PRE & POST LAMINATED PARTICLE BOARDS

COMPANY: ASIS LAMINATES

1. Key Features :
The widest range of sizes Eco-friendly products, made from wood from our own plantation Unmatched range of thickness Available in a host of aesthetic finishes and shades Homogeneous product composition Uniform thickness Dimensional stability High durability Water and moisture resistance Borer and termite resistant Fungus resistant Conforming to IS standards Very high abrasion resistance High surface resistance to heat, steam and stains High face strength Steep vertical density gradient Permanent bond of impregnated paper to the board High screw holding capacity High load bearing capacity

2. Advantages :
Easy to clean and maintain Consistent quality Adherence to international standards Economical board sizes resulting in minimal wastage Excellent acoustic properties High bending strength Excellent machinability Saves both time and labour The widest spectrum of applications Free from warpage and peeling of laminates Easy-to-install Ready-to-use

3. Applications ;
Building Panel doors Partitioning, Wall paneling, False ceiling, Exhibitions and many more and and flush doors, Construction: Flooring,

Industrial: Television, Speaker boxes, Sewing machine tops, Display Board, Blackboard, Automobiles and all other products which require furnishing, platform and covering from side, top and bottom and many more

Furniture: Cabinets, Storage units, Wall unit, Wardrobe, Kitchen cabinet, Book shelf, Audio-Video trolley, Dressing unit, Tables, Table tops, Sofa set, Shoe rack, Pelmets, Cots, Computer table, Workstations, Filing unit, Desks, Stools, Benches and many more

4. PHYSICAL AND MECHANICAL PROPERTIES OF PLAIN & PRE-LAMINATED PARTICLE BOARDS

Sr. No

Properties

Unit

Plain Particle Boards IS 3087 Grade-II Grade-I Grade-II

Pre-laminated Particle Boards IS 12823 Grade-I

1 2 3 4

Density Density Variation Moisture Content Modulus Of Rupture Up to 20mm thickness Above 20mm thickness Tensile Strength Perpendicular To Surface a) After cyclic test b) Accelerated water resistance test Water Absorption 2 Hours 24 Hours Thickness Swelling, 2Hours Soaking, Thickness, Length, Width Swelling Due To Surface Absorption Tensile Strength Perpendicular To Surface Up to 20mm thickness Above 20mm thickness Screw Withdrawal Strength Face Edge Abrasion Resistance 1) Type I 2) Type II 3) Type III

Kg/m3 % % N/mm2

500-900 +/-10 5 to 15 11 11

500-900 +/-10 5 to 15 15 12.5 0.2 0.15

500-900 +/-10 5 to 15 11 11

500-900 +/-10 5 to 15 15 12.5 0.2 0.15

N/mm2

40 80 12 0.5 0.5 9 0.3 0.3

10 20 8 0.5 0.5 6 0.45 0.40

15 30 8

7 15 5

8 9

% N/mm2

0.3 0.3

0.45 0.40

10

1250 700

1250 850

1250 750 450 250 80

1250 800 450 250 80

11

Revolution

LAMINATE FLOORING
COMPANY:ASIS LAMINATES
Good flooring is one of the most important aspects of both offices and homes. And this new millennium demands new solutions l ike laminated flooring. Made with pre-laminated HDF boards, our flooring has an overlay coating to give better abrasion resistance.

Our laminated flooring is actually highly adaptable, in which the design and dcor can be customized to suit anyone's aesthetic tastes. It is a great product for the more adventurous who prefer do-ityourself installations, making it perfect for anyone who wants to renovate both their homes and their lives.

Our Laminate flooring is manufactured with sophisticated, computerized technology to create realistic designs. The top wear layer is incredibly durable and easy to care. It is also impervious to most stains, spills, and burns and extremely scratch-resistant.

At ASIS, we are well aware of the inherent potential of this sector and have started a laminated flooring plant with a capacity of 50000 sq. mt. per month. We also have the latest technology to help create very realistic designs.

Backing - is a melamine plastic layer used to give additional structural stability and added moisture protection to the planks.

Core - made from high-density fiber board (HDF), the core adds impact resistance, and forms the tongue and groove locking system. Melamine plastic resins are also impregnated in the core to improve the moisture resistance of the core.

Melamine - is a plastic-type resin used throughout the construction process to add durability, and stability to the laminated board.

Print Film - which is also called the decorative layer gives the floor the appearance of a real hardwood or tile.

Wear layer - is a tough clear melamine layer with aluminum oxide particles. Using heat and pressure the wear layer becomes an incredibly hard and durable finish. The resin-filled wear layer is so dense it becomes extremely difficult to stain, scratch, or burn.

Underlayment - is a clear thin plastic sheet that is installed over the substrate before the laminate floor is floated. The plastic sheet helps the laminate floor to float freely above the substrate.

The flooring panel is a composite construction and consists of three main components:

A Laminate (HPL-High Pressure Laminate) A Substrate, specially designed Built-in Sound Bloc

At ASIS, we are well aware of the inherent potential of this sector and have started a laminated flooring plant with a capaci ty of 50000 sq. mt. per month. We also have the latest technology to help create very realistic designs.

Key Features ;
Visual Appearance is good Scratch Resistance is very good Stain Resistance is excellent Fade Resistance is excellent Impact Resistance is excellent Maintenance is very easy Moisture Resistance is good Can be Installed over concrete slabs Easy To Install Life expectancy of the floor is very high It is having incredible wear resistance Fire resistance is excellent Ensures sound reduction

Our Advantages ;
ASIS Laminate flooring is extremely impact and scratch resistant. ASIS Laminate floorings are extremely stain resistant and will not fade from ultra-violet sunlight, nor burn from cigarettes. Trims and moldings are available for laminate floors. ASIS Laminate floorings combine a realistic impression of wood and tile with an extremely durable finish. ASIS laminate floorings can be used anywhere within the home, including wet area. ASIS laminate floorings can be used over radiant heated concrete slabs. ASIS Laminate floorings can be used for: family rooms, living rooms, dining rooms, bedrooms and dens.

Applications ;

Homes, offices, shops, hospitals, malls, software institutions, colleges, universities, airports, labs, and many more.

Important Specifications

Our flooring comes in a thickness of 8 mm Available in two sizes - 4X 6 and 4X 8

TECHNICAL DATA FOR LAMINATED FLOORING

Fire Classification

EN 13501 DIN 4102 CSTB NTFire007 BS 476-7 EN 717 FLEC EN 13329 EN 13329 EN 425

Bf (-s) B1 M3 Class G Class 2 y E1 <0.05mg/h m2 > 9500 rev (AC 5; > 6500 rev) IC 3 + + No Damage

2 3 4 5 6

Formaldehyde emission VOC emission Wear resistance Impact resistance Resistance to Rolling castor (soft wheels)

7 8 9 10

Drum Sound reduction Impact Sound reduction Slip Resistance Slip Alert (www.slipalert.com)

EN13329 EN 13329 EN 14041

S10 17 - 19 dB Class Ds Dry > 0.65 (Low risk of slipping) Dry > 0.65 (Low risk of slipping)Wet > 0.30 (Moderate risk of Slipping)

11 12 13 14

Thermal Insulation Electrostatic Charge Thickness Swelling UPEC level

DIN 52612 EN 1815 EN 13329

0.07.m2 k/w < 2KV <10% U4P3E2C2

GREENLAM LAMINATES
Available in 1mm and 1.5mm thickness Additionally, we manufacture special sizes in laminate like 3 x 7, 4.25 x 10, , 5 x 12, and for compact laminates 5 x 6, 6 x 6 and 6 x 12 that suffice various interior design needs.