be extended to look at how to calculate the area of a parallelogram and a trapezium, and a
rectangle, triangle, parallelogram variety of compound shapes.
and trapezium and compound
shapes derived from these. An interesting investigation is to look at using isometric dot paper to find the area of shapes that have a
perimeter of 5, 6, 7, ... , units.

Ask learners to find out what shape quadrilateral has the largest area when the perimeter is, for
example 24 cm.

C5.3 and Carry out calculations involving A useful starting point is revising how to calculate the circumference and area of a circle, using straightforward
E5.3 the circumference and area of a examples. Learners are expected to know the formulae.
circle; Answers may be asked for
in multiples of π. Extend this by looking at how to find compound areas involving circles, for example, a circle with the radius of
5.3 cm is drawn touching the sides of a square. Ask learners “What area of the square is not covered by the
Solve simple problems involving circle?” the question can be extended to consider the area of waste material when cutting several circles of
the arc length and sector area as this size out of an A4 sheet of paper. (I)
fractions of the circumference and
38
 Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

area of a circle; (for Core, where The Khan academy website (www.khanacademy.org) includes a good explanation of arc length and sector
the sector angle is a factor of area. Search ‘Arc length from subtended angle’ and ‘Area of a sector’. The quiz for arc length includes
360). challenge questions to check learners’ understanding. (F)

The next step is to use examples to illustrate how to calculate the arc length and the sector area by using
fractions of full circles. Learners will need to combine their work on sector area with area of a triangle work
(syllabus reference 6.3) to find segment areas.

C5.4 Carry out calculations involving Starting with simple examples, draw the nets of a variety of solids asking learners if they are able to identify
the surface area and volume of a the solid from the net. It is useful for learners to understand that there are many different right and wrong
cuboid, prism and cylinder; ways to draw the net of a cube. Less able learners might appreciate the opportunity to work in groups to draw
answers may be asked for in nets on card and to use these to make various geometrical shapes.
multiples of π.
Next, demonstrate a purpose and use for drawing nets. For example, in the packaging industry there are
Carry out calculations involving many different interesting nets used to create boxes, particularly those that require little or no glue. An
the surface area and volume of interesting homework activity would be to ask learners to collect lots of different packaging boxes to
a sphere, pyramid and cone; investigate the nets used to create them.
formulae will be given for the
surface area and volume of the You can then ask learners to look at how to calculate the surface area of a cuboid and a cylinder, using the
sphere, pyramid and cone in the nets to help. Extend this to illustrating how to calculate the volume of a cuboid and a variety of prisms,
question. including cylinders. Learners will find it useful to know the formula volume of prism = cross-sectional area ×
length. A useful resource on this topic can be found on the Annenberg learner website (www.learner.org);
‘Geometry 3D shapes > surface area’.

Move on to using nets to illustrate how to calculate the surface area of a triangular prism, a pyramid and a
cone. It will be useful for learners to understand how to obtain the formula π r(r + s) for the surface area of a
cone (where s = slant length). You will also want to explain how to calculate the surface area of a sphere
using the formula 4πr2.
1
Use examples to illustrate how to calculate the volume of a pyramid (including a cone) using the formula ×
3
4
area of base × perpendicular height. Also look at how to calculate the volume of a sphere using the formula
3
π r3. Diagrams and formulae can be found at www.thoughtco.com; search for ‘Math Formulas for Geometric
Shapes’. Emphasise to learners that they should know which formulae to learn and which will be given. Whilst
some formulae will be given, you could challenge those with good memories to learn the given formulae too.

39
Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

C5.5 Carry out calculations involving The final section is all about extending all the work from sections 4.1 to 4.4 to find the surface area and
the areas and volumes of volume of a wide variety of composite shapes.
compound shapes; answers may
be asked for in multiples of π.

Past and specimen papers

Past/specimen papers and mark schemes are available for the 0580 syllabus to download at www.cambridgeinternational.org/support (F)

C5.1: Paper 23 Nov 2017 Q10

E5.3: Paper 42 Jun 17 Q5(b) and (c); Paper 22 Nov 2017 Q23
C5.4: Paper 41 Jun 2017 Q5; Paper 42 Nov 2017 Q2
C5.5: Paper 42, Nov 2017, Q2

40
 Scheme of Work

6 Trigonometry

Syllabus ref. Learning objectives Suggested teaching activities

C6.1 and Interpret and use three-figure Introduce three-figure bearings and use examples of measuring and drawing involving bearings. You may
E6.1 bearings; measured clockwise want to link this work to that on scale drawings in topic 3.3.
from the North, i.e. 000°–360°
Use examples to show how to calculate bearings, e.g. calculate the bearing of B from A if you know the
bearing of A from B.

