SMARTCARE PREAPPLY HDPE 40

SmartCare PreApply HDPE 40 is a thick high density polyethylene membrane with a pressure-sensitive
adhesive. Unlike conventional membranes, this forms a bond with the wet concrete poured over it and
becomes monolithic part of the structure. This prevents water ingress tracking between the unbonded
membrane and structure.

FEATURES & BENEFITS CHEMICAL & PHYSICAL PARAMETERS

• Continuous adhesive bond to poured concrete • Membrane made of high density Polyethylene material
and pressure sensitized adhesive. Protective coating
• Unaffected by ground settlement and release liner is applied above this.
• Provides a barrier to water, moisture and gas • Colour: White
• Ready for placement of reinforcement bars • Dimensions: 1.2mm thickness, 1.2m width,
30m length
• Sound anti puncture performance
• Excellent chemical resistant to soil types
• Lateral water migration resistant
• Weather and UV resistant
• Resistant to acid and alkali

RCC Slab

Activated Pressure
Sensitive Adhesive
HDPE Composite Membrane

Mud Slab / PCC

TECHNICAL PARAMETERS

PROPERTY TYPICAL VALUE TEST METHOD

Colour White
Thickness 1.2mm ASTM D3767
Peel Adhesion to concrete >= 1200 N/m ASTM D903 modified
Resistance to Hydrostatic Head >70 m ASTM D5385 modified
Low temperature Fexibility -23 deg C Pass ASTM D1970
Puncture Resistance >950 N ASTM E154
Elongation >500% ASTM D412 modified
Tensile strength ( film) 28.2MPa ASTM D412
Crack cycling @-23 deg C Pass ASTM C836

CERTIFICATIONS
• CE certification

• PRI – Methane Gas permeability

• SGS – ASTM testing results

SMARTCARE PVC MEMBRANE
Non-reinforced Smartcare PVC Membrane, opaque, made of flexible polyvinyl chloride (PVC-P), with thin
yellow signal layer, designed for tunnels and basement works. This Membrane is not suitable for permanent
exposure to UV-radiation.

FEATURES & BENEFITS CHEMICAL & PHYSICAL PARAMETERS

• Hardly cusbustible • Colour: Yellow & black
• Resisitant to swelling, rotting and ageing • Dimensions: 2m x 20m
• Very high level of water tightness, even with • Shelf life: 5 years
permanent deformation
• Coverage: 40sq metres
• High capacity for adaptation to irregularities or
deformation of support due to its high
deformability and weld strength
• High resistance to puncturing
• Not resistant to bitumen, oil and tar

RCC Slab
Geotextile
PVC
Protection Layer
Lean Concrete / PCC

TECHNICAL PARAMETERS

PARAMETER ASTM/TEST STANDARD USED TYPICAL VALUE

Thickness EN 13491 2mm

Tensile Strength EN 13491 15N/mm2
Elongation EN 13491 250%
Tear Strength EN 13491 40
Root Resistance EN 13491 Excellent

CERTIFICATIONS
• NTH (WIP)
SMARTCARE WATERPROOFING MEMBRANE:
EPDM 1.2MM
SmartCare EPDM Membrane is a performed elastomeric waterproofing membrane made up of high quality
EPDM rubber. This membrane exhibits high tensile strength, elongation, tear strength and is also resistant to
weathering, heat ageing, ozone, UV rays, acids, alkalis & oxygenated solvents.

FEATURES & BENEFITS CHEMICAL & PHYSICAL PARAMETERS

• Long service life • Colour: Black colour textile finish rubber sheets
• High tensile and tear strength • Dimensions: 1.2 x 20m rolls, tolerance +/- 10%
• High elongation - more than 400% • Approval/standards: ASTM D 4637 & ASTM D 6134
• Zero maintenance cost provided, it is fixed as per • Shelf life: 24 months under specific storage conditions
the recommendation
• Additional dead load - negligible

Screed M20

Geotextile Film (250gsm)

SC EPDM Membrane
Geotextile Film (250gsm)

