Series: SPO, wheel Ø 75 - 160 mm

Heavy duty nylon wheels

300 - 850 kg RoHS

Tread & tyre hardness

70° shore D

Temperature resistance
-25° C - +80° C

Rolling resistance
excellent

Operating noise
reasonable

Floor surface preservation

reasonable

SPO-wheel series: Wheels Wheel Ø Wheel Load Bearing type Axle Hub
Made of high-quality, impact-resistant nylon, width capacity bore Ø length
very rugged, heavy wheel design, 70° shore D
(D) [mm] (T2) [mm] [kg] (d) [mm] (T1) [mm]
hardness, very low rolling and swivel resistance,
smooth running performance on even floors, high SPO 75/12G 75 32 300 Plain bore 12 35
abrasion resistance, colour natural white. SPO 75/15G 75 32 300 Plain bore 15 35
(Material description page 40) SPO 75/15-45G 75 32 300 Plain bore 15 45
Bearing types: SPO 75/15K 75 32 300 Ball bearing 15 35
• Plain bore, corrosion-resistant SPO 80/15G 80 37 350 Plain bore 15 45
• Ball bearing: Two pressed-in ball bearings, SPO 80/15K 80 37 350 Ball bearing 15 45
lubricated with long-life grease. SPO 82/20K 80 70 650 Ball bearing 20 70
Other features: SPO 100/15G 100 37 500 Plain bore 15 45
High chemical resistance to many aggressive
SPO 100/15K 100 37 500 Ball bearing 15 45
substances (table page 36-37).
SPO 125/15G 125 40 700 Plain bore 15 45
Operating temperature: -25° C to +80° C.
SPO 125/20G 125 40 700 Plain bore 20 45
At ambient temperatures above +35° C the load
capacity is reduced. SPO 125/15K 125 40 700 Ball bearing 15 45
Maintenance-free under standard conditions. SPO 125/20K 125 40 700 Ball bearing 20 45
Wheel series overview page 49 SPO 127/20G 125 50 750 Plain bore 20 60
SPO 127/20K 125 50 750 Ball bearing 20 60
SPO 150/20G 150 50 800 Plain bore 20 60
SPO 150/20K 150 50 800 Ball bearing 20 60
14 SPO 150/25K
SPO 160/20G
150
160
50
50
800
850
Ball bearing
Plain bore
25
20
60
60
SPO 160/20K 160 50 850 Ball bearing 20 60
SPO 160/25K 160 50 850 Ball bearing 25 60
For further wheel Ø refer to the next page

Plain bore Ball bearing

Options

With grease nipple With stainless steel

ball bearing *

Technical description page 61

Product code suffix -NI -XK

Available for upon request upon request

* Some dimensions will result in a reduced load capacity (ask for details)

300 we innovate mobility www.blickle.com

Series: SPO, wheel Ø 175 - 250 mm
Heavy duty nylon wheels

1000 - 2000 kg RoHS

Tread & tyre hardness

70° shore D

Temperature resistance
-25° C - +80° C

Rolling resistance
excellent

Operating noise
reasonable

Floor surface preservation

reasonable

SPO-wheel series: Wheels Wheel Ø Wheel Load Bearing type Axle Hub
Made of high-quality, impact-resistant nylon, width capacity bore Ø length
very rugged, heavy wheel design, 70° shore D
(D) [mm] (T2) [mm] [kg] (d) [mm] (T1) [mm]
hardness, very low rolling and swivel resistance,
smooth running performance on even floors, high SPO 175/20G 175 50 1000 Plain bore 20 60
abrasion resistance, colour natural white. SPO 175/20K 175 50 1000 Ball bearing 20 60
(Material description page 40) SPO 175/25K 175 50 1000 Ball bearing 25 60
Bearing types: SPO 201/20G 200 50 1000 Plain bore 20 60
• Plain bore, corrosion-resistant SPO 201/20K 200 50 1000 Ball bearing 20 60
• Ball bearing: Two pressed-in ball bearings, SPO 200/20G * 200 50 1500 Plain bore 20 60
lubricated with long-life grease. SPO 200/25G * 200 50 1500 Plain bore 25 60
Other features:
SPO 200/20K * 200 50 1250 Ball bearing 20 60
High chemical resistance to many aggressive
SPO 200/25K * 200 50 1500 Ball bearing 25 60
substances (table page 36-37).
SPO 200/30K * 200 50 1500 Ball bearing 30 60
Operating temperature: -25° C to +80° C.
At ambient temperatures above +35° C the load SPO 251/25G 250 50 1500 Plain bore 25 60
capacity is reduced. SPO 251/25K 250 50 1500 Ball bearing 25 60
Maintenance-free under standard conditions. SPO 250/25G * 250 65 2000 Plain bore 25 70
Wheel series overview page 49 SPO 250/25K * 250 65 2000 Ball bearing 25 65
SPO 250/30K * 250 65 2000 Ball bearing 30 65
SPO 250/35K * 250 65 2000 Ball bearing 35 65
* Extra heavy wheel design
14