Use a map to determine distance and direction (bearing) between two places, e.g. learners’ home and school,
etc. Maps from around the world can be found online at maps.google.com (I)

C6.2 and Apply Pythagoras’ theorem and Revise squares and square roots. Use simple examples involving right-angled triangles to illustrate
E6.2 the sine, cosine and tangent Pythagoras’ theorem. Start with finding the length of the hypotenuse then move on to finding the length of one
ratios for acute angles to the of the shorter sides. See ‘Pythagoras’ theorem’ examples on the Maths is fun website (www.mathsisfun.com).
calculation of a side or of an
angle of a right-angled triangle. This could be extended by exploring some of the ‘Pythagoras proofs’ on the Nrich website
(https://nrich.maths.org).
Angles will be quoted in degrees.
Answers should be written in Extend this work to cover diagrams where the right-angled triangle isn’t explicitly drawn, or the problem is
degrees and decimals to one presented without a diagram, e.g. ‘find the diagonal length across a rectangular field or the height of a
decimal place. building’. You may also want to use examples of triangles in different orientations and where the labels are
different. For example, where the hypotenuse is labelled a not c. This will check whether students really
understand the theorem or whether they are just following a prescribed routine. (F)

When introducing trigonometry, spend some time on labelling the sides of triangles with a marked angle:
adjacent, hypotenuse and opposite. Ask learners to work in groups to draw right-angle triangles with a 30°
angle of various sizes. Learners work out the ratio ‘opposite side ÷ adjacent side’ for all the different triangles
to find they should all be a similar value.

Then use examples involving the sine, cosine and tangent ratios to calculate the length of an unknown side of
a right-angled triangle given an angle and the length of one side. Use a mix of examples, some examples
where division is required and some examples where multiplication is required. For learners who struggle with
rearranging the trigonometrical ratios it is possible to use the ‘formula triangle approach’.

For more able learners, encourage the rearranging approach. Move on to examples involving inverse ratios to
calculate an unknown angle given the length of two sides of a right-angled triangle.

41
Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

Solve a wide variety of problems in context using Pythagoras’ theorem and trigonometric ratios (include work
with any shape that may be partitioned into right-angled triangles). (I)

Solve trigonometric problems in Use examples to illustrate how to solve problems involving bearings using trigonometry. (F)
two dimensions involving angles
of elevation and depression. For extended learners define angles of elevation and depression. Use examples to illustrate how to solve
problems involving angles of elevation and depression using trigonometry.
Know that the perpendicular
distance from a point to a line is Draw a sine curve and discuss its properties. Use the curve to show, for example, sin 150° = sin 30°. Repeat
the shortest distance to the line for the cosine curve.

E6.3 Recognise, sketch and interpret Build on the work learners did recognising and interpreting graphs of functions (E2.11). Learners need to
(note there is graphs of simple trigonometric know the values of sin(θ), cos(θ) and tan(θ) for θ = 0, 30, 60, 90, and 180. The Khan Academy website
no C6.3) functions. (www.khanacademy.org) includes a useful proof ‘Trig ratios of special triangles’.

Use the unit circle to help learners understand the relationship between different trigonometric equations, for
Graph and know the properties of example cos 30° and cos 150°. The Maths is Fun web site (www.mathsisfun.com) demonstrates this well
trigonometric functions. with a useful ‘Unit circle’ applet:

Solve simple trigonometric http://www.mathsisfun.com/geometry/unit-circle.html

equations for values between 0° http://www.mathsisfun.com/algebra/trig-interactive-unit-circle-flash.html
3 www.khanacademy.org/math/trigonometry/unit-circle-trig-func) includes ‘The unit circle definition of sine,
and 360°, e.g. sin x = for
2 cosine, and tangent.’ It uses radians consistently, so introduce radians to learners if using this site
values of x between 0° and 360°.
‘Tangled Trig Graphs’ is a problem on the Nrich website (https://nrich.maths.org) that will be accessible to
learners who have studied the unit circle and transformations of graphs (E2.11)