Lean Concrete M20/M25

as per site specification

TECHNICAL PARAMETERS

PARAMETER TESTING METHOD STANDARD VALUES TYPICAL VALUES

Chemical Base EPDM

Thickness (mm) ASTM 3767 1.3 + 10%
Unit Weight (kg)/m2 1.42
Tensile Strength, MPa ASTM D 412 Min 9 Min 10 MPa
Elongation at Break (L/T)% ASTM D 412 Min 300 Min 400
Tear Strength (lbs/inch) ASTM D 624 Min 26.27 Min 35
Adhesion Strength (N/mm) ASTM D 903 Min 9
Hydrostatic Water Pressure, Bars DIN 1048 No Leakage Passes 7
Shore ‘A’ Hardness ASTM D 2240 Min 60
Elastic Recovery ASTM D 412 Min 90

CERTIFICATIONS

STANDARD TESTING LAB

NTH ASTM D 4637-08
SMARTCARE WATERPROOFING MEMBRANE
SBS SELF ADHESIVE 2MM, 3.5MM
Asian Paints SmartCare Waterproofing Membrane is a SBS modified polyester sheet reinforced five layer
bituminous membrane for superior waterproofing. This membrane exhibits excellent tensile strength, tear
strength, puncture resistance and dimensional stability. Self Adhesive of the membrane is covered with silicone
release film for protection of the membrane.

FEATURES & BENEFITS CHEMICAL & PHYSICAL PARAMETERS

• Excellent flexibility • Chemical Property: SBS modified bituminous, polyester
fleece reinforced
• Cost effective and durable in comparison to
conventional low end waterproofing systems • ASTM Standard: ASTM D 6222-08
• Excellent water tightness if applied as per
recommended system and application
• Good temperature resistance to cold and
warm temperatures
• High tensile strength, tear and puncture resistance

RCC Retaining Wall

SmartCare Bitumen Primer

SBS Self Adhesive Membrane

(2mm - 3.5mm)

Geotextile Fixed Drain Board

(Mechanically Fastened)
Polymer modified Mortar at
joints and corners
Cement Screed (Optional)

TECHNICAL PARAMETERS

PARAMETER TESTING METHOD TYPICAL VALUES TYPICAL VALUES

(2mm) (3mm)

Thickness,mm ASTM D 5147 2 ± 0.1 3 ± 0.1

Unit Weight, Kg/Sq.m ASTM D 6164 2.617 3.207
Softening Point, (°C) ASTM D 36 110 100
% Elongation at break, Longitudinal ASTM D 5147 50 50
Tensile Strength Longitudinal, N/5 cm ASTM D 5147 600 700
% Elongation at break, Transverse ASTM D 5147 50 50
Tensile Strength Transverse, N/5 cm ASTM D 5147 400 700
Low Temp. Flexibility, °C ASTM D 5147 Pass at -18 Pass at -18
Tear Strength Longitudinal, N ASTM D 4073 311 700
Tear Strength Transverse, N ASTM D 4073 120 700
SMARTCARE APP MODIFIED
POLYESTER SHEET REINFORCED
BITUMINOUS MEMBRANE (2MM, 3MM, 4MM)
Asian Paints SmartCare Waterproofing Membrane is a five-layered system with APP modified polyester fleece
reinforced bituminous membrane for superior waterproofing. This membrane exhibits excellent tensile
strength, tear strength, puncture resistance and dimensional stability. The torch side of the membrane is
covered with polyethylene film for protection of the membrane.

FEATURES & BENEFITS CHEMICAL & PHYSICAL PARAMETERS

• Excellent flexibility • Chemical Property: APP modified bituminous,
polyester fleece reinforced
• Cost effective and durable in comparison to
conventional low end waterproofing systems • ASTM Standard: ASTM D 6222-08
• Excellent water tightness if applied as per
recommended system and application
• Good temperature resistance to cold and
warm temperatures
• High tensile strength, tear and puncture resistance

