Machinery Lubrication

Technician
(MLT)
General Information

Level I Machinery Lubrication Technician

The purpose for the Level I Machine Lubrication Technician (MLT) certification is to verify that technicians
practicing in the field of machinery lubrication, as it is applied to machinery
condition monitoring and maintenance, are qualified to perform the following tasks:

• Manage lubricant delivery, storage and dispensation

• Manage a route for machinery re-lubrication and/or inspection
• Properly change and/or top the oil in mechanical equipment found in common industrial sites
• Use simple techniques to select lubricants with the proper base oil and additive system for
machinery commonly found in industrial settings
• Use simple techniques to select grease lubricants appropriate for machines commonly found in
industrial settings
• Use simple techniques to select grease application methods (including automated delivery) that are
least intrusive and most effective for machines commonly found in industrial settings
• Use simple techniques to estimate re-grease volume and interval for machines commonly operated
in industrial settings
• Properly maintain automatic lubrication systems (auto-grease, mist systems, etc.)
• Employ basic oil analysis techniques to identify and troubleshoot abnormal lubricant degradation
conditions, and use simple techniques to adjust the lubricant specification accordingly

Common job titles for the individual who would become Level I MLT certified include Lubrication
Technician, PM Technician, Millwright, Mechanic, etc. Generally, this individual has regular contact with the
machine and has routine influence over the condition of lubricants and hydraulic fluids in use. The
individual is likely to be directly involved in the machine lubrication process.

Level I MLT Certification Requirements

To become certified, an individual must meet the following requirements:

• Education and/or Experience - Candidates must have at least two years education (post-
secondary) or on-the-job training in one or more of the following fields: machine lubrication,
engineering, mechanical maintenance and/or maintenance trades.

• Training - Candidate must have received 16 hours of documented formal training in machinery
lubrication as outlined in the Body of Knowledge of the MLT I. For online or recorded training,
exercises, practice exams, and review exercises may be included in the training time total but shall not
exceed three hours of the required course time. Candidate shall be able to provide a record of this
training to ICML that shall include the candidate’s name, the name and signature of the instructor, the
dates of the training, and the number of hours spent in the training.

ICML does not require, recommend, endorse or authorize any specific training course as official or
approved. It is the responsibility of each candidate to research the training options available in his/her
area and make a decision as to the training provider of his/her choice. ICML recommends the outline
of the course of choice be compared to the exam's Body of Knowledge. It is in the person's best
interest and their responsibility as an ICML candidate to ensure they are being trained in the same
subject areas in which they will be tested. ICML's Bodies of Knowledge are of public domain and can be
 utilized by companies in the development of courses, as well as by any prospective candidate for
evaluating the appropriateness of chosen training.

• Examination - Each candidate must successfully pass a written, 100 question multiple-choice
examination that evaluates the candidate's knowledge of the topic. Candidates have three hours to
complete the closed-book examination. A score of 70% is required to pass the examination and
achieve certification.

Level I MLT Body of Knowledge

The Level I MLT Body of Knowledge is an outline of concepts that one should have in order to pass the
exam.
References from which exam questions were derived can be found in the Domain of Knowledge below.

I. Maintenance Strategy (5%)

A. Why machines fail
B. The impact of poor maintenance on company profits
C. The role of effective lubrication in failure avoidance

II. Lubrication Theory (10%)

A. Fundamentals of tribology
B. Functions of a lubricant
C. Hydrodynamic lubrication (sliding friction)
D. Elasto-hydrodynamic lubrication (rolling friction)
E. Mixed-film lubrication

III. Lubricants (15%)

A. Base-oils
B. Additives and their functions
C. Oil lubricant physical, chemical and performance properties and classifications.
D. Grease lubrication
1. How grease is made
2. Thickener types
3. Thickener compatibility
4. Grease lubricant physical, chemical and performance properties and classifications.

IV. Lubricant Selection (15%)

A. Viscosity selection
B. Base-oil type selection
C. Additive system selection
D. Machine specific lubricant requirements
1. Hydraulic systems
2. Rolling element bearings
3. Journal bearings
4. Reciprocating engines
5. Gearing and gearboxes
E. Application and environment related adjustments.

V. Lubricant Application (25%)

A. Basic calculations for determining required lubricant volume.
B. Basic calculations to determine re-lube and change frequencies.
C. When to select oil; when to select grease.
D. Effective use of manual delivery techniques.
E. Automatic delivery systems.
1. Automated deliver options.
a. Automated grease systems
b. Oil mist systems
 c. Drip and wick lubricators
2. Deciding when to employ automated lubricators.
3. Maintenance of automated lubrication systems.