E6.4 Solve problems using the sine Rearrange the formula for the area of a triangle 1 bh to the form 1 ab sin C (http://regentsprep.org has a
and cosine rules for any triangle 2 2
and the formula useful resource to support this). Illustrate its use with a few simple examples. Explain that the letters in the
1
area of triangle = ab sin C, formula may change from problem to problem, so learners should try to remember the pattern of two sides
2
and the sine of the included angle.
E.g. sin x =
3 for values
2 Extend this to see if learners can use the formula to work out other problems, e.g. ‘calculate the area of a
between 0° and 360°; includes segment of a circle given the radius and the sector angle’ (using their knowledge of sector area work from
problems involving obtuse angles. topic 4.3) or ‘calculate the area of a parallelogram given two adjacent side lengths and any angle’. (I)

42
 Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

𝑎𝑎 𝑏𝑏
Use examples to show how to solve problems using the sine rule, explaining that the version = is
sin 𝐴𝐴 sin 𝐵𝐵
sin 𝐴𝐴 sin 𝐵𝐵
preferable for finding a side and the version = is preferable for finding an angle.
𝑎𝑎 𝑏𝑏

Use examples to show how to solve problems using the cosine rule. Make sure that learners either learn both
rearrangements of the formula:
• to find a side a2 = b2 + c2 – 2bccosA
𝑏𝑏2 +𝑐𝑐 2 −𝑎𝑎2
• to find an angle cosA =
2𝑏𝑏𝑏𝑏
or can confidently rearrange from one to the other.

Give learners a set of questions where they can either use the sine rule or the cosine rule. Ask them not to
work out the answers but instead to decide which rule to use. Explain how learners can tell whether they need
the sine rule or the cosine rule, i.e. use the cosine rule when you know all three sides in a triangle or an
enclosed angle and two sides, otherwise use the sine rule.

The Maths is Fun website (www.mathsisfun.com) has a useful page on ‘Area of triangles without right angles’.

E6.5 Solve simple trigonometrical Introduce problems in three dimensions by finding the length of the diagonal of a cuboid and determining the
problems in three dimensions angle it makes with the base. Extend by using more complex figures, e.g. a pyramid.
including angle between a line
and a plane.

Past and specimen papers

Past/specimen papers and mark schemes are available for the 0580 syllabus to download at www.cambridgeinternational.org/support (F)

C6.1: Paper 41 Jun 2017 Q8

E6.2: Paper 43 Jun 2017 Q9 (a) and (b)
E6.3: Specimen Paper 4 Q8
E6.4: Paper 41 Nov 2017 Q10(a)
E6.5: Paper 21 Jun 2017 Q13

43
Scheme of Work

7 Vectors and transformations

Syllabus ref. Learning objectives Suggested teaching activities

C7.1 and Describe a translation by using a Use the concept of translation to explain a vector. Use simple diagrams to illustrate column vectors in two
E7.1 vector represented by dimensions, explaining the significance of positive and negative numbers.
�����⃗, or a.
e.g. �𝑦𝑦𝑥𝑥 �, 𝐴𝐴𝐴𝐴
Introduce the various forms of vector notation.
Add and subtract vectors.
Show how to add and subtract vectors algebraically by making use of a vector triangle.
Multiply a vector by a scalar.
Show how to multiply a column vector by a scalar and illustrate this with a diagram.

The ‘vector journeys’ problem on the Nrich website (https://nrich.maths.org) gives learners the opportunity to
explore the use of vectors. There are also support and extension activities linked to this resource.