Plain bore Ball bearing

Options

With grease nipple With stainless steel

ball bearing **

Technical description page 61

Product code suffix -NI -XK

Available for upon request upon request

** Some dimensions will result in a reduced load capacity (ask for details)

www.blickle.com we innovate mobility 301

 Series: LK-SPO, BK-SPO, wheel Ø 75 - 125x40 mm
Pressed steel castors, medium heavy duty
brackets, with top plate fitting,
with heavy duty nylon wheel
300 - 350 kg RoHS

Brackets: LK/BK series - Made of heavy pressed steel, Wheels: SPO series - Made of high-quality, impact-resistant
swivel bracket with double ball bearing in the swivel head, nylon, very rugged, heavy wheel design, 70° shore D,
swivel head seals. The special Blickle dynamic riveting pro- natural white.
cess of the swivel head results in minimal swivel head play Bearing types: Plain bore or two pressed-in ball bearings.
and smooth rolling characteristics with an increased service Detailed description: Page 300 and 49
life achieved by the work hardening of the ball race grooves.
Bolted wheel axle.
Zinc-plated, blue-passivated, Cr6-free.
Bracket overview: Page 66
Top plate drawings: Page 77
Wheel and swivel head ‘stop-fix’ brake: Page 80

Swivel castors Fixed castors Swivel castors Wheel Ø Wheel Load Bearing type Total Plate Bolt hole Bolt Offset
with ‘stop-fix’ width capacity height size spacing hole Ø swivel castor
brake [mm] [mm] [kg] [mm] [mm] [mm] [mm] [mm]
LK-SPO 75G BK-SPO 75G LK-SPO 75G-FI 75 32 300 Plain bore 108 100 x 85 80 x 60 9 40
LK-SPO 75K BK-SPO 75K LK-SPO 75K-FI 75 32 300 Ball bearing 108 100 x 85 80 x 60 9 40
LK-SPO 80G BK-SPO 80G LK-SPO 80G-FI 80 37 350 Plain bore 110 100 x 85 80 x 60 9 40
LK-SPO 80K BK-SPO 80K LK-SPO 80K-FI 80 37 350 Ball bearing 110 100 x 85 80 x 60 9 40
LK-SPO 100G-1 BK-SPO 100G-1 LK-SPO 100G-1-FI 100 37 350 Plain bore 130 100 x 85 80 x 60 9 45
LK-SPO 100K-1 BK-SPO 100K-1 LK-SPO 100K-1-FI 100 37 350 Ball bearing 130 100 x 85 80 x 60 9 45
LK-SPO 100G-3 BK-SPO 100G-3 LK-SPO 100G-3-FI 100 37 350 Plain bore 130 140 x 110 105 x 75-80 11 45
LK-SPO 100K-3 BK-SPO 100K-3 LK-SPO 100K-3-FI 100 37 350 Ball bearing 130 140 x 110 105 x 75-80 11 45
LK-SPO 125G-1 BK-SPO 125G-1 LK-SPO 125G-1-FI 125 40 350 Plain bore 155 100 x 85 80 x 60 9 48
14 LK-SPO 125K-1 BK-SPO 125K-1 LK-SPO 125K-1-FI 125 40 350 Ball bearing 155 100 x 85 80 x 60 9 48
LK-SPO 125G-3 BK-SPO 125G-3 LK-SPO 125G-3-FI 125 40 350 Plain bore 155 140 x 110 105 x 75-80 11 48
LK-SPO 125K-3 BK-SPO 125K-3 LK-SPO 125K-3-FI 125 40 350 Ball bearing 155 140 x 110 105 x 75-80 11 48
For further wheel Ø refer to the next page
For stainless steel versions refer to page 375

