STR-W6200D Series

Power IC for PWM Type Switching Power Supply

with Low Noise and Low Standby Power
■ General Descriptions
The STR-W6200D series products are power ICs for switching power supplies,
incorporating a power MOSFET and a current-mode type PWM controller IC. The low
standby power is accomplished by the automatic switching between the PWM operation in
normal operation and the burst-oscillation under light load condition. The product achieves
high cost-performance power supply systems with few external components.

■ Features TO-220F-6

Current-Mode Type PWM Control

PWM with Jittering Function
The function reduces the EMI noise and enables simplified (low-cost) EMI filters.
The jittering period is adjustable by an external capacitor.

Auto-Standby Function
The burst-oscillation enables the low standby power.
Input Power PIN < 100mW at no load

Built-in Startup Circuit, enabling low power consumption

Overcurrent Protection (OCP) with Built-in Input Compensation Circuit
The function has less AC input voltage dependency.

Overload Protection (OLP) with Built-in Delay Timer ( the delay time is adjustable by an external capacitor)

External Latch Protection (ELP)
The function enables the latch shutdown by external signal.

Bias-Assist Function, reducing operating VCC voltage drop
The function improves the startup operation and makes a low VCC capacitor applicable.

Leading Edge Blanking Function

Slope Compensation Function

Built-in Avalanche Energy Guaranteed High-Voltage Power MOSFET

Various Protections
Overcurrent Protection (OCP)---------------------------------- Pulse-by-Pulse
Overload Protection (OLP) ------------------------------------- Auto-Restart
Overvoltage Protection (OVP) --------------------------------- Latch Shutdown
Thermal Shutdown Protection (TSD) ------------------------- Latch Shutdown

■ Applications
Switching Power Supplies for
Home Appliances (White Goods), Digital Consumer Equipment, OA Equipment, Industry Machines,
Communication Devices, Others

■ Product Lineup
fOSC MOSFET RDS(ON)(MAX)
Product No.
(kHz) VDSS (MIN) (V) (Ω)
STR-W6251D 67 650 3.95

STR-W6252D 67 650 2.8

STR-W6253D 67 650 1.9

2010/08
■ Typical Application Circuit

VAC
VOUT
PC1

GND
1 4
D/ST Vcc
PC2

PC2
Cont． FM/ELP External Latch Signal
7

FB
6

S/OCP GND
3 5

PC1

STR-W6200D

■ Typical Electrical Characteristics

STR-W6251D Power Supply Characteristics
Input: 85 - 264VAC, POUT: 10W (5V/2A)

Efficiency η効率η-出力電流Io
－ Output Current IOUT Input Power PIN－ Output Power POUT
入力電力Pin-出力電力Po
0.8
100
100 0.8
η(%)

Input Power PIN (W)

90
90 0.7
0.7
80
80 0.6 AC120V
120VAC
AC120V
0.6
70
120VAC AC230V
230VAC
70
入 力 電 力 P in [W ]

AC230V
230VAC 0.5
Efficiency

0.5
60
60
効 率 η [% ]

50 0.4
0.4
50
40
40 0.3
0.3
30
30
0.2
0.2
20
20
0.1
0.1
10
10
00 0.00
0.0
0 0.5
0.5 1.0
1.0 1.5
1.5 2.0
2.0 2.5
2.5 0.00 0.1
0.1 0.2
0.2 0.3
0.3 0.4
0.4 0.5
0.5
出力電流Io[A]
Output Current IOUT (A) Output出力電力Po
Power[W]POUT (W)

Warning

The contents in this document are subject to changes, for improvement and other purposes, without notice.
Make sure that this is the latest version of the document before use.

The operation and circuit examples in this document are provided for reference purposes only. Sanken assumes no liability for violation of industrial property, intellectual property, or other rights of
Sanken or third parties, that stem from these examples.

The user must take responsibility for considering and determining which objects the products in this document are used with.

Although Sanken will continue to improve the quality and reliability of its products,
semiconductor products, by their nature, have certain fault and failure rates. The user must take responsibility for designing and checking to secure the device and system so that a part failure may not lead
to human injury, fire, damages, or other losses.

The contents in this document must not be transcribed or copied without Sanken’s written consent.

SANKEN ELECTRIC CO.,LTD.

2010/08