C7.2 and Reflect simple plane figures in Draw an arrow shape on a squared grid. Use this to illustrate the following: reflection in a line (mirror line);
E7.2 horizontal or vertical lines. rotation about any point (centre of rotation) through multiples of 90° (in both clockwise and anti-clockwise
directions); and translation by a vector. Several different examples of each transformation should be shown.
Rotate simple plane figures about Use the word image appropriately.
the origin, vertices or midpoints of
edges of the figures, through Investigate how transformations are used to make tessellations and produce an Escher-type drawing. For
multiples of 90°. inspiration and step by step guides, see the website www.tessellations.org. (I) Ask learners to research the
work of Maurits Cornelis Escher linked to tessellations; this can be set at homework. (I)
Construct given translations and
enlargements of simple plane Use a pre-drawn shape on (x, y) coordinate axes to complete several transformations using the equations of
figures; positive and fractional lines to represent mirror lines and coordinates to represent centres of rotation. Work with (x, y) coordinate
scale factors for enlargements axes to show how to find: the equation of a simple mirror line given a shape and its (reflected) image; the
only; also includes negative scale centre and angle of rotation given a shape and its (rotated) image; and the vector of a translation. Emphasize
factors for enlargements for all the detail that is required to describe each of the transformations.
extended learners.
Draw a triangle on a squared grid. Use this to illustrate enlargement by a positive integer scale factor about
Recognise and describe any point (centre of enlargement). Use both methods: counting squares and drawing rays. Show how to find
reflections, rotations, translations the centre of enlargement given a shape and its (enlarged) image.
and enlargements; positive and
fractional scale factors for
enlargements only; also includes
negative scale factors for
enlargements for extended
learners.

44
 Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

E7.3 Calculate the magnitude of a Revise the work from section 7.1. Use diagrams to help illustrate how to calculate the magnitude of a vector;
(note there is 𝑥𝑥 link this to the work on Pythagoras’ theorem from topic 6.2.
vector �𝑦𝑦� as �𝑥𝑥 2 + 𝑦𝑦 2
no C7.3)
�����⃗ or a for vectors and for their magnitudes �𝐴𝐴𝐴𝐴
Explain the notation required, i.e. 𝐴𝐴𝐴𝐴 �����⃗�or |a| (with modulus signs).
Represent vectors by directed
line segments.
Define a position vector and solve various problems in vector geometry. Explain to learners that in their
answers to questions, they are expected to indicate a in some definite way, e.g. by an arrow or by underlining,
Use the sum and difference of
�����⃗ or a.
thus 𝐴𝐴𝐴𝐴
two vectors to express given
vectors in terms of two coplanar
vectors.

Use position vectors.

�����⃗, or a
Vectors will be printed as 𝐴𝐴𝐴𝐴
and their magnitudes denoted by

modulus signs, e.g. AB or a .

Past and specimen papers

Past/specimen papers and mark schemes are available for the 0580 syllabus to download at www.cambridgeinternational.org/support (F)

C7.1: Paper 11 Jun 2017 Q13

C7.2: Paper 42 Jun 2017 Q 2(a)
E7.3: Paper 21 Jun 2017 Q18

45
Scheme of Work

8 Probability

Syllabus ref. Learning objectives Suggested teaching activities

C8.1 and Calculate the probability of a Use theoretical probability to predict the likelihood of a single event. For example, find the probability of
E8.1 single event as either a fraction, choosing the letter M from the letters of the word MATHEMATICS. Use the formula:
decimal or percentage.
probability = favourable outcomes
Problems could be set involving possible outcomes
extracting information from tables
or graphs. Discuss when fractions, decimals or percentages are preferable for representing probabilities, e.g. if the
probability is 2 then a fraction is preferable because it is exact.
3

Learners use example questions that you’ve prepared or from textbooks. (I)

C8.2 and Understand and use the Discuss probabilities of 0 and 1, leading to the outcome that a probability lies between these two values.
E8.2 probability scale from 0 to 1. Revise the language of probability associated with the probability scale. Use the probability scale by
estimating frequencies of events occurring based on probabilities.

Ask learners to produce their own probability scale with events marked on it. Fix a string across the room. On
one end, attach a card that says ‘Certain’ and on the other end attach a card that says ‘Impossible’. In
between, attach cards ‘Fairly likely’, ‘Very likely’, ‘Not very likely’, ‘Equally likely’ and others, if wanted. Pre-
prepare cards that refer to each of the learners in the group and some to events that are either topical or of
interest to the learners. It is useful if one card refers to an event that is almost certain and another to
something that is almost impossible. Attach the topical event cards anywhere on the string between ‘Certain’
and ‘Impossible’. Ask learners to discuss among themselves the order in which they should appear. Next,
label the ‘Impossible’ card as ‘Probability 0’ and the ‘Certain’ card as ‘Probability 1’ and explain that
probabilities are measured between 0 and 1. Ask for suggestions for numerical values (in decimals or
fractions) for the topical card events. Write these values on blank cards and attach them above the event
cards.