Options

With pressed steel With ‘stop-top’ With central braking With ‘ideal-stop’ Directional lock With stainless steel With stainless steel
thread guard, brake system ‘central-stop’ brake (retro-fit) axle tube ball bearing
zinc-plated ttl. height +17mm * 1 x 360° in the wheel hub in the wheel hub
Technical description page 84 80 81 80 83 85 61

Product code suffix -FA -ST -CS11 -IS refer to ** -XA -XK
Available for all sizes all sizes wheel Ø 100-125 mm Ø 100-125 mm for wheel Ø and plate plain bore versions upon request
with plate 140x110 dimensions refer to ** upon request
* Matching synthetic adapter plate for total height compensation for swivel and fixed castors without ‘ideal-stop’ brake: Product code AP3
** RI-05.01 available for wheel-Ø 75 - 125 mm with plate 100x85 mm, RI-03.03 available for wheel Ø 100 - 125 mm with plate 140x110 mm (only for swivel castors without brake)

302 we innovate mobility www.blickle.com

Series: LK-SPO, BH-SPO, wheel Ø 125x50 - 200 mm
Pressed steel castors, medium heavy duty
brackets, with top plate fitting,
with heavy duty nylon wheel
600 kg RoHS

Brackets: LK/BH series - Made of heavy pressed steel, Wheels: SPO series - Made of high-quality, impact-resistant
swivel bracket with double ball bearing in the swivel head, nylon, very rugged, heavy wheel design, 70° shore D,
strong central kingpin, swivel head seals. The special natural white.
Blickle dynamic riveting process of the swivel head results Bearing types: Plain bore or two pressed-in ball bearings.
in minimal swivel head play and smooth rolling Detailed description: Page 300, 301 and 49
characteristics with an increased service life achieved by
the work hardening of the ball race grooves.
Bolted wheel axle.
Zinc-plated, blue-passivated, Cr6-free.
Bracket overview: Page 66
Top plate drawings: Page 77
Wheel and swivel head ‘stop-fix’ brake: Page 80

Swivel castors Fixed castors Swivel castors Wheel Ø Wheel Load Bearing type Total Plate Bolt hole Bolt Offset
with ‘stop-fix’ width capacity height size spacing hole Ø swivel castor
brake [mm] [mm] [kg] [mm] [mm] [mm] [mm] [mm]
LK-SPO 127G BH-SPO 127G LK-SPO 127G-FI 125 50 600 Plain bore 170 140 x 110 105 x 75-80 11 55
LK-SPO 127K BH-SPO 127K LK-SPO 127K-FI 125 50 600 Ball bearing 170 140 x 110 105 x 75-80 11 55
LK-SPO 150G BH-SPO 150G LK-SPO 150G-FI 150 50 600 Plain bore 197 140 x 110 105 x 75-80 11 63
LK-SPO 150K BH-SPO 150K LK-SPO 150K-FI 150 50 600 Ball bearing 197 140 x 110 105 x 75-80 11 63
LK-SPO 160G BH-SPO 160G LK-SPO 160G-FI 160 50 600 Plain bore 202 140 x 110 105 x 75-80 11 63
LK-SPO 160K BH-SPO 160K LK-SPO 160K-FI 160 50 600 Ball bearing 202 140 x 110 105 x 75-80 11 63
LK-SPO 175G BH-SPO 175G LK-SPO 175G-FI 175 50 600 Plain bore 220 140 x 110 105 x 75-80 11 65
LK-SPO 175K BH-SPO 175K LK-SPO 175K-FI 175 50 600 Ball bearing 220 140 x 110 105 x 75-80 11 65
LK-SPO 201G BH-SPO 201G LK-SPO 201G-FI 200 50 600 Plain bore 245 140 x 110 105 x 75-80 11 65
LK-SPO 201K BH-SPO 201K LK-SPO 201K-FI 200 50 600 Ball bearing 245 140 x 110 105 x 75-80 11 65 14
LK-SPO 200G * BH-SPO 200G * LK-SPO 200G-FI * 200 50 600 Plain bore 245 140 x 110 105 x 75-80 11 65
LK-SPO 200K * BH-SPO 200K * LK-SPO 200K-FI * 200 50 600 Ball bearing 245 140 x 110 105 x 75-80 11 65
* Extra heavy wheel design
For stainless steel versions refer to page 375

