Scribd
Upload
41 views3 pages

Cube ConRep CR600 - Product Overview

The document summarizes a media converter/repeater device called the ConRep CR600. It is a modular, scalable, and managed device that supports SFP optical transceivers. It has a 2U chassis that can accommodate up to 6 units and includes redundant power and cooling. It supports hot-swappable line cards, auto-recovery functions, and SNMP management.

Uploaded by

PepePotamo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
41 views3 pages

Cube ConRep CR600 - Product Overview

The document summarizes a media converter/repeater device called the ConRep CR600. It is a modular, scalable, and managed device that supports SFP optical transceivers. It has a 2U chassis that can accommodate up to 6 units and includes redundant power and cooling. It supports hot-swappable line cards, auto-recovery functions, and SNMP management.

Uploaded by

PepePotamo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

SFP Media Converter / Repeater (ConRep CR600)

> scalable, modular, managed


Overview

The ConRep series is a simple and very flexible unit that combines protocol transparent connectivity with
support for SFP optical transceivers. The design of the ConRep makes it easy to implement a wide range
of signal boosting and media conversions all in a small and compact shell including two separate power
supplies.

Features

ConRep CR600

2U Chassis Rack Type

2U high, 19 (or 23) inch Chassis with convertible standalone units, Chassis accommodates up to 6
units.
Chassis with redundant AC/DC power, cooling FAN included.
Once the line card is installed, it is hot-swappable to avoid any other network downtime. Also, the
power does not have to be off when inserting another line card.
Supports an auto recovery function, the system can restore all functions back to normal working status
when the power or the connections is resumed.
SNMP management
TFTP firmware upgrade
Alarm Relay contacts

Applications
All optical communication systems like: Gigabit Ethernet, SDH, ATM, ESCON, Fibre Channel and
CATV

Specifications

Parameters ConRep CR600

Slot (6) slots in front for slide-in-module


(2) slots in front for power supply module

Power AC Power Module 90 ~ 264 VAC;


Frequency: 47 ~ 63 Hz
DC Power Module -18 ~ -56 VDC; 12V, 8.5A or -36 ~ -72 VDC
Power consumption: 25 W

Environment Temperature: 0 ~ 50 °C (Operating)


-20 ~ 70°C (Storage) All information contained herein is
believed to be accurate and is sub-
Humidity: 20-80% non condensing (Operating) ject to change without notice. No
10-90% (Storage) responsibility is assumed for its
use. Cube Optics AG, its subsidia-
ries and affiliates, or manufacturer,
Dimensions 440mm x 260mm x 89mm (WxDxH) reserve the right to make changes
without notice, to product design,
product components and product
Shipping Weight 4.8 kg (Not including any line-cards) manufacturing methods. Some
specific combinations of options
Compliance FCC part 15 class A, CE Mark may not be available. Please con-
tact Cube Optics AG for more
information.

V 3.0 1/3
Line Cards

SNMP Cards
Communicates with single or multiple chassis´s control card via RS-485 serial protocol.
Management control to Mux/Demux card, Protection card & Transponder Card.
SNMP v1 Trap, MIB file.
3 x 10/100M UTP ports.
2 x 100 FX (SFP) ports.
Supports Telnet access control.
Real-time Clock feature.
TFTP SNMP F/W upgradeable.
Supports web browser control feature (2nd stage).
Specifications
Power DC 12 V, 1.2A
Power consumption: 10 W

Environment Temperature: 0 ~ 50 °C (Operating)


-20 ~ 70°C (Storage)
Humidity: 20-80% non condensing (Operating)
10-90% (Storage)

Dimensions 162mm x 220mm x 25mm (WxDxH)

Shipping Weight 0.9 kg

Compliance FCC part 15 class A, CE Mark

Transponder Cards
The Transponder Cards may be used to convert 2 channels or to extend 2 channels. Each
transponder card provides 2 client SFP slots and 2 Line SFP slots.
Use Small Form Factor Pluggable (SFP) transceivers.
Data rate independent from 155 Mb/s ~ 2,67 Gb/s
Client input - 850 nm, 1310 nm and 1550 nm
Line output multirate SFP 155 Mb/s ~ 2,67 Gb/s
Unamplified extension up to 80 km

Protection Cards
The protection card provides redundant fiber protection with automatic fall back to
second fiber cable in case of primary failure.
1 + 1 full optic protection
Wide operation wavelength
Fast switch speed
Low insertion loss
Low channel cross talk
Highly reliable and stable
Low power consumption
Specifications
Power DC 12 V, 1.2A
Power consumption: 1ch 5W; 2 ch 10W

Environment Temperature: 0 ~ 50 °C (Operating)


-20 ~ 70°C (Storage)
Humidity: 20-80% non condensing (Operating)
10-90% (Storage)

Dimensions 162mm x 220mm x 25mm (WxDxH)

Shipping Weight 0.9 kg

Compliance FCC part 15 class A, CE Mark

V 3.0 2/3
Ordering Information

Indicate your requirements by selecting one option from each configuration table. Please write the
corresponding codes in the available boxes to form your part number. For more information on this or
other products and their availability, please contact Cube Optics AG at +49-6131-69851-0 or via e.mail at
[email protected], or visit our website at www.cubeoptics.com.

Main Chassis
CR06-9021 19" 2U 6 slots Chassis

Power
CR06-9110 AC power supply (90 to 264 VAC)
CR06-9120 DC power supply (+/-18 to +/-56 VDC)
CR06-9121 DC power supply (+/-36 to +/-72 VDC)

SNMP
CR06-9210 SNMP card

Transponder Line Cards for ConRep600


CR00-8011 1.25 Gbps Transponder card (without SFP Fiber Transceiver), 1 channel
CR00-8012 1.25 Gbps Transponder card (without SFP Fiber Transceiver), 2 channels
CR00-8021 2.5 Gbps Transponder (without SFP Fiber Transceiver), 1 channel
CR00-8022 2.5 Gbps Transponder (without SFP Fiber Transceiver), 2 channels

Optical Line protection for ConRep600


CR00-8210 optical line protection

Corporate Office: phone: +49-6131-69851-0


Cube Optics AG fax: +49-6131-69851-79
Robert-Koch-Strasse 30 [email protected]
55129 Mainz / Germany www.cubeoptics.com
V 3.0 3/3

You might also like