Ask learners to find out the meaning of mutually exclusive and exhaustive. (I)

C8.3 Understand that the probability of Use examples to show that the ‘probability of an event occurring = 1 – the probability of the event not
an event occurring = 1 – the occurring’, including those where there are only two outcomes and those when there are more than two
probability of the event not outcomes.
occurring.

46
 Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

C8.4 and Understand relative frequency as Compare estimated experimental probabilities, or relative frequency, with theoretical probabilities. Learners
E8.4 an estimate of probability. need to recognise that when experiments are repeated different outcomes may result, and increasing the
number of times an experiment is repeated generally leads to better estimates of probability.
Expected frequency of
occurrences. Conduct a class experiment into rolling dice 300 times, e.g. 15 pairs of learners rolling a dice 20 times each.
Collect and combine results from groups to create a large sample set, show how estimates change as more
data is added to the set.

Repeat the experiment where the theoretical probability is not known, e.g. the chance of a drawing pin landing
point down when thrown in the air. Try ‘Buffon’s Needle’ activity on the Maths is fun website
(hwww.mathsisfun.com).

Carry out experiments to sample the number of unknown coloured counters in a bag. Ask learners to suggest
how many of each type of coloured counter there are in the bag, given the known total.

C8.5 Calculate the probability of simple Roll two different dice, or spin two spinners, and list all the outcomes. Use simple examples to illustrate how
combined events, using possibility possibility diagrams and tree diagrams can help to organise data.
diagrams, tree diagrams and
Venn diagrams. Use possibility diagrams and tree diagrams to help calculate probabilities of simple combined events, paying
close attention to how diagrams are labelled.
In possibility diagrams,
outcomes will be represented The article ‘Probability calculations from tree diagrams’ on the Nrich website (https://nrich.maths.org/9648)
by points on a grid, and in tree suggests a set of activities that introduce students to combined events in an intuitive way using tree diagrams
diagrams, outcomes will be as a means of recording and visualising the outcomes of combined events. The examples are set at different
written at the end of branches levels of complexity.
and probabilities by the side of
the branches. The article ‘Tree diagrams, 2-way Tables and Venn Diagrams’ also on the Nrich website
For Core, Venn diagrams will be (https://nrich.maths.org/9861) considers a range of diagrammatic representations for probability. The
limited to two sets. resources include some detailed examples of how different representations could be used to support the
solution to example problems. These could be used to stimulate discussion with learners.
Resource Plus
Skills Pack: Probability of combined events
The Skills Pack includes lessons on:
• possibility space diagrams
• area and volume
• drawing and interpreting tree diagrams
• tree diagrams & more complex probabilities.

47
Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

E8.6 Calculate conditional probability Try the ‘In a box’ probability problem on the Nrich website (https://nrich.maths.org/919). (I)
using Venn diagrams, tree
diagrams and tables. Resource Plus
Skills Pack: Probability of combined events
For example, two dice are rolled. The Skills Pack includes a lesson on conditional probability, and tree diagrams & more
Given that the total showing on complex probabilities.
the two dice is 7, find the
probability that one of the dice
shows the number 2.

Past and specimen papers

Past/specimen papers and mark schemes are available for the 0580 syllabus to download at www.cambridgeinternational.org/support (F)

C8.1: Paper 32 Jun 2017 Q3(a)

C8.3: Paper 12 Jun 2017 Q2; Paper 33 Jun 2017 Q7 (d(i))
C8.4: Paper 33 Jun 2017 Q7(d(ii)); Paper 43 Jun 2017 Q5 (c)
C8.5: Specimen Paper 2 Q22; Paper 23 Jun 2017 Q6
E8.6: Specimen Paper 4 Q2(b(iii)); Paper 42 Jun 2017 Q6

48
 Scheme of Work

9 Statistics

Syllabus ref. Learning objectives Suggested teaching activities

C9.1 and Collect, classify and tabulate Use simple examples to revise collecting data and presenting it in a frequency (tally) chart. For example,
E9.1 statistical data. record the different makes of car in a car park, or record the number of words on the first page of a series of
different books.

Ask learners to conduct an experiment of this type, tabulating their data.

Use examples to classify data using statistical terminology, e.g. discrete, continuous, numerical (quantitative),
non-numerical (qualitative). Use examples to show how to draw simple inferences from statistical diagrams,
and tables including two-way tables.