Options

With pressed steel With ‘stop-top’ With ‘ideal-stop’ Directional lock With steel With stainless steel With stainless steel
thread guard, brake brake (retro fit) foot guard axle tube ball bearing
zinc-plated ttl. height +17mm ** 1 x 360° *** in the wheel hub in the wheel hub
Technical description page 84 80 80 83 84 85 61

Product code suffix -FA -ST -IS RI-05.03 -FS -XA -XK
Available for all sizes all sizes wheel Ø 125, 160, all sizes upon request plain bore versions upon request
200 mm upon request
** Matching synthetic adapter plate for total height compensation for swivel and fixed castors without ‘ideal-stop’ brake: Product code AP3
*** Only for swivel castors without brake

www.blickle.com we innovate mobility 303

 Series: LH-SPO, BH-SPO, wheel Ø 75 - 125 mm
Pressed steel castors, heavy duty brackets,
with top plate fitting,
with heavy duty nylon wheel
300 - 750 kg RoHS

Brackets: LH/BH series - Made of heavy pressed steel, Wheels: SPO series - Made of high-quality, impact-resistant
swivel bracket with heavy fork and top plate, very strong nylon, very rugged, heavy wheel design, 70° shore D,
bolted and secured central kingpin, double ball bearing in natural white.
the swivel head, additionally reinforced by the integration Bearing types: Plain bore or two pressed-in ball bearings.
of four specially shaped and hardened bearing seats Detailed description: Page 300 and 49
resulting in a very high resistance to shock and impact
loads.
Bolted wheel axle.
Zinc-plated, blue-passivated, Cr6-free.
Bracket overview: Page 66
Top plate drawings: Page 77
Wheel and swivel head ‘stop-fix’ brake: Page 80

Swivel castors Fixed castors Swivel castors Wheel Ø Wheel Load Bearing type Total Plate Bolt hole Bolt Offset
with ‘stop-fix’ width capacity height size spacing hole Ø swivel castor
brake [mm] [mm] [kg] [mm] [mm] [mm] [mm] [mm]
LH-SPO 75G BH-SPO 75G LH-SPO 75G-FI 75 32 300 Plain bore 118 100 x 85 80 x 60 9 45
LH-SPO 75K BH-SPO 75K LH-SPO 75K-FI 75 32 300 Ball bearing 118 100 x 85 80 x 60 9 45
LH-SPO 80G BH-SPO 80G LH-SPO 80G-FI 80 37 350 Plain bore 120 100 x 85 80 x 60 9 45
LH-SPO 80K BH-SPO 80K LH-SPO 80K-FI 80 37 350 Ball bearing 120 100 x 85 80 x 60 9 45
LH-SPO 82K 80 70 650 Ball bearing 112 100 x 85 80 x 60 9 45
LH-SPO 100G-1 BH-SPO 100G-1 LH-SPO 100G-1-FI 100 37 500 Plain bore 140 100 x 85 80 x 60 9 45
LH-SPO 100K-1 BH-SPO 100K-1 LH-SPO 100K-1-FI 100 37 500 Ball bearing 140 100 x 85 80 x 60 9 45
LH-SPO 100G-3 BH-SPO 100G-3 LH-SPO 100G-3-FI 100 37 500 Plain bore 140 140 x 110 105 x 75-80 11 45
LH-SPO 100K-3 BH-SPO 100K-3 LH-SPO 100K-3-FI 100 37 500 Ball bearing 140 140 x 110 105 x 75-80 11 45
14 LH-SPO 125G-1 BH-SPO 125G-1 LH-SPO 125G-1-FI 125 40 700 Plain bore 165 100 x 85 80 x 60 9 45
LH-SPO 125K-1 BH-SPO 125K-1 LH-SPO 125K-1-FI 125 40 700 Ball bearing 165 100 x 85 80 x 60 9 45
LH-SPO 125G-3 BH-SPO 125G-3 LH-SPO 125G-3-FI 125 40 700 Plain bore 165 140 x 110 105 x 75-80 11 45
LH-SPO 125K-3 BH-SPO 125K-3 LH-SPO 125K-3-FI 125 40 700 Ball bearing 165 140 x 110 105 x 75-80 11 45
LH-SPO 127G BH-SPO 127G LH-SPO 127G-FI 125 50 750 Plain bore 170 140 x 110 105 x 75-80 11 55
LH-SPO 127K BH-SPO 127K LH-SPO 127K-FI 125 50 750 Ball bearing 170 140 x 110 105 x 75-80 11 55
For further wheel Ø refer to the next page