CERTIFICATIONS

STANDARD TESTING LAB

NTH ASTM 5147

TECHNICAL PARAMETERS

PARAMETER TYPICAL VALUES

Sample Description 2mm PY 3mm PY 4mm PY

Top Face Plain Finish Plain Finish Plain Finish
Thickness, mm 2 3 4
Unit Weight, Kg/m2 Min 2.5 Min 3.0 Min 3.90
Tensile Strength (N/5cm), Longitudinal 500 600 650
Tensile Strength (N/5cm), Transverse 450 550 600
% Elongation at break, Longitudinal 30 45 45
% Elongation at break, Transverse 30 40 40
Tear Strength, Transverse 400 350 330
Tear Strength, Longitudinal 250 320 320
Low Temp Flexibility, 0OC No Cracking No Cracking No Cracking
Softening Point (OC) > 150 > 150 > 150
Compound Stability at 110OC, 2 hrs No Flow No Flow No Flow
Dimensional Stability, 80OC No change No change No change
Resistant to Water Pressure @ 5Bar No Leakage No Leakage No Leakage
% Water Absorption Max 3 Max 3 Max 3
Lap Joint Strength, Longitudinal 550 650 650
Lap Joint Strength, Transverse 450 550 600
SMARTCARE FLEXI SEAL PU
SmartCare Flexi Seal PU is a modified PU coating which cures by reaction with atmospheric moisture and
forms a seamless highly elastic membrane for all below and above the grade waterproofing specifications.
SmartCare Flexi Seal PU is designed with a high solid content which gives a high film build up and has a
good adhesion to wide range of cementitious and masonry substrates. Due its liquid application nature it can
be applied to all substrates which exhibit high detailing.

FEATURES & BENEFITS CHEMICAL & PHYSICAL PARAMETERS

• Superior durability and thermal stability • Colour: Black viscous liquid
• Forms a seamless and tough waterproof barrier • Packaging: 20 litre epoxy lacquered metal drums
on curing
• Shelf life: 9 months from the date of packaging
• Superior flexibility and elongation of up to 600%
• Coverage: 1 litre / m2 on a smooth flat surface will
• Superior crack bridging ability (CBA) up to 2mm provide an adequate film thickness of approx. 1mm
• Excellent adhesion to wide level of masonry and
cementitious substrates
• Superior resistance to chemicals, mild acids and
alkali, corrosive soil conditions, resistance against
saline water and high suphate resistance. Easy to
apply coating by brush or spray

Lean concrete M20/M25

Smartcare Bitumen
primer (optional)

SmartCare Flexi Seal PU

SmartCare Bitumen Primer

Podium Slab

TECHNICAL PARAMETERS

PARAMETER TEST METHODS TYPICAL VALUES

Density, g/cm3 1.24
Solid by Mass,% 85% Max
Application Limits o C 5 – 60
Approximate Dry Time (20o C, 50% RH) 12 – 24 hrs. touch dry, 7 days full cure
Elongation % ASTM D412 600%
Tensile Strength MN/m2 minimum ASTM D412 2
Accelerated Weathering 12000hrs ASTM G154 No appreciable deterioration
Hydrolysis Resistance Excellent
Resistance to Industrial Environments Good
Storage Stability in Unopened Container 6 months
Crack Bridging Ability ASTM 836-84m Result: 2.6mm (20o C, 0.4mm thick EMB)
Hardness (Shore 00/ A) ASTM C836-05 90 / 50
Low Temperature Flexibility Crack Bridging No cracking
Adhesion-in-Peel (mortar) 6.5 lb./in
Extensibility after Heat Aging No cracking
Water Vapor Permeability * ASTM E96-05 Result: 22.2 g/( m2/24h)/1mm Hg

CERTIFICATIONS

STANDARD TESTING LAB

Smithers London Tensile testing, ASTM D412
Bureau Veritas Mumbai ASTM D412, ASTM D2240, DIN 1048
SMARTCARE QUARTZ CRYSTALLINE ADMIX
SmartCare Quartz Crystalline Admix (integral crystalline waterproofing admix) is added to the concrete mix
at the time of batching. SmartCare Quartz Crystalline Admix is composed of high quality cement, properly
selected & graded inert aggregates, proprietary waterproofing active chemicals & additives. It is used as a
chemically active waterproofing treatment for concrete. These active chemicals react with the moisture in
fresh concrete with the by-products of cement hydration to cause a catalytic reaction, which generates a
non-soluble crystalline formation throughout the pores and capillary tracts of the concrete. Thus, the concrete
becomes permanently sealed against the penetration of water or liquids from any direction. It is effective
against substances of high contact pH value.

