Scribd
Upload
18 views

Sequencer Sub-Base

This document provides information on various sequencer sub-bases from Crouzet, including their characteristics, connections, and dimensions. The sub-bases allow for rotatable connectors and pressure indicators. They have operating temperatures between -5 and 50 degrees Celsius and weights ranging from 55 to 135 grams. Connections include input, output, start, and indicator ports. Dimensions include mounting points and connections for tubes or rails.

Uploaded by

Ahmad Hamouda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
18 views

Sequencer Sub-Base

This document provides information on various sequencer sub-bases from Crouzet, including their characteristics, connections, and dimensions. The sub-bases allow for rotatable connectors and pressure indicators. They have operating temperatures between -5 and 50 degrees Celsius and weights ranging from 55 to 135 grams. Connections include input, output, start, and indicator ports. Dimensions include mounting points and connections for tubes or rails.

Uploaded by

Ahmad Hamouda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Sequencer sub-bases

Also available in ATEX version for use in


potentially explosive atmospheres in accordance
with 94/9/EC Directive

81 551 101 81 552 101 81 552 601


Front connecting (DIN-omega) Sub-base (DIN oméga) End bases - one pair Diversion base
Versions
Rear connecting (with clips) - - -

Characteristics
Sub-bases Rotatable connectors ● ● ●
(fitted) Pressure indicators ● ● ●
Operating temperature °C -5 +50 -5 +50 -5 +50
Weight g 55 135 60

Sequencer connections
Front connecting 1 - Input port (green port 1) Ø 4
2 - Output port (red port 1) Ø 4
3 - Input port, cycle start (green port 1) Ø 4
4 - Output port, in-cycle signal (red port 1) Ø 4
5 - Output port, cycle end (red port 6) Ø 4
6 - Output port, cycle end (red port 6) Ø 4
7 - Input port, reset to zero (green port 7) Ø 4
8 - Output indicator (red)
9 - Input indicator (green)
10 - Cycle start indicator at port 4 (green)
11 - In-cycle indicator at port 5 (red)
12 - Input indicator at port 7 (green)
13 - End of cycle indicator at port 6 (red)
14 - Supply indicator at port 2 (yellow)
15 - Interconnecting ports
16 - Fixing screws
17 - Engraved arrow to indicate direction of sequence

4 18 - Marking tag
19 - Marking tag position
20 - Marking tag position
21 - Mounting tongue
22 - Mounting groove
23 - Sub-base
24 - End bases
Dimensions
Front connecting

Mounted on :rail EN 50022

Sub-base
End bases - one pair
Push-in connection for semi-rigid tube
Ø 4 mm (NFE 49100)

www.crouzet.com
44

You might also like