Options

With pressed steel With ‘stop-top’ With central braking With ‘ideal-stop’ Directional lock With steel With stainless steel
thread guard, brake system ‘central-stop’ brake (retro-fit) foot guard axle tube (-XA) /
zinc-plated ttl. height +17mm * 1 x 360° ball bearing (-XK) ***
Technical description page 84 80 81 80 83 84 85 / 61

Product code suffix -FA -ST -CS13 -IS refer to ** -FS -XA / -XK
Available for all sizes except all sizes except wheel Ø 125x50 mm wheel Ø 125x50 mm for wheel Ø and plate upon request upon request
Ø 80x70 mm Ø 80x70 mm dimensions refer to **
* Matching synthetic adapter plate for total height compensation for swivel and fixed castors without ‘ideal-stop’ brake: Product code AP3
** RI-04.01 for Ø 75, 80x37, 100, 125 mm with plate 100x85 mm, RI-04.03 for Ø 100, 125x40 mm with plate 140x110 mm, RI-05.03 for Ø 125x50 mm (only for swivel castors without brake)
*** Some dimensions will result in a reduced load capacity (ask for details)

306 we innovate mobility www.blickle.com

Series: LH-SPO, BH-SPO, wheel Ø 150 - 250 mm
Pressed steel castors, heavy duty brackets,
with top plate fitting,
with heavy duty nylon wheel
800 - 900 kg RoHS

Brackets: LH/BH series - Made of heavy pressed steel, Wheels: SPO series - Made of high-quality, impact-resistant
swivel bracket with heavy fork and top plate, very strong nylon, very rugged, heavy wheel design, 70° shore D,
bolted and secured central kingpin, double ball bearing in natural white.
the swivel head, additionally reinforced by the integration Bearing types: Plain bore or two pressed-in ball bearings.
of four specially shaped and hardened bearing seats Detailed description: Page 300, 301 and 49
resulting in a very high resistance to shock and impact
loads.
Bolted wheel axle.
Zinc-plated, blue-passivated, Cr6-free.
Bracket overview: Page 66
Top plate drawings: Page 77
Wheel and swivel head ‘stop-fix’ brake: Page 80

Swivel castors Fixed castors Swivel castors Wheel Ø Wheel Load Bearing type Total Plate Bolt hole Bolt Offset
with ‘stop-fix’ width capacity height size spacing hole Ø swivel castor
brake [mm] [mm] [kg] [mm] [mm] [mm] [mm] [mm]
LH-SPO 150G BH-SPO 150G LH-SPO 150G-FI 150 50 800 Plain bore 197 140 x 110 105 x 75-80 11 65
LH-SPO 150K BH-SPO 150K LH-SPO 150K-FI 150 50 800 Ball bearing 197 140 x 110 105 x 75-80 11 65
LH-SPO 160G BH-SPO 160G LH-SPO 160G-FI 160 50 850 Plain bore 202 140 x 110 105 x 75-80 11 65
LH-SPO 160K BH-SPO 160K LH-SPO 160K-FI 160 50 850 Ball bearing 202 140 x 110 105 x 75-80 11 65
LH-SPO 175G BH-SPO 175G LH-SPO 175G-FI 175 50 900 Plain bore 220 140 x 110 105 x 75-80 11 67
LH-SPO 175K BH-SPO 175K LH-SPO 175K-FI 175 50 900 Ball bearing 220 140 x 110 105 x 75-80 11 67
LH-SPO 201G BH-SPO 201G LH-SPO 201G-FI 200 50 900 Plain bore 245 140 x 110 105 x 75-80 11 70
LH-SPO 201K BH-SPO 201K LH-SPO 201K-FI 200 50 900 Ball bearing 245 140 x 110 105 x 75-80 11 70
LH-SPO 200G * BH-SPO 200G * LH-SPO 200G-FI * 200 50 900 Plain bore 245 140 x 110 105 x 75-80 11 70
LH-SPO 200K * BH-SPO 200K * LH-SPO 200K-FI * 200 50 900 Ball bearing 245 140 x 110 105 x 75-80 11 70 14
LH-SPO 251G BH-SPO 251G ** 250 50 900 Plain bore 295 140 x 110 105 x 75-80 11 82
LH-SPO 251K BH-SPO 251K ** 250 50 900 Ball bearing 295 140 x 110 105 x 75-80 11 82
LH-SPO 250G * BH-SPO 250G * ** 250 65 900 Plain bore 295 140 x 110 105 x 75-80 11 82
LH-SPO 250K * BH-SPO 250K * ** 250 65 900 Ball bearing 295 140 x 110 105 x 75-80 11 82
* Extra heavy wheel design
** For the ‘stop-top’ brake version refer to ‘Options’