FEATURES & BENEFITS CHEMICAL & PHYSICAL PARAMETERS

• Becomes an integral part of the concrete • Colour: Off White
• Permanent in nature • Available Packs: 25 Kg
• Effective against hydrostatic pressure from either • Dosage: 0.75% of cement weight
positive/negative surface of the concrete slab
• Less expensive than traditional methods
• Added to the concrete at the time of batching and
therefore is not subject to climatic restraints
• Seals hairline cracks up to 0.4 mm
• Non - toxic in nature
• Resists chemical attack like chloride, sulfate etc.
• Allows concrete to breath

TECHNICAL INFORMATION
• Appearance – Grey coloured free flowing powder
• Dosage – 0.75% of cement used
• Water reduction – Approx. 5% (checked in M 30 Mix Design)
• Workability – No change, as compared to control
• Setting time, initial & final – No change as compared to control
• Compressive strength, 28 days (ASTM C 109) – Min 5% increase over control
• Chloride (as Cl-) %, water soluble – 0.004
• Sulphate (as SO4=) % water soluble – 0.082
• Water permeability, 28 days (DIN 1048- Part 5) – More than 30% reduction over control
• Rapid chloride Ion penetration, coulombs (ASTM C 1202) – 48% reduction over control
• Length change, 28 days – 0.01% over control

CERTIFICATIONS

STANDARD DESCRIPTION TESTING LAB

ASTM C 876-15 Bipolar Inhibition Mechanism SETSCO
ASTM C 1202 Rapid Chloride Ion Penetration SETSCO
DIN 1048 Water permeability of concrete Veritas
SMARTCARE QUARTZ CRYSTALLINE COATING
Asian Paints SmartCare Quartz Crystalline Coating is composed of high quality cement, properly selected &
graded inert aggregates, proprietary waterproofing active chemicals & additives. It is used as a chemically
active waterproofing treatment for concrete. SmartCare Quartz Crystalline Coating when mixed with water
and applied as a brush coat to concrete, it penetrates deeply into the capillaries of the concrete to form
billions of needles like crystal which blocks the pores, voids & micro cracks in concrete. It is effective against
substances of high contact pH value

FEATURES & BENEFITS CHEMICAL & PHYSICAL PARAMETERS

• Becomes an integral part of the concrete • Colour: Grey
• Applied from either the positive or negative side • Available Packs: 25 Kg
• Effective against hydrostatic pressure from either • Dosage: 750 gm per sqm of powder i.e. 1050 gms of
positive/negative surface of the concrete slab mixed material for one square meter area.
Mixing ratio – Powder (5 parts): Water (2 Parts)
• Easy to apply by brush
• Applicable over green concrete
• Seals hairline cracks up to 0.4 mm
• Non- toxic in nature
• Resists chemical attack like chloride, sulfate etc.
• Allows concrete to breath
• Penetrates deeply to seal capillary tracts and
shrinkage cracks

Retaining wall

SmartCare Quartz
Crystalline Coating

Raft Slab
Lean concrete or PCC Slab

TECHNICAL INFORMATION
• Appearance – Grey coloured free flowing powder
• Application – Brush or spray
• Mixing ratio – Powder (5 parts): Water (2 Parts)
• Hardening time – 24 hrs
• Coverage – 0.75 – 0.85 kg/sq. mtr for 2 coats (can be varied depending on surface condition)

CERTIFICATIONS

STANDARD DESCRIPTION TESTING LAB

ASTM C 876-15 Compressive Strength SETSCO
ASTM C 1202 Rapid Chloride Ion Penetration SETSCO
DIN 1048 Water permeability of concrete Veritas
BS 6920 Suitable for Potable water SETSCO