C9.2 and Read, interpret and draw simple Explore the Gapminder website (https://www.gapminder.org/) for some interesting ways of displaying data
E9.2 inferences from tables and and access to a wide range of data sets.
statistical diagrams.
Learners can be encouraged to bring in examples of data used in the media. Discuss how the data is
represented. Is it designed to be informative, or to deliver a particular message, or to sell something?
Compare sets of data using
tables, graphs and statistical
‘Interpreting Bar Charts, Pie Charts, Box and Whisker Plots S5’ on the STEM learning website
measures.
(www.stem.org.uk) gives learners the opportunity to interpret bar charts and pie charts, and helps them
appreciate the benefits and limitations of these representations. The second part of the resource also
Appreciate restrictions on drawing compares box-and-whisker plots, which his useful for topic E9.6.
conclusions from given data.

C9.3 and Construct and interpret bar Use the data collected in the activity recommend for topic 9.1 to construct a pictogram, a bar chart and a pie
E9.3 charts, pie charts, pictograms, chart. Point out that the bars in a bar chart can be drawn apart.
stem-and-leaf diagrams, simple
frequency distributions, Use an example to show how discrete data can be grouped into equal classes. Draw a histogram to illustrate
histograms with equal intervals the data (i.e. with a continuous scale along the horizontal axis). Point out that this information could also be
and scatter diagrams. displayed in a bar chart (i.e. with bars separated) because data is discrete.

Investigate the length of words used in two different newspapers and present the findings using statistical
diagrams (links to newspapers can be found online at http://onlinenewspapers.com).

Record sets of continuous data, e.g. heights, masses, etc., in grouped frequency tables. Use examples that
illustrate equal class widths for core learners and unequal class widths for extended learners. Draw the
corresponding histograms. Emphasize the fact that for continuous data bars of a histogram must touch.

49
Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

Extended learners also cover On the Mr Barton Maths website eBook ‘The Maths E-Book of Notes and Examples’
histograms with unequal intervals; (http://mrbartonmaths.com), there is a section on bar charts and histograms. Use this section to illustrate to
for unequal intervals on extended learners why frequency density is a fairer way to represent data than frequency on the vertical axis.
histograms, areas are Label the vertical axis of a histogram as ‘frequency density’ and show that the area of each bar is proportional
proportional to frequencies and to the frequency. Show how to calculate frequency densities from a frequency table with grouped data and
the vertical axis is labelled how to calculate frequencies from a given histogram.
‘frequency density’.
Explain how to draw scatter diagrams with simple examples (you may choose to do this at the same time as
topic 9.6).
Explore the Gapminder website (https://www.gapminder.org/) for innovative approaches to scatter diagrams
and videos that you could use to engage learners using some real life topical contexts.

C9.4 and Calculate the mean, median, Show how to work out the mean, the median and the mode from a list of data or from a frequency table.
E9.4 mode and range for individual
and discrete data and distinguish Explain that if there are two middle values, they need to find the half-way point for the median, because there
between the purposes for which can only be one median but that there can be more than one mode or no mode.
they are used.
Use simple examples to highlight how these averages may be used. For example, in a discussion about
average salaries the owner of a company with a few highly paid managers and a large work force may wish to
quote the mean wage rather than the median. ‘Mean, median and mode’ on the mathsteacher.com website
(www.mathsteacher.com) has examples of when to use the different averages for different situations.

Use the ‘Life Expectancy’ PowerPoint and resources on the Gapminder website (https://www.gapminder.org/)
to explore averages in a topical real-life situation.

Include examples where the mean is given and the number of people, total or an individual value needs to be
found.

Explain how the mode can be recognised from a frequency diagram.

50
 Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

E9.5 Calculate an estimate of the Use examples to show how to calculate an estimate for the mean of data in a grouped frequency table using
mean for grouped and continuous the mid-interval values. Explain how the modal class can be found in a grouped frequency distribution.
data.
Look at the examples and questions on the ‘Centre for innovation in mathematics teaching’ website
Identify the modal class from a (http://www.cimt.org.uk/). (I)
grouped frequency distribution.
The Maths is Fun website (www.mathsisfun.com) has a good explanation of how to estimate the mean for
grouped data, including identifying the modal class. See ‘Mean, Median and Mode from Grouped
Frequencies’.

Extension activity: Explain how to find the interval that contains the median; for more able learners you
could show them the idea of linear interpolation.

