Scribd
Upload
39 views

Stress Analysis Report - ING Ve

The stress analysis report summarizes the static analysis of a part under applied forces and constraints. A force of 196133 lbs is applied downward on the part while 8 faces are fixed as constraints. The maximum Von Mises stress is 0.000720492 ksi and occurs at the applied force location. Displacements are below 0.000320193 inches. All stresses and strains are within the yield strength of the steel material.

Uploaded by

Dennis Esmith Eguchaga Ayca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
39 views

Stress Analysis Report - ING Ve

The stress analysis report summarizes the static analysis of a part under applied forces and constraints. A force of 196133 lbs is applied downward on the part while 8 faces are fixed as constraints. The maximum Von Mises stress is 0.000720492 ksi and occurs at the applied force location. Displacements are below 0.000320193 inches. All stresses and strains are within the yield strength of the steel material.

Uploaded by

Dennis Esmith Eguchaga Ayca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 25

24/4/23, 23:40 Stress Analysis Report

Stress Analysis Report

Analyzed File:
Autodesk Inventor Version: 2023 (Build 270158000, 158)
Creation Date: 24/04/2023, 22:28
Study Author: USER
Summary:

Static Analysis:1
General objective and settings:
Design Objective Single Point
Study Type Static Analysis
Last Modification Date 24/04/2023, 22:28
Model State [Primary]
Detect and Eliminate Rigid Body Modes No

iProperties
Summary
Author USER

Project
Designer USER
Cost S/ 0.00
Date Created 24/04/2023

Status
Design Status WorkInProgress

Physical
Material Steel ASTM A514
Density 0.283599 lbmass/in^3
Mass 2.79577E+09 lbmass
Area 56675800 in^2
Volume 9.85817E+09 in^3
x=172.083 in
Center of Gravity y=-40.699 in
z=0.202057 in
Note: Physical values could be different from Physical values used by FEA reported below.

Mesh settings:
Avg. Element Size (fraction of model diameter) 0.1
Min. Element Size (fraction of avg. size) 0.2
Grading Factor 1.5
Max. Turn Angle 60 deg
Create Curved Mesh Elements Yes

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 1/25


24/4/23, 23:40 Stress Analysis Report

Material(s)
Name Steel ASTM A514
Mass Density 0.283599 lbmass/in^3
General Yield Strength 53999.7 psi
Ultimate Tensile Strength 74299.6 psi
Young's Modulus 29699.8 ksi
Stress Poisson's Ratio 0.29 ul
Shear Modulus 11511.6 ksi
Part Name(s) Part15

Operating conditions
Force:1
Load Type Force
Magnitude 196133.000 lbforce
Vector X 0.000 lbforce
Vector Y -196133.000 lbforce
Vector Z 0.000 lbforce

Selected Face(s)

Fixed Constraint:1
file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 2/25
24/4/23, 23:40 Stress Analysis Report

Constraint Type Fixed Constraint

Selected Face(s)

Fixed Constraint:2
Constraint Type Fixed Constraint

Selected Face(s)

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 3/25


24/4/23, 23:40 Stress Analysis Report

Fixed Constraint:3
Constraint Type Fixed Constraint

Selected Face(s)

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 4/25


24/4/23, 23:40 Stress Analysis Report

Fixed Constraint:4
Constraint Type Fixed Constraint

Selected Face(s)

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 5/25


24/4/23, 23:40 Stress Analysis Report

Fixed Constraint:5
Constraint Type Fixed Constraint

Selected Face(s)

Fixed Constraint:6
Constraint Type Fixed Constraint

Selected Face(s)

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 6/25


24/4/23, 23:40 Stress Analysis Report

Fixed Constraint:7
Constraint Type Fixed Constraint

Selected Face(s)

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 7/25


24/4/23, 23:40 Stress Analysis Report

Fixed Constraint:8
Constraint Type Fixed Constraint

Selected Face(s)

