TECHNICAL SPECIFICATIONS Global international operation Whenever & Wherever

INSTRUCTION MANUAL Product type Mini Wi-Fi Switch Module You are,All-in-one Mobile App INSTALLATION
Voltage 100-250V AC Warnings:
Super Mini Current: 16A 1.
Wi-Fi Switch Module Max. load 3680W/300W for LED electrician in accordance with local regulations.
Operation 2.4GHz~2.4835GHz Schedule timer Voice control-work
with google home
Voice control-work
with Amazon Alexa
Device Sharing
2. Keep the device out of reach of children.
QS-WIFI-S06-16A frequency WiFi 802.11 b/g/n
Operation temp. -10ºC - +40ºC 3. Keep the device away from water , damp or hot
Reset button Anywhere
Operation range ≤ 200 m
APP
environment.
Dims (WxDxH) 39X39X15 mm 4. Install the device away from strong signal sources
IP rating IP20 such as microwave oven that may cause signal
Warranty 1 years interruption resulted to abnormal operation of the
device.
39 MM

5. Obstruction by concrete wall or metallic

materials may reduce the effective operation
range of the device and should be avoided.
APP 6. Do NOT attempt to disassemble,repair or modify
39 MM 15 MM the device.

Inhouse local operation

APP

Apps Router Voice control Ordinary Switch Power switch

(optinal)

Without switch FAQ

MANUAL OVERRIDE Q1: What should I do if I can’t configure the switch APP USER MANUAL
module?
The switch module terminal reserves the access of a. Please check whether device is powered on.
manual overr id
ide
e functio
fun ction
n for the en d-
d-user
user to sw itc
itchh on/of
on /off.f. b. Make sure your mobile and switch module
are under the same 2.4 Ghz WIFI network.
• Switch on/off for permanent on/off function. c. Whether it’s in good internet conditions.

Notes: d. Make s ure the pas s word entered in App is correc t.

1) Both the ad
adjustment
justment on A pp and sw it
itch
ch can overw rit
rite
e e. Make sure the wiring is correct.
each other, the last adjustment remains in memory. Used to Outlet Q2: What device can be connected to this Wi-Fi switch
module?
2) The App control is synchronized with the
Most of your household electrical appliances can be,
manual switch. such as lamps, laundry machine, coffe maker, etc. IOS APP Android APP
Q3: What happens if the WIFI goes off?
You can still control the device connected the switch
module with your traditional switch and once WIFI is
With one switch active again the device connected to module will
connect automatically to your WIFI network.
Wiring Instructions and Diagrams Scan the QR code to download Smart Life App, or
Q4: What should I do if I change the WIFI network or you can also search keyword “Smart Life ” at App
1.Turn off the power supply before carrying out any change the password?
electrical installation work. Store or Google play to download App.
You have to re-connect our Wi-Fi switch module to the
2.C onnect wires according to the wiring diagram. new Wi-Fi network accordingly as per the App User Manual.
3.Ins ert the module into the junction box.
Q5: How do I reset the device?
4.Turn on the power s upply and follow s witch module
configuration instructions. 1. Turn on/off manual switch which is connected to the device Smart Life - Smart Living
until the indicator light flash quickly.
Notes: Take your smartphone close to the switch 2. Power on/off device for 5 times until the indicator light flash.
3. Hold the reset button for 10 sec. until the light indicator flash.
sure you have min. 50% Wi-Fi signal.
 Cancel Add Device Add Device
Add manually Search Device

Region
Electrical Add Device
Smart
that light blinks rapidly
Lighting Lighting Lighting
Mobile number/e-mail address
Devices Devices
Home (bluetooth)
Appliance...
Obtain verification code
kitchen

Security Lighting
& Sensor Help
Devices
(ZigBee)
sport Confirm light blinks rapidly
& Health
Log in or register your account with your mobile After the wiring of switch module is done, press
the traditional switch to turn ON/OFF cycle for
code sent to your mobile or mail box, then set your 5 times (keep time interval not too short) until
Make sure your smart phone and Wi-Fi switch
login password. Click "Create Family" to enter into Open the APP, selecting "+" on top right to add module are under the same Wi-Fi network at
the APP. device. Choose the type of device, for example
If the WIFI module is used only for a power outlet "Smart Lighting".
without a tradicional switch, you have to turn ON/OFF
cycle the power braker for 5 times
(keep time interval not too short)

Connecting APP
Make sure your router,mobile,and
device are as close as possible More
All Device

Ap
p
Basic information about the device

sc
on
Device name

t ro
2% Device added successfully Device Location

l
Check network

WI-FI Switch Supported Third-party

Control Others
module E3S
Voice control
Device found Shared devices
Register device to the smart cloud
Initializing device Create Group
amazon Google
alexa Assistant Device information
Feedback
Others

Enjoy your smart life of home automation for

Connect to amazon alexa or Google Assistant lighting control by using our All-in-one mobile
When pairing is done, the Wi-Fi switch will be for voice control, or share the devices with your app wherever you are in the world or simply by
shown on the App. families or friends. voice control when you are sitting at home
Now you can control your device with your comfortably.
The connecting will take about 10-120 seconds to
complete depending on your network condition. smartphone