0% found this document useful (0 votes)
14 views

ITEPS Lecture 2.A

The document discusses ideal two-winding transformers, including their characteristics, equations relating voltage, current and flux based on Ampere's and Faraday's laws, and how impedance is referred between windings. An example problem is worked through applying the transformer equations to calculate values referred to different windings.

Uploaded by

Jin Young Song
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
14 views

ITEPS Lecture 2.A

The document discusses ideal two-winding transformers, including their characteristics, equations relating voltage, current and flux based on Ampere's and Faraday's laws, and how impedance is referred between windings. An example problem is worked through applying the transformer equations to calculate values referred to different windings.

Uploaded by

Jin Young Song
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Introduction to Electric

Power Systems
course 525.451

Lecture 2.A
TRANSFORMERS IN DISTRIBUTION AND
TRANSMISSION SYSTEMS
IDEAL TWO-WINDING TRANSFORMERS
TRANSFORMERS IN DISTRIBUTION AND TRANSMISSION
SYSTEMS
IDEAL TWO-WINDING TRANSFORMERS
A basic single-phase two-winding transformer.

2
TRANSFORMERS IN DISTRIBUTION AND TRANSMISSION
SYSTEMS
IDEAL TWO-WINDING TRANSFORMERS
An ideal transformer with two windings around a magnetic core is presumed to have the
following characteristics,
- The windings have zero resistance, so 𝐼 " 𝑅losses are also zero
- Core losses are zero
- The core has a permeability 𝜇% of infinity
- There is no leakage flux (the entire magnetic flux Φ% passes through both windings)

Ampere’s law states that the line integral of a magnetic


field around a closed loop equals the net current
enclosed by that loop.
Assuming a uniform magnetic field in the core of the
transformer, and applying Amperes law results in,
𝐻% 𝑙% = 𝑁+ 𝐼+ − 𝑁" 𝐼"

3
TRANSFORMERS IN DISTRIBUTION AND TRANSMISSION
SYSTEMS
𝐻% 𝑙% = 𝑁+𝐼+ − 𝑁"𝐼"
IDEAL TWO-WINDING TRANSFORMERS
Where 𝐻% is the magnetic field intensity in the core of the transformer, 𝑙% the average length of
the magnetic path in the core, 𝑁+ number of turns of the primary winding, 𝑁" number of
turns of the secondary winding, 𝐼+ current into the primary, and 𝐼" current out of the
secondary side.
Magnetic flux density 𝐵% inside the core is related to the magnetic field strength through the
magnetic core permeability with
𝐵% = 𝜇% 𝐻%
Assuming a uniform flux within the core and a core cross sectional area of 𝐴% , the magnetic
flux inside the core is,
Φ% = 𝐵% 𝐴%
Combining the above three equations, we will have,
𝑙%
𝑁+𝐼+ − 𝑁"𝐼" = Φ
𝜇% 𝐴% %
01
Calling the fraction core magnetic reluctance 𝑅% we have, (next page),
21 3 1

4
TRANSFORMERS IN DISTRIBUTION AND TRANSMISSION
SYSTEMS
𝑁+𝐼+ − 𝑁"𝐼" = 𝑅% Φ%
IDEAL TWO-WINDING TRANSFORMERS
For an ideal transformer 𝜇% is assumed to be infinitely large, causing 𝑅% to be = 0, and as a
result,
56
𝑁+𝐼+ − 𝑁"𝐼" = 0 or, 𝑁+𝐼+ = 𝑁"𝐼", or , 𝐼+ = 𝐼
57 "
Applying Faraday’s law to the time varying flux inside the core 𝜙(𝑡),
𝑑𝜙(𝑡)
𝑒 𝑡 =𝑁
𝑑𝑡
>?(@)
For steady state sinusoidal operations of the transformer = 𝑗𝜔Φ resulting in
>@
𝐸 = 𝑁𝑗𝜔Φ
As the same flux Φ passes through both primary and secondary windings,
𝐸+ = 𝑁+ 𝑗𝜔Φ
𝐸" = 𝑁" 𝑗𝜔Φ
Dividing the two equations we have (next page)

5
TRANSFORMERS IN DISTRIBUTION AND TRANSMISSION
SYSTEMS
D7 57 IDEAL TWO-WINDING TRANSFORMERS
= or,
D6 56
57
𝐸+ = 𝐸"
56
And from previous slide,
56
𝐼+ = 𝐼
57 "
57
Letting 𝑎@ to represent the turns ratio ,
56
We have
𝐸+ = 𝑎@ 𝐸"
F6
𝐼+ =
GH
Since 𝑎@ is a real number it is seen that for an ideal two-winding transformer 𝐸+and 𝐸" are in
phase with each other, and 𝐼+and 𝐼"are in phase with each other.

6
TRANSFORMERS IN DISTRIBUTION AND TRANSMISSION
SYSTEMS
IDEAL TWO-WINDING TRANSFORMERS
Calculating the complex power,

𝐼"
𝑆+ = 𝐸+ 𝐼+∗ = 𝑎@ 𝐸" = 𝐸" 𝐼"∗ = 𝑆"
𝑎@
It is seen that complex power into the primary is equal to the complex power out of the
secondary. And since S=P+jQ , this shows that the ideal transformer has neither real nor
reactive power loss.
Impedance Connected to Winding 2, Referred to Winding 1
D7 GH D6 D6
𝑍"L = = M6 = 𝑎@" = 𝑎@" 𝑍"
F7 F6
NH

7
TRANSFORMERS IN DISTRIBUTION AND TRANSMISSION
SYSTEMS
Example 1:
IDEAL TWO-WINDING TRANSFORMERS
We will do problem 3.2 of the textbook,
For an ideal transformer
𝑁+ = 2000, 𝑁" = 500
𝑍" is connected across the secondary
𝑉+ = 1000∠0° 𝑉
𝐼+ = 5∠ − 30° 𝐴
Find 𝑉" , 𝐼" , 𝑍" , and the impedance 𝑍"L which is the value of 𝑍" referred to the primary side.
Solution,
𝑁+
𝑎@ = =4
𝑁"
+WWW∠W° \6] "WW∠ZW°
𝑍"L = = 200∠30° Ω 𝑍" = 6 = = 12.5∠30° Ω
X∠YZW° GH +^
+WWW∠W
𝑉" = = 250∠0° 𝑉 𝐼" = 4×5∠ − 30° = 20∠ − 30° 𝐴
`

8
TRANSFORMERS IN DISTRIBUTION AND TRANSMISSION
SYSTEMS
IDEAL TWO-WINDING TRANSFORMERS

END OF LECTURE 2.A

You might also like