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 8/25


24/4/23, 23:40 Stress Analysis Report

Results
Reaction Force and Moment on Constraints
Reaction Force Reaction Moment
Constraint Name
Magnitude Component (X,Y,Z) Magnitude Component (X,Y,Z)
45126 lbforce -277935 lbforce ft
Fixed Constraint:1 60643.3 lbforce 39376.5 lbforce 2614040 lbforce ft 299512 lbforce ft
-9526.15 lbforce 2581910 lbforce ft
45372.2 lbforce 242062 lbforce ft
Fixed Constraint:2 61008.9 lbforce 39661.9 lbforce 2608780 lbforce ft -268980 lbforce ft
9507.25 lbforce 2583560 lbforce ft
-55224.4 lbforce -415773 lbforce ft
Fixed Constraint:3 84707.9 lbforce 62387.6 lbforce 613771 lbforce ft -265779 lbforce ft
-15279.7 lbforce 364978 lbforce ft
-55782.5 lbforce 390310 lbforce ft
Fixed Constraint:4 85732.3 lbforce 63265 lbforce 584412 lbforce ft 243580 lbforce ft
15358.1 lbforce 360366 lbforce ft
6920.83 lbforce -9891.14 lbforce ft
Fixed Constraint:5 12284.5 lbforce -10147.1 lbforce 114176 lbforce ft -15128.7 lbforce ft
-217.994 lbforce -112736 lbforce ft
7138.64 lbforce 4577.43 lbforce ft
Fixed Constraint:6 12752.8 lbforce -10565.8 lbforce 114303 lbforce ft 9986.91 lbforce ft
193.575 lbforce -113774 lbforce ft
3197.16 lbforce -14092.6 lbforce ft
Fixed Constraint:7 6959.53 lbforce 6127.54 lbforce 97024.2 lbforce ft 5420.17 lbforce ft
-816.408 lbforce -95842.1 lbforce ft
3251.89 lbforce 14737.8 lbforce ft
Fixed Constraint:8 6900.32 lbforce 6035.66 lbforce 105793 lbforce ft -5181.32 lbforce ft
781.341 lbforce -104633 lbforce ft

Result Summary
Name Minimum Maximum
Volume 7.88654E+10 in^3
Mass 2.23662E+10 lbmass
Von Mises Stress 0.00000086828 ksi 0.000720492 ksi
1st Principal Stress -0.000137094 ksi 0.000541658 ksi
3rd Principal Stress -0.000867097 ksi 0.000114711 ksi
Displacement 0 in 0.000320193 in
Safety Factor 15 ul 15 ul
Stress XX -0.000485344 ksi 0.000260381 ksi
Stress XY -0.000292174 ksi 0.000341232 ksi
Stress XZ -0.0000696327 ksi 0.0000661472 ksi
Stress YY -0.000808251 ksi 0.000521871 ksi
Stress YZ -0.0000704546 ksi 0.0000675861 ksi
Stress ZZ -0.000139549 ksi 0.000115901 ksi
X Displacement -0.0000245288 in 0.0000388033 in
Y Displacement -0.000320115 in 0.0000184616 in
Z Displacement -0.00000439634 in 0.00000429194 in
Equivalent Strain 0.0000000000315013 ul 0.0000000218693 ul
1st Principal Strain -0.000000000014853 ul 0.000000015545 ul
3rd Principal Strain -0.0000000256996 ul -0.0000000000317809 ul
Strain XX -0.0000000142557 ul 0.00000000866164 ul
Strain XY -0.0000000126905 ul 0.0000000148213 ul
file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 9/25
24/4/23, 23:40 Stress Analysis Report

Strain XZ -0.00000000302447 ul 0.00000000287308 ul


Strain YY -0.0000000231436 ul 0.0000000146856 ul
Strain YZ -0.00000000306017 ul 0.00000000293558 ul
Strain ZZ -0.00000000347319 ul 0.00000000711658 ul

Figures

Von Mises Stress

1st Principal Stress

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 10/25


24/4/23, 23:40 Stress Analysis Report

3rd Principal Stress

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 11/25


24/4/23, 23:40 Stress Analysis Report

Displacement

Safety Factor

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 12/25


24/4/23, 23:40 Stress Analysis Report

Stress XX

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 13/25


24/4/23, 23:40 Stress Analysis Report

Stress XY

Stress XZ

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 14/25


24/4/23, 23:40 Stress Analysis Report

Stress YY

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 15/25


24/4/23, 23:40 Stress Analysis Report

Stress YZ

Stress ZZ

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 16/25


24/4/23, 23:40 Stress Analysis Report

X Displacement

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 17/25


24/4/23, 23:40 Stress Analysis Report

Y Displacement

Z Displacement

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 18/25


24/4/23, 23:40 Stress Analysis Report

Equivalent Strain

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 19/25


24/4/23, 23:40 Stress Analysis Report

1st Principal Strain

3rd Principal Strain

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 20/25


24/4/23, 23:40 Stress Analysis Report

Strain XX

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 21/25


24/4/23, 23:40 Stress Analysis Report

Strain XY

Strain XZ

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 22/25


24/4/23, 23:40 Stress Analysis Report

Strain YY

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 23/25


24/4/23, 23:40 Stress Analysis Report

Strain YZ

Strain ZZ

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 24/25


24/4/23, 23:40 Stress Analysis Report

file:///C:/Users/USER/Documents/Inventor/Part15 Stress Analysis Report 24_04_2023.html 25/25

You might also like