VI. Preventive and Predictive Maintenance (10%)

A. Lube routes and scheduling
B. Oil analysis and technologies to assure lubrication effectiveness.
C. Equipment tagging and identification.

VII. Lubricant Condition Control (10%)

A. Filtration and separation technologies.
B. Filter rating.
C. Filtration system design and filter selection.

VIII. Lubricant Storage and Management (10%)

A. Lubricant receiving procedures.
B. Proper storage and inventory management.
C. Lube storage containers
D. Proper storage of grease-guns and other lube application devices.
E. Maintenance of automatic grease systems.
F. Health and safety assurance.

Domain of Knowledge
• Ludema, K. (1996) Friction, Wear, Lubrication: A Textbook in Tribology. CRC Press, Boca Raton, FL,
USA.
• Landsdown, A. (1994) High Temperature Lubrication. Mechanical Engineering Publications, Ltd.,
London, England, UK.
• Hodges, P. (1996) Hydraulic Fluids. Arnold Publish, London, England, UK and John Wiley & Sons, New
York, NY, USA.
• NLGI, (1996) Lubricating Grease Guide The National Lubricating Grease Institute, Kansas City, MO.
• Landsdown, A. (1996) Lubrication and Lubricant Selection. Mechanical Engineering Publication, Ltd.,
London, England, UK.
• Bannister, K. (2007) Lubrication for Industry. Industrial Press, Inc., New York, NY, USA.
• Pirro, D.M. and Wessol, A.A. (2016) Lubrication Fundamentals, 2nd Edition, Revised and Expanded.
Marcel Dekker, Inc., New York, NY, USA.
• Troyer, D. and J. Fitch (2010) Oil Analysis Basics. Noria Publishing, Tulsa, OK, USA.
• Bloch, H. (2016) Practical Lubrication for Industrial Facilities. Marcel Dekker, Inc., New York, NY, USA.
• The Lubrication Engineer's Manual (2010) Association of Iron and Steel Engineers, Pittsburgh, PA, USA.
• Scott, R., Fitch J., Leugner, L. (2012) The Practical Handbook of Machinery Lubrication, Noria
Publishing, Tulsa, Oklahoma, USA.

These references can be purchased from the following organizations:

Amazon.Com
ASTM
Barnes and Noble
Noria Corporation

Level I MLT Recertification

ICML Certification is valid for three years from the date of issue. Individuals certified as Machinery
Lubrication Technicians (MLTs) must recertify their competency every three years. The purpose for
recertification is to ensure that certified individuals keep their skills current and up to date. Recertification
must be achieved by a points system. To recertify by points, individuals must accumulate 15
recertification points over the three-year period and submit a completed application to ICML. Points may
be claimed using the following criteria:

Category Points Maximum Documentation

Proof of attendance (certificate, badge or
letter from training company in its
Training 1 point per day 10 points
letterhead) and a copy of the course
outline
Letter from employer, in company
Employment 4 points per year 12 points
letterhead, with title of signer shown
Copy of article and table of contents of the
Article
2 points per article 6 points book, proceedings, magazine or journal in
Publication
which it was published
Proof of attendance (certificate, badge or
Conference
1 point per conference day 6 points letter from conference organizer in its
Attendance
letterhead) and copy of program

Criteria of Acceptability

• Employment - Employment must be in a field related to industrial lubrication and/or oil analysis.
• Training/ Conference Attendance - Training/Conference topics related to oil analysis, lubrication
or other topics important to effective equipment maintenance and management will be accepted.
• Article Publication - Articles published in journals, magazines, books or proceedings should be
related to a topic within the body of knowledge for oil analysis, lubrication or equipment maintenance
or management.

All points must be earned during the time the certification is in effect. Points earned before or after the
certification period will not be accepted. Points may be applied to multiple ICML certifications held by the
individual, assuming that the points are applicable and approved for each individual re-certification.

If a candidate’s only source of re-certification points is employment, the extra points required may be
earned via participation in employment-related best practices activities, as per below criteria:

• Lube related failure elimination and/or prevention activities

• Lube procedure and best practices development
• Lube program auditing tasks
• Lube specification development
• Lube related work management system development

Frequently Asked Questions

• How many questions are on the exams?
MLT I exam has 100 multiple choice questions
• How long do I have to complete the exams?
You have three hours to complete the exam
• What score is required to pass an exam?
70% correct answers

Copyright 2003 ▪ International Council for Machinery Lubrication

2404 W Detroit St ▪ Broken Arrow, OK 74012 USA
Phone: (918) 259-2950 ▪ Fax: (918) 259-0177 ▪ www.lubecouncil.org ▪ [email protected]