E9.6 Construct and use cumulative Explain cumulative frequency and use an example to illustrate how a cumulative frequency table is
frequency diagrams. constructed. Draw the corresponding cumulative frequency curve emphasising that points are plotted at upper
class limits; the curve must always be increasing; and highlight its distinctive shape. Explain that this can be
Estimate and interpret the approximated by a cumulative frequency polygon.
median, percentiles, quartiles and
inter-quartile range. Use a cumulative frequency curve to help explain and interpret percentiles. Introduce the names given to the
25th, 50th and 75th percentiles and show how to estimate these from a graph. Show how to estimate the
Construct and interpret box-and- inter-quartile range from a cumulative frequency diagram. Explain how to use a cumulative frequency curve to
whisker plots. complete a frequency table.

‘Interpreting frequency graphs, cumulative frequency graphs, box and whisker plots S6’ on the Stem learning
website (www.stem.org.uk) gives learners the opportunity to interpret simple frequency distributions and
cumulative frequency diagrams, including using box-and-whisker diagrams, to display the median,
percentiles, quartiles and inter-quartile range.

The second part of the ‘Interpreting Bar Charts, Pie Charts, Box and Whisker Plots S5’ on the STEM learning
website (www.stem.org.uk) compares box-and-whisker plots.

Use specimen Paper 2, Q24 (reference also to E1.16 Personal and household finances). (I) (F)

51
Scheme of Work

Syllabus ref. Learning objectives Suggested teaching activities

C9.7 and Understand what is meant by Use simple examples of scatter diagrams to explain the terms and meanings of positive, negative and zero
E9.7 positive, negative and zero correlation. Revise drawing scatter diagrams and describe the resulting correlation. Explain why and where
correlation with reference to a scatter graphs are useful, e.g. in making predictions.
scatter diagram.
Ask learners to collect some bivariate data of their choice and to predict the correlation, if any, that they
expect to find. For example, height and arms span for members of the class. Use collected data to draw a
scatter diagram and to then look for the expected correlation. Discuss the results.

You could use the ‘How does income relate to life expectancy’ presentation on the Gapminder website
(https://www.gapminder.org/) to demonstrate the use of correlation to explore social problems.

Explain that if there are too few points on a scatter diagram a correlation may appear apparent when in fact
there is no real relationship between the variables. Learners should understand that a correlation does not
prove cause and effect it just provides evidence to support a potential relationship and/or identify an area for
further research. For example, it may be that a third unidentified variable is causing the apparent correlation.
Learners could do a web search for the ‘Televisions, Physicians, and Life Expectancy’ problem to
demonstrate this phenomenon. (I)

The ‘David and Goliath’ problem on the Nrich website (https://nrich.maths.org/7360) is a nice activity. (I)

C9.8 and Draw, interpret and use lines of Explain, with diagrams, that the purpose of a good line of best fit is to have the sum of the vertical distances
E9.8 best fit by eye. from each point to the line as small as possible. In simpler terms, ask learners to aim for a similar number of
points on each side of the line and as many points as possible on the line or as close to it as possible.

Draw diagrams showing bad lines of best fit explaining what is wrong with them. For example, a common
error made by learners is to draw the line of best fit through the origin when that doesn’t fit with the trend of
the data.

Past and specimen papers

Past/specimen papers and mark schemes are available for the 0580 syllabus to download at www.cambridgeinternational.org/support (F)

C9.1: Paper 13 Jun 2017 Q6; Paper 32 Jun 2017 Q3(a)

C9.3: Paper 31 Jun 2017 Q3(a(i,ii,iii)); Specimen Paper 1 Q3
E9.3: Paper 42 Jun 2017 Q3; Paper 43 Jun 2017 Q 5
E9.5: Paper 41 Jun 2017 Q2(c)
E 9.6: Specimen Paper 2 Q24 (reference also to E1.16 Personal and household finances)
C9.7: Paper 11 Jun 2017 Q22 (a) (b)
C9.8: Paper 11 Jun 2017 Q22 9(c)

52
Cambridge Assessment International Education
The Triangle Building, Shaftsbury Road, Cambridge, CB2 8EA, United Kingdom
t: +44 1223 553554 f: +44 1223 553558
e: [email protected] www.cambridgeinternational.org

Copyright © UCLES March 2018 (updated April 2021)