Options

With pressed steel With ‘stop-top’ With central braking With ‘ideal-stop’ Directional lock With steel With stainless steel
thread guard, brake system ‘central-stop’ brake (retro fit) foot guard axle tube (-XA) /
zinc-plated ttl. height +17mm *** 1 x 360° **** ball bearing(-XK) *****
Technical description page 84 80 81 80 83 84 85 / 61

Product code suffix -FA -ST -CS13 -IS RI-05.03 -FS -XA / -XK
Available for wheel Ø 150-200 mm all sizes wheel Ø 160, 200, wheel Ø 160, 200, wheel Ø 150-200 mm wheel Ø 150,160, upon request
250 mm 250 mm 200 upon request
*** Matching synthetic adapter plate for total height compensation for swivel and fixed castors without ‘ideal-stop’ brake: Product code AP3
**** Only for swivel castors without brake
***** Some dimensions will result in a reduced load capacity (ask for details)

www.blickle.com we innovate mobility 307

Series: LS-SPO, BS-SPO
Welded steel heavy duty castors,
strong swivel head design,
with heavy duty nylon wheel
750 - 2000 kg RoHS

Brackets: LS/BS series - Particularly rugged welded steel Wheels: SPO series - Made of high-quality, impact-resistant
construction, swivel bracket with axial grooved ball bearing nylon, very rugged, heavy wheel design, 70° shore D,
DIN 711 and tapered roller bearing DIN 720 in the swivel natural white.
head, dust and splash-proof, fitted grease nipple, bolted and Bearing types: Plain bore or two pressed-in ball bearings.
secured with a welded very strong central kingpin. Detailed description: Page 300, 301 and 49
Bolted wheel axle.
Zinc-plated, yellow-passivated, Cr6-free.
Bracket overview: Page 68
Top plate drawings: Page 77 and 78
Wheel and swivel head ‘stop-top’ brake: Page 80

Swivel castors Fixed castors Swivel castors Wheel Ø Wheel Load Bearing type Total Plate Bolt hole Bolt Offset
with ‘stop-top’ width capacity height size spacing hole Ø swivel castor
brake [mm] [mm] [kg] [mm] [mm] [mm] [mm] [mm]
LS-SPO 127G BS-SPO 127G LS-SPO 127G-ST 125 50 750 Plain bore 170 140 x 110 105 x 75-80 11 50
LS-SPO 127K BS-SPO 127K LS-SPO 127K-ST 125 50 750 Ball bearing 170 140 x 110 105 x 75-80 11 50
LS-SPO 150G BS-SPO 150G LS-SPO 150G-ST 150 50 800 Plain bore 200 140 x 110 105 x 75-80 11 55
LS-SPO 150K BS-SPO 150K LS-SPO 150K-ST 150 50 800 Ball bearing 200 140 x 110 105 x 75-80 11 55
LS-SPO 160G BS-SPO 160G LS-SPO 160G-ST 160 50 850 Plain bore 205 140 x 110 105 x 75-80 11 55
LS-SPO 160K BS-SPO 160K LS-SPO 160K-ST 160 50 850 Ball bearing 205 140 x 110 105 x 75-80 11 55
LS-SPO 200G BS-SPO 200G LS-SPO 200G-ST 200 50 1500 Plain bore 245 140 x 110 105 x 75-80 11 60
LS-SPO 200K BS-SPO 200K LS-SPO 200K-ST 200 50 1500 Ball bearing 245 140 x 110 105 x 75-80 11 60
LS-SPO 251G BS-SPO 251G LS-SPO 251G-ST 250 50 1500 Plain bore 305 175 x 140 140 x 105 14 75
LS-SPO 251K BS-SPO 251K LS-SPO 251K-ST 250 50 1500 Ball bearing 305 175 x 140 140 x 105 14 75 14
LS-SPO 250G * BS-SPO 250G * LS-SPO 250G-ST * 250 65 2000 Plain bore 305 175 x 140 140 x 105 14 75
LS-SPO 250K * BS-SPO 250K * LS-SPO 250K-ST * 250 65 2000 Ball bearing 305 175 x 140 140 x 105 14 75
* Extra heavy wheel design

