Scribd
Upload
26 views2 pages

Purus 42 CF

This document summarizes specifications for Purus 42 CF mild steel wire for gas metal arc welding. It is a non-copper coated solid wire made of carbon-manganese steel alloyed with manganese and silicon. It can be used with either a gas mixture or pure CO2 as a shielding gas. The wire produces a clean weld bead with low fumes and spatter. It is suitable for robotic applications at high deposition rates and has typical tensile strengths of 470-570 MPa and elongation of 25-30% when welded.

Uploaded by

luis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
26 views2 pages

Purus 42 CF

This document summarizes specifications for Purus 42 CF mild steel wire for gas metal arc welding. It is a non-copper coated solid wire made of carbon-manganese steel alloyed with manganese and silicon. It can be used with either a gas mixture or pure CO2 as a shielding gas. The wire produces a clean weld bead with low fumes and spatter. It is suitable for robotic applications at high deposition rates and has typical tensile strengths of 470-570 MPa and elongation of 25-30% when welded.

Uploaded by

luis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MIG/MAG WIRES (GMAW)

MILD STEEL WIRES

Purus 42 CF
A non copper coated, G3Si1/ER70S-6 solid wire for GMAW of carbon-manganese steels. Purus 42 CF is particularly suited to be used in general construction,
automotive components and mobile machinery industries. The wire may be welded with either a gas mixture or with pure CO2 as the shielding gas. Purus 42 CF is
designed to give a clean weld bead with a minimum of silica islands, low fumes and extremely low spatter levels. The wire is suitable for robotic applications at high
deposition rates.

Specifications
Classifications EN ISO 14341-A : G 38 3 C1 3Si1
EN ISO 14341-A : G 42 4 M20 3Si1
EN ISO 14341-A : G 42 4 M21 3Si1
EN ISO 14341-A : G 3Si1
SFA/AWS A5.18 : ER70S-6
Approvals CE : EN 13479
CWB : B-G 49A 3 C1 S6
DB : 42.039.44
DNV-GL : III YMS (C1)
DNV-GL : III YMS (M21)
DNV-GL : III YMS
VdTÜV : 19260

Alloy Type Carbon-manganese steel (Mn/Si-alloyed)

Typical Tensile Properties


Condition Yield Strength Tensile Strength Elongation
EN 92Ar 8CO2
As Welded 475 MPa 570 MPa 26 %
EN 80Ar 20CO2
As Welded 470 MPa 560 MPa 25 %
AWS CO2
As Welded 420 MPa 530 MPa 30 %
EN CO2
As Welded 430 MPa 530 MPa 24 %

Typical Charpy V-Notch Properties


Condition Testing Temperature Impact Value
EN 92Ar 8CO2
As Welded 20 °C 150 J
As Welded -40 °C 75 J
As Welded -30 °C 100 J
EN 80Ar 20CO2
As Welded -40 °C 80 J
As Welded 20 °C 130 J
As Welded -30 °C 90 J
AWS CO2
As Welded -30 °C 80 J
EN CO2
As Welded -30 °C 75 J
As Welded 20 °C 110 J
As Welded -40 °C 65 J

esab.com/fillermetals
MIG/MAG WIRES (GMAW)

MILD STEEL WIRES

Purus 42 CF

Typical Wire Composition %


C Mn Si
0.08 1.45 0.85

Deposition Data
Diameter Current Voltage Wire Feed Speed Deposition Rate
0.8 mm 60-200 A 18-24 V 3.2-10.0 m/min 0.8-2.3 kg/h
0.9 mm 70-250 A 18-26 V 3.0-12.0 m/min 0.9-3.5 kg/h
1.0 mm 80-300 A 18-32 V 2.7-15.0 m/min 1.0-5.5 kg/h
1.14 mm 100-350 A 18-34 V 2.6-15.0 m/min 1.2-7.0 kg/h
1.2 mm 120-380 A 18-35 V 2.5-15.0 m/min 1.3-8.0 kg/h
1.32 mm 130-400 A 19-35 V 2.4-15.0 m/min 1.5-8.5 kg/h
1.4 mm 150-420 A 22-36 V 2.3-12.0 m/min 1.6-8.7 kg/h
1.6 mm 225-550 A 28-38 V 2.3-10.0 m/min 2.1-9.4 kg/h

esab.com/fillermetals

You might also like