Scribd
Upload
45 views2 pages

Sahara C 070ba

SAHARA C 070BA is an impact copolymer used for injection molding with medium flow viscosity and stiffness-impact balance. It provides good heat aging resistance and low warpage, making it suitable for applications requiring high temperature resistance like battery cases and automotive parts. The product has a density of 0.90 g/cm3 and melt flow rate of 7 g/10 min. Processing requires a barrel temperature of 210-250°C and mold temperature of 15-40°C.

Uploaded by

Naren Rawat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views2 pages

Sahara C 070ba

SAHARA C 070BA is an impact copolymer used for injection molding with medium flow viscosity and stiffness-impact balance. It provides good heat aging resistance and low warpage, making it suitable for applications requiring high temperature resistance like battery cases and automotive parts. The product has a density of 0.90 g/cm3 and melt flow rate of 7 g/10 min. Processing requires a barrel temperature of 210-250°C and mold temperature of 15-40°C.

Uploaded by

Naren Rawat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Polypropylene, Impact Copolymer

TECHNICAL DATA SHEET


Description
SAHARA C 070BA is impact copolymer with medium flow viscosity used in injection molding. This grade is characterized by a

medium stiffness-impact balance at low temperature as well as a low warpage tendency. The additive formulation provides
a good heat aging resistance. This product is typically used in applications that requires high resistance to temperature.
This characterized with good heat aging resistance, good impact with low warpage.

Product Characteristics
Commercial: Active.
Processing Method: Injection Molding.
Typical applications: Battery Cases; Automotive.

Typical Properties Test Method Nominal Value Unit


Physical
Density ISO1183-1 0.90 g/cm³
Melt Flow Rate 230 °C/2.16 kg. ISO1133 7 g/10 min
Mechanical
Flexural Modulus ISO 178 1375 MPa
Tensile Modulus ISO 527-1, -2 1240 MPa
Tensile Stress at Yield ISO 527-1, -2 26 MPa
Tensile Strain at Yield ISO 527-1, -2 7 %
Tensile Strain at Break ISO 527-1, -2 >50 %
Charpy Impact Notched, Type 1, Edgewise, Notch A, 23 °C ISO 179 9.2 kJ/m²
Charpy Impact Notched, Type 1, Edgewise, Notch A, 0 °C ISO 179 4.7 kJ/m²
Charpy Impact Notched, Type 1, Edgewise, Notch A, -20 °C ISO 179 4.2 kJ/m²
Notched Izod Impact Strength, 23 °C ISO 180 7.6 kJ/m²
Thermal
Heat Deflection Temperature-A, 1.8 MPa, unannealed ISO 75B-1, -2 57 °C
Heat Deflection Temperature -B, 0.45 MPa, unannealed ISO 75B-1, -2 90 °C
Vicat Softening Temperature, A50 ISO 306 149 °C
Vicat Softening Temperature, B50 ISO 306 68 °C

Revision Sep 2022


Polypropylene, Impact Copolymer

Processing Condition
Barrel temperature range: 210 -250 °C
Mold temperature: 15 -40 °C
Melt temperature: 240 -260 °C
Mold Shrinkage: 1 – 2.5 %

Safety and Handling


The product is not classified as a hazardous material. Polypropylene resin should be stored in a manner to prevent a direct
exposure to sunlight and/or heat. The storage area should also be dry and preferably do not exceed 50°C. Sipchem would
not give warranty to bad storage conditions which may lead to quality deterioration such as color change, bad smell and
inadequate product performance. It is advisable to process PP resin within 6 months after delivery. Conveying equipment
should be designed to prevent production and accumulation of fines and dust particles that are contained in polymer
resins. These particles can under certain conditions pose an explosion hazard. Conveying systems should be grounded,
equipped with adequate filters and regularly inspected for leaks. For additional information about safety, handling and
storage. Safety Data Sheets (SDS) are available on our website.

Food Contact Regulation


This product complies with the relevant requirements of EU, China, South America & United States Food contact.
Declaration of Compliance Certificate are available on our Internet site. For additional specific information please contact
Product Stewardship team

Disclaimer
Information in this document is accurate to the best of our knowledge at the date of publication. The document is designed
to provide users general information for safe handling, use, processing, storage, transportation, disposal and release and
does not constitute any warranty or quality specification, either express or implied, including any warranty of
merchantability or fitness for any particular purpose. Users shall determine whether the product is suitable for their use
and can be used safely and legally.
Contacts
E [email protected]
Sales and Marketing Company
Compliance & Product Stewardship E [email protected]

Sipchem Company W www.sipchem.com

Revision Sep 2022

You might also like