Options

With pressed steel With directional With directional With steel With sprung With stainless steel Truck lock
thread guard, lock 2 x 180° lock 4 x 90° foot guard foot guard axle tube (-XA) /
zinc-plated ball bearing (-XK) **
Technical description page 84 83 83 84 84 85 / 61 82, 483

Product code suffix -FA -RI2 -RI4 -FS -FG -XA / -XK FF 125/150/160/200
Available for wheel Ø 125-200 mm all sizes all sizes upon request upon request upon request wheel Ø 125-200 mm

** Some dimensions will result in a reduced load capacity (ask for details)

www.blickle.com we innovate mobility 311

Series: LSD-SPO, BSD-SPO
Welded steel heavy duty twin wheel castors,
strong swivel head design,
with heavy duty nylon wheels
1350 - 3600 kg RoHS

Brackets: LSD/BSD series - Particularly rugged welded Wheels: SPO series - Made of high-quality, impact-resistant
steel construction, swivel bracket with axial grooved ball nylon, very rugged, heavy wheel design, 70° shore D,
bearing DIN 711 and tapered roller bearing DIN 720 in the natural white.
swivel head, dust and splash-proof, fitted grease nipple, Bearing type: Two pressed-in ball bearings.
bolted and secured with a welded very strong central Detailed description: Page 300, 301 and 49
kingpin.
Bolted wheel axle.
Zinc-plated, yellow-passivated, Cr6-free.
Bracket overview: Page 68
Top plate drawings: Page 78

Swivel castors Fixed castors Wheel Ø Wheel Load Bearing type Total Plate Bolt hole Bolt Offset
width capacity height size spacing hole Ø swivel castor
[mm] [mm] [kg] [mm] [mm] [mm] [mm] [mm]
LSD-SPO 127K BSD-SPO 127K 125 2 x 50 1350 Ball bearing 185 140 x 175 * 105 x 140 14 50
LSD-SPO 150K-35 BSD-SPO 150K-35 150 2 x 50 1450 Ball bearing 215 140 x 175 * 105 x 140 14 55
LSD-SPO 160K-35 BSD-SPO 160K-35 160 2 x 50 1550 Ball bearing 220 140 x 175 * 105 x 140 14 55
LSD-SPO 200K-35 BSD-SPO 200K-35 200 2 x 50 2700 Ball bearing 260 140 x 175 * 105 x 140 14 60
LSD-SPO 250K BSD-SPO 250K 250 2 x 65 3600 Ball bearing 330 200 x 255 * 160 x 210 18 70
* Fixed castors: Long plate side is parallel to the axle

14

Options

With ‘Radstop’ With ‘Radstop’ wheel With directional With directional With directional With steel
wheel brake up to brake, wheel lock 2 x 180° lock 4 x 90° lock 4 x 90° foot guard
wheel Ø 200 mm Ø 250 mm (hand-operated)
Technical description page 81 81 83 83 83 84

Product code suffix -RA -RAH -RI2 -RI4 -RI4H -FS

Available for upon request upon request wheel Ø 125-200x50 wheel Ø 125-200x50 wheel Ø 250 mm upon request
upon request upon request upon request

www.blickle.com